CUA - Users not created in Central System

Hi - Just put in CUA into a Solution Manager 4.0 client - and have the following issue.
After performing SCUG - the users are brought into the central system BUT not created into the central system.
For example:
Child system is CLNT100
Parent system is CLNT200
In CUA - if I search on the user - I can see it exists in CLNT100, but no entry is created in CLNT200.
This is an issue as I can't use SU10 in CUA - to do mass changes as the users don't exist in this client.
I am pretty experienced with CUA - but have not seen this before - is there some new settitng that I need to make to create the users in the CUA client when performing SCUG?
Thanks

Hi - you only need to perform SCUG in the central system.
I have brought all the users accross from each child system.
I think I may have incorrectly analysed the error.
What I am trying to do is use SU10 in the Central system to make changes on users in the child systems. Issue is that none of the users that are in the child system only show up in SU10.
I therefore think that this is an issue with SU10 in CUA parent - as it is only picking up uses if they exist in this CUA parent client (i.e. not if they only exist in the child systems)
Is there any way to change the behaviour of SU10?

Similar Messages

Could not access the central system - CUA problem

Hi all,
Please help me with this problem.
Its just a test scenario, when everything will be good here, i have to do the same for Production.
We just did upgrade our R3 system from 4.6 to ECC6.0.
I created CUA on DB1100 ( Dev BW 4.6 ) with two child systems 1) DC1150 ( Dev CRM 4.6)
2) DE1400 ( DEV ECC 6.0 ).
Now everything is working fine between DB1100 and DC1150..
It works like CUA ( DB1100) and child (DC1150) systems as it should be.
But connection between DB1100 and DE1400 is not working fine. When you go to SU01 in DE1400, it does not allow me to change anything. It means connection is there and DB1100 is taking DE1400 as child system but when i am updating any user information or roles in DB1100 it is not updating child system DE1400.
And when i went to tcode SCUA in DE1400 it gave me this error.
"Could not access the central system DB1100".
I dont know whats happening. I did same config in DE1400 as i did in DC1150. DC1150 is working fine but not DE1400.
The most weird thing is that DB1100 is thinking DE1400 as child system and i can not make any changes to DE1400 directly.
please help me with this. What i can do to make this working between DB1100 and DE1400??
i need to do the same in production if it gets passed.
Thanks in Advance.

Hi mala_swa,
seems that you have a problem with the rfc-connections....
Please check in both directions. The connection have to work without problems.
Check SCUL in DB1100 - what is the status of the distributed users? Errors, unconfirmed?
Check idocs in DE1400. Are there some? What is their status?
The most common error is coming from not working rfc-connections. That brings for instance problems while generationg partner profiles, etc. Also the strict naming convention (log. system name=system name in CUA landscape = name of used RFC-connections) has to be considered....
So that are some points, that you could check.
good luck,
Bernhard

Early watch alert task not created on satellite system via SDCCN

The task about EWA is not created on satellite system via SDCCN.
The RFC back was created on Solution Manager and the user assigned to it has the following profiles:
S_CUS_CMP (SAP_S_CUS_CMP) Read data
S_CMSREG (SAP_S_CSMREG) -> Central system repository data
S_BDLSM_READ (SAP_S_BDLSM_READ) -> SDCCN data
SAP_SV_FDB_NOTIF_BC_ADMIN -> Service Desk messages
SAP_SUPPDESK_CREATE -> Service Desk messages
I have checked the RFC authorizations and Connection nothing is wrong.
Do you folks have any clue about that issue?
tks,
Re

Hello,
Not really much information to go on. The Maintenance package tasks is intended to schedule the Refresh defintion and services SDCCN tasks. So is this tasks scheduled? Is this taks gettign any errors/warnings in the logs?
The EWA task is created when the refresh service task runs and gets a list of the serivce sessions that need to be
populated.
You can run a refresh services task to see if there are any sessions to pull. If ther are no sessions, it could be a problem in SMSY defintions for the system. if the system is not delared 100% correctly in SMSY you will not get an EWA session populated.
In DSWP in the SOlution is the EWA for the SID red flagged? If so this means the data still needs to be colelcted from the satellite/managed sysetm. Does the installation number of the SID match the one in SMSY? If not you willnot get any sessions.
Is the refresh session actually using the *BACK RFC to the intended Solution Manager ssystem and is it defined as the master in SDCCN RFC destinations?
If you go to SE37 and run TH_SERVER and specify the SM_SIDCLNTnnn_BACK RFC, does it pull the server list?
If so your back RFC is functioning properly and a logon is successful.
Are the service defintions being replaced successfully when the Maintenance Package runs? Are they replaced when an upgrade was done? It could be the service defintions need to be replaced.
But really more information is needed. I have covered off just some of the issues possible.
Regards,
Paul

** File to IDoc scenario - IDoc not created in target system

Hi friends,
We are doing File to IDoc scenario. We made required setting in both application as well as XI system. While test the scenario, the file is picked up and successfully processed in SXMB_MONI, but the inbound IDoc is not created in target system. What could be the problem?
We are using DEBMAS message type DEBMAS06 IDoc type. We checked the following.
1) SM59 - Connections are OK both application and XI system
2) IDX1 - In XI System, we have assigned SAP<R/3> port.
3) IDX2 - IDoc is imported.
4) In ID - Sender File - Business Service - Adapter-Specific Identifier - Logical System name is given.
5) In application system. - Partner Profile maintained correctly.
6) SM58 - There is no error.
So, what could be the reason ?
Kindly reply, friends,
Thanking you.
Kind Regards,
Jeg P.

