CUA error
Hi,
We have configured CUA. The configuration looks good and all are green. When we create a new user, you can see the user in the child system. But problem is with roles, and profiles. The roles, and profiles which we have assigned on the CUA to the user is not getting populated to the child system. I don't see any errors in the SCUL.
Anybody help?
Thanks,
Kris
FYI...
There is an error log in the SCUL.
USER S 0000000000037655 User CUASEC has changed
PROFILE E 0000000000037656 You are not authorized to assign profiles
PROFILE E 0000000000037656 You are not authorized to assign profiles
ACTGRP E 0000000000037657 You are not authorized to assign roles
ACTGRP E 0000000000037657 You are not authorized to assign roles
Similar Messages
-
CUA error: No auth iDoc msg type USERCLONE
Hi,
I've set up CUA with SolMan as central system and XI as child.
After creating a user in SolMan i get the status "distribution unconfirmed" for XI in SCUL. The iDoc is green in BD87, however in SM58 i receive the error "No authorization to send IDocs with message type USERCLONE". Nothing changes when I try manual distribution. My error searching basically leads me to http://help.sap.com/saphelp_nw04s/helpdata/en/18/89ef3bc8821d0de10000000a114084/content.htm, however the communication user that is used in the rfc SolMan->XI and XI->SolMan us setup according to those instructions.
Furthermore:
- Username and pass are the same in both systems
- RFC connection tests works in both systems
Another thing that has happened is that when I create new roles in PFCG, they don't show up in the roles list in SU01.
Anyone have any ideas?Update: Issue resolved. Im using trusted systems with current user from SolMan to XI. I had however forgot to add the sapcuaclient role to my current in XI
-
I am having another issue with the installation of CUA. In the central system, in the admin ID, when I assign a system to that ID I am getting the following error.
*EDI: Error process code 'EDIO' is not available*
I click on the question mark and it tells me this:
Diagnosis
A syntax error was identified while processing an inbound IDoc. There is
no entry with the key EDIO in 'Error process codes'. However, this
process code was determined from the table of status values (TEDS1).
Procedure
Please check the 'Error process codes'.
Execute function
God Bless you if you have the answer.Hi,
Go to transaction WE46 and check the code "EDIO" entry is maintained or not.
If not then enter with type 2, identification = TS00007989, and description as "Outbound, error handling with IDoc". Chech this as active.
Regards,
Chetan. -
Error in job for connection to CUA System
I have a problem with the two jobs in the u2018AS ABAP - Initial loadu2019 for a CUA system. According to the log is seems to be a memory issue!!!!
Extract from the logfile:
u2026u2026u2026
26.03.2009 09:57:31 :I:Initializing custom pass FromSAP: ReadABAPRoles
26.03.2009 09:57:31 :I:Initializing MX SAP BAPI object
26.03.2009 09:57:31 :W:Filter not supported when Listing CUA Roles. Ignoring :*
26.03.2009 09:57:35 :E:Unhandled Error in DSERuntime
java.lang.OutOfMemoryError: Java heap space (failed to allocate 84038672 bytes)
u2026u2026u2026
This error is related to the both the jobs: ReadABAPRoles and ReadABAPProfiles.
Please note:
Setting the %$rep.CUA_MASTER% equal u2018falseu2019 using the repository constant works for the both jobs (only the roles and/or profile in u2018localu2019 system the is read meaning no data from the subsystems in the CUA is read )
Any suggestions for handling this problem??
Best Regards
Tom SvarreThe text you enter in the dispatcher script after JAVAOPTIONS= is passed on as one parameter to the java executable. When you set JAVAOPTIONS=-Xmx256M -Xmx256M the effect is like the commandline java "-Xmx256M -Xms256M" java interprets this as an illegal heap size and refuses to start.
If you want to specify more than one javaoption, you also have to set MXDISPATCHER_EXECSTRING=1
This option causes the dispatcher to pass the arguments to the java executable as one string instead of split into separate parameters.
The reason this option is not turned on by default, is that this can cause problems with paths and parameters containing special characters that causes the command line interpreter to fail.
In your case, only specifyng the -Xmx is probably the best solution. Specifying -Xms will cause heavier load on the system also for jobs thatdoes not need a large heap. -
CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes
Cluster with 2 hosts 2012 R2
Scheduled CAU fails with:
CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
Error Code:-2146233088 Stack: at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
If I run CAU "Analyze Readiness" ALL comes as PASS
If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
Anybody any ideas?
Thanks
SebHi,
In some case if you disabled the connection in Windows firewall inbound of
"Cluster aware updating" service it will can’t use the CAU.
More information:
Starting with Cluster-Aware Updating: Self-Updating
http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
What is Cluster Aware Updating in Windows Server 2012? (Part 1)
http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
Cluster-Aware Updating Overview
http://technet.microsoft.com/en-us/library/hh831694.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
I wanted to implement a test of CUA with my DEV systems (DEV R3, DEV BW, and DEV SRM). When i've created the model distribution in my central system (DEV R3 client 030), and saved the model, i had the following error in my child system (DEV SRM) : "ERROR when starting the text comparison". I didn't have any error in the other systems (DEV R3 and DEV BW).
I've checked my RFC connections, I don't know how to sove this problem.
Thanks in advance for your aswers...
Regards,
MohamedOK, I've solved the problem by myself.
In fact, I didn't have an RFC user connection between my child system DEV SRM and my central system DEV R3. I had just RFC users connection between my central system and my child systems...
Mohamed -
CUA: SCUG - Transfer Users errors with Output Device does not exist
Greetings,
I'm currently setting up CUA on our ECC 6.0 boxes and ran into an issue when I run SCUG and try to transfer the users. We're in the process of upgrading to ECC. The target systems are upgraded copies of our current 4.7 target systems.
Currently we have CUA connecting to our DEV,TEST, PreProd, and Prod Systems.
The output devices only reside on the target systems. There are no output devices on our production CUA box.
I'm trying to setup the ECC CUA box and modeling all the settings to our current environment. Once I set the CUA setting, including the RFC's and ALE connections I ran scug and ran into the issue.
I only get the error where the Default Output Device is populated. Users with no Default Output transferred without any issues. I looked up notes in OSS and can't seem to find any on this subject.
Side note: If I remove the output device it transfers without error. Obviously this is not a solutions, I was merely testing out the scenario.
Any help would be greatly appreciatedHi Alex,
there is just a little comment in SAP note #399917 (point 4).
As from my knowledge, the SCUM settings are not considered during SCUG. So setting
'output device' to local will not be a solution.
The standard way is to transport the ouput device information to your CUA-master system before taking over the users. (create transport in SPAD).
I have also another workaround for you gurus, but this will need to modify the standard coding for the time of taking over your users. Using this modification, only a warning message will appear and unknown printers will not be taken into CUA-master system.
Pls test this proposal carefully (coding is rather old....), this is just a suggestion !
Include LSUUCF01
FORM DEFAULTS_CHECK
Spool: Ausgabegerät
IF NOT DEFAULTSX-SPLD IS INITIAL AND
NOT USER_DEFAULTS-SPLD IS INITIAL.
