CUA error: No auth iDoc msg type USERCLONE

Hi,
I've set up CUA with SolMan as central system and XI as child.
After creating a user in SolMan i get the status "distribution unconfirmed" for XI in SCUL. The iDoc is green in BD87, however in SM58 i receive the error "No authorization to send IDocs with message type USERCLONE". Nothing changes when I try manual distribution. My error searching basically leads me to http://help.sap.com/saphelp_nw04s/helpdata/en/18/89ef3bc8821d0de10000000a114084/content.htm, however the communication user that is used in the rfc SolMan->XI and XI->SolMan us setup according to those instructions.
Furthermore:
- Username and pass are the same in both systems
- RFC connection tests works in both systems
Another thing that has happened is that when I create new roles in PFCG, they don't show up in the roles list in SU01.
Anyone have any ideas?

Update: Issue resolved. Im using trusted systems with current user from SolMan to XI. I had however forgot to add the sapcuaclient role to my current in XI

Similar Messages

IDocs Msg Types

Hi I am trying to find the applicable IDoc to use for the following processes:
Create A Delivery
Replication of Material Master
Create A Stock Transfer Order
Create a Goods Receipt
Create a Goods Issue
All of these are to be triggered in one SAP system and sent to another SAP system where the applicable document should be created.
Could you give me some pointers on the Basic and Msg Types that could be used.

Hi,
Refer this link:
http://www.erpgenie.com/sapedi/message_types_masterdata.htm
Regards,
Nithiyanandam

Idoc Msg Type COND_A in MM condition transfer

Hi,
Idoc message type COND_A is used to transfer condition records from one client to another using ALE.We can use t-code MEK3 to transfer PB00 condition type .
Can anyone tell me which t-code is used to transfer condition types other than PB00 like FRA1,etc. in MM using message type COND_A?
Thanks,
Kaveri

Hi,
Pricing condition related table is A000 and to sending this data throug ALE process transaction is VK13. Go to transaction VK13 and click on "Condition information" then it will ask you for inputs. Then click on "Execute"...You would get the COND_A IDocs.
Thanks,
Asit Purbey.

Reg. IDoc errors in Mat Mas conversion using ALE/IDocs & reduced msg type

Hi Friends,
Am facing a strange situation while converting the Material Master data from 4.6b to ECC using BD10 transaction with reduced custom message type. I have reduced the standard msg type MATMAS03 using BD53 for the required field mapping both in 4.6b and ECC systems and I written the code using the exit EXIT_SAPLMV01_002 based on client req.
The situation is that in receiving system(ECC) sometimes IDocs are failing and the error shows that some fields which I have not selected in E1MARAM segment of the reduced msg type are populated with some values(ex: zeroes-0, slash-/,spaces)
(Error Msg -Blank spaces in change number 0 / are not supported). And all these coversions are scheduled as Batch jobs and by ALE setup. But when I try to send these errored out material numbers using BD10 tcode(without Batch job), they are posted successfully and the IDoc does not show the additonal fields which I have not selected. I tried to debug the errored parts conversion, but they always post successfully.
FYI, the additonal fields which are populating does not exist in the message type MATMAS03 of the sending system(100 flds) but exists in receiving system ECC(118 flds).
Please help me out..if you have any clue.. and pls let me know if you need more info about this scenario.
Thanks

Hi,
Please check the documentation in WE60 tcode and see if the fields are required to be passed...
Regards,
Nagaraj

IDoc failed with the error massaeg "Instance of object type could not be ch

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
Ajit

Hi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit

Idoc to File scenario - recv. msg type definition

Hello,
Am developing interface for MATMAS msg type. Am new to XI.
Customer has not given the recv. file structure and it is to be defined from Sender idoc type.
Can some body guide me ohw can the recievver msg type defined by looking at the idoc type.
Regards,
Radha

