CUA environment - changing the initial password of a user.
Hi Gurus,
I've encounter a perculiar issue when I assign an initial password to a user.
My system setup is based on CUA where my Central admin is client 100, with child client 200.
- I create an ID in client 100, set it to system 200, set initial password as "passW0rd". Save
- The ID was created in 200
- Logged in Client 100 using ID and "passW0rd", prompted for new password (i canceled the login)
- When back to client 100 CUA, in SU01 I select ID and click "EDIT", under the logon data I retype the initial password to "P4ssword"
- checked SCUL, it's green and user change
- Logged in Client 100 using ID and "P4ssword", error in password
- tried the old "passW0rd", prompted for new password.
I puzzled why the CUA did not redistribute the changed initial password to client 200, another can any ideas?
I also tried SU01 and click "reset password" button instead of "edit", the changed password was able to distributed to client 200.
By password change is ok this way or not ok if change within edit mode?
Thanks,
Jansen
Hi Sergo,
Yes I realise the "change password" works but for my case I cannot use that function. Any other suggestions. Cos by right even if I were to change in the logon data it should work right?
Hi Juan,
Yes I've checked, the IDOCs are in and successful.
Similar Messages
-
GRC 10: Initial password for multiple users creation in a ARQ request???
Hi All,
I was trying to create a request in ARQ for multiple users. I noticed that, I could add all the necessary required information for multiple users using the template. I added the roles as well. However, I could not set the initial password for multiple users as the tab "User System Details" (where the initial password is provided for a single user) is disabled!!!
The users were successfully created in the R/3 system. However, due to non-availability of initial password, these users could not log into the R/3 system.
May I know how to set the initial password for multiple users?
Regards,
faisalVit,
I was trying to test this multiple user creation scenario. But I am surprise to get a template where in I have only below mentioned fields:
1. User Name
2. User Id
3. Email
I filled these details and uploaded. Then filled the "User Access" details. While submitting the request, I got the error:
"Last name is not mentioned for user id XXX"
But there is not such column in provided template by GRC!
I added 2 columns: First Name and Last Name and saved it and uploaded again. These details are not picked up!
Following are the only columns shown:
1. User Name
2. User Id
3. Email
4. Manager
Out of above, only "Manager" field is editable and others are disabled.
Last time I remember, I has got complete template with all the columns. Unfortunately, I have deleted it and not available with me now.
Any idea you have why am I getting such incomplete template?
Regards,
faisal -
My mum set up an iCloud account for my iPhone 4 but forgot the password. This caused me to create a new account, and it can be used for the App Store and iTunes and all that, but I can't change the initial iCloud account (the one my mum made). My device keeps prompting me for the password every few minutes after updating to iOS 8, and I've tried every option possible to retrieve the password, but I don't even know the answers to the security questions and I can't find the password reset email anywhere and I don't know the back up emails my mum used. I literally cannot find any legitimate way to sign out of the initial iCloud account without entering a password (which neither I nor my parents know). Is there a way for me to retreive the password or change to my new account without the password?
See:Creating an iCloud account: Frequently Asked Questions and How do I mange iCloud account about 3/4s of the way down.
-
How to change the Default Password on AP1131AG
Hi all :
I tried to change the default password Cisco to other by command line but the password cannot work out.
The command line I used are as below :
AP#conf t
Enter configuration commands, one per line. End with CNTL/Z.
AP(config)#enable pass
AP(config)#enable password 4dMINO123 ?
LINE <cr>
AP(config)#enable password 4dMINO123
AP(config)#exit
AP#wr
*Mar 1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
AP#exit
This still cannot cahnge. Below I do again below commands :
AP(config)#enable secret
% Incomplete command.
AP(config)#enable secret ?
0 Specifies an UNENCRYPTED password will follow
5 Specifies an ENCRYPTED secret will follow
LINE The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
AP(config)#enable secret 5
% Incomplete command.
AP(config)#enable secret 5 ?
LINE The ENCRYPTED 'enable' secret string
AP(config)#enable secret 5 LINE
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
AP(config)#enable secret LINE
AP(config)#exit
AP#
*Mar 1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
AP#
AP#exit
After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
AP con0 is now available
Press RETURN to get started.
AP>en
Password:
Password:
Password:
% Bad secrets
AP>en 0
AP>en 5
% No password set
AP>en 15
Password:
Password:
% Password: timeout expired!
Password:
% Bad secrets
AP>
AP>
AP>en
Password:
Password:
Password:
% Bad secrets
thanks and best regards,
tangsuanHi, I have even the worst problem,
that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
Here is my desperate situation :
Nothing from this page helped :
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
Situation after hard reset:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6879232
flashfs[0]: Bytes available: 9119744
flashfs[0]: flashfs fsck took 43 seconds.