SELECT SINGLE * FROM TSP03 WHERE PADEST = USER_DEFAULTS-SPLD.
IF SY-SUBRC <> 0.
PAR1 = USER_DEFAULTS-SPLD.
CALL FUNCTION 'BALW_BAPIRETURN_GET2'
EXPORTING
TYPE = 'W' "'E' "Warning instead of error
CL = '01'
NUMBER = 29
PAR1 = PAR1
IMPORTING
RETURN = ERRORTABLE
EXCEPTIONS
OTHERS = 1.
APPEND ERRORTABLE.
ENDIF.
ENDIF.
I strongly recommend to undo this modification after you have finished SCUG.
Good luck, b.rgds, Bernhard -
Hi Gurus,
I have successfully linked 5 child system to the CUA.. All the changes are also flowing to the child system but we when i see the CUA log all the changes appear as unconfirmed except for the parent system.. ...
I have check teh RFC connection, CUA landscap ... All seems to be working fine
Can anyone tell the solutions....
ParveenHi Parveen,
your problem can have various causes....
The most common is, that the user in your rfc-destinations from the child system to the cua-central has not sufficient authorizations. Pls check sm58 on the child systems.
Temporarily try, if you have a change of behaviour, if you assign sap_all to that user.
You could also run ST01 for that user to find out, if authoriaztions are missing.
Another common failure is caused by wrong definition of rfc-destinations. Change the rfc-user to 'dialog' and perform a login with that rfc-connection. Are you logged on the the central system then?
Pls check idoc status in the child systems (bd87). Are they really processed without errors?
b.rgds and good luck,
Bernhard -
CUA Assignment error in ES Workplace
Hello,
I just got my password reset for ES Workplace but get the following error when I try a SAPGUI logon
"You cannot log on (CUA system assignment missing)".
Did anybody encouter this and do you know a solution? Also, what is the email id to write to for such probelms, the initial mail doesnt have any email id.
Thanks and Regards,
Parag.Thanks Anton, the email id did work, it wasnt a fake mailbox.
Nevertheless the correct id is [email protected]
Here's the text from the mail I got:
For questions and support requests about the ES Workplace systems please use email address SAP Support ES Workplace ([email protected]). To contact SAP Support ES Workplace we kindly ask you to write in English language. In case of problems with the ES Workplace please provide always a comprehensive description in together with suitable screen-shots and explanation how to recreate the error situation. Please use "high" priority flag (available in many email programs) when urgent action is needed. We kindly ask you not to misuse priority flag.
For other requests, e.g. problems with Enterprise Services please create SAP Support ticket with component "CA-SOA-SWP".
Regards,
Parag. -
Parallel Processing: Error message 00-250: "No CUA area available"
Dear colleagues,
I have implemented a parallel processing with asynchronous RFC for a large data analysis in CO-PC. I think I was able to implement everything properly as described in the sap help: http://help.sap.com/saphelp_nw04/helpdata/en/22/0425c6488911d189490000e829fbbd/content.htm
But now I face one problem: My jobs are often cancelled with the error message 250 of class 00 "No CUA area available".
I don't have a clue what this error message means. I couldn't find any help in the SDN, OSS or in the internet. Has anybody an idea how to handle this problem?
Thx very much for your help!
MariusIn your program while you doing the CALL FUNCTION - STARTING NEW TASK, did you check how many work processors are available.
Suppose you have 40K data in your internal table, and in one step you are passing 4 K data. Then 10 work processes are required. But in your group setting if you have define 9, then last one will fail. So before any 'submit job in new task' or any 'CALL FUNCTION - STARTING NEW TASK' statement if have to check if any work processes are available. if available then submit otherwise wait.
Thanks
Subhankar -
Hi all,
I have just installed a test environment of CUAE. After installing all the prerequisites everything seemed to be working and apache successfully started.
After installing the svcplatform, cuas and cume Apache will no longer start.
I am getting the following error:
Processing config directory: c:/program files/cisco systems/unified application
environment/system/apache/conf/
Processing config file: c:/program files/cisco systems/unified application envi
ronment/system/apache/conf/grxml_expires.conf
Processing config file: c:/program files/cisco systems/unified application envi
ronment/system/apache/conf/mce.conf
PHP Warning: PHP Startup: Unable to load dynamic library 'C:\Program Files\PHP\
ext\php_ldap.dll' - The operating system cannot run %1.
in Unknown on line 0
Processing config file: c:/program files/cisco systems/unified application envi
ronment/system/apache/conf/media.conf
Processing config file: c:/program files/cisco systems/unified application envi
ronment/system/apache/conf/metreos_http.conf
Syntax error on line 7 of c:/program files/cisco systems/unified application env
ironment/system/apache/conf/metreos_http.conf:
Cannot load c:/program files/apache group/apache/modules/mod_unique_id.so into s
erver: (126) The specified module could not be found:
I can't figure any of this out on my own any help greatly appreciated.
Thanks,
JamieOk I have resolved the first part of my error by replacing ssleay32.dll and libeay32.dll both in c:\program files\php and in system32.
My 2nd issue still remains however.
Apache is looking for mod_unique_id.so and I do not believe this is present in 1.3.
This is the second time I have tried this complete install and both times I have come up against this.
Surely someone else must have come up against this, I have done 2 seperate installs on 2 completely different systems.
Again any help greatly appreciated. -
Error while generating earlywatch report.
Hi Guru's
I am having problem in generating earlywatch report.
In solution manager i find these errors:-
The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
Typical sources of errors are:
The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
Session number: 1000000002286
In source system tcode sdccn when i try to run Refresh sessions i get following error:-
31.05.2010 12:24:34 > Task rescheduled for 20100531125533 ( attempt 0001 ) /BDL/SAPLBDL11 0
31.05.2010 12:24:34 Refresh of session overview failed from destination SM_SMPCLNT100_BACK /BDL/SAPLBDL11 0
31.05.2010 12:24:34 > Sessions cannot be refreshed from destination SM_SMPCLNT100_BACK ( SMP , 0020275310 ) /BDL/SAPLBDL11 0
31.05.2010 12:24:34 > You cannot log on (CUA system assignment missing) /BDL/SAPLBDL11 0
31.05.2010 12:24:34 > error reading function module interface DSWP_API_SESSIONLIST_GET from SM_SMPCLNT100_BACK /BDL/SAPLBDL11 0
31.05.2010 12:23:58 Refresh of session overview started from destination SM_SMPCLNT100_BACK /BDL/SAPLBDL11 0
I have checked with the rfc's they are working fine.
Please help.
Regards
AkifHi Akif,
Could you please try deleting the RFC Connection and entering it again in the Managed system.
1) SDCCN
2) Goto-> Settings-> Task specific.
3) RFC Destinations-> Settings click on change mode.
4) Delete the RFC and then add the RFC Connection again and mark as Master and active.
Then check it, hope it solves the issue.
Thanks,
Raghavendra. -
ST22 short dump with error DFIF_REPO_SQL_ERROR
HI, All
SAP ERP 2004s on windows 2003x64 with SQLserver database.
