CUA: Cannot generate partner profile

Hi,
I´am implementing CUA in ower landscape. I have the RFC´s and users with their specific roles in Central and child systems, but also I´ve registered the logical systems in BD54 both parts. I had no problems with this SAP process .
Recently I began to add a new child system(CRM 7.0) when I save this in tx:SCUA all the steps are ok but the message: "Cannot generate partner profile" appears in the last step. I have reviwed users, roles, RFC´s and logical systems, all is OK.
I was looking FOR some information about partner profiles:
http://help.sap.com/saphelp_nw70/helpdata/en/ea/9abf3b4f995f1ce10000000a114084/frameset.htm
and I found that partner profiles type LS are managed by tx:we20.
I found in child system that partner profile CRDCLNT100 alredy exist, this is what the SCUA wants to go to create.
I found also in child system that in transaction BD64 there is not any CUA entry.
Do you know how to solve this problem.
Thanks in advance
Enrique.

Hi Enrique.,
you have not generated partener profile.
Go to BD64 in your parent system then click on change ->Add BAPI then enter the required details.
there is one field obj.name/reference enter details for both object one by one.
first for user and click on ok and then for usercompany then click on save.
Go to environment menu then click on generate partener profile then click on execute and all must be in green.
After that go to EDIT menu->Model view->distribute select the child system which you want to add and then click ok.
If you have multiple client then do same steps for all client.
After that add system to SCUA.
Regards
Arti

Similar Messages

Generating partner profile for File to Idoc(CREMAS) scenario.

Dear friend,
Completed all the steps in SLD, IR and ID.
I do not know how to create Partner profile and I skipped this step.
While testing I got the error "Unable to convert sender service to an ALE logical system".
I think i got this error because I have not created partner profile.
Could anybody tell step by step process of creating partner profile including logical system names( Sender and Receiver)?
I have seen many blogs and i couldn't get clear picture on how to generate partner profile.
My sender system is XI server and receiver is R/3.
I have created RFC destination, Port also.
Thanks in Advance
Chiru

generally u create partner profiles using transaction WE20.
SAP Menu -> Tools -> IDoc Interface/ALE -> Administration -> Runtime Settings -> Partner Agreement (WE20).
go through this link for step by steps
http://help.sap.com/saphelp_nw2004s/helpdata/en/dc/6b808e43d711d1893e0000e8323c4f/content.htm
http://www.thespot4sap.com/Articles/SAP_ALE_Configuring.asp

Generating partner profile in idoc

hello experts,
When i am generating partner profile, following error is generated.
Port could not be created
RFC destination 0000000810 not specified for system 00000000810.
enter the rfc destination and restart the generation.
what is solution for the error?
Edited by: amar_war on Mar 6, 2011 8:28 AM

Actually I have already created rfc connection......
i have connected 2 clients 800 and 810.
in 800 i have created rfc connection for 810
in 810 rfc connection for 800.
i have also created ports....... but its still giving me error...
is my process is wrong to create rfc connection?

ERROR WHEN GENERATING PARTNER PROFILE

I AM GETTING THE FOLLWING ERRORS WHEN GENERATING PARTNER PROFILE
Outbound parameters for message type MATMAS MATMAS05 could not be created
Please enter a valid value for the output mode
Outbound parameters for message type SYNCH SYNCHRON could not be created
Please enter a valid value for the output mode

Hi Willard,
Checl the output mode and outbound parameters for those both of message types.
Hope this helps you..
Regards,
Kumar.

Generating partner profile

Hi all,
I am trying to generate partner profile but it is showing error as
NO MESSAGE HAVE BEEN DEFINED FOR SELECTION CONDITIONS IN THE MODEL.
what could be problum?
Thanks in advance,
Shashikanth

Totally agree with Sanjay, have you checked the logical system name for your client (Txn. SCC4, Double click on your client number and Note the logical system name). Check your distribution model if there is any message going out or coming into this logical system. If yes then check the parameters/select-options used for generating partner profile.
Cheers,
Sanjeev

What is the difference between generate partner profile and creat partner

What is the difference between generate partner profile and creat partner profile ?