Base ethernet MAC Address: 00:22:55:9f:fc:a0
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 1 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6879232
flashfs[1]: Bytes available: 9119744
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number : 73-8962-14
PCA Assembly Number : 800-24818-13
PCA Revision Number : A0
PCB Serial Number : FOC12354426
Top Assembly Part Number : 800-29144-03
Top Assembly Serial Number : FCZ1238Q0HK
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Press>en
Password:
Password:
Password:
*Mar 1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
% Bad secrets
Press>en
Password:
Password:
Password:
% Bad secrets
Press>
*Mar 1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
Press>en
Password:
Password:
Press>sho ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Press uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number : 73-8962-14
PCA Assembly Number : 800-24818-13
PCA Revision Number : A0
PCB Serial Number : FOC12354426
Top Assembly Part Number : 800-29144-03
Top Assembly Serial Number : FCZ1238Q0HK
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-E-K9
Configuration register is 0xF
Press> -
System does not prompt to change the initial passwd
hi,
While trying to login to the SAP system with my initial password, the system does not prompt me to change my initial passwd and lets me in, could anyone let me know how can i change the system to force change the initial passwd.
thank you
JonuPlease provide more details about "your system".
Typically causes:
- Your user ID is either of type SERVICE for which password changes are not required and they cannot change their own passwords either. So you are "consuming" a service and prior authentication does not have anything to do with the authentication of the SAP system.
- You are logging on from an external client system which is calling RFC's to logon to the SAP system. By default, this only prompts for password change or rejects the logon attempt if you instruct the system to do so.
Please provide more details.
Cheers,
Julius -
Facing an error when change the sysadmin password
hi expert,
when i am going to change the sysadmin password i m facing the below error on linux in production environment. i cant understand why this error occured. i change the sysadmin password many times but never get any error. when going to change the sysadmin password the production instance is open.
[applprod@oracleerp ~]$ FNDCPASS apps/apps 0 Y system/manager USER SYSADMIN sys@adm!n
-bash: !n: event not found
plz suggest how can i resolve the above error.
thanks & regards
pritesh ranjanHi Pritesh Ranjan,
plz suggest me one thing can i change sys password directly without down the ebs application same as system user.
exp -
alter user system identified by manager;
for sys
alter user sys identified by oracle123; (in production environment without down the ebs application)
Yes, you can change without restarting the ebs application.
And your syntax seems fine.
Thanks &
Best Regards, -
HT2452 How do I reset the initial password on an iMac running Lion?
New to forums. Not entirely sure how this works. But, when I set up my iMac, I created one ID that is required every time I let the computer go idle or when I shut down the system. Now I want to change that ID. I tried by going into Settings and User/Groups and went through a process that looked like it would reset the password. But, when I reboot my Mac, the system takes me right in--right to the desktop. No ID or password required. Can you change your initial password?
To turn off automatic login you need to go to System Preferences->Users & Groups and select the Login Options located at the bottom of the user list.
In the window that opens is the setting to disable automatic login. -
How to change the default password file's name and path when the database created?
how to change the default password file's name and path when the database created?
nullUsage: orapwd file=<fname> password=<password> entries=<users>
where
file - name of password file (mand),
password - password for SYS and INTERNAL (mand),
entries - maximum number of distinct DBA and OPERs (opt),
There are no spaces around the equal-to (=) character. -
How to change the initial page without open safari
Hi everybody,
I have problems opening my safari because of the plugin silverlight. I defined a tvair.swisscom.ch page as initial and it makes an error open it. it means that my safari doesn't work at all.
i want to know if somebody knows how to change the initial page from safari without open safari and solve this problem.
thx
cheers
nunBack up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.Safari.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test. Optionally, restore the file from a backup that predates the problem.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
HOw do you change the Apple Password ro several Apple devices wit the same user name?
I am trying to change the Apple password for four Apple devices, including an iPhone, iPad, iMac Air, and Desktop MAC. The iPhone password is corrupted so it is interfering with the synching of the four devices on the iCloud. I want to reset the password for all four devices and get them so they will synch with each other as well as the iCloud.
Hi Stew,
App Store requires 10.6.8, is the 10.5.5 you kist correct?
Antway, to change ID...
http://support.apple.com/kb/ht5621 -
How can I change the initial value of the field approve_or_reject?
Hello Workflow Gurus
We are using SRM 5.00(SRM SERVER 550) and as per the requirement, I have to make the Reject radio button as default checked on the Approver's screen.
We are using the SAP Standard Workflow WS14500015.
I found out the Standard task TS14508044 (SC approval per Item)which has one field in its container i.e. approve_or_reject ,based on the Initial value of this field , the radio button is behaving...
approve_or_reject EQ 0 i.e. Approve
approve_or_reject EQ 1 i.e. Reject
Now my requirement is to change the initial value of this field from 0 to 1 so that Reject radio button comes as checked by default into this standard SAP workflow task TS 14508044...