Here is ST22 and dev_w0
20.03.2014 Dynamic List Display 1
Runtime Error
|Date |Time |Host |User |Client|Keep|Name of runtime error|Exception|Appl. component|Report|No. Sess|
|20.03.2014|08:48:44|clusterx64|SAPSYS|000 |C |DBIF_REPO_SQL_ERROR | | | |1 |
|20.03.2014|08:18:44|clusterx64|SAPSYS|000 |C |DBIF_REPO_SQL_ERROR | | | |1 |
D:\usr\sap\PRD\DVEBMGS00\work\dev_w0
trc file: "dev_w0", trc level: 1, release: "640"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, M
B
B Mon Mar 17 13:26:13 2014
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' ...
B Library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.405)
B New connection 0 created
M sysno 00
M sid PRD
M systemid 562 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 414
M intno 20020600
M make: multithreaded, Unicode, 64 bit
M pid 4544
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4544) [dpxxdisp.c 1227]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 58560 (1464)
M DpShMCreate: sizeof(tm_adm) 38387184 (19184)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 1248000 (624)
M DpShMCreate: sizeof(vmc_adm) 0 (512)
M DpShMCreate: sizeof(wall_adm) (400056/346328/64/192)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000B9B0050, size: 40479544)
M DpShMCreate: allocated sys_adm at 000000000B9B0050
M DpShMCreate: allocated wp_adm at 000000000B9B1C30
M DpShMCreate: allocated tm_adm_list at 000000000B9C00F0
M DpShMCreate: allocated tm_adm at 000000000B9C0118
M DpShMCreate: allocated wp_ca_adm at 000000000DE5BF08
M DpShMCreate: allocated appc_ca_adm at 000000000DE61CC8
M DpShMCreate: allocated comm_adm_list at 000000000DE63C08
M DpShMCreate: allocated comm_adm at 000000000DE63C20
M DpShMCreate: allocated vmc_adm_list at 000000000DF94720
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000DF94748
M DpShMCreate: allocated wall_adm at 000000000DF947B8
M DpRqQInit: Parameter rdisp/queue_lock_level = 2
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M tskhstart: taskhandler started
M tskh_init: initializing DIA work process W0
M tskh_init: rdisp/cleanup_after_crash = 1
M
M Mon Mar 17 13:26:15 2014
M calling db_connect ...
C Thread ID:3128
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C CopyLocalParameters: dbuser is 'prd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Mon Mar 17 13:26:16 2014
C Provider Release:9.00.4035.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Mon Mar 17 13:26:22 2014
C Cache sizes: header 104 bytes, 20000 names (32960000 bytes), 1000 dynamic statements (5752000 bytes), total 38712104 bytes
C Using shared procedure name cache SAPPRDX64_PRDPRD_PRD_MEM initialized by another process.
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: prd
C pn_id:SAPPRDX64_PRDPRD_PRD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
M db_connect o.k.
M ICT: exclude compression: *.zip,*.cs,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.js,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png
I
I Mon Mar 17 13:26:26 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000016320050, size: 41613000)
M SHM_ROLL_AREA (addr: 000007FFC4050050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000018AD0050, size: 134217728)
M SHM_ROLL_ADM (addr: 0000000020AE0050, size: 2678942)
M SHM_PAGING_ADM (addr: 0000000020D70050, size: 787488)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0000000020E40050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateNoBuffer: correct_btc_behaviour = 1
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0000000020ED0050
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0000000020F700D8, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0000000020F70320, size: 6240232)
B dbntab: Buffer FTAB(item array) (addr: 0000000021563B08, size: 24960000)
B dbntab: Buffer FTAB(data area) (addr: 0000000022D31708, size: 128000000)
B dbntab: Buffer IREC(hash header) (addr: 000000002A7500D8, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 000000002A750320, size: 6240232)
B dbntab: Buffer IREC(item array) (addr: 000000002AD43B08, size: 6240000)
B dbntab: Buffer IREC(data area) (addr: 000000002B337208, size: 13312000)
B dbntab: Buffer STAB(hash header) (addr: 000000002BFF00D8, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 000000002BFF0320, size: 6240232)
B dbntab: Buffer STAB(item array) (addr: 000000002C5E3B08, size: 6240000)
B dbntab: Buffer STAB(data area) (addr: 000000002CBD7208, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 00000000350400D8, size: 4744)
B dbntab: Buffer TTAB(anchor array) (addr: 0000000035041360, size: 6240232)
B dbntab: Buffer TTAB(item array) (addr: 0000000035634B48, size: 15600000)
B dbntab: Buffer TTAB(data area) (addr: 00000000365154C8, size: 113880000)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 40, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 000000002CEEEA58)
B dbtbxbuf: Buffer TABL (addr: 000000003D1C0150, size: 263640000, end: 000000004CD2D510)
B dbtbxbuf: Buffer TABLP (addr: 000000002E780150, size: 61440000, end: 0000000032218150)
B dbexpbuf: Buffer EIBUF (addr: 000000004CD30158, size: 122880000, end: 0000000054260158)
B dbexpbuf: Buffer ESM (addr: 0000000032230158, size: 4194304, end: 0000000032630158)
B dbexpbuf: Buffer CUA (addr: 0000000054270158, size: 30720000, end: 0000000055FBC158)
B dbexpbuf: Buffer OTR (addr: 0000000032640158, size: 4194304, end: 0000000032A40158)
B dbcalbuf: Buffer CALE (addr: 0000000032A50050, size: 500000, end: 0000000032ACA170)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M rdisp/hold_keeps_time_slice -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
G RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 99, pEnforce = 1 )
G RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000010E29190
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 3 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 00000000331C00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 00000000331C0C58
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 50852kb, dir_size: 25348kb.
A Attached to PXA (address 000007FFD4080050, size 720000K, 2 fragments of 334576K )
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ABAP ShmAdm attached (addr=000007FF26F71000 leng=20955136 end=000007FF2836D000)
A >> Shm MMADM area (addr=000007FF2741D070 leng=246976 end=000007FF27459530)
A >> Shm MMDAT area (addr=000007FF2745A000 leng=15806464 end=000007FF2836D000)
A RFC Destination> destination clusterx64_PRD_00 host clusterx64 system PRD systnr 0 (clusterx64_PRD_00)
A RFC Options> H=clusterx64,S=00,d=2
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC abap/SIGCHILD_default not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 83148 bytes at 0000000033330050
Y dyWpInit
Y ztta/dynpro_ara 800000
Y ztta/cua_ara 360000
Y ztta/diag_ara 250000
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\PRD\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\PRD\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:640.00]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0,
B join_conforms_iso = 1
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 640, [6400.0.414.20020600]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [29]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume clusterx64_PRD_00
E Profile-Parameter: enque/sync_dequeall = 0
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
S
S Mon Mar 17 13:26:31 2014
S server @>SSRV:clusterx64_PRD_00@< appears or changes (state 1)
S server @>SSRV:clusterx64_PRD_00@< appears or changes (state 1)
B
B Mon Mar 17 13:26:34 2014
B table logging switched off for all clients
N
N Mon Mar 17 13:26:44 2014
N login/password_change_for_SSO : 1 -> 1
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 0000000005990050
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 00000000059907B8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 00000000059907F0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 00000000059907FC
M SecAudit(check_daily_file): audit file opened D:\usr\sap\PRD\DVEBMGS00\log\20140317000001.AUD
D
D Mon Mar 17 13:26:51 2014
D GuiStatus: table test
D GuiStatus set generate inline >20140317132651<
D GuiStatus clear generate inline >20140317132651<
B
B Mon Mar 17 13:27:00 2014
B dbmyclu : info : my major identification is 3232240218, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is C8157D392BFA064AAC992593949203BE.
