CUA on dedicated client or not?

Dear all,
we have CUA under Solution Manager productive client. But we can't decide if this is correct or not. Because SOLMAN is a productive system with other scenarios (service desk, etc) we don't know if this mixing (CUA and Service desk) is correct. As we search in (manuals, notes, forums) we didn't found any specifi answer if CUA client must be in a standalone client and why.
According to "SAP Help" you must install CUA technology in different standalone client. But we can't find restrictions or implact if we mix the CUA with another CLIENT in landscape.
Of course, if install CUA in dedicated client, then you have one more step in the complexity. And we don't know if this complexity can help us somewhere.
Does anyone have an idea on that?
Thanks in advance,

Ok yes i agree, but in our company we have full implemented roles and authorizations for all users in our landscape. And because we are under "SOX" policy we have lot of restrictions in authorizations objects.
So, technically speaking i agree to migrate CUA in dedicated client, but i need help to persuade our technical management team for the real advantages of increasing complexity in our landscape.
Thanks,

Similar Messages

How to run siebel dedicated client in a IE sandbox

Hi all,
I don't know if sandbox is the right term for this, but here is what I need to do. We use Internet Explorer 8 to run our Siebel 8.1.1.10 version. Our Enterprise want's to install a newer IE version, but they cannot because Siebel requieres IE 8. I must admit, that I am not aware why it would not run on newer IE versions but they made a test and it failed. The solution to this would be to migrate to Open UI but due to high costs this is not an option.
However, our Windows Engeneers developed a package to run IE8 in a sandbox. So we have IE8 installed under C:/Program Files/Internet Explorer and have a sandbox folder C:/Workarea/SiebelApps Thinapp_V2/ where another Internet Explorer8.exe is located. We use a separate Registry within the sandbox folder. The target is to have IE12 installed under Program Files and IE8 in a sandbox. We are able to open the webclient using the sandbox IE8 exe and everything seems to work fine. But if we try to open the dedicated client the application doesn't start. IE shows "Internet Explorer cannot display the webpage". The URL is "http://localhost/start.swe" so this seems to be ok.
To start the dedicated Client we use the command line. We added the parameter /b pointing to the sandbox IE8 exe File (as you may see we use DEU language on Windows...)
START "" /D "C:\Programme\APP\SIA\Client_81110\BIN" "C:\Programe\APP\SIA\Client_81110\bin\siebel.exe" /c "C:\Programe\APP\SIA\Client_81110\bin\deu\zkbconnect_kfg2.cfg" /b "C:\Workarea\SiebelApps Thinapp_V2\Internet Explorer 8.exe" /u T580 /p T580 /d ServerDataSrc
It seems to me that start.swe command cannot be found.
If we remove the /b parameter so that siebel uses the IE installed under Program Files the dedicated client starts and works.
Has anyone tried to do something like this before or has a hint on how we could do this?
Kind Regards
Claudio
We found an issue description in Oracle SupportWeb. There is a problem with the /b parameter found in 8.1.1.6. The Bug has been closed without a solution. Just naming the workarround to use the default browser. However I would say that the workaround was just a way to close a bug they do not want or cannot close because you would not need /b to open Siebel in the default browser. You would just use it if you want Siebel to open in a browser that is not set as default. So I will close this thread because there will never be a solution to this problem.
https://support.oracle.com/epmos/faces/DocumentDisplay?id=1378545.1
Nachricht geändert durch user3261506

Hello Chetan,
Thank you for the hints.
Dedicated Client itself works fine if we use the standard IE browser installed on the windows machine. We are just not able to start the Dedicated Client if we use the IE installed as a sandbox. Actually it is better to say, that the Dedicated Client starts, but IE throws an exception that it cannot connect to the website. It is maybe clearer if i put this in context:
Using the IE Standard Browser:
Shortcut: C:\APP\SIA\Client_81110\BIN\siebel.exe /b "C:\Program Files\Internet Explorer\iexplore.exe" /c "C:\APP\SIA\Client_81110\bin\deu\zkbconnect_eng1.cfg"
1. When I press the shortcut, Siebel asks for my credentials.
2. Type in logon Id and password
3. Dedicated Client starts in IE. URL is http://localhost/start.swe
4. Siebel Application starts and the siebel homepage is shown in IE.
--> So everything OK
Using the IE Standbox Browser (just the /b parameter is different):
Shortcut: C\APP\SIA\Client_81110\BIN\siebel.exe /b "C:\Workarea\SiebelApps Thinapp_V2\Internet Explorer8.exe" /c "C:\APP\SIA\Client_81110\bin\deu\zkbconnect_eng1.cfg"
1. When I press the shortcut, Siebel asks for my credentials.
2. Type in logon Id and password
3. Dedicated Client starts in IE. URL is http://localhost/start.swe
4. Siebel is unable to load the homepage. We get a connection error instead. "Internet Explorer cannot display the webpage"
--> NOK
We actually just want the Dedicated Client to start with a differen browser. But this failes for unknown reasons. As you mentioned we tried to renaming the exe-File so that it would not contain spaces. Unfortunatly it did not help.
The client log files doesn't show any connection error on debug level 5. So we have no idea what could be the problem is.
Our windows team is currently analysing the registry files in the sandbox to check if there is a problem. If they get me new information I will post this in the thread.
Kind Regards,
Claudio

Dedicated client opening in read only mode

Hi
This is my dedicated client and yes this is the fresh installation .I have only applied 8.1..1.9 patches on my dedicated client for open ui.
I did not apply any QF for this .I have already checked the logs but it is still showing in read only mode after doing upgradation and all changes.
Thanks

Hi,
a new upgrade local database version is available to local database. You need start a Siebel Remote session to retrieve the upgrade kit, or you need rextract a new database with the new upgrade.
Regards.

