CUA: Model view not created automatically in Child System

Hi, I try to create a CUA with just a child system thru txn SCUA. The result of generation is good and all green. The part that is not right is I do not see the model view created in txn BD64 of child system, I can see it created in master system. Both RFC of master and child system are working fine. I do not see errors at WE20 & WE21 as well. Under this situation, I can see CUA active in master system but not child system. Hence, CUA is not working as it says in master system.
I have setup CUA couple of times before but this is the first time that I encounter such a weird situation. Does anyone has any clue where could have gone wrong?
Edited by: Annie Chan on Jul 25, 2008 5:23 PM

Hi Everyone,
It is indeed a RFC issue but it was a silly mistake with the incorrect hostname that I am suppose to connect to. Hence, the Distribution Model doesn't exist in the child system. Nervertheless, your advise does point to the right direction.
Thanks so much for your input. Points are granted as accordingly.
Regards,
Annie

Similar Messages

New role in CUA user record not getting pushed to child system

I added a new child system to our CUA setup. I've confirmed that the RFC connections from both sides are working properly (test connection succeeds) and I've successfully completed the user transfer function in SCUG. All exisitng roles assigned to the users in the child system are now appearing in the CUA central system as expected. I added a new role to a user via SU01 in the central system to this child system, but when I go to the child system, it does not appear in the user's SU01 record. Any ideas why this would not be syncing properly?
Thanks,
Michael

Hi,
Whenever you create a new role in child system, it has to be sync up with the central system.
To sync up with the central system, login to central system goto su01>enter any user name>go to roles tab- click on Text comparision from chiled system. Its navigate to another screen, there you have to mention the child system and click on execute. it syncs up with child sytem. Hope it will help you out to resolve the issue.
If still you are getting the same issue login to the central system.. goto SE38-- enter the program name as "RSCCUSND" and click on execute there mention the user name and the logical system id of the Child system name, select the parameters which you wanted to distribute to child system and execute it.
Best Regards
Mani

Excise Invoice Not creating automatically

Hello!
while doing Billing document using VLO1N,Excise invoice is not creating for a particular material. I checked Material Master for this particular item.I compared the Material Master for the item which is creating Excise Invoice automatically and the for the item Excise Invoice not creating automatically. Every thing is same for both the items but the excise invoice is creating automatically for one material and same Excise invoice is not creating automatically for another item.I don't know where is the exact problem is.could anyone tell me why the Excise Invoice is not creating for the particular item.
-M.Suba

Excise Invoice creation depends on Customizatoin of Excise group which is specific to Plant.
Check Customization settings-
IMG: Logistics General - Tax on Goods movements - INDIA - Basic Settings - Maintain Excise Group,
select your excise group & choose details,
You will observe, check box " Excise Invoice during Billing" in 'Outgoing Excise Invoice' section. This check box should be marked.
Note: To create Billing documents - Tx :VF01 is used , not VL01N ( this is for Creating Outbound Delivery document)
Regards,
Reazuddin MD

Downloading/ Viewing Notes Created on a N96 to an ...

Hello All.
Does anyone know of a process where one can:
1) View 'Notes' created on my N96 on an Apple Mac (i.e. using the Nokia Multimedia Transfer app).
2) Download/ Sync the Notes file(s) to an Apple Mac.
Please note that I've installed the Nokia Multimedia Transfer application. It's a very powerful app, but I can't see where Notes are stored.
Thanks,
K

You can sync your phone with Outlook, export the Notes in Outlook as vCalendar, import those vCalender to the Mac.
Mac iCal allows the vCal importing. I'm not sure if it allows a batch importing, but you can check "Exporting calendar to a phone"
What's the law of the jungle?

Settlement rule not created automatically

HI All,
Every time when i create a maintenance order , system did not create settlement rule automatically , when i click on settlement rule it ask with default or without default and cancel , when i click on with default the only settlement rule generated , please tell where is the gap , it should come automatically
Thanks in advance
Armaan

Hi You can not create automatically at creation, Please check the following IMG setting to make it mandatory at some point so that system will generate it automatically.
Plant Maintenance and Customer Service>Maintenance and Service Processing>Maintenance and Service Orders> Functions and Settings for Order Types> Settlement Rule: Define Time and Creation of Distribution Rule
Other wise try User Exit IWO10027
Thanks,
SS

Outbound delivery not created automatically

Good Day,
A STO posted from a supplying plant to a plant creates an automatic outbound delivery.
When creating the STO with the same supplying plant and plant but a different material the automatic outbound delivery is not created.
What settings should apply to the material as this seems to be the only different input between the two STO.
The config settings seem correct as the automatic outbound delivery does happen when a different material is used.
Thanks
Lindsay