B dbmyclu : info : current optimistic cluster level: 3
B dbmyclu : info : pessimistic reads set to 2.
G
G Mon Mar 17 13:27:03 2014
G GetWritePermissionForShm( pLocation = 283, pEnforce = 0 )
G
G Mon Mar 17 13:27:04 2014
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
M ThEMsgArrived: sysmsg_for_rfc = 0
G
G Mon Mar 17 13:27:18 2014
G GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
A
A Mon Mar 17 13:31:19 2014
A ***ATRA: session closed by other process
D
D Mon Mar 17 13:35:06 2014
D GuiStatus generation SAPLSUU5 is not running
Y go to separate LUW generation ===> 20140317133506
Y GuiStatus generate texts: SAPLSUU5 M
Y return from separate LUW <=== WP: 1 th_rc=0 OK
G
G Mon Mar 17 13:35:16 2014
G GetWritePermissionForShm( pLocation = 281, pEnforce = 0 )
G RelWritePermissionForShm( pLocation = 277, pEnforce = 0 )
M
M Mon Mar 17 13:40:02 2014
M ThIUsrDel: th_rollback_usrdelentry = 1
A
A Mon Mar 17 13:44:07 2014
A ***ATRA: session closed by other process
B
B Mon Mar 17 13:46:35 2014
B create_con (con_name=++DBO++0020)
B New connection 1 created
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 1 opened (DBSL handle 1)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000001 ACTIVE NO NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
S
S Mon Mar 17 13:51:33 2014
S found spool memory service RSPO-ACTIONS at 00000000331C9090
D
D Mon Mar 17 14:05:56 2014
D GuiStatus generation RSSTAT26 is not running
Y go to separate LUW generation ===> 20140317140556
Y GuiStatus generate: RSSTAT26 SELECT
Y
Y Mon Mar 17 14:05:57 2014
Y return from separate LUW <=== WP: 2 th_rc=0 OK
Y go to separate LUW generation ===> 20140317140557
Y GuiStatus generate texts: RSSTAT26 E
Y return from separate LUW <=== WP: 1 th_rc=0 OK
D
D Mon Mar 17 14:06:11 2014
D GuiStatus generation RSSTAT50 is not running
Y go to separate LUW generation ===> 20140317140611
Y GuiStatus generate: RSSTAT50 0010
Y
Y Mon Mar 17 14:06:12 2014
Y return from separate LUW <=== WP: 1 th_rc=0 OK
Y go to separate LUW generation ===> 20140317140612
Y GuiStatus generate texts: RSSTAT50 E
Y return from separate LUW <=== WP: 1 th_rc=0 OK
Y
Y Mon Mar 17 14:07:10 2014
Y
Y ===> running separate LUW generation: 20140317140710
Y ===> requesting WP: 1
Y GuiStatus generate: SAPMSRD0 MAIN_NEW
D GuiStatus generate status prog >SAPMSRD0< status >MAIN_NEW< >20140317140710<
D GuiStatus set generate inline >20140317140710<
D GuiStatus clear generate inline >20140317140710<
Y
Y ===> running separate LUW generation: 20140317140710
Y ===> requesting WP: 1
Y GuiStatus generate texts: SAPMSRD0 E
D GuiStatus generate texts prog >SAPMSRD0< >20140317140710<
D GuiStatus set generate inline >20140317140710<
D GuiStatus clear generate inline >20140317140710<
Y
Y Mon Mar 17 14:23:12 2014
Y
Y ===> running separate LUW generation: 20140317142312
Y ===> requesting WP: 1
Y GuiStatus generate: RSMSSDBPAHI 0100
D GuiStatus generate status prog >RSMSSDBPAHI< status >0100< >20140317142312<
D GuiStatus set generate inline >20140317142312<
D GuiStatus clear generate inline >20140317142312<
B
B Mon Mar 17 14:31:34 2014
B create_con (con_name=++DBO++0020)
B New connection 2 created
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE YES NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000016 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000017 ACTIVE NO NO NO NO NO 004 255 255 20140317 143134 SAPPRDX64
B
B Mon Mar 17 14:51:33 2014
B Disconnected from connection con_da={++DBO++0020,17,2}
B
B Mon Mar 17 15:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000030 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000031 ACTIVE NO NO NO NO NO 004 255 255 20140317 153136 SAPPRDX64
B
B Mon Mar 17 15:51:33 2014
B Disconnected from connection con_da={++DBO++0020,31,2}
B
B Mon Mar 17 16:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C
C Mon Mar 17 16:31:37 2014
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000044 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000045 ACTIVE NO NO NO NO NO 004 255 255 20140317 163136 SAPPRDX64
B
B Mon Mar 17 16:51:33 2014
B Disconnected from connection con_da={++DBO++0020,45,2}
B
B Mon Mar 17 17:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000058 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000059 ACTIVE NO NO NO NO NO 004 255 255 20140317 173136 SAPPRDX64
B
B Mon Mar 17 17:51:33 2014
B Disconnected from connection con_da={++DBO++0020,59,2}
B
B Mon Mar 17 18:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000072 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000073 ACTIVE NO NO NO NO NO 004 255 255 20140317 183136 SAPPRDX64
B
B Mon Mar 17 18:51:33 2014
B Disconnected from connection con_da={++DBO++0020,73,2}
B
B Mon Mar 17 19:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000086 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000087 ACTIVE NO NO NO NO NO 004 255 255 20140317 193136 SAPPRDX64
B
B Mon Mar 17 19:51:33 2014
B Disconnected from connection con_da={++DBO++0020,87,2}
B
B Mon Mar 17 20:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000100 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000101 ACTIVE NO NO NO NO NO 004 255 255 20140317 203136 SAPPRDX64
B
B Mon Mar 17 20:51:33 2014
B Disconnected from connection con_da={++DBO++0020,101,2}
B
B Mon Mar 17 21:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000116 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000117 ACTIVE NO NO NO NO NO 004 255 255 20140317 213136 SAPPRDX64
B
B Mon Mar 17 21:51:33 2014
B Disconnected from connection con_da={++DBO++0020,117,2}
B
B Mon Mar 17 22:31:37 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000130 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000131 ACTIVE NO NO NO NO NO 004 255 255 20140317 223137 SAPPRDX64
B
B Mon Mar 17 22:51:33 2014
B Disconnected from connection con_da={++DBO++0020,131,2}
B
B Mon Mar 17 23:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000144 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000145 ACTIVE NO NO NO NO NO 004 255 255 20140317 233136 SAPPRDX64
B
B Mon Mar 17 23:51:33 2014
B Disconnected from connection con_da={++DBO++0020,145,2}
M
M Tue Mar 18 00:01:33 2014
M SecAudit(check_daily_file): audit file closed D:\usr\sap\PRD\DVEBMGS00\log\20140317000001.AUD