Hi,
You should refer the links given above by one of the friend. Those links give you the step by step directions.
Now particular to using the receiver side Data Type. It dpends upon the receiver side file format that is expected.
1. If you need the similar IDOC structure with XML format on receiver side, then as most of above friends have mentioned, you can use the IDOC structure in mapping on target side. No need to create the Data Type.
2. BUT if you have file format and have to deal with few specific fields only from IDOC structure, then you need to create the Data Type as mentioned in the above given links. ([See page No 8 & 9|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539] )
Create the Data type and follow the steps.
Thanks
Swarup
Edited by: Swarup Sawant on Dec 29, 2008 9:28 AM

IDOC Message Type FIDCCP02 - Error RW029

Hi All,
We are trying to post a FB01 using a IDOC message type - FIDCC2 and struck at error message -
<b>Accounting transaction not permitted for posting in FI/CO
Message no. RW029</b>
When i try to post directly using the exact data in the IDOC, through FB01, there is no problem.
Debug showed that the error is in the following -
Include <b>LRWCLF01</b>
check business process
SELECT SINGLE * FROM t022 INTO ld_t022
WHERE activity = t_acchd-glvor.
IF sy-subrc IS INITIAL.
IF LD_T022-VORGTYP = 0 OR <---------
IF ld_t022-satztyp <> 0.
MESSAGE e029 WITH t_acchd-glvor.
ENDIF.
ELSE.
MESSAGE e029 WITH t_acchd-glvor.
ENDIF.
If this is not the right message type to use, can you suggest any other message type? FB01 we are trying to post is a simple GL posting, no tax, no withholding, etc. IDOC is just a 2 line posting.
Any help/advice is highly appreciated.
Many Thanks,
Shashi

Hi Shashi ,
This table is for Business Process t022 based on activity .
Check your customise settings .
There is no problem with message type .
Please reward if useful

How to hide extra field in IDOC segment E1EDK01 of ORDERS MSG TYPE

HI Gurus,
We are upgrading from 4.6c to ECC6, I am facing with a prolem in my outbound IDOC for ORDERS msg type.
In the header segment E1EDK01 is having extra field HWAER in new version ECC6 and rest of the idoc remains same, can any one help me how to hide or remove the field from the header segment.
Any hint or solution will be appreicated.
Thanks
Tangudu

Hi,
If you want to remove the fields you can use. BD53 where you need to create the new reduced MESSAGE type.
Follow the procedur in attached [LINK|http://wiki.sdn.sap.com/wiki/display/ABAP/ReducedMessageTypes]
As per your question i understood. you have field HWAER in 4.6c nad 6. But the field is not sent to reciver in 4.6c.
So In another way you dont want to send this field in this case you can write a code in cusom exit to balnk this field out in ECC 6.
Hope it helps,
Shanmugavel Chandrasekaran

Relation between msg type & Idoc type

i have a X msg type which is already assigned to Y idoc type.
can I assign the same X msg type to a new Z Idoc type.
If yes, what is the effect on the old assignment?
note: Y & Z have no relation at all. both of then are two different Idoc types.

Hi,
it is a problem, If u assign a X message type to more than 1 message type, becuase message type is only identifier in the ALE or EDI configurations. Using this identifier u have to configure in the ALE or EDI.
This is one-to-one relation between Message type and Idoc type.
Reward me if it is ok.
Regards,
Subbarao

0 idocs generated for msg type cosmas

Hi everyone..
please help out with this idoc issue
I'm trying to send data with msg type COSMAS from 800 to 810 using BD16 as follows:
it just says 0 idocs generated.
I have again gone back and checked my customizations but can't figure it out.
the steps i have done are:
create and assign logical systems
open rfc connections from both c800 and c810
create model view and assign msg type in bd64 in c800.
create partner profiles in both c800 and c810.
open port from c800 .. .DO i have to open a port from c810 as well??
Some doubts I have :
do i have to do :
"Generate the partner profiles by selecting the navigation path from the main menu, Environment --> Generate Partner profiles"
from BD64 after i create the model view and add msg type COSMAS.
regards,
allwyn

HI
no, i have not done anything relating to bd64 in c810 ..that wasn't mentioned in the notes I am following .. Do I have to repeat the same steps like I did in c800?

MSG TYPE for oppurtunity in CRM for IDOC

Kindly help.
suggest any badi as welll. do we use same msg type as for bp???

