CUA Roles residing in Child system are not showing in Central System

I just hooked up CUA today and have linked 8 child systems to the central system. The 8 child system users and roles have already been established in the child systems. Do I need to run program susr_zbv_get_receiver_profiles in each of the child systems to get the roles in the child systems to show up in the Central System for each user? I tried this in one child system and it worked.
Or is there something else I need to do without going into each child system?
I tried this program susr_zbv_get_receiver_profiles in the Central system but it did not work.

are you looking for roles or profiles? profiles will not show up in the central system. If you run SCUL do you see anything? when you first added the child system did you use an SAP user that had the proper permissions? In both the child and the parent? There are two roles that the user must belong to to add the child to the parent they are SAP_BC_USR_CUA_SETUP_CENTRAL and SAP_BC_USR_CUA_CENTRAL.
If you have any question about the permissions of these user at the time you added the child to the parent I'd delete the child and re-add with either the above roles or a user with SAP_ALL in BOTH the child and the parent systems

Similar Messages

Outbound IDocs are not visuible in Middleware system(SeeBeyond)

Hi Experts,
We need need your expertise help on this issue.
Issue:
The Outbound IDocs which are in status 12 in SAP system are not visuible in Middleware system(SeeBeyond) for customized message type( forecast -ZFOSHT)
If we create a IDoc by using customized program, IDoc(eg.0000000012345678) is successfully created and the status of IDoc is 12. but not visible in Seebeyond.
but If we are re sending the same IDoc(0000000012345678) through WE19(IDoc creation) without changing any thing,the newely created IDoc reached to the Seebeyond.
Please look the issue and help me on this.
Raghavendrarao.R
+91 9739006564

Hi,
After your Function module for IDoc creation either it is Z function module or standard one "MASTER_IDOC_DISTRIBUTE" write these
CALL FUNCTION 'DB_COMMIT'.
CALL FUNCTION 'DEQUEUE_ALL'.
COMMIT WORK.
This should solve your problem.

BW Roles are not updated in BOBJ system

Hi All,
We have created additional roles in BW system. But these roles are not updated in BOBJ system(BI 4.0). I am not able to see these roles in SAP Authentication when we update the user option too. Any solution for this?
Regards,
Krishna.K

Thanks for the reply victor,
Users are not yet assigned to these roles. But, it should display in the left hand side while importing?
So, Is this because of no users in these roles?
Regards,
Krishna.K

Could not access the central system - CUA problem

Hi all,
Please help me with this problem.
Its just a test scenario, when everything will be good here, i have to do the same for Production.
We just did upgrade our R3 system from 4.6 to ECC6.0.
I created CUA on DB1100 ( Dev BW 4.6 ) with two child systems 1) DC1150 ( Dev CRM 4.6)
2) DE1400 ( DEV ECC 6.0 ).
Now everything is working fine between DB1100 and DC1150..
It works like CUA ( DB1100) and child (DC1150) systems as it should be.
But connection between DB1100 and DE1400 is not working fine. When you go to SU01 in DE1400, it does not allow me to change anything. It means connection is there and DB1100 is taking DE1400 as child system but when i am updating any user information or roles in DB1100 it is not updating child system DE1400.
And when i went to tcode SCUA in DE1400 it gave me this error.
"Could not access the central system DB1100".
I dont know whats happening. I did same config in DE1400 as i did in DC1150. DC1150 is working fine but not DE1400.
The most weird thing is that DB1100 is thinking DE1400 as child system and i can not make any changes to DE1400 directly.
please help me with this. What i can do to make this working between DB1100 and DE1400??
i need to do the same in production if it gets passed.
Thanks in Advance.

Hi mala_swa,
seems that you have a problem with the rfc-connections....
Please check in both directions. The connection have to work without problems.
Check SCUL in DB1100 - what is the status of the distributed users? Errors, unconfirmed?
Check idocs in DE1400. Are there some? What is their status?
The most common error is coming from not working rfc-connections. That brings for instance problems while generationg partner profiles, etc. Also the strict naming convention (log. system name=system name in CUA landscape = name of used RFC-connections) has to be considered....
So that are some points, that you could check.
good luck,
Bernhard

CUA - Users not created in Central System

Hi - Just put in CUA into a Solution Manager 4.0 client - and have the following issue.
After performing SCUG - the users are brought into the central system BUT not created into the central system.
For example:
Child system is CLNT100
Parent system is CLNT200
In CUA - if I search on the user - I can see it exists in CLNT100, but no entry is created in CLNT200.
This is an issue as I can't use SU10 in CUA - to do mass changes as the users don't exist in this client.
I am pretty experienced with CUA - but have not seen this before - is there some new settitng that I need to make to create the users in the CUA client when performing SCUG?
Thanks

Hi - you only need to perform SCUG in the central system.
I have brought all the users accross from each child system.
I think I may have incorrectly analysed the error.
What I am trying to do is use SU10 in the Central system to make changes on users in the child systems. Issue is that none of the users that are in the child system only show up in SU10.
I therefore think that this is an issue with SU10 in CUA parent - as it is only picking up uses if they exist in this CUA parent client (i.e. not if they only exist in the child systems)
Is there any way to change the behaviour of SU10?

