CUA has lot of problems !! Please help

Hello all,
We have 10 systems(multiple clients in few systems) configured in CUA. Sometimes the roles dont get replicated, sometimes the IDOCs are not passed from parent to child,
I added a new system to the Parent CUA and when I was assigning roles to a user for that child system thru CUA, the CUA surprisingly deleted all the other roles the user had in other system. The new system access was not touched
*Question 1: I have 3 jobs running PFCG_TIME_DEPENDENCY, RBDAPP01 and SUSR_ZBV_GET_RECEIVER_PROFILES in all the child systems. I know PFCG is a needed job for user comparison. Do I need the other jobs ?*
I have RBDAPP01 to process IDOCs and SUSR for the user comparison of roles.
Since there are a lot of issues in our current CUA environment( our CUA is on Solution Manager 4.0), I am thinking of deleting the current CUA and configuring it again. Its very difficult to do trouble shooting going in SCUL logs and pin point what really happened.
In RSDELCUA there are 3 options. Can I select " Delete CUA" and will it delete the CUA landscape or I would still need to go in WE20 and delete the partner profiles and do other steps?
What I am looking for is a way where I can configure CUA from scratch by deleting the current CUA
( It sits on Sol Man 4.0). I am thinking if I configure if properly, it will function smoothly
Any comments?

Hi,
"In RSDELCUA there are 3 options. Can I select " Delete CUA" and will it delete the CUA landscape or I would still need to go in WE20 and delete the partner profiles and do other steps?"
For deactivating the Child system you need to run RSDELCUA from se38. We can delete the Child system from SCUA but that is not recomended. It creates a problem related to the Partner Profiles and related Ports for which the Icons in respective Child may not be active. For this we need to run WE20.
The job PFCG* should be scheduled to run at a particular time. As for the other 2 jobs you mentioned I dont see any harm in running those but in most cases PFCG* is sufficient. (Ans to Ques 1).
Any reason that you want to recreate the CUA? It may be the case that SCUM is not configured properly for the new system that you have added. Instead of starting from scratch I beleive its best you check with the new system where the other roles are getting deleted.
Please let me know if any issue.
Regards
Aveek.

Similar Messages

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

P6N Lots of problems please help

P6N Lots of problems please help
The setup is the following:
P4 D935 3.2gHz
P6N Diamond MS-7320 Bios 1.3V
Corsair XMS2-6400C4DHX
NX8600GT-TD512EZ/D2
Seagate Barracuda 7200 250Gb SataII 16Mb
Akasa 460W Dual Rail
Please help I have lots and lots of problems with lockups that can happen any time post , bios , loading vista and sometimes during OS. Some times will work ok play games etc. Already tried different combinations fitting the mem modules even tried and some pc4200 modules same problems. Spent lots of hours clocking the mems with different settings but non is stable. I am not interested in overcloking just to make it stable to start with. When is actually running is fine is more than enough for me. Already looked to lots of posts on the msi forum but… Since the cpu is old can I go back on an older bios version???? The Corsair modules have to run at 2.1V or is it possible to use them with slower setting. So confused so lost ….. please HELLPPPPP
Any help greatly appreciated.

please, don't buy any more unneded parts. first find the problem then buy if no solutions available.
One thing I find with BIOS issues is to do a full clear.
1. disconnect the power cord from the power supply(turn switch to off if there is one.
2. hit the power switch to clear the power out of the system.
3. set the cmos jumper to clear and leave there if one is available.
4. Pull the battery.
5. carefully short out the battery connector on the motherboard to drain any power left.
6. press the clear cmos button and hold for 30sec minimum, if you didn't have a jumper to set.
7. replace battery, move jumper back, plug in power cord, turn on power sipply switch.
Now it should hopefully power up. go into BIOS and load optimized results. hit save and exit and when it gets back to the post screen, go back into bios and set your normal MB settings(ie. set boot devices, boot order, disable sound if using sound card, etc...)
go into your H/W Monitor section and list the CPU Vcore settings to make sure it is getting the power it needs. I just looked it up and it's suppose to run from 1.225v - 1.325v.
also, try your most generic ram you have with auto settings. the faster the ram usually the more volts they need and default volts are 1.8v for ram and sometimes faster chips have issues with lower volts.
Let me know how this works for you.
-=Mark=-
ps. make sure everything is unplugged from the computer you don't need. just cpu, 1 stick of ram, and video. and of course keyboad and mouse. Please make a signature with all your systems specs including make and model numbers. I hate guessing at solutions and I'd hate to see you buy any more unneccessary parts because of lack of information.