530 5.7.1 Client was not authenticated - Exchange 2013 to external domains

Hi all,
I have an Exchange server 2013 on windows 2012 R2 and do all the configuration for sending and receiving the mail according to the document provided by Microsoft.
But whenever I am trying to send mails from external domains to my exchange server domain I got the following error:
530 5.7.1 Client was not authenticated
Same thing I am getting If I am sending mail through outlook from my Exchange domains to external domain.
But if I am selecting the
<label for="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers" id="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers_label">Anonymous
users in the security option of Default Frontend XXXX, I am able to send the mails through outlook.</label>
<label for="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers" id="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers_label">But I don't
want to use this option as it will enable to send the mails without validating the Exchange server user name and password.</label>
SO can anyone please suggest some solutions to resolve this as using Anonymous users fro sending and receiving mails is not secure.
Regards
Pankaj Raman.
<label for="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers" id="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers_label">
</label>

I have a java code for sending mails using the SMTP address of the servers. For sending a mail it required a valid user name and password. For all other SMTP servers if I have used invalid user name and password then I am getting the 530
5.7.1 Client was not authenticated error, but
if I am using my SMTP address and invalid user name and password then also I am able to send the mails.
So I just want to know what I have to configure in the exchange 2013 server so that it will validate the user name and password.
Regards
Pankaj Raman.
Hi Pankaj,
Thank you for your question.
Was invalid user name and password included in Java code?
Did outlook send emails?
If this issue happen on Java code instead of outlook?
In fact, Exchange server didn’t validate user account and password, user account and password will be validated on domain controller,
I suggest we create a new dedicated receive connector and enable “anonymous” permission for java code
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

5.7.1 Client does not have permissions to send as this sender - NLB

Hi there- we have an application which sends out email notifications to a third party vendor. The vendor was previously using Exchange Server 2010 and they have recently migrated to Exchange Server 2013. They have also implemented NLB and have two Client
Access Servers configured.
Our application has been spitting out "SMTP 5.7.1 Client does not have permissions to send as this sender" errors ever since the vendor has implemented NLB. As our application uses the IP address of the Exchange Server, we have tried specifying
the IP address of both the Client Access Servers but that did not help. We then tried specifying the IP address of the NLB which did not make any difference either. The vendor has confirmed that anonymous relay has been enabled on the receive connectors of
both the Client Access Servers. I must add that our application sits on the vendor's server and the application and exchange servers are in the same domain. The "Send From" email address is an existing mailbox configured by the vendor.
Telnet from the App server to the NLB on port 25 has gone through without any dramas.
Is there anything else we would need to check to get this working?
Cheers

Hi
Ensure that an dedicated relay connector is created in new exchaneg 2013 server
assign the correct subnets and the ip address of the app server into the relay connector
Run the below command to grant anonymous permission on the relay connector
Get-ReceiveConnector "Anonymous Relay" | Add-ADPermission -User "NT AUTHORITY\ANONYMOUS LOGON" -ExtendedRights "Ms-Exch-SMTP-Accept-Any-Recipient"
Specify the ip address of the mailbox server in your app server since the transport core services resides on mailbox server and cas server acts as stateless proxy
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Can I replace CUA with CUP. If not why or what will be the risks

Hi,
The client does not want to have two provisioning systems CUP & CUA. The sole purpose they are using CUA is the proper accounting for SAP licenses such that the user ID remains the same across the landscape. No other purpose of using CUA. In this case can I replace CUA with CUP 5.3 SP12.
Thanks & Regards,
Sanjeev

There are limitations to doing that.
CUA has a technology focus and does not take access risk into consideration at all. The long-term successor of this would be Netweaver Identity Management. If you want to consistently manage user master data and license information, that's probably the solution to look at.
You can perfectly use CUP on top of that to manage authorizations. You can also force CUP to only allow user IDs from a central system like CUA or ActiveDirectory in order to enforce user ID consistency.
What CUP will not do is give you an overview of where a user is maintained with which kind of information/license data. That is something that either CUA (for ABAP only) or Netweaver Identity Management will give you.
Frank.

IE11/Win 8.1 error 'Your client does not support opening this list in windows explorer'

I hoping someone might be able to help with this frustrating issue.
I work on a project where we are using various versions of on-line SharePoint (2007/O365). In order to quickly drag and drop folders we need to often open the document libraries by using the 'open in windows explorer view'.
Using the same device, on occassion this works. But often it gives a rather unhelpful message 'Your client does not support opening this list in Windows Explorer'.
I've searched for this issue over the net and confirm that the sites are added to the 'trusted' sites area and that the 'remember you credientials' is checked on logging in.However, the searches do not seem to apply to IE11/Win8.1 or on-line version of sharepoint
(the suggested hot fix is not suitable)
Only this morning, using the same device I was able, for a short while to open in explorer view, and then for no apparent reason, it began to display the error message. I had changed nothing regarding settings or even closed the browser.
Do you have any support/ideas/fixes on how to resolve this.
Many thanks
val

Hi Val,
sometimes an answer can be found on the internet by typing the error message from your computer into your favourite search engine.
eg.
http://www.bing.com/search?q=your+client+does+not+support+opening+this+list+in+windows+explorer&form=IE10TR&src=IE10TR&pc=HPNTDFJS
see
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
follow the directions given above.... you need to add the domains to your Intranet sites list, not the Trusted sites list.
Perhaps you already have it mapped to your intranet zone....in which case make sure that you have unchecked "Enable Enhance Protected Mode" on the Intranet zone dialog in Internet Options.
If this is happening 'randomly' on client machines, then users are probably changing their internet security settings in Internet Options. Ensure they are accepting the default.... Internet Options>Security tab, click "Reset all zones to default".
Consult with your system administrators to find out if they are applying a custom security template for the Intranet zone... It may be removing the sharepoint domains from the client Intranet zone's domains lists.
HTH.
Rob^_^

SharePoint Foundation 2010 - Your client does not support opening this list with windows explorer when clicking Open with Explorer

when I tried to open document library in Windows explorer view by click 'Open with Explorer', it popped up “Your client does not support opening list with windows explorer”
OS: Windows Server 2008 Enterprise x64
IE: 9.0 32bit
webcient service is runing
HKLM\System\CurrentControlSet\services\WebClient\Parameters and changed the BasicAuthLevel to 2 instead of 1.
Anybody knows how?
Thanks.