Transactional Iviews are not showing ( with out super admin role assigned )

Please any solutions for the fallowing.
First Problem
I am not able to create the user from portal directly. Its showing the fallowing error.
An error occurred in the persistence; contact your system administrator.
so i had created the users in WAS by SU01.
Second
We have some users at production server ( Assume 5 users ). and those users need to be mapped at portal. So that those users can directly enter into portal and operate on SAP system .
If u dont mine Please provide with me the steps to fallow
Third
i had created some transactional Iviews that are working fine when i am log in with Administrator( super administrator role). The problem is that the reports are not showing when i am log in with general user ( with out super administrator role ) .
Its showing the error
Could not able to look up the system.
And the problem with user mapping also .
For aministrator its working fine .and for a general end user ( created on WAS )
i am not able to provide user mapping. Its showing
There are no systems available for user mapping for the selected principal
wat could be the problem ?
Your solutions will be appreciated .please urgent

Hi Pratap,
Second Problem
If the Portal user name and R/3 user are the same then no problem other wise you have to do user mapping
Third Problem
Check the permissions. Right click the system object and give permissions for all
Create an alias for the system object for doing user mapping
First Problem
Try creating user from http://<portalserver>:50000/useradmin
Regards
Arun

SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

Hello,
SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
* Foundation Services
* HFM
* FDM
Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
While configuration,
1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
2) Also, I selected to configure Oracle HTTP server as web server.
Both these steps were successful.
But SharedServices and Workspace URL's are not working. Getting 404 error.
SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
Can anyone please suggest a solution for this.
####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
Thanks in advance.
Tej

Hi John,
today's update:
* Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
* During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
* Started EPM system.
* checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
* Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
     at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Can you please suggest how to overcome this error of Weblogic?
Thanks in advance,
Tej

File Systems are not shown in CCMS Monitoring

Hi Gurus,
We have installed all SAP components in Solaris 10 zones including Solution Manager.
Solaris File Systems are not shown in CCMS Monitoring under FileSystem. It looks like SAPOSCOL is not sending the OS data to CCMS. It does not show file systems in OS06 also.
The probles exists on Systems runnig in Solaris 10 zones only and NOT on systems running on individual Servers. [without Solaris zones]
Thanks,
Pj

Hi,
You need take some special considerations while installing SOLMAN on SOLARIS 10 zones. Check these notes
Note 870652 - Installation of SAP in a Solaris 10 zone
Note 724713 - parameter settings for Solaris 10
Hope this will solve your problem.
--Ragu

Child actions are not allowed to perform redirect actions. partial view

I'm using ASP .NET MVC 5
I'm trying to use Create view with the index view to show the created item in the same page. For that I'm using _CreateCategory as the partial view and I added following to the index view
{Html.RenderAction("Create", Model);}
My controller's get and post methods as follows for the Create
[HttpGet]
public ActionResult Create()
return PartialView("_CreateCategory",new Inventory.Models.Category());
[HttpPost]
[ValidateAntiForgeryToken]
public ActionResult Create([Bind(Include="Id,Description")] Category category)
if (ModelState.IsValid)
db.Categories.Add(category);
db.SaveChanges();
return RedirectToAction( "Index");
return PartialView(category);
}My index method as follows
public ActionResult Index()
return View(db.Categories.ToList());
I didn't do any changes to the partial view. I'm getting error "
child actions are not allowed to perform redirect action
. I tried many ways to overcome this. But no luck yet.

Please post ASP.NET questions in the ASP.NET forums:
http://forums.asp.net
The MVC forum is here: http://forums.asp.net/1146.aspx/1?MVC

In rz20 all file systems are not coming.