My ipod touch 3g has a large problem please help

Hello I have a 3g Ipod Touch, the other night when i turned it on it had a message that said "activation required" I plugged it into my computer and It had me restore it. Ive tried restoring it multiple times and syncing it multiple times. Even after multiple restores it still says activation required. I cannot unlock it. Turn it off or even put it in recovery mode. I am very scared because its the most expensive thing I own and there is absolutely no way that I can afford another one. I do not know what to do. Please help me everybody

InsaneTomato wrote:
Im out of warrenty, How much would that cost?
Not sure...
See Here Apple Contact USA http://www.apple.com/contact/
Contacting Apple World Wide for Support and Service http://support.apple.com/kb/HE57

Touch pad has a weird problem, please help!!!

I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Sounds like you need to restart the TouchPad. You can do this by holding the power button + the center button together for 20 seconds (yes, it takes a LONG time). This is a hardware initiated reset and won't require any screen taps.

Lots of problems.please help

Sunday,i updated my software on my powerbook.I had not used it lastnight.when i re started it i ran into many problems.mail did not recognize me.asked me to set up as if i was a new user.once i did this i realized i lost all my saved email and junk folder.when i logged onto itunes same thing happened.reconized me as new user and lost all my music on itunes.i had to re do this everal timed and still get a error message about damaged files trying to repair,new damaged file 3.alo lost my firefox setting and on the dock.some other setting are also missing but not iphot0(all pictures are still there)called apple the had me run disc repair which showed no repairs needed.has anyone experianced this or have any suggestions.thanks

Ty...i did try first aid.......
it said i had 2 volumes o fils hat wre bad......they each had a long number but bo way to ID.
It said that IT COULD NOT FIX
Now it is crashing-freezing left & right.
Next to bringing it in for service i am gonna copy HD to my FW ext drive and do a clean install.
DOES THAT SOUND RIGHT ?
still no anser on why it would auto-creat a new USER.
any suggestions
if i copy ALL to 2nd drive and re-install....could the problem be now in 2nd drive and come back ?
thanx

A LOT OF PROBLEMS PLEASE HELP!!!!!

WELL I HAVE A 30 G CLASSIC BUT IT WONT SYNC IT TELLS ME "I TUNES CANT READ IPOD CONTENTS', DIAGNOSTICS TELLS ME "IEEE 1394 HOST CONTROLLER NOT FOUND"
what does all of this mean i have restored this ipod more times than i can count i need help

No IEEE 1394 Host Controller found.
When running iPod diagnostics from iTunes, that message merely indicates that your iPod has no firewire controller. Since the iPod 5th gen has none it's not surprising you see it, and it will always be displayed even if your iPod were working correctly. Ignore it, it's not relevant.
You don't appear to have gone through any of these articles.
Windows XP cannot detect an iPod.
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
Your Windows PC doesn't recognize iPod
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Windows confuses iPod with network drive
And also, the info contained in this post.

My iPod touch fifth generation has a strange problem please help!

When I squeeze or pinch the sides or the corners of my iPod touch it makes a ticking/clicking noise is it normal?