Did you add your site to trusted site list?
http://sharepoint.stackexchange.com/questions/15098/your-client-does-not-support-opening-this-list-with-windows-explorer
--Cheers

BPC 7.5 Admin Client Links Not Working

I am working in BPC 7.5 SP15 NW. I have recently upgraded to Windows 7 64-bit and now the links in the action pane in the desktop admin client are not working. The cursor does not change from the nornal pointer to the hand. That would indicate that the admin client is no longer recognizing them as links. The links work fine in the desktop Excel client. I am using 32-bit Excel 2010 with no other version of Office installed.
Has anyone heard of this behavior and how to correct for it?

Hi Kannan,
i think this is a Osoft web site configuration issue, the error indicates that you have one duplicate section in the web site configuration file (web.config).
If you didn't alter the web.config file then the problem may occur because when you use framework 4.0, the machine config already has some of the sections defined that were used in previous ASP.NEt versions.
You should check which version of the MS Framework is configured for the application pool of the web site, change it to v2.
Let me know if this solves the issue. Or if you need more help to resolve it.
Kindest regards,

Client does not have permission to send as this sender

We have a CRM web application hosted on a server. When a user launches the site, the site provides facility to the customer to send the query into the system using the email. The website provides the filed for the customer to enter customer’s email ID. The
customer email address is used by the system to send the response back.
We are doing a new implementation for SMTP authentication for the emails send into the contact center using a public website. The flow of the system to use the SMTP authentication is:
Customer launches the website.
Customer chooses to send the his/her query using the email from the website.
Website asks for the customer’s address, so that the query can be
answered back to the provided email address say [email protected] .
We have an account configured on the MS-Exchange 2010 say [email protected]
So before sending the email the website system performs the SMTP Authentication using the credentials of [email protected]
Now the system creates the email MIME using the email address provided by the customer on the website i.e. say [email protected].
After successful SMTP authentication for the address [email protected] system starts sending the email.
Here we are facing the issue:
While sending the email if the customer’s address is also configured on the same exchange used by the system i.e. exchange on [email protected] is configured
then website system is able to relay or send the email.
If the customer’s address is not configured on the same exchange used by the system where [email protected] is configured then the system is not able to send the email it results into the error of: “Client
does not have permission to send as this sender [email protected].
In short if the website performs the SMTP authentication then it requires the FROM address configured on the same exchange used for the smtp authentication in the email MIME from address.
Configuration tries:
As suggested on various forums and at Microsoft tech group we tried following things but no success:
Checked the checkbox “Authenticated Users” selected “Accept any Sender”.
Created a new relay and given the IP of the machine hosting the website or trying to send the email
Run the command from the EMC “Exchange management console”
Add-AdPermission -Identity "Default Receive Connector" -User "NT AUTHORITY\Authenticated Users" -ExtendedRights ms-Exch-SMTP-Accept-Any-Sender.

You can create a new connector to which everything is permitted - eg New-ReceiveConnector -Name "Anonymous Relay" -Usage Custom -PermissionGroups AnonymousUsers -Bindings 10.2.3.4:25 -RemoteIpRanges 192.168.5.77

Remote desktop client software not active

I'm sorry if this has been asked before but I'm a bit bewildered by this errormessage (and I couldn't get a hit when I searched for it) when I try to drag a file from the xserv to the macbook pro desktop, remote desktop client software not active.
The macbook has the ard server and connects to the xserv ppc. It connects over the internet.
The xserv is behind a iptables fw and I have forwarded 3283 tcp/udp plus 5900 udp/tcp to the server. Have I forgotten a port ?
I've read through http://www.starkpr.com/ard.htm as well as http://www.macosxhints.com/article.php?story=20070302234400232&query=vnc%2Bsimpl e%2Bset%2Bup
and tried to find out more from the discsussions here.
The macbook pro sits behind an airport which is hooked into the dsl modem. Do I need to configure port forward in the airport as well.
Connecting to the xserv and working on it works great but the copy file transfer fails.

Hi there I took new try at this and this is what finally solved it for me.
The earlier answer I got was very good advise but I had already done that bit, actually I might have overdone it a bit I had checked all the boxes under the useraccount on sharing.
Back to business.
Firewalling. I realised I need to open and portforward at both locations and remeber it's booth tcp and udp.
So at the xserve location I needed to forward 3283 and 5900 both tcp and udp from outside to the IPnumber of the xserve.
At home with my macbook I needed to do the same.
However this did not solve it, I had forgotten one software on the macbook. On the xserve I had installed ARD upgraded it to 3.1 AND installed the upgrade for ARD 3.1 client. The client part I had forgotten at home. So once my ARD and ARD client software matched I could connect to the xserve and drag and drop files booth ways.
ARD wasn't running on the xserve I just had it installed along with the client software.
So portforwarding in firewalls and the same software and versions in all locations seems to have solved it for me.
A small note enabling/disabling the firewall in macbookpro did nothing for me since when enabled ARD rules were in place and active so it still worked.
I hope I made some sense.
Message was edited by: tindome
Message was edited by: tindome