Create Partner ProfilesAlthough partner profiles are usually created automatically, because of the unusual inbound and outbound profiles needed on the same system, the manual generation of certain profiles is required.
The following subsections describe the partner profile settings for the standard client (assumed here to be ALExxxCyyy), as well as for the corresponding dummy client (assumed to be DUMxxxCyyy). The dummy client partner profiles should have been generated by the automatic generation process completed previously. Nevertheless, these should be checked to ensure that all profiles exist.
Generation of Partner Profiles
The following messages should be added to the 4xx-ORDR model for ALExxxCyyy to DUMxxxCyyy on the reference client:
ORDERS
ORDCHG
ZINVRV
ORDRSP
INVOIC
FIDCMT
The partner profiles should first be generated using the standard auto-generation procedure on the reference client (for SYNCH messages to be created).
This model should now be distributed to the both ALExxxCyyy and DUMxxxCyyy.
The partner profiles should now be generated on the client being configured (i.e. yyy) using the auto-generation procedure defined in the standard ALE configuration procedures.
Generate partner profiles for sending system. (Can only do this if at least 1 message type exists against the sending system's LS). This automatically generates the port if the LS and RFC name are the same.
generate partner profiles tcode BD82
creating partner profiles tcode WE20
 There are two methods for maintaining the partner profile:
 Maintain partner profile manually:
To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Target system. Under Outbound parameters, choose the Create outbound parameters icon, and enter the values for the outbound parameters according to the slide Sender: Partner Profile (outbound).
To navigate to the partner profile in the sender system, choose Partner profile -> Partner type of Logical System and click on the required Sending system. Under Inbound parameters, choose the Create inbound parameters icon and enter the values for the inbound parameters according to the slide Sender: Partner Profile (inbound).
 Generate partner profile:
Prerequisite: The current distribution model is distributed to all participating systems.
In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (outbound)
In the sender system, choose: Generate Partner Profile, then check the result in the partner profile (inbound)
Regards
Vasu

Problem BD64- Generate Partner Profile

Hello everybody,
After creation the model view in the transaction SCUA i go in the transaction BD64 and i try to generate the partner profile to the child systems but i got an error as below:
Object type US, ID BASIS unknown (please observe upper/lower case)
    Message no. E0624
Diagnosis
Object BASIS of type US is not known in the system.
Procedure
Enter a valid object and check the type.
    Make sure upper case and lower case are used correctly.
Somebody can help me?
Best Regards,
Fábio Karnik Tchobnian

Hi,
your question is not really related to SQL Server but to the CUA. Please post your question in a different forum (Netweaver Administrator maybe) and I am sure you will get answer there.
Sven

Error while generating Partner profiles

Hi,
I am not able to crate the Partner profile. When I try to Generate the Partner Profiles from the Distribution model (Masterial Master) it give me following error,
"Outbound parameters for message type MATMAS MATMAS05 could not be created
Please enter a valid value for the output mode
Outbound parameters for message type SYNCH SYNCHRON could not be created
Please enter a valid value for the output mode"
Can anybody tell me how to solve this problem??
Thanks in stack.

How did you try to generate the Partner profile?
Can you pls try the following...
execute report "RBDCUS15" and give the model view/partner for which the entries needs to be generated.
Also, give the appropriate values for "Outbound Parameters" like version, packet size and output mode.
Thanks,
Renjith

BD64 - generate partner profile - outbound parameter; wrong receiver port

Hi all,
I'm using a distribution model (transaction BD64) for creating partner profiles in my system.
This works fine, exept for one thing.
The receiver port used in the outbound parameter is wrong.
It's using the tRFC port of the destination system instead of the tRFC port of the SAP XI/PI system.
If I send an Idoc it's now going directly to the destination system instead of going to XI/PI first.
I could modify this manually (which is a lot of work), but I would like to know how SAP determines which tRFC port is used when generating the partner profile and creating the outbound parameters.
Can anybody help me with this?
Reagrds,
Roy

Hi,
According to my knowledge, if you have a receiving logical system name is same as the RFC destination name, then the SAP will take the RFC destination properly and will generate the port automatically (for Ex: if you have a port A00..12 then it will create a port A..13). the generated port will be used in partner profile.
Or
Give a try by assign the RFC destination (The receiving logical system name and RFC destination name should be same) for a port and use it while generating the partner profile by using BD64 or SALE.
Regards,
Venu V

Generate partner profile

hi guys
i hve got a problem
when i generate a partner profile i get an error "NO ACTIVE PLAN VERSION EXITS" for type parameter

Hi,
According to my knowledge, if you have a receiving logical system name is same as the RFC destination name, then the SAP will take the RFC destination properly and will generate the port automatically (for Ex: if you have a port A00..12 then it will create a port A..13). the generated port will be used in partner profile.
Or
Give a try by assign the RFC destination (The receiving logical system name and RFC destination name should be same) for a port and use it while generating the partner profile by using BD64 or SALE.
Regards,
Venu V