Hi Abhinav,
I have gone through your query. If i am correct, i guess you are needing the Idoc with which the Opportunity data can be replicated. If that is the case make use of CRMXIF_ORDER_SAVE_* Idoc which is to transfer the Business transaction data.
In this you can make use of segment E101CRMXIF_OPPORTUNITY_X for sending the opportunity data. If you are not looking for this sort of an information kindly elaborate your query bit more.
I hope this helps.
Regards,
Venkat

Error in IDOCs (Multiple Types) Collection in BPM

Hi
I am following this scenario
IDOCs (Multiple Types) Collection in BPM
But in BPM i am getting the following error (Pls check this link)
http://www.flickr.com/photos/33169400@N05/3095091883/
where should I have to check for the errors
thanks
mainan
Edited by: manian on Dec 9, 2008 10:45 AM

The source message should be a single line container variable and the target should be a multiline container variable.
VJ

Std Msg Type and Idoc Type to send multiple characteristics for equipment

Hello Experts,
I have the requirement to send all the assigned characteristics linked to an Equipment or linked to a Material, along with the all possible values BUT require only standard Message Type and Idoc Basic Type.
I found Message Type = CHRMAS and Idoc Type = CHRMAS04, BUT it contain information of ONLY one characteristic, not solve my objective (multiple characteristics in one Idoc)
Will you please provide me any standard Message Type and Idoc Basic Type that solve my above requirement?
Thanks in advance,
akg

Hello Experts,
Can you at least tell me, is there anything standrad that can fulfill my above requirement?
If not then I will proceed with custom developments; and in this case is there any complexity to transmit the custom Idoc?
Thanks in advance,
Thanks & Regards
akg

Error while Reading Idocs from ECC 6.0 to Sun IDM .

Hi Gurus,
We have a scenerio where we have to update the Sun IDM Server with all the changes in HR Data happening in ECC.
For that... we have
1. Created a Logical System for Sun IDM server, Port, RFC Connection (TCP/IP).
2. Assigned Partner Profiles, Distribution Model etc. for msg. type HRMD_A ;
3. We have created a Communications User used by the IDM server to connect to ECC.
Idocs are created daily and are in status 03 - Data passed to Port OK !
and on the In Sun Identity manager 8.0 we have created SAP resource adapter for ECC 6.0,
after giving resource parameters our test connection is successful.
We also changed edit synchronisation policy for the same but when we start synchronisation in IDM, it is unable to read any idocs although Idocs are generated in SAP .
Log file gives the message as "Incoming IDoc list request containing 0 documents"
We also have one more error ;
some times while doing a connection test : JCO.Server could not find server function 'åäåä¹'
while most of the times the connection is successful.
Please suggest .

Hi Gurus,
The error got resolved .
The changes in the settings i did :
SAP SIDE : Made the RFC Connection Unicode.
IDM SIDE : Checked on the "SAP Server Unicode" checkbox; while doing the HR Activ Synch Settings.
This Resolved the error.
regards
Vaibhav

Error when posting IDoc *** in system ERP100

Hi Experts!
Can you pls help me with a goods receipt issue?
When user tries to make a good receipt on a PO, we have the msg "Error when posting IDoc *** in system ERP100" in SRM front-end application monitor.
The same msg is getting displayed in RZ20.
On the idoc itself in tcode WE02 however, I can't see any problem and unfortunately I have no access to the same t-code in R/3. Anyway, I don't see the GR on the PO.
What can be the reason for this problem please?
What is in general the way to analyse and solve this kind of issue?
Thanks a lot !!
imre

Hi,
First find out the PO number from the idoc in tx WE02 in SRM system. Then in ERP , transaction BD87 , specify the details like message type and the system information .... and find out the PO that was errored out for GR. From this we can find the cause of the error. First try to rectify the error and then run the report to clear the contents of BBP_DOCUMENT_TAB.
Hope this helps.
Regards,
Kalyan

CUA error: No auth iDoc msg type USERCLONE

Similar Messages

Maybe you are looking for