SA540 SSL VPN Client will not install on Windows 7

I had the SSL VPN Client working on my Windows 7 laptop. I tried to use the SSL VPN through Firefox and now my client does not work on IE anymore.
The install process beings and the progress bar makes it halfway before I get an error saying the install failed.
I tried everything I could to remove the SSL VPN client manually. I even followed the instructions posted at the end of this forum posting: https://cisco-support.hosted.jivesoftware.com/thread/2018716?decorator=print&displayFullThread=true
Nothing has worked.
The best I can find is the VPN Client is crashing during install. I saw this in the Event Log.
Fault bucket 177244756, type 5
Event Name: PnPDriverInstallError
Response: Not available
Cab Id: 0
Problem signature:
P1: x64
P2: E0000234
P3: ssldrv.inf
P4: 93775c2b0faa616bc11a47d4ff617aa8d00cd56f
P5: SSLDrv.Ndi
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Users\shudson\AppData\Local\Temp\DMIE984.tmp.log.xml
C:\Windows\inf\oem54.inf
These files may be available here:
C:\Users\shudson\AppData\Local\Microsoft\Windows\WER\ReportArchive\NonCritical_x64_d317f66069d2e3b17f6bc1e7306afd9085494a_1020fe2c
Analysis symbol:
Rechecking for solution: 0
Report Id: 75c67e96-1882-11e0-8e4d-5c260a0235ed
Report Status: 0
I then used AppCrashView to see the crash report and I get this:
Version=1
EventType=APPCRASH
EventTime=129386443518175301
ReportType=2
Consent=1
UploadTime=129386443518799293
ReportIdentifier=2a4c4f0a-183c-11e0-aac2-5c260a0235ed
IntegratorReportIdentifier=2a4c4f09-183c-11e0-aac2-5c260a0235ed
WOW64=1
Response.BucketId=2007535968
Response.BucketTable=1
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=VirtualPassageExe.exe
Sig[1].Name=Application Version
Sig[1].Value=1.7.3.1
Sig[2].Name=Application Timestamp
Sig[2].Value=4b20cf25
Sig[3].Name=Fault Module Name
Sig[3].Value=OLEAUT32.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=6.1.7600.16567
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=4bbc2f3d
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=00004660
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7600.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=0a9e
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=0a9e372d3b4ad19135b953a78882e789
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=0a9e
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=0a9e372d3b4ad19135b953a78882e789
UI[2]=C:\Users\shudson\CiscoCisco-SSLVPN-Tunnel\VirtualPassageExe.exe
UI[3]=VirtualPassageExe MFC Application has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Users\shudson\CiscoCisco-SSLVPN-Tunnel\VirtualPassageExe.exe
LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
LoadedModule[2]=C:\Windows\syswow64\kernel32.dll
LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll
LoadedModule[4]=C:\Windows\system32\MFC42.DLL
LoadedModule[5]=C:\Windows\syswow64\msvcrt.dll
LoadedModule[6]=C:\Windows\syswow64\USER32.dll
LoadedModule[7]=C:\Windows\syswow64\GDI32.dll
LoadedModule[8]=C:\Windows\syswow64\LPK.dll
LoadedModule[9]=C:\Windows\syswow64\USP10.dll
LoadedModule[10]=C:\Windows\syswow64\ADVAPI32.dll
LoadedModule[11]=C:\Windows\SysWOW64\sechost.dll
LoadedModule[12]=C:\Windows\syswow64\RPCRT4.dll
LoadedModule[13]=C:\Windows\syswow64\SspiCli.dll
LoadedModule[14]=C:\Windows\syswow64\CRYPTBASE.dll
LoadedModule[15]=C:\Windows\syswow64\ole32.dll
LoadedModule[16]=C:\Windows\syswow64\OLEAUT32.dll
LoadedModule[17]=C:\Windows\system32\ODBC32.dll
LoadedModule[18]=C:\Windows\syswow64\SHELL32.dll
LoadedModule[19]=C:\Windows\syswow64\SHLWAPI.dll
LoadedModule[20]=C:\Windows\system32\apphelp.dll
LoadedModule[21]=C:\Windows\AppPatch\AcLayers.DLL
LoadedModule[22]=C:\Windows\system32\USERENV.dll
LoadedModule[23]=C:\Windows\system32\profapi.dll
LoadedModule[24]=C:\Windows\system32\WINSPOOL.DRV
LoadedModule[25]=C:\Windows\system32\MPR.dll
LoadedModule[26]=C:\Windows\system32\IMM32.DLL
LoadedModule[27]=C:\Windows\syswow64\MSCTF.dll
LoadedModule[28]=C:\Windows\system32\odbcint.dll
LoadedModule[29]=C:\Windows\system32\uxtheme.dll
LoadedModule[30]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7600.16661_none_ebfb56996c72aefc\COMCTL32.DLL
LoadedModule[31]=C:\Windows\system32\dwmapi.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=VirtualPassageExe MFC Application
AppPath=C:\Users\shudson\CiscoCisco-SSLVPN-Tunnel\VirtualPassageExe.exe
None of this makes any sense to me, but may someone can tell me why the install is failing?
Thanks,
Scott

Mario,
I tried everything you mentioned. I cleared cookies and temporary files. I enabled SSL 3.0. I restarted IE.
I get the same thing. The install process starts and then ends at suddenly saying the install failed.
Scott

"Client error not found" = DOOOOOOOOMMMMMM!!!!!!!