M SecAudit(check_daily_file): audit file opened D:\usr\sap\PRD\DVEBMGS00\log\20140318000001.AUD
B
B Tue Mar 18 00:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000158 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000159 ACTIVE NO NO NO NO NO 004 255 255 20140318 003136 SAPPRDX64
B
B Tue Mar 18 00:51:33 2014
B Disconnected from connection con_da={++DBO++0020,159,2}
B
B Tue Mar 18 01:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000172 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000173 ACTIVE NO NO NO NO NO 004 255 255 20140318 013136 SAPPRDX64
B
B Tue Mar 18 01:51:33 2014
B Disconnected from connection con_da={++DBO++0020,173,2}
B
B Tue Mar 18 02:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000186 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000187 ACTIVE NO NO NO NO NO 004 255 255 20140318 023136 SAPPRDX64
B
B Tue Mar 18 02:51:33 2014
B Disconnected from connection con_da={++DBO++0020,187,2}
B
B Tue Mar 18 03:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000200 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000201 ACTIVE NO NO NO NO NO 004 255 255 20140318 033136 SAPPRDX64
B
B Tue Mar 18 03:51:33 2014
B Disconnected from connection con_da={++DBO++0020,201,2}
B
B Tue Mar 18 04:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000214 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000215 ACTIVE NO NO NO NO NO 004 255 255 20140318 043136 SAPPRDX64
B
B Tue Mar 18 04:51:33 2014
B Disconnected from connection con_da={++DBO++0020,215,2}
B
B Tue Mar 18 05:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000230 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000231 ACTIVE NO NO NO NO NO 004 255 255 20140318 053136 SAPPRDX64
B
B Tue Mar 18 05:51:33 2014
B Disconnected from connection con_da={++DBO++0020,231,2}
B
B Tue Mar 18 06:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000244 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000245 ACTIVE NO NO NO NO NO 004 255 255 20140318 063136 SAPPRDX64
B
B Tue Mar 18 06:51:33 2014
B Disconnected from connection con_da={++DBO++0020,245,2}
B
B Tue Mar 18 07:31:36 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000258 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000259 ACTIVE NO NO NO NO NO 004 255 255 20140318 073136 SAPPRDX64
B
B Tue Mar 18 07:51:33 2014
B Disconnected from connection con_da={++DBO++0020,259,2}
B
B Tue Mar 18 08:31:41 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140317 132615 SAPPRDX64
B 000 001 ++DBO++0020 000000272 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000273 ACTIVE NO NO NO NO NO 004 255 255 20140318 083141 SAPPRDX64
B
B Tue Mar 18 08:51:33 2014
B Disconnected from connection con_da={++DBO++0020,273,2}
C RpcExec: line 12553. hr: 0x80004005 Communication link failure
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), Communication link failure
C Procname: [Y3R40000001F9FG0332RSEUMODut01i1o211ns]
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [Y3R40000001F9FG0332RSEUMODut01i1o211ns]
C RpcExec failed. HR 80004005 DBSL retcode 99. proc: [Y3R40000001F9FG0332RSEUMODut01i1o211ns]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:1128862
C DbSlRead - Error 99 (dbcode 10054) on open
C DbSlRead - <Y3R40000001F9FG0332RSEUMODut01i1o211ns>
C DbSlRead - Error 99 (dbcode 10054) on fetch
C DbSlRead - <Y3R40000001F9FG0332RSEUMODut01i1o211ns>
C SET_EC p->msgno 10054 p->severity 0
C dbca_p->errclass set to DBSL_EC_RESTART
B ***LOG BYM=> severe DB error 10054 ; work process in reconnect status [dbsh#4 @ 1127] [dbsh 1127 ]
B ***LOG BY4=> sql error 10054 performing SEL on table RSEUMOD [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
B ***LOG BY0=> [10054] TCP Provider: An existing connection was forcibly closed by the remote host.
[10054] Communication link failure [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
B *** ERROR => missing return code handler
abdebug#?[17989] does not handle return code 1 from dbcrtab#6[1596]
==> calling sap_dext to abort transaction
[dbeh.c 84]
C RpcExec: line 12553. hr: 0x80004005 Communication link failure
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), Communication link failure
C Procname: [Y3R40000001F1CN2138T100ut01i3o4ns]
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [Y3R40000001F1CN2138T100ut01i3o4ns]
C RpcExec failed. HR 80004005 DBSL retcode 99. proc: [Y3R40000001F1CN2138T100ut01i3o4ns]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:1112522
C DbSlRead - Error 99 (dbcode 10054) on open
C DbSlRead - <Y3R40000001F1CN2138T100ut01i3o4ns>
C DbSlRead - Error 99 (dbcode 10054) on fetch
C DbSlRead - <Y3R40000001F1CN2138T100ut01i3o4ns>
C SET_EC p->msgno 10054 p->severity 0
C dbca_p->errclass set to DBSL_EC_RESTART
B ***LOG BYM=> severe DB error 10054 ; work process in reconnect status [dbsh#4 @ 1127] [dbsh 1127 ]
B ***LOG BY4=> sql error 10054 performing SEL on table T100 [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
B ***LOG BY0=> [10054] TCP Provider: An existing connection was forcibly closed by the remote host.
[10054] Communication link failure [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
C RpcExec: line 12553. hr: 0x80004005 Communication link failure
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), Communication link failure
C Procname: [Y3R40000001F1CN2138T100ut01i3o4ns]
C sloledb.cpp [RpcExec,line 12553]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [Y3R40000001F1CN2138T100ut01i3o4ns]
C RpcExec failed. HR 80004005 DBSL retcode 99. proc: [Y3R40000001F1CN2138T100ut01i3o4ns]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:1112522
C DbSlRead - Error 99 (dbcode 10054) on open
C DbSlRead - <Y3R40000001F1CN2138T100ut01i3o4ns>
C DbSlRead - Error 99 (dbcode 10054) on fetch
C DbSlRead - <Y3R40000001F1CN2138T100ut01i3o4ns>
C SET_EC p->msgno 10054 p->severity 0
C dbca_p->errclass set to DBSL_EC_RESTART
B ***LOG BYM=> severe DB error 10054 ; work process in reconnect status [dbsh#4 @ 1127] [dbsh 1127 ]
B ***LOG BY4=> sql error 10054 performing SEL on table T100 [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
B ***LOG BY0=> [10054] TCP Provider: An existing connection was forcibly closed by the remote host.