Kindly help me and let me know the procedure to change this.
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE CHANGES INTO STANDARD SAP WORKFLOW ???
Thanks and regards
Ankur Goyal
09823448654Well Iam not much sure about how you are trying to approve the shopping cart workitem b ut last week i faced a similar issue while apporving the workitems I was able to update the contianer element Apporve_or_reject element by using the FM BBP_PDH_WFL_WI_APPROVE and BBP_PDH_WFL_WI_REJECT ... These two fm will take the responsibility of updating the element with respective value as, if you approve the it will be populated with 0 and if you reject the the element will be updated with 1....
Please check the thread where I updated the thread in [SRM Workflows|Problem while approving SC from Blackberry !;
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE
CHANGES INTO STANDARD SAP WORKFLOW ???
Modifying the standard workflow is not recommended..... -
How can I change the initial iCloud account without reinstalling?
i install mountain lion, and set up the icloud with a new @icloud account, however, I have a @gmail account already and used on my iphone4, I want to share information between these devices, so I log out @icloud and log in with @gmail account, contact information is OK, however, when I use the messeage, mac use @icloud to send message, can I change the initial icloud account or should I reinstall?
You can change the Apple ID in the Users & Groups preference pane.
-
Is there a way to change the VNC password thru unix command in ARD2?
In a local network, I get access denied errors from macs that have the vnc password different than the Administrative login user password. I needed to change the Admistrator password which I did thru the Unix command in ARD2.
Now.
Is there a way to change the VNC password thru unix command in ARD2?
Example:
remote computer setup
Panther 10.3.9
vnc password - gopher
user ID - testARD with admin rights
user password - backdoor
ARD2 Computer setup
10.4.10
login ID - testARD
password - backdoor
I get the blue icon but get an 'access denied' error.
I change the password from backdoor to gopher.
I get the red with dash icon but, can get access to the computer.
What is going on? Is ARD2 using the VNC resource instead of ARDs resources?A quick search of Google finds this <http://www.macgeekery.com/tips/cli/settingremote_desktops_vnc_password_interminal>. I have not tested this myself.
bill -
How to change the Portal Password using a link from Web dynpro application
Hello Everybody,
I have a requirement to change the user password from a web dynpro application which is available on a mobile device. Firstly User will log into the portal through a mobile device and after getting authenticated user will be redirected to the mobile application. Within this mobile application there will be a link to change the login password(Portal login). Can somebody tell me how can i change the portal login password from a link available within the mobile application. Looking forward for a suitable reply.
Thanks to all,
Regards,
Saby.Hi Maksim,
Thanks for your reply..but i would also like to know can we directly use the Change Password Iview "persoUserPassword" from the portal. Can i directly Pass the URL of this iview from the portal to a "Change Password" link in the web dynpro application, so that when the user click this link he should be able to see this Iview on his/her mobile device and should be able to change the password from there. But i dont know whether this iview will appear properly on the mobile device or we have to have a custom web dynpro application for this purpose...Please reply with a suitable answer.
Thanks in advance.
Regards,
Sarabjeet Singh. -
How to find out who has changed the SYSADMIN password?
Hi,
Is there a way to trace who has changed the SYSADMIN password in an instance?
Regards,
Neerajof course, this is limited to any updates to the
user, e.g. added responsibility, etc. So, it
probably is very limited in value.That's why it is recommended to enable AuditTrail, which is a way of keeping track of changes made to important data in Oracle Application tables. AuditTrail keeps a history of the following three questions:
1. What changed
2. Who changed it
3. When did the change take place
Maybe you are looking for
-
PHP_MySQL version of a high security user authentication web app.
Since you folks deal with PHP Application Development, I am posting this here. For a demo of the PHP_MySQL version of the UltraSuite High Security User Authentication Web Application, you can sign up at http://bit.ly/hgNjek. It offers a multi-layere
-
I have Creative Suite 5 Design Premium (teacher and student edition), how can i upgrade to cs6 and how much is it. I want to use it forAdobe Creative Suite 6 Design & Web Premium Digital Classroom Book ? I already bought the book thinking it was fo
-
How do I get Elements11 to open G-15 CR-2 files?
bought elements 11 just to get the Camera Raw upgrade to read my new G-15 files. It doesn't work and I can't find a way to edit these canon G-15 CR-2 files Help
-
Until recently, I was able to watch amazon prime, netflix and iplayer on my tv through the I pad with a 5 in one connection kit. Now it says I pad does not support device. can anyone help? should i turn of mirroring? thanks
-
hi i get a 3194 error so i cant upgrade to the 5.0....i have updated itunes and still no good what do i do?