Ok been getting this a lot recently and I think it is to do with my printer setup script. There must be a way to fix it, but for the life of me I can not find the solution.
It usually starts with all printers on the system being paused. You can unpause them, but as soon as you try print they automatically pause again.
You can reset the print system, but when you try readd a printer you get the message of doom "client-error-not-found".
From then on I can not add any printer to the system and the only fix is a wipe and reinstall.
I mentioned above that I use a printer script to install the 10+ printers in the office onto the 80+ machines. All the machines are running 10.5 and upto date.
I have put the script to have a look at, but even if it is causing the problem there should be a way to fix the issue.
#Reset print system.
do shell script "lpstat -p | cut -d' ' -f2 | xargs -I{} lpadmin -x {}" with administrator privileges
#log onto the server and mounts the IT_support folder. If the IT_support folder is already mounted it will skip the mount and move on.
if {"IT_support"} is not in paragraphs of (do shell script "/bin/ls /Volumes") then
mount volume "afp://192.168.1.251/IT_support"
end if
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/drivers/* /Library/printers/PPDs/Contents/Resources/" with administrator privileges
#Add the printers to the system.
#Colour Printers.
#Colour_Printroom Appletalk.
do shell script "lpadmin -p Colour_PrintRoom -L FirstFloorPrintRoom -E -v pap://*/Colour_PrintRoom/LaserWriter -P /Library/printers/PPDs/Contents/Resources/xrx7655.ppd -o printer-is-shared=false" with administrator privileges
#Colour_Kitchen Appletalk.
do shell script "lpadmin -p Colour_Kitchen -L First\\ Floor\\ Kitchen -E -v pap://*/DC3535_DC3535Print/LaserWriter -P /Library/printers/PPDs/Contents/Resources/Xerox\\ DocuColor3535\\ PS -o printer-is-shared=false" with administrator privileges
#BizHub Appletalk.
do shell script "lpadmin -p Colour_BizHub -L Colour_BizHub -E -vpap://*/X3eBizhub45035C-KMPrint/LaserWriter -P /Library/printers/PPDs/Contents/Resources/en.lproj/Fiery\\ X3eTY\\ 35C-KM\\ PS\\ v2.01\\ eu -o printer-is-shared=false" with administrator privileges
#Admin Printers.
#Reception Bonjour.
do shell script "lpadmin -p Reception -L Ground\\ Floor\\ Reception -E -v mdns://Reception%20%2892%3A1b%3A58%29.pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
#A3_Northside Bonjour.
do shell script "lpadmin -p A3_Northside -L First\\ Floor\\ North\\ Side -E -v mdns://A3Northside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
#A3_Southside Bonjour.
do shell script "lpadmin -p A3_Southside -L First\\ Floor\\ South\\ Side -E -v mdns://A3Southside._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 5500DN.gz -o printer-is-shared=false" with administrator privileges
#Studio3_Admin Bonjour.
do shell script "lpadmin -p Studio3_Admin -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
#Studio1_Admin Bonjour.
do shell script "lpadmin -p Studio1_Admin -L First\\ Floor\\ Studio\\ 1 -E -v mdns://Studio1Admin%20%2892%3A41%3Af6%29._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4500DT.gz -o printer-is-shared=false" with administrator privileges
#Studio3_A3 Bonjour.
do shell script "lpadmin -p Studio3_A3 -L First\\ Floor\\ Studio\\ 4 -E -v mdns://Studio3A3._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ LaserJet\\ 5100\\ Series.gz -o printer-is-shared=false" with administrator privileges
#Plotters.
#PlotterDeathstarHP4500ps Bonjour.
do shell script "lpadmin -p PlotterDeathStarHP4500ps -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterDeathstar_HP4500ps._printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/HP\\ Designjet\\ 4500\\ PS3.gz -o printer-is-shared=false" with administrator privileges
#PlotterPosterEpson7600 Bonjour.
do shell script "lpadmin -p PlotterPosterEpson7600 -L First\\ Floor\\ Print\\ Room -E -v mdns://PlotterPosterEpson7600.printer.tcp.local. -P /Library/printers/PPDs/Contents/Resources/en.lproj/stp-escp2-7600.5.2.ppd.gz -o printer-is-shared=false" with administrator privileges
#Copy a fresh copy of the printer driver settings back onto the system after the printers have been installed. driver settings are stored in /etc/cups/PPD admin rights required to copy files into this folder
do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/ppd/* /etc/cups/PPD" with administrator privileges
#Copy printer presets on to system.
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences" with administrator privileges
#The following printer is added into the system speratly due to a driver selection issue when adding more than one Xerox Phaser 4510DT. The system seems to apply the correct driver to the first one that is added to the system. The second Xerox Phaser 4510DT does not get the correct driver applied to it.
#Studio2_Admin Bonjour.
do shell script "lpadmin -p Studio2_Admin -L First\\ Floor\\ Studio\\ 2 -E -v mdns://Studio2Admin._pdl-datastream.tcp.local./?bidi -P /Library/printers/PPDs/Contents/Resources/Xerox\\ Phaser\\ 4510DT.gz -o printer-is-shared=false" with administrator privileges
#Copy printer presets on to system.
do shell script "cp -frv /Volumes/ITsupport/01_Mac/04Printers/PrinterAutoInstall/presets/* /Library/Preferences"
do shell script "cp -fRv /Volumes/ITsupport/01_Mac/04_Printers/PrinterAutoInstall/ppd/Studio2Admin.ppd /etc/cups/PPD/" with administrator privileges
#Reset file permissions
do shell script "chmod 664 /Library/Printers/PPDs/Contents/Resources/*" with administrator privileges

Well, I succeeded in solving the problem by myself ...
The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

Can't delete printer - client-error-not-found

After messing around with the installation of a cups based network printer (via a local Suse server) I came across some strange problems with my printer setup utility. Currently, I can neither delete nor add a printer from the list for the current user. When trying to delete a previously installed network printer I get an error message that the printer could not be removed (client-error-not-found). When trying to add a new printer I won't get an error message, but the printer is not being added to the list anyhow.
I already tried to reset the printing system both with the printer setup utility and with the Printer Setup Repair Tool from Fixamac, both without success.
I have to note that for user root everything works fine!
Any suggestions?
Wolfgang
MacBook Pro Mac OS X (10.4.8)

Well, I succeeded in solving the problem by myself ...
The problem was a local .cupsrc file containing some apparently wrong settings. Removing this file solved the problem ...