Hi Lindsay,
Check this note:
1069448 - Outbound delivery not created automatically in ME21n for
STO
Also, note that this thread should be moved to Logistic Execution space. This way you can get more helpful answers.
Kind Regards,
Mariano

BDC not creating automatic delivery for consignment fill up in VA01

Hi,
I am doing BDC for consignment fill up in VA01. When munually run VA01, it automatically creating delivery. But when run BDC ( call transaction ) it's not creating automatic delivery. why ? I am giving below fields..
Sales org.
distribution channel
division
customer
item (material)
quantity
batch
pricing condition
price
serial number
please help me...
Venkey

VA01 is order creation, Creating an order does not automatically create a delivery, a delivery is created with VL01N in reference to an order.
Further you should get an error log if you process a BDC, what does it tell you?

SRM: Create Contact Person Could not create user; contact your system admin

Hi All,
First, I am not sure this question should be posted here, or SRM General. From my point of view, here is more suitable.
Our Problem:
Activity "Create Contact Person With Reference" error with message:
Step to reproduce:
1. Login to SRM JAVA as super administrator
2. Open tab "SRM Administration"
3. Using the current query, search for Business-Partner no: 30000725
4. Press "Create Contact Person with Reference"
5. Fill all required fields, tick "Is contact person" checkbox
6. Put: /SAPSRM/SUPPLIER as Role
7. Save
The following Message appear:
Could not create user; contact your system administrator
SPML Service error: Error reading request status. Display Help
Contact Person 2000000214 Created Successfully for BP 30000725 Display Help
E-mail was sent
The first error is intriguing. The username & password is created successfully in ABAP System (Our UME is in ABAP).
QUESTIONS:
1. What cause this problem? How to trace the error?
2. We want the user have portal role automatically. How to achieve that?
Thank you for any responses and helps.
SRM ABAP Version:
SRM_PLUS     700     0009     SAPKIBK209     SRM_PLUS for mySAP SRM
SRM_SERVER     700     0009     SAPKIBKV09     SRM_SERVER
SAP_ABA     701     0007     SAPKA70107     Cross-Application Component
SAP_BASIS     701     0008     SAPKB70108     SAP Basis Component
PI_BASIS     701     0007     SAPK-70107INPIBASIS     Basis Plug-In
SRM JAVA Version:
SRM JAVA: Release 7 SP Level 9.0
BP SRM: Release 7 SP Level 9.0
Edited by: Nur Agus Suryoko on Mar 11, 2011 11:36 AM
Version information added

Hi Fernando,
Can you please tell me how you resolved this issue ??
Regards,
Adren

CUA: Distribute users from central to specified child systems

Hello!
I've a question concerning CUA: I've added two new systems to our CUA. Now I want to destribute the users of the central-system to the new child-systems accompanied by assigning a specifed role for the child-systems. Unfortunately, the user maintanance - mass changes (SU10) does not support assigning the child-systems to users.
Is there any other possibility (perhaps a report) to automatically distribute the users or is it necessary to access each user manually and assign the child-systems and roles.
Any hint would be appreciated!
Thanks in advance!
Greetings
Wolfgang

Sorry, I was convinced that mass changes don't work for systems - but they do! Next time I'm going to check possibilities in more detail!
Greetings
Wolfgang

Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST

Hi ,
I am getting the below error:
Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST - Model: class com.eligibilitymodel1.EligibilityModel1. The SSO ticket needed for authentication to WD_MODELDATA_DEST has expired. Close all applications and logon anew!
Regards
Anumit

Anumit,
when will you get this error?
if you are getting this while using adaptive rfc model follow this link Could not create JCOClientConnection for logical System:
if it doesnot work
try to reimport the certificate or restart the server
Thanks
Bala Duvvuri

Could not create JCOClientConnection for logical System:

Hi,
I am facing a wierd problem in using the JCO destinations.
I created a page where it is using some JCO destinations say SAP_R3_HumanResources.
when i open the page it is working for the first time .without closing the page if i open the same page again it is giving the following error
Error connecting using JCO.Client: null
Error connecting using JCO.Client: null
Pernr:Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.swissre.CustomData. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
Please let me know how to solve this issue
Thanks
Bala Duvvuri

Hi Bala,
It seems that this is a custom webdynpro application which when executed causes such problem. This might be due to JCO connection not released back to the pool.
Please refer to the following threads and that might be helpful.
Re: JCO Connection close
How to close a model object connection for Adaptive RFC?
You might have to call disconnectIfAlive method on your model.
Regards,
Jigar

Could not create JCOClientConnection for logical System: MUSA_MODEL_DATA

Hi,
I am facing a big problem...I have created WebDynpro Application & when I am running that application from WebDynpro, it's showing the page but giving me the error message as:-
Could not create JCOClientConnection for logical System: MUSA_MODEL_DATA - Model: class com.bcone.bcool.musa.model.MUSABAPI. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
What do I do? what connections I have to check?
pls help.