[10054] Communication link failure [dbtrtab#5 @ 3988] [dbtrtab 3988 ]
C TestConnection: line 7344. hr: 0x80004005 Unable to open a logical session
C sloledb.cpp [TestConnection,line 7344]: Error/Message: (err 10054, sev 0), Unable to open a logical session
C Procname: [TestConnection - no proc]
C sloledb.cpp [TestConnection,line 7344]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [TestConnection - no proc]
C Rollback: TestConnection(0) failed with dbcode 10054
C TestConnection: line 7344. hr: 0x80004005 Unable to open a logical session
C sloledb.cpp [TestConnection,line 7344]: Error/Message: (err 10054, sev 0), Unable to open a logical session
C Procname: [TestConnection - no proc]
C sloledb.cpp [TestConnection,line 7344]: Error/Message: (err 10054, sev 0), TCP Provider: An existing connection was forcibly closed by the remote host.
C Procname: [TestConnection - no proc]
C Rollback: TestConnection(1) failed with dbcode 10054
C SET_EC p->msgno 10054 p->severity 0
C dbca_p->errclass set to DBSL_EC_RESTART
B ***LOG BYM=> severe DB error 10054 ; work process in reconnect status [dbsh#4 @ 1127] [dbsh 1127 ]
B Reconnect state is entered by connection:
B 000: name = R/3, con_id = 000000000, state = ACTIVE , tx = NO , hc = NO , perm = YES,
B reco = YES, frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
B hdl_error_on_commit_rollback: DB-ROLLBACK detected RECONNECT state
M ThShortCommit: db unusable
B RECONNECT: rsdb/reco_trials: 3
B RECONNECT: rsdb/reco_sleep_time: 5
B RECONNECT: rsdb/reco_sync_all_server: OFF
B db_con_reconnect: reconnecting to connection 0:
B 000: name = R/3, con_id = 000000000, state = INACTIVE , tx = NO , hc = NO , perm = YES,
B reco = YES, frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
B disconnecting from connection 0 ...
B disconnected from connection 0
B opening connection 0 ...
C Thread ID:3128
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\PRD\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C CopyLocalParameters: dbuser is 'prd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.4035.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 104 bytes, 20000 names (32960000 bytes), 1000 dynamic statements (5752000 bytes), total 38712104 bytes
C Using shared procedure name cache SAPPRDX64_PRDPRD_PRD_MEM initialized by another process.
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: prd
C pn_id:SAPPRDX64_PRDPRD_PRD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140318 085133 SAPPRDX64
B 000 001 ++DBO++0020 000000279 INACTIVE NO NO NO NO NO 003 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000273 DISCONNECTED NO NO NO NO NO 000 255 255 20140318 085133 SAPPRDX64
B successfully reconnected to connection 0
B ***LOG BYY=> work process left reconnect status [dblink#6 @ 732] [dblink 0732 ]
B
B Tue Mar 18 09:31:35 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C
C Tue Mar 18 09:31:36 2014
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140318 085133 SAPPRDX64
B 000 001 ++DBO++0020 000000286 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000287 ACTIVE NO NO NO NO NO 004 255 255 20140318 093135 SAPPRDX64
B
B Tue Mar 18 09:51:33 2014
B Disconnected from connection con_da={++DBO++0020,287,2}
B
B Tue Mar 18 10:31:35 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NO NO 000 255 255 20140318 085133 SAPPRDX64
B 000 001 ++DBO++0020 000000300 ACTIVE YES NO NO NO NO 004 255 255 20140317 134635 SAPPRDX64
B 000 002 ++DBO++0020 000000301 ACTIVE NO NO NO NO NO 004 255 255 20140318 103135 SAPPRDX64
B
B Tue Mar 18 10:51:33 2014
B Disconnected from connection con_da={++DBO++0020,301,2}
B
B Tue Mar 18 11:31:35 2014
B Connect to ++DBO++0020 as with MSSQL_SERVER=SAPPRDX64 MSSQL_DBNAME=PRD OBJECT_SOURCE=prd
C Thread ID:3128
C dbmssslib.dll patch info
C patchlevel 0
C patchno 405
C patchcomment Poor performance with isolation level read committed (1721164)
C Network connection used from SAPPRD2X64 to SAPPRDX64 using tcp:SAPPRDX64
C Connected to db server : [SAPPRDX64] server_used : [tcp:SAPPRDX64], dbname: PRD, dbuser: dbo
C pn_id:SAPPRDX64_PRD_PRD
B Connection 2 opened (DBSL handle 2)
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO NO YES NOHi All,
We need to activate 0SR_DEFCUR currency object. I have activated the object and transported. Issue is resolved.
Thanks to all for your kind replied.
Regards,
Don -
When i start my Dispatcher i am getting the following error and it is in Yellow colour. Pls help me in this
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid BW7
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 5144
Mon Apr 23 13:25:45 2007
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5144) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >blrkecesbibw_BW7_01 <
DpShMCreate: sizeof(wp_adm) 22528 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 07080040, size: 4657592)
DpShMCreate: allocated sys_adm at 07080040
DpShMCreate: allocated wp_adm at 07081E40
DpShMCreate: allocated tm_adm_list at 07087640
DpShMCreate: allocated tm_adm at 07087670
DpShMCreate: allocated wp_ca_adm at 07456910
DpShMCreate: allocated appc_ca_adm at 0745C6D0
DpShMCreate: allocated comm_adm at 0745E610
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 074DF4D0
DpShMCreate: allocated gw_adm at 074DF510
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 074DF540
DpShMCreate: allocated wall_adm at 074DF548
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 8188
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1629
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( blrkecesbibw) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >blrkecesbibw_BW7_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Mon Apr 23 13:25:48 2007
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Mon Apr 23 13:26:25 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:26:45 2007
J2EE server info
start = TRUE
state = STARTED
pid = 3764
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1713
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:27:05 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:27:25 2007
J2EE server info
start = TRUE
state = STARTED
pid = 5504
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1719
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:27:45 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:28:05 2007
J2EE server info
start = TRUE
state = STARTED
pid = 6008
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1730
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:28:25 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:28:45 2007
J2EE server info
start = TRUE
state = STARTED
pid = 1900
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1735
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:29:05 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:29:25 2007
J2EE server info
start = TRUE
state = STARTED
pid = 7468
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1741
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:29:45 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:30:05 2007
J2EE server info
start = TRUE
state = STARTED
pid = 8000
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1750
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:30:25 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:30:45 2007
J2EE server info
start = TRUE
state = STARTED
pid = 7668
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1757
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:31:05 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:31:25 2007
J2EE server info
start = TRUE
state = STARTED
pid = 3868
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1764
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:31:45 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Mon Apr 23 13:32:05 2007
J2EE server info
start = TRUE
state = STARTED
pid = 6640
argv[0] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BW7\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1773
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BW7
argv[7] = -DSAPMYNAME=blrkecesbibw_BW7_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BW7\SYS\profile\BW7_DVEBMGS01_blrkecesbibw
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Mon Apr 23 13:32:25 2007
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWNthe following is teh Dev_wo trace file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Apr 23 13:51:31 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\BW7\DVEBMGS01\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\BW7\DVEBMGS01\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\BW7\DVEBMGS01\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 01
M sid BW7
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3012
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3012) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Apr 23 13:51:32 2007
M DpShMCreate: sizeof(wp_adm) 22528 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07880040, size: 4657592)
M DpShMCreate: allocated sys_adm at 07880040
M DpShMCreate: allocated wp_adm at 07881E40
M DpShMCreate: allocated tm_adm_list at 07887640
M DpShMCreate: allocated tm_adm at 07887670
M DpShMCreate: allocated wp_ca_adm at 07C56910
M DpShMCreate: allocated appc_ca_adm at 07C5C6D0
M DpShMCreate: allocated comm_adm at 07C5E610
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 07CDF4D0
M DpShMCreate: allocated gw_adm at 07CDF510
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 07CDF540
M DpShMCreate: allocated wall_adm at 07CDF548
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host blrkecesbibw
M
M Mon Apr 23 13:51:33 2007
M calling db_connect ...