I do not know. If concerend,
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

My iphone 5 32 gb has an camera autofocus problem, please help me solve this

my iphone 5 32 gb has an camera autofocus problem, please help me solve this

Hi teejayfs,
Thanks for visiting Apple Support Communities.
If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
Jeremy

ITunes 10.2.1.1 doesn't recognize my iPhone 4 when I try to sync it. This has happened suddenly. Please help.

iTunes 10.2.1.1 doesn't recognize my iPhone 4 when I try to sync it. This has happened suddenly. Please help.

I recently installed IOS 4.3.2. and ITunes 10.2.2 on my 64 Bit Vista PC. Since upgrading the IOS on any of my devices, none of them are recognized in iTunes. The computer recognizes them in My Computer but not in iTunes. Apple support pointed me to http://http://support.apple.com/kb/TS1538?viewlocale=en_US which directs you to uninstall/reinstall iTunes and all related programs. That has not solved the problem. The only guidance I have been given is from a tech at the Apple store who mentioned that there might be issues with the drivers in Vista. I have not been able to find any help with solving that issue. Does anybody have any thoughts.

My iphone 5 is no longer charging with new apple cord and lint has been cleared. Please help.

My iphone 5 is no longer charging with a new apple cord and lint has been cleared. Please help. It just started happening this week and I have tried everything. Is this a software / driver problem? We all know the battery doesn't last a full day if you "use" your phone like a normal person. I am very frustrated! My daughters iphone 5 started doing this a few days later than mine as well.

Not much help I'm afraid but I use my iPhone 5 like a 'normal' person and it's battery almost all day. Perhaps there's a hardware fault somewhere? Have you tried the usual reset and restore?

IPhone activation lock problem please help

My friend has bougth an iPhone 5 with iOS 7 through OLX . OLX is a website like craiglist where people buy there products directly to sellers.
iPhone 5 when he bougth was good and was in working condition. He bougth it yesterday.But suddenly in the nigth he got a maessage that "message from iPhone owner that your iPhone is lost " and the iPhone has been stuck in the activation lock and is asking for the apple id of the consumer and the owner of th phone from whome he has bougth has stopped responding.
Please help him to get out of this problem .I have bougth ut by paying full price is there any way apple will help me in this issue or is there any way i can activate my iPhone.
Please help. Thnak you.

I also bought a used iPhone5 from the market here in Pakistan. The original user hasnt removed the device from his/her iCloud. I had to restore my phone because of some problem and now im stuck at the activation lock. I dont know the iCloud ID of the original user(that could be helpful in order to contact the user) and obviously I dont know the password aswell. So now my $855 worth device is useless. Ive been waiting for three months for some solution but all in vain. APPLE!!! PLEASE help me out here.

I am unable to register my debit card after creating my apple ID. Whenever i click enter after filling all the debit card details, it shows that, "your payement method has been declined". Please help me people, why is it so.?

I am unable to register my debit card after creating my apple ID. Whenever i click "continue" after filling all the debit card details, it shows that, "Your payement method has been declined". Please help me people, why is it so.? Also, i would ike to tell that my bank is, Union Bank Of India and it facilitates the auto conversion, rupee to dollar.. I think there is a different problem. Please help me guys.!!

The card must be issued in the same country as the store you are trying to use. If you're trying to sign up for the US Apple Store, it must be a US card with a US billing address. If you're trying to sign up in India, it must be an Indian card with an Indian billing address.
Apple will run a small charge, which will be credited back, to make sure the card is valid. If it is a debit card and you do not have enough in the account to cover the authorization, it will be declined.
It is possible the currency conversion you mentioned may be causing a problem. Contact the issuing bank if you are sure you have enough in the account and you are signing up for the correct store.

My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??

My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??

i plugged it and pressed the home button for a few seconds. the connect to itunes screen appeared and the moment i disconnect the cable from the electric plug, it switches off. when i connect the cable to the PC, nothing happens, its as if nothing has been done.

CUA has lot of problems !! Please help

Similar Messages

Maybe you are looking for