Hi all.
I have ccms configuration in local system not in central system menas every system there are own ccms configuration.
File system In rz20 that all file systems are not coming.
in os level there are like sapdata1,sapdata2.... & sapreorg but these file system are not coming in rz20.so we are not getting any alert regarding this file systems.
Kindly suggest how can i fetch all the file system which are available in os level.
thanks in advance.
Thanks & regards,
Laxmid

Hi Kumar,
Os -HP Unix
In *RZ0> SAP CCMS Monitor Templates>Filesystems--->* these below file systems are not coming.Otheres are coming.
/oracle/RXN/sapdata1
/oracle/RXN/sapdata2
/oracle/RXN/sapdata3
/oracle/RXN/sapdata4
/oracle/RXN/oraarch
/oracle/RXN/sapreorg
& please tell me there is one Lock & unlock is there in front of every node.what is this.
Thanks & Regards
Laxmi
Edited by: laxmid on Feb 7, 2010 9:04 PM

Changes in development system are not excluded

Anyone had this issue in CHARM before ?
we have SLFN - SDCR - SDMJ open for a change.
Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
Business now wants to stop this change and close SLFN.
How can I close/cancel SDMJ ?
When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
Is there a way to force close SDMJ ?
Thank you
Elena

>
Elena Ainoulina wrote:
> Anyone had this issue in CHARM before ?
>
> we have SLFN - SDCR - SDMJ open for a change.
> Development complete and almost tested - transport of copies is in QA, but original transport is not released from DEV.
> Business now wants to stop this change and close SLFN.
>
> How can I close/cancel SDMJ ?
> When I try to cancel it, I get the message "Changes in development system are not excluded" and status is not changed.
> Is there a way to force close SDMJ ?
>
> Thank you
> Elena
Elena, the system is giving you this message as a (cryptic) reminder that even though you want to close the SDMJ, you have made changes in DEV and QA that need to be reversed with another transport. Depending on your audit requirements, you may want to add these reversing entries on the same transport as a new task, or on an additional transport and send the whole thing through the normal processing. The other alternative is to execute CRM_SOCM_SERVICE_REPORT - just make sure you have reversed the changes already made to maintain the integrity of your landscape.

Standard business contents are not installed in BI system

I am new to SAP Basis Team, Consultants are saying that standard business contents are not installed in BI system. What package should I install or what is the steps I should Do. Following is the content of SAINT
FINBASIS -- 600             -- 0013   -- FINBASIS 600 : Add-On Installation
PI_BASIS -- 2006_1_700   -- 0006 -- Basis Plug-In (PI_BASIS) 2006_1_700
SAP_BW -- 700                -- 0017 -- SAP NetWeaver BI 7.0
SEM-BW   -- 600               -- 0013 -- SEM-BW 600 : Add-On Installation
ST-A/PI     -- 01K_BCO700 -- 0000 -- Servicetools for other App./Netweaver 04
ST-PI        -- 2005_1_700    -- 0006 -- SAP Solution Tools Plug-In

I'm not on a 7.x system ... but on my 3.x system, the component BI_CONT is for the business content data.
Brian

Effects are not showing in system

Hi,
In our system all the Budget related notes is there : 1361644, 1315776, 1359327, 1359268, 1369775, 1371380, 1372734.
Also I done all the changes in Tables: V_T7INI7, V_T7INI9, T596F, V_T7INT1, V_T7INT3
But effects are not showing.
Please tell me, after doing all these things, i have to maintain New TAX CODES related to that. After maintained that Tax Code, i will be able to see required changes (after define new tax codes).
Please clear..
Regards...

Hi,
Are the PDF files showing with the PDF icon or other icons in your local disk?
Please start Outlook in sate mode and test again. To do this, press Windows key + R to open the Run command, type
outlook /safe and press Enter.
In addition, you may also try to clean out the Temporary Outlook Files folder to check the result. See:
http://www.howto-outlook.com/faq/securetemp.htm
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

My imported CD albums are not showing in itunes

My music cds that were imported into iTunes are not showing in the music library

Hi apeyton,
Welcome to the Support Communities!
The information below may be able to answer your questions about how to find the music you imported to your computer. Is it possible that you have more than one iTunes library? Can you perform a general search for the song on your PC? The article below explains how to determine where the iTunes Music Library resides on your system and how to change the location if necessary.
Where are my iTunes files located?
http://support.apple.com/kb/HT1391
I hope this information helps ....
- Judy

Parameter values are not showing in in the Organization Parameter form

We have done a setup for an Inventory Organization.
Everything was working fine.
Values were showing everywhere.
We have lot of transactions done in the org also.
But suddenly yesterday when I was trying to open the Organization Parameter form for that specific organization, the form came up as blank and in the bottom the error is Query caused no records.
I have checked data is there in the base table mtl_parameters.
Value is coming for other organizations. Only one specific organization is having this issue.
Even in Examine, I have taken the last query run on that form and ran the same in back end database, I can see all values are there in the database.
But in frontend screen the values are not showing. even organization code also not showing.
Navigation is: Inv Super user --> Setup --> Organization --> Parameter

Have you checked Organization Access to ensure that no one restricted that org?
Or shipping grants and roles?
I think there are quite a few places that you can restrict access.

CUA Roles residing in Child system are not showing in Central System

Similar Messages

Maybe you are looking for