Hey if you are connecting to SAP system making use of adaptive RFC model you hav to create logical systems(JCOs).So while creating the model you have to specify 2 logical system names(one for model data or on for the meta data).If you have not created the JCOs or if the JCOs are not active then you are going to get this type of error.To activate those JCOs ask your administrator to activate the JCO for metadata of your application.If you are having proper credentials then log on to portal
System administration>webdynpro>expand the local directory>select your project>click on maintain JCOs and activate the JCO for the metadata.
Or else change the logical system in your application.

Could not create JCOClientConnection for logical System: SAP_R3_HumanResour

Hi,
For all the standard ESS (sap.com) the JCo connection used is SAP_R3_HumanResources .
All the applications are working fine.
I am trying to add a test Component in one of the (sap.com~eepro) for testing a standard BAPI call for getting user details.
I have used the same Model and the same SAP_R3_HumanResources destination name.
But i get the following error when i try to execute the standard BAPI_USER_GETDetails (non - HR).The other applications for standard components (Vc ) work when i run the application.
My question here is why a custom , local webdynpro when try to make a RFC call using the running already existing JCO connection throws such error.
How could this be solved.Note the connection is running and working fine for all the ESS webdynpros!!
Error:
Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.test.hr.model.Test. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
Your experience would be worthy enough.
Regards,
Swathi

Hi Swathi,
Here are some suggestions to trace down to the actual problem.
1) First check if all users are having this issue. (All other applications working and only one application giving problem)
2) If no, then take list of users having this problem and check their portal and SAP accounts
3) If yes, then concentrate on testing the JCo connections and the user account mapped in JCo settings
Possible things u can check is user's portal account (locked or not), SAP account (lock or validity), pernr mapped (validity), JCo user (check for lock), ping and test JCo connections
If none of them are issue, check the logs if there are any trace for this issue. I believe there must be certainly one. That can help u going further.
Regards,
Harini S

CUA and SU10: unexpected deletion in all child systems

Hi,
I am facing with a problem with SU10 and CUA.
I have updated a lot of users with SU10 in CUA. For 20 users in a child system, I first add a new role, everything is fine. Then I perform a remove of a old role (I know that the end date will be changed), everything is fine except for one user. All roles were removed from all systems where the user is defined ! However, when I look in each child systems, it is not the case, the roles are well present except in the child sytem for which I do the remove.
This problem occurs twice, for different users. It is a real problem because we have to adapt a lot of users.
I have reinstalled the 'missing' roles with SCUG and with the change document for users but it can be a workaround because I have discovered this by chance. I can imagine check all users after each run of SU10.
Hope someone can help me.
Regards

Hi Olivier,
that sounds like you are facing the problem corrected with sap note #1117530......
The removal shows up only at the next change of a user, the actual deletion of role assignements because of the copy might have happend already some time ago.....
b.rgds, Bernhard

Views not created in Oracle.

The Migration process did not create views in the oracle schema. The access source database has 60 queries. There are no errors in the error log about view creation. As I understand, the migration process should convert the queries in access 2000 as views in Oracle 9i. Any ideas? Thanks in advance.

Hi,
You mention that the MS Access database contained 60 queries. Can you please verify the following:
1. In the Source Model of the Migration Workbench, a node titled "Queries(60)" is displayed in the database tree.
2. In the Oracle Model of the Migration Workbench, a node titled "Views(60)" is displayed in the Users | <database_name>.
Basically for each captured MS Access query, there should be a corresponding view created in the source model. If errors were reported during the mapping phase, then such errors will not be reported in the error.log file. I would suggest reviewing the contents of the Log Window and check for any parsing errors reported during the Capture phase of the migration process. You can access the Log Window via the Tools | Log Window menu option of the workbench. From this window, select the Edit | Preferences menu option and select "Error Messages" to just display any reported error messages. Please refer to the documentation for further information on the migration of queries. Some may require manual changes, if they failed during the parsing process.
I hope this helps.
Regards,
Hilary

CUA: Model view not created automatically in Child System

Similar Messages

Maybe you are looking for