C Thread ID:5412
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\BW7\DVEBMGS01\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on BLRKECESBIBW
C CopyLocalParameters: dbuser is 'bw7'
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C Provider Release:08.10.1830
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 500 dynamic statements (2844000 bytes), total 34364068 bytes
C Using shared procedure name cache BLRKECESBIBW_BW7BW7_BW7_MEM initialized by another process.
C Connected to db server : [BLRKECESBIBW] server_used : [np:(local)], dbname: BW7, dbuser: bw7
C pn_id:BLRKECESBIBW_BW7BW7_BW7
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070423 135133 BLRKECESBIBW
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Mon Apr 23 13:51:35 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0CD00040, size: 4400000)
M SHM_ROLL_AREA (addr: A2110040, size: 143360000)
M SHM_PAGING_AREA (addr: 103F0040, size: 65536000)
M SHM_ROLL_ADM (addr: 0D140040, size: 1432040)
M SHM_PAGING_ADM (addr: 0D2A0040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0D330040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0D3C0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 16, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 154200C8, size: 30000000, end: 170BC448)
B dbtbxbuf: Buffer TABLP (addr: 170C00C8, size: 10240000, end: 17A840C8)
B dbexpbuf: Buffer EIBUF (addr: 17A900D0, size: 4194304, end: 17E900D0)
B dbexpbuf: Buffer ESM (addr: 17EA00D0, size: 4194304, end: 182A00D0)
B dbexpbuf: Buffer CUA (addr: 0FC200D0, size: 3072000, end: 0FF0E0D0)
B dbexpbuf: Buffer OTR (addr: 182B00D0, size: 4194304, end: 186B00D0)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 05C427B0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1C7200A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1C7204F0
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 21 MB, reducing # of fragments
A System page size: 4kb, total admin_size: 11740kb, dir_size: 11676kb.
A Attached to PXA (address AA9E0040, size 350000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=5731C000 leng=20955136 end=58718000)
A >> Shm MMADM area (addr=57791EB8 leng=126176 end=577B0B98)
A >> Shm MMDAT area (addr=577B1000 leng=16150528 end=58718000)
A RFC Destination> destination blrkecesbibw_BW7_01 host blrkecesbibw system BW7 systnr 1 (blrkecesbibw_BW7_01)
A RFC Options> H=blrkecesbibw,S=01,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 16892 bytes at 0FF90040
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\BW7\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\BW7\DVEBMGS01\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.75.20050900]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [10]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
S
S Mon Apr 23 13:51:36 2007
S server @>SSRV:blrkecesbibw_BW7_01@< appears or changes (state 1)
C The IRow interface is supported by this OLEDB provider
M
M Mon Apr 23 13:51:37 2007
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 06060040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 060607A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 060607E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 060607EC
B
B Mon Apr 23 13:51:51 2007
B table logging switched off for all clients
S
S Mon Apr 23 13:56:51 2007
S found spool memory service RSPO-ACTIONS at 1C729BB8 -
Sap-nw:3300 not reached error in gateway
Dear experts,
I am facing a strange problem after a successful installation of netweaver Java+abap.
when i start the server i found this error
**** ERROR file opened at 20100131 114242 Arab Standard T, SAP-REL 700,0,113 RFC-VER 3 911150 MT-SL
T:2844 Error in program 'igsmux': ======> CPIC-CALL: 'SAP_CMNOREGTP'
LOCATION CPIC (TCP/IP) on local host
ERROR partner 'sap-nw:3300' not reached
TIME Sun Jan 31 11:42:42 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2770
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 1
i ignore the error and i tried to login
after successful login to the portal server when i access the user administration tab. the explorer show
SAP WebAS Engine is starting...
If this state does not change within a few minutes,
please contact your system administrator.
Check the recommendations in SAP Notes: 943498, 764417
Message: Dispatcher running but no server connected!
and the server turns to yellow again when it turns to green again
i checked dev_rd
Sun Jan 31 13:11:15 2010
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 9 / sock 268
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1205) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 6 / sock 304
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1148) [nixxi.cpp 4424]
***LOG S23=> GwIDisconnectClient, client disconnected (006) [gwxxrd.c 11592]
***LOG S74=> GwIDisconnectClient, client disconnected ( sap-nw) [gwxxrd.c 11603]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c 11638]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c 11651]
* LOCATION SAP-Gateway on host sap-nw / sapgw00
* ERROR connection to partner 'sap-nw:1148' broken
* TIME Sun Jan 31 13:11:15 2010
* RELEASE 700
* COMPONENT NI (network interface)
* VERSION 38
* RC -6
* MODULE nixxi.cpp
* LINE 4424
* DETAIL NiIRead
* SYSTEM CALL recv
* ERRNO 10054
* ERRNO TEXT WSAECONNRESET: Connection reset by peer
* COUNTER 232
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 10 / sock 256
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1206) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 11 / sock 244
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1208) [nixxi.cpp 4424]
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
*** ERROR => NiIRead: SiRecv failed for hdl 12 / sock 232
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1207) [nixxi.cpp 4424]
then i try to login again with the browser it give me
Portal Runtime Error
An exception occurred while processing your request
Exception id: 01:27_31/01/10_6192950
See the details for the exception ID in the log file.
any help would be appreciated
<br>
i also wanted to add that telnet 3300 works fine ping to host name is ok
my os win2003 sap 2004s sr3
Edited by: ebrahime on Jan 31, 2010 11:37 AMthanks for your reply. i wanted to add 2 thing after the installation the password i entered in installation was not working for all the super users that is why i had to delete SAP* from database and change the j2ee_Admin password.
you mentioned that the java stack is unable to communicate with abap stack but i can login to portal by j2ee_admin user. but when i go to identity management then it give the error i gave you earlier.
any way the dev_w0 file contents is bellow
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Feb 02 10:23:01 2010
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' ...
B Library 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' loaded
B Version of 'F:\usr\sap\ENP\DVEBMGS00\exe\dbdb6slib.dll' is "700.08", patchlevel (0.144)
C DbSl trace SM50: switch request to level 1
B New connection 0 created
M sysno 00
M sid ENP
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 1604
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1604) [dpxxdisp.c 1305]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 25168 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E70050, size: 6348592)
M DpShMCreate: allocated sys_adm at 0000000010E70050
M DpShMCreate: allocated wp_adm at 0000000010E72150
M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
M DpShMCreate: allocated tm_adm at 0000000010E78400
M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
M DpShMCreate: allocated comm_adm at 00000000113E3FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
M DpShMCreate: allocated gw_adm at 000000001146ACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001146ACE0
M DpShMCreate: allocated wall_adm at 000000001146ACF0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Feb 02 10:23:02 2010
M ThInit: running on host ENP
M
M Tue Feb 02 10:23:03 2010
M calling db_connect ...