URGENT*** Test Client testpoint not generated in WebLogic 10.3.0.0

Hi,
I have created very basic "Java EE 1.5 with support for jax-ws Annotations" web service and deploying in to web logic server 10.3.0.0. I am using Jdeveloper 11g for convert my java file to web service and deploying the same in to WLS directly from Jdev IDE.
Problem is, I cant able to see "Test Client" testPoint in order to test my webservice. When I access my web service via WLS admin console can able to see only "?WSDL" test point at TESTING tab and WSDL is accessible. But Test client is not getting generated.
Please help me, what am I missing here, why the WLServer not generating the test client. Am I missing any setting at server side. Please help me. Below is my web service code.
package edu.ws;
import javax.jws.WebService;
*@WebService(serviceName = "demoWS", portName = "demoWSSoapHttpPort")*
public class demoWS
public demoWS()
public String fullName(String fn, String ln)
String fullName = fn + ln;
return fullName;
WSDL file:
*
*
*<definitions targetNamespace="http://ws.syu.edu/" name="demoWS">*
*<types>*
*<xsd:schema>*
*<xsd:import namespace="http://ws.syu.edu/" schemaLocation="http://192.168.88.131:7001/DemoWebService-DemoWS-context-root/demoWSSoapHttpPort?xsd=1"/>*
*</xsd:schema>*
*</types>*
*<message name="fullName">*
*<part name="parameters" element="tns:fullName"/>*
*</message>*
*<message name="fullNameResponse">*
*<part name="parameters" element="tns:fullNameResponse"/>*
*</message>*
*<portType name="demoWS">*
*<operation name="fullName">*
*<input message="tns:fullName"/>*
*<output message="tns:fullNameResponse"/>*
*</operation>*
*</portType>*
*<binding name="demoWSSoapHttpPortBinding" type="tns:demoWS">*
*<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>*
*<operation name="fullName">*
*<soap:operation soapAction=""/>*
*<input>*
*<soap:body use="literal"/>*
*</input>*
*<output>*
*<soap:body use="literal"/>*
*</output>*
*</operation>*
*</binding>*
*<service name="demoWS">*
*<port name="demoWSSoapHttpPort" binding="tns:demoWSSoapHttpPortBinding">*
*<soap:address location="http://192.168.88.131:7001/DemoWebService-DemoWS-context-root/demoWSSoapHttpPort"/>*
*</port>*
*</service>*
*</definitions>*
Thanks
klogube