Generating a partner profile

Hello Gurus,
In BD64 I am trying to generate a partner profile for R/3 to BW system. The RFC destination has been defined correctly.
And WE20 is also maintained in both the systems.
After defining the message types RSSEND, RSINFO and RSRQST in BD64, I am trying to generate partner profile.
But I get an error 'System XXX111 cannot be created as a partner system'.
what can be the issue.
Kindly guide.
Regards,
NIKEKAB

Rersolved

Partner profile LS PIBCLNT100 SYNCH does not exist

Hi!
I try currently to configure a IDoc to IDoc scenario for SAP ECC 6.0 system with following business 2 systems:
ERP:100 (Sender)
ERP:200 (Receiver)
and XIB:100 (XI system)
I successfully created a message type u201CZCREMRu201D and generated the model view in tcode BD64.
Unfortunately when I try to distribute the model and choose my XI system I get the following error:
Target system: XIB:100
RFC destination for synchronous communication (message type SYNCH)
Partner profile LS PIBCLNT100 SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
Questions:
Where do I need to create a partner profile for SAP PI (XIB:100)?
Which message type do I need?
Which parameters inbound/outbound and which process codes do I need?
Thank you very much!
regards
Thom

Hi!
Many thanks!
Unfortunaltely I cannot find the process code "SYNCHRON"
for message type "SYNCH".
Could you tell with process code do I need for the message type "SYNCH"?
How is it possible to create a new process type and assign them to message type?
Thank you very much!
regards
Thom

Problem while generating pertner profile

hi ,
all.
while sending master data through ale we need to configure bd64(model view)
and go to menu-environment-generate partner profiles--when i am doing that i am getting
a message as
NO MESSAGE HAVE BEEN DEFINED FOR SELECTION CONDITION IN THE MODEL.
generally we need to get the successful port generation etc..
can any one help me in this regard as i cannot proceed further.
thanks in advance.

have you inserted the message type in the Model related to which the data needs to be sent across the systems (using add message type)?
Regards,
Abhishek

Generation Partner Profiles from ALE Distribution Model

Hi ABAP/EDI experts,
I am a trainee. I am getting training from Pvt consultancy. I am working on SAP Demo systems.
I am trying t generate an IDoc using ALE method.
IN SALE window, I created two logical systems,ZVK_SS_800 and ZVK_SS_820. I assigned them to two clients 800 and 820 respectively.
In SM59 i created an RFC connection ZVK_RFC004 of type 3. Here I gave the client Number as 820. ( I'm not sure what to give)
In BD64, I created an ALE Model and added the message type MATMAS with Sending and Receiving Logical systems.
From the Environment drop down menu , selected generate partner profiles and executed with defaults checked. ( Transfer IDocs Immediatley and Trigger Immediately).
I got the following log.
Log For Partner Profile Generation:
Partner:
In Green Color
Partner ZVK_SS_800 as partner has been Created ( Sending System)
Partner ZVK_SS_820 as partner has been Created (Receiving System)
Port:
In Red Color
Port Cloud not be Created
RFC destination ZVK_SS_820 not specified for system ZVK_SS_820
Enter the RFC destination and Restart the generation.
Please help me to fix this probelm.
Any kind of Help will be surely rewarded.
Thanks,

From SM59, you can Test your RFC Connections between Clients. I would do this from Client 800 and test the Connection to Client 820. If that checks okay, I would then try SM59 on Client 820. Check the RFC Connection from Client 820 to Client 800. Be sure you have your Logical Systems defined on Both Clients. You can also double click on your Error Message to see if there is a Long Text Available that might give you further information as what needs to be corrected. I am not an Expert in this area, but have setup several ALE Models for my Variant Configuration without any problems. If you could include your EMail Address on your Business Card I could EMail you my instructions. Your Basis person may also be able to help you based upon your Error Message.

Create a partner profile for message type - 'CRMXIF_ORDER_SAVE_M'

Hi
I am trying to create IDOC generateion through LSMW.
i AM GETTING THE MESSAGEcreate a partner profile for message type - 'CRMXIF_ORDER_SAVE_M'
How do I create this profile??????

Hi,
Execute transaction BD64.
Identify you distribution Model,
Select the leaf node, and from menu select
Environment->Generate Partner Profile
Here in you specify 'Output mode' and 'Processing Mode'.
Click on Execute.
Check if any error occurs (Marked with Red color).
Try creating the IDOCs
Best Regards,
Pratik Patel
Reward with points if it is of any help to you!

CUA: Cannot generate partner profile

Similar Messages

Maybe you are looking for