C Registering callback for dynamic profile parameters
C DB2 library successfully loaded DB2 library 'F:\usr\sap\ENP\DVEBMGS00\exe/db6_clidriver\bin\db2app64.dll' successfully loaded
C
C DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
C
C DB6 shared library (dbdb6slib) patchlevels
C (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
C (0.8) Support of SDBUPDEXCL (note 847616)
C (0.9) DB6: use export file for dbdb6slib (note 835135)
C (0.9) DB6: Core in getAndBindSQLDA (note 833183)
C (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
C (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
C (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
C (0.17) DB6: special characters in sidadm passwd (note 865839)
C (0.21) DB6: no SAP_INFO comments (note 873889)
C (0.22) DB6: hints: get correlation names from view texts (note 868888)
C (0.23) DB6: hints: get correlation names from view texts (note 868888)
C (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
C (0.27) DB6: activate value compression (note 886231)
C (0.28) DB6: optimization guidelines on views part 2 (note 868888)
C (0.30) DB6: no SQL trace for SQLCancel (note 892111)
C (0.33) DB6: append SAP_TA comment (note 873889)
C (0.34) DB6: activate value compression with quoted names (note 886231)
C (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
C (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
C (0.50) DB6: reread passwords for secondary connections (note 931742)
C (0.52) DB6: double quote table names in optguidelines (note 868888)
C (0.54) DB6: error handling in DBSL CLP (note 940260)
C (0.69) DB6: technical support of DB2 CLI driver (note 962892)
C (0.73) DB6: log table name on TRUNCATE failure (note 970743)
C (0.79) DB6: column type XML in index size calculation (note 982993)
C (0.82) DB6: CAST for SSTRING data types (note 989568)
C (0.86) DB6: long runtimes for R3szchk (note 1000847)
C (0.88) DB6: patch collection Dec 06 (note 1005574)
C (0.96) DB6: patch collection Jan 07 (note 1017852)
C (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
C (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
C (0.107) DB6: patch collection Apr 07 (note 1047194)
C (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
C (0.113) DB6: work process type in application snapshot (note 1059905)
C (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
C (0.117) DB6: patch for execution of long DDL statements (note 1069658)
C (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
C (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
C (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
C (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
C (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
C (0.128) DB6: db6_free on invalid memory area (note 1092030)
C (0.133) DB6: statement cache enhancements (note 1101031)
C (0.136) DB6: change for enhancement pack installer (note 1111536)
C (0.138) DB6: improoved table size estimate for DB8 V8 (note 1119934)
C (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
C (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
C
C Supported features:
C
C ..retrieving configuration parameters
C ..done
C Running with UTF-8 Unicode
C
C Tue Feb 02 10:23:04 2010
C Running with CLI driver
C DB2 client driver version '09.01.0007'
C Connected to DB2 server type 'DB2/NT64'
C Connected to DB2 version '09.01.0007'
C Connect to 'ENP' as 'SAPENP' schema 'SAPENP' o.k.; con_hdl=0
C Database code page is ok.
C Database collating sequence is ok.
C DB2_WORKLOAD=SAP is set in DB2 registry as required.
C CLI Insert Buffering is disabled on single partition databases.
C DbSl trace SM50: switch request to level 1
C DbSlControl: returning SAPDBHOST='ENP'
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100202 102303 ENP
C DbSlControl: returning SAPDBHOST='ENP'
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Feb 02 10:23:05 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000015400050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFDDA80050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000015840050, size: 134217728)
M SHM_ROLL_ADM (addr: 000000001D850050, size: 2678942)
M SHM_PAGING_ADM (addr: 000000001DAE0050, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 000000001DB70050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 000000000AE50050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 17, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000021540160, size: 30000000, end: 00000000231DC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000231E0160, size: 10240000, end: 0000000023BA4160)
B dbexpbuf: Buffer EIBUF (addr: 0000000023BC0170, size: 4194304, end: 0000000023FC0170)
B dbexpbuf: Buffer ESM (addr: 0000000023FD0170, size: 4194304, end: 00000000243D0170)
B dbexpbuf: Buffer CUA (addr: 00000000243E0170, size: 3072000, end: 00000000246CE170)
B dbexpbuf: Buffer OTR (addr: 00000000246D0170, size: 4194304, end: 0000000024AD0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000128BEA10
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002DDF00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002DDF0610
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
A Attached to PXA (address 000007FFEDAB0050, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF35ED5000 leng=20955136 end=000007FF372D1000)
A >> Shm MMADM area (addr=000007FF363AEF10 leng=244096 end=000007FF363EA890)
A >> Shm MMDAT area (addr=000007FF363EB000 leng=15622144 end=000007FF372D1000)
A RFC Destination> destination ENP_ENP_00 host ENP system ENP systnr 0 (ENP_ENP_00)
A RFC Options> H=ENP,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 35354 bytes at 000000002DF60050
N SsfSapSecin: putenv(SECUDIR=F:\usr\sap\ENP\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is F:\usr\sap\ENP\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [DB6:700.08]):
B max_blocking_factor = 30, max_in_blocking_factor = 60,
B min_blocking_factor = 1, min_in_blocking_factor = 1,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.144.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [16]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume ENP_ENP_00
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Tue Feb 02 10:23:06 2010
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 000000000A960050
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 000000000A9607C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 000000000A960800
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 000000000A96080C
M
M Tue Feb 02 10:23:28 2010
M rdisp/rb_cleaned_rfc = 0
A
A Tue Feb 02 10:23:34 2010
A RFC FRFC> fallback on the central gateway ENP sapgw00 activ
Maybe you are looking for
-
My iPod nano (newest version) screen lights up but does not work how can I fix this?
Need help please!! I have an iPod nano, the newest version, it turns on, noticeable by a light that appears however it doesn't show the icons etc that the tactility of the iPod nano offers. Does anyone know how to fix this? Any help would be greatly
-
Can't get ePrint to work on 3050a
Hi, I just bought a 3050a, mainly because of the ePrint capability. I have spent all day trying to get it working and it will be going back to the store unless it starts working. I am using Windows XP and I have succeeded in installing the printer a
-
Not allowing to update RG23A part 1
Hi All, I have done a GR with capturing the excise. but after this i captured the excise with J1IEX, reference to GR, but when i am going to update the excise register with T-code: J1i5 with reference to GR (material document), system showing the mes
-
Place a Tab Canvas within a Tab Canvas
Oracle Forms 6i. I have a requirement to put a tab canvas within a tab canvas. However when I try to create a tab canvas within a tab canvas i get a 'FRM-13002: Stacked and Tab canvases must be created within content canvases.' Does anyone know of a
-
How do I segment the import from a camera
In FCP7 (I am getting nostalgic) I could set I/O markers during the process of importing video material from a camera. That way I could discard bad footage during the import process. FCPX does not seem to have that option, unless I missed it. When I