Hi LJ,
I did the same. I configured my WLS for development mode by making production_mode = false. But still I cant able to open http://localhost:7001/wls_utc window and so far cant able to test my WS :(
Please check my config file and let me know where else I suppose to make the production mode false!!
#!/bin/sh
# WARNING: This file is created by the Configuration Wizard.
# Any changes to this script may be lost when adding extensions to this configuration.
# --- Start Functions ---
BP=100
SP=$BP
pushd()
     if [ -z "$1" ]
     then
          return
     fi
     SP=`expr $SP - 1`
     eval _stack$SP=`pwd`
     cd $1
     return
popd()
     if [ $SP -eq $BP ]
     then
          return
     fi
     eval cd \${_stack$SP}
     SP=`expr $SP + 1`
     return
# --- End Functions ---
# This script is used to setup the needed environment to be able to start Weblogic Server in this domain.
# This script initializes the following variables before calling commEnv to set other variables:
# WL_HOME - The BEA home directory of your WebLogic installation.
# JAVA_VM - The desired Java VM to use. You can set this environment variable before calling
# this script to switch between Sun or BEA or just have the default be set.
# JAVA_HOME - Location of the version of Java used to start WebLogic
# Server. Depends directly on which JAVA_VM value is set by default or by the environment.
# USER_MEM_ARGS - The variable to override the standard memory arguments
# passed to java.
# PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
# DOMAIN_PRODUCTION_MODE
# - The variable that determines whether the workshop related settings like the debugger,
# testconsole or iterativedev should be enabled. ONLY settable using the
# command-line parameter named production
# NOTE: Specifying the production command-line param will force
# the server to start in production mode.
# Other variables used in this script include:
# SERVER_NAME - Name of the weblogic server.
# JAVA_OPTIONS - Java command-line options for running the server. (These
# will be tagged on to the end of the JAVA_VM and
# MEM_ARGS)
# For additional information, refer to the WebLogic Server Administration
# Console Online Help(http://e-docs.bea.com/wls/docs103/ConsoleHelp/startstop.html).
ORACLE_HOME="/opt/oracle/middleware/jdeveloper"
export ORACLE_HOME
WL_HOME="/opt/oracle/middleware/wlserver_10.3"
export WL_HOME
BEA_JAVA_HOME="/opt/oracle/middleware/jrockit_160_05"
export BEA_JAVA_HOME
SUN_JAVA_HOME=""
export SUN_JAVA_HOME
if [ "${JAVA_VENDOR}" = "BEA" ] ; then
     JAVA_HOME="${BEA_JAVA_HOME}"
     export JAVA_HOME
else
     if [ "${JAVA_VENDOR}" = "Sun" ] ; then
          JAVA_HOME="${SUN_JAVA_HOME}"
          export JAVA_HOME
     else
          JAVA_VENDOR="BEA"
          export JAVA_VENDOR
          JAVA_HOME="/opt/oracle/middleware/jrockit_160_05"
          export JAVA_HOME
     fi
fi
# We need to reset the value of JAVA_HOME to get it shortened AND
# we can not shorten it above because immediate variable expansion will blank it
JAVA_HOME="${JAVA_HOME}"
export JAVA_HOME
SAMPLES_HOME="${WL_HOME}/samples"
export SAMPLES_HOME
DOMAIN_HOME="/opt/oracle/middleware/user_projects/domains/base_domain"
export DOMAIN_HOME
LONG_DOMAIN_HOME="/opt/oracle/middleware/user_projects/domains/base_domain"
export LONG_DOMAIN_HOME
if [ "${DEBUG_PORT}" = "" ] ; then
     DEBUG_PORT="8453"
     export DEBUG_PORT
fi
if [ "${SERVER_NAME}" = "" ] ; then
     SERVER_NAME="AdminServer"
     export SERVER_NAME
fi
POINTBASE_FLAG="false"
export POINTBASE_FLAG
enableHotswapFlag=""
export enableHotswapFlag
PRODUCTION_MODE="false"
export PRODUCTION_MODE
doExitFlag="false"
export doExitFlag
verboseLoggingFlag="false"
export verboseLoggingFlag
while [ $# -gt 0 ]
do
     case $1 in
     nodebug)
          debugFlag="false"
          export debugFlag
     production)
          DOMAIN_PRODUCTION_MODE="true"
          export DOMAIN_PRODUCTION_MODE
     notestconsole)
          testConsoleFlag="false"
          export testConsoleFlag
     noiterativedev)
          iterativeDevFlag="false"
          export iterativeDevFlag
     noLogErrorsToConsole)
          logErrorsToConsoleFlag="false"
          export logErrorsToConsoleFlag
     nopointbase)
          POINTBASE_FLAG="false"
          export POINTBASE_FLAG
     doExit)
          doExitFlag="true"
          export doExitFlag
     noExit)
          doExitFlag="false"
          export doExitFlag
     verbose)
          verboseLoggingFlag="true"
          export verboseLoggingFlag
     enableHotswap)
          enableHotswapFlag="-javaagent:${WL_HOME}/server/lib/diagnostics-agent.jar"
          export enableHotswapFlag
          PROXY_SETTINGS="${PROXY_SETTINGS} $1"
          export PROXY_SETTINGS
     esac
     shift
done
MEM_DEV_ARGS=""
export MEM_DEV_ARGS
if [ "${DOMAIN_PRODUCTION_MODE}" = "true" ] ; then
     PRODUCTION_MODE="${DOMAIN_PRODUCTION_MODE}"
     export PRODUCTION_MODE
fi
if [ "${PRODUCTION_MODE}" = "true" ] ; then
     debugFlag="false"
     export debugFlag
     testConsoleFlag="false"
     export testConsoleFlag
     iterativeDevFlag="false"
     export iterativeDevFlag
fi
# If you want to override the default Patch Classpath, Library Path and Path for this domain,
# Please uncomment the following lines and add a valid value for the environment variables
# set PATCH_CLASSPATH=[myPatchClasspath] (windows)
# set PATCH_LIBPATH=[myPatchLibpath] (windows)
# set PATCH_PATH=[myPatchPath] (windows)
# PATCH_CLASSPATH=[myPatchClasspath] (unix)
# PATCH_LIBPATH=[myPatchLibpath] (unix)
# PATCH_PATH=[myPatchPath] (unix)
. ${WL_HOME}/common/bin/commEnv.sh
WLS_HOME="${WL_HOME}/server"
export WLS_HOME
MEM_ARGS="-Xms256m -Xmx512m"
export MEM_ARGS
MEM_PERM_SIZE="-XX:PermSize=48m"
export MEM_PERM_SIZE
MEM_MAX_PERM_SIZE="-XX:MaxPermSize=192m"
export MEM_MAX_PERM_SIZE
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
     if [ "${PRODUCTION_MODE}" = "" ] ; then
          MEM_DEV_ARGS="-XX:CompileThreshold=8000 ${MEM_PERM_SIZE} "
          export MEM_DEV_ARGS
     fi
fi
# Had to have a separate test here BECAUSE of immediate variable expansion on windows
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
     MEM_ARGS="${MEM_ARGS} ${MEM_DEV_ARGS} ${MEM_MAX_PERM_SIZE}"
     export MEM_ARGS
fi
if [ "${JAVA_VENDOR}" = "HP" ] ; then
     MEM_ARGS="${MEM_ARGS} ${MEM_MAX_PERM_SIZE}"
     export MEM_ARGS
fi
# IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values
if [ "${USER_MEM_ARGS}" != "" ] ; then
     MEM_ARGS="${USER_MEM_ARGS}"
     export MEM_ARGS
fi
JAVA_PROPERTIES="-Dplatform.home=${WL_HOME} -Dwls.home=${WLS_HOME} -Dweblogic.home=${WLS_HOME} "
export JAVA_PROPERTIES
# To use Java Authorization Contract for Containers (JACC) in this domain,
# please uncomment the following section. If there are multiple machines in
# your domain, be sure to edit the setDomainEnv in the associated domain on
# each machine.
# -Djava.security.manager
# -Djava.security.policy=location of weblogic.policy
# -Djavax.security.jacc.policy.provider=weblogic.security.jacc.simpleprovider.SimpleJACCPolicy
# -Djavax.security.jacc.PolicyConfigurationFactory.provider=weblogic.security.jacc.simpleprovider.PolicyConfigurationFactoryImpl
# -Dweblogic.security.jacc.RoleMapperFactory.provider=weblogic.security.jacc.simpleprovider.RoleMapperFactoryImpl
EXTRA_JAVA_PROPERTIES="-Ddomain.home=${DOMAIN_HOME} -Doracle.home=${ORACLE_HOME} -Doracle.security.jps.config=${DOMAIN_HOME}/config/oracle/jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol ${EXTRA_JAVA_PROPERTIES}"
export EXTRA_JAVA_PROPERTIES
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${EXTRA_JAVA_PROPERTIES}"
export JAVA_PROPERTIES
ARDIR="${WL_HOME}/server/lib"
export ARDIR
pushd ${LONG_DOMAIN_HOME}
# Clustering support (edit for your cluster!)
if [ "${ADMIN_URL}" = "" ] ; then
     # The then part of this block is telling us we are either starting an admin server OR we are non-clustered
     CLUSTER_PROPERTIES="-Dweblogic.management.discover=true"
     export CLUSTER_PROPERTIES
else
     CLUSTER_PROPERTIES="-Dweblogic.management.discover=false -Dweblogic.management.server=${ADMIN_URL}"
     export CLUSTER_PROPERTIES
fi
if [ "${LOG4J_CONFIG_FILE}" != "" ] ; then
     JAVA_PROPERTIES="${JAVA_PROPERTIES} -Dlog4j.configuration=file:${LOG4J_CONFIG_FILE}"
     export JAVA_PROPERTIES
fi
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${CLUSTER_PROPERTIES}"
export JAVA_PROPERTIES
# Clear the pre_classpath here in case an application template wants to set it before the larger pre_classpath is invoked below
PRE_CLASSPATH=""
export PRE_CLASSPATH
JAVA_DEBUG=""
export JAVA_DEBUG
if [ "${debugFlag}" = "true" ] ; then
     JAVA_DEBUG="-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=${DEBUG_PORT},server=y,suspend=n -Djava.compiler=NONE"
     export JAVA_DEBUG
     JAVA_OPTIONS="${JAVA_OPTIONS} ${enableHotswapFlag} -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole..."
     export JAVA_OPTIONS
else
     JAVA_OPTIONS="${JAVA_OPTIONS} ${enableHotswapFlag} -da"
     export JAVA_OPTIONS
fi
if [ ! -d ${JAVA_HOME}/lib ] ; then
     echo "The JRE was not found in directory ${JAVA_HOME}. (JAVA_HOME)"
     echo "Please edit your environment and set the JAVA_HOME"
     echo "variable to point to the root directory of your Java installation."
     popd
     read _val
     exit
fi
if [ "${POINTBASE_FLAG}" = "true" ] ; then
     DATABASE_CLASSPATH="${POINTBASE_CLASSPATH}"
     export DATABASE_CLASSPATH
else
     DATABASE_CLASSPATH="${POINTBASE_CLIENT_CLASSPATH}"
     export DATABASE_CLASSPATH
fi
POST_CLASSPATH=""
export POST_CLASSPATH
POST_CLASSPATH="${ORACLE_HOME}/modules/features/adf.share_11.1.1.jar${CLASSPATHSEP}${POST_CLASSPATH}"
export POST_CLASSPATH
POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}${DATABASE_CLASSPATH}${CLASSPATHSEP}${ARDIR}/xqrl.jar"
export POST_CLASSPATH
# PROFILING SUPPORT
JAVA_PROFILE=""
export JAVA_PROFILE
SERVER_CLASS="weblogic.Server"
export SERVER_CLASS
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${WLP_JAVA_PROPERTIES}"
export JAVA_PROPERTIES
JAVA_OPTIONS="${JAVA_OPTIONS} ${JAVA_PROPERTIES} -Dwlw.iterativeDev=${iterativeDevFlag} -Dwlw.testConsole=${testConsoleFlag} -Dwlw.logErrorsToConsole=${logErrorsToConsoleFlag}"
export JAVA_OPTIONS
# -- Setup properties so that we can save stdout and stderr to files
if [ "${WLS_STDOUT_LOG}" != "" ] ; then
     echo "Logging WLS stdout to ${WLS_STDOUT_LOG}"
     JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.Stdout=${WLS_STDOUT_LOG}"
     export JAVA_OPTIONS
fi
if [ "${WLS_STDERR_LOG}" != "" ] ; then
     echo "Logging WLS stderr to ${WLS_STDERR_LOG}"
     JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.Stderr=${WLS_STDERR_LOG}"
     export JAVA_OPTIONS
fi
# ADD EXTENSIONS TO CLASSPATHS
if [ "${EXT_PRE_CLASSPATH}" != "" ] ; then
     PRE_CLASSPATH="${EXT_PRE_CLASSPATH}${CLASSPATHSEP}${PRE_CLASSPATH}"
     export PRE_CLASSPATH
fi
if [ "${EXT_POST_CLASSPATH}" != "" ] ; then
     POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}${EXT_POST_CLASSPATH}"
     export POST_CLASSPATH
fi
if [ "${WEBLOGIC_EXTENSION_DIRS}" != "" ] ; then
     JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.ext.dirs=${WEBLOGIC_EXTENSION_DIRS}"
     export JAVA_OPTIONS
fi
JAVA_OPTIONS="${JAVA_OPTIONS}"
export JAVA_OPTIONS
# SET THE CLASSPATH
CLASSPATH="${PRE_CLASSPATH}${CLASSPATHSEP}${WEBLOGIC_CLASSPATH}${CLASSPATHSEP}${POST_CLASSPATH}${CLASSPATHSEP}${WLP_POST_CLASSPATH}"
export CLASSPATH
JAVA_VM="${JAVA_VM} ${JAVA_DEBUG} ${JAVA_PROFILE}"
export JAVA_VM
Edited by: klogube on Oct 23, 2009 10:58 AM

CUA on dedicated client or not?

Similar Messages

Maybe you are looking for