Hi,
Check all the steps ..
File to IDOC
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Thanks,
Satya

Requisition object not created in eRecruiting system

Dear Experts,
Please help. My eRecruiting system in production is having error at the moment. When recruiter approve Requsition form created by Manager (via MSS), the requisition object is not created in eRecruiting system.
The step by step scenarion:
1. Manager create Requisition Form in MSS - using PDF form.
2. Recruiter receive the form in Universal Work List (UWL) in HR Portal
3. Recruiter approve the form
4. Requisition form should be updated in eRecrutiing system : eRecruiting -> Requisition -> Maintenance, However, the object is not created.
Your help is appreciated!.
-Rahidah-

I have the same problem but the requisition is created in HRP5125 in SAP but does not reflect to portal any help on this will be appreciated.
Thanks,
Sheshu

Users created in CUA does not distribute to child systems

Hi
I searched this forum and after pulling my hair for 2 days I am asking this question. I created a user in CUA and gave him child system access with the necessary roles.
I was under the impression that the user will get replicated / distributed automaticlaly to the child systems which i selected at the time of user creation in CUA
But it does not happen. I login the child system and search for the user. It says User does not exist. I saw SCUL in CUA and the log shows a grey icon next to the username and when I place my cursor on the icon, the tect comes " Distribution unconfirmed"
What am I missing? Everything looks ok to me
Why is the user or users not geting replicated or distributed to the child systems with the necessary roles / profiles?

>
Jackofalltrades wrote:
> 2. Also the communication user from Client to CUA is getting locked very frequently. When I do a text comparison from CUA, it always pops the username and password login screen and then I have to enter it and the text comparison happens. I don't know what that happens
>
> Any ideas for point 1 and 2 ?
Hi,
that is an indication, that the RFC-connection is not defined properly. As soon it does not work, you will get the login screen (on the login screen the default client (503) is filled automatically, but that has nothing to do with the problem you have).
First check the password of the RFC-user you use. Simply change this user to type 'dialog' and try to log on with the password you know. If that works, reenter this password in SM59. Perform the authorization test in SM59 afterwards. Mind possible upper/lowercase problems with the password depending on the releases your systems are.
You can also try to perform a remote login through sm59 to make sure, tath you can log on with that RFC-user (as long he is of type dailog this will work). If the rfc-user gets locked frequently, then something is wrong with the rfc configuration. In most cases the entered password is simply wrong.
Check this first!
b.rgds, Bernhard

GRC: User not created in backend (CUA client)

Hello expert,
We have GRC 10, SP13.
I have configured the connectors and setting for my CUA client.
I also configured my CUA client in SPRO.
I am able to select my CUA client in ARQ. When submitting, the request is approved.
Audit Log is showing:
Application log is showing:
But there is no user provisioned in my CUA client, not any IDOC or log in showing in my CUA master.
Did I missed something? Any advise is appriciated.
Regards Nguyen

Hi Ameet, thanks for your info.
1) Maintain CUA Settings. Did you maintain CUA system/client as the target client. --> Sorry, I am not sure what you mean? I have configured CUA for my backend and I can create a user via my CUA master, the CUA client is provisioned by sended IDOC from the master. Now I would like GRC provisioning the user to the CUA client instead of the CUA master.
2) Can you see all the child connectors under Maintian CUA settings. Check the tables: GRACCUADIST and GRACCUAMSTR --> yes, my configured CUA client is listed in table GRACCUADIST, table GRACCUAMSTR is empty as I don't want my GRC to use CUA as a global tool.
3) Have you installed CUA plug-ins in CUA system. --> My CUA client and master have the GRC Plugin.
4) Check for the FM: /GRCPI/GRIA_ASSIGN_OBJECT_NH --> FM exist in CUA client/ master and GRC. What is this FM good for?
Thanks for advise, regards Nguyen

CUA Roles residing in Child system are not showing in Central System

I just hooked up CUA today and have linked 8 child systems to the central system. The 8 child system users and roles have already been established in the child systems. Do I need to run program susr_zbv_get_receiver_profiles in each of the child systems to get the roles in the child systems to show up in the Central System for each user? I tried this in one child system and it worked.
Or is there something else I need to do without going into each child system?
I tried this program susr_zbv_get_receiver_profiles in the Central system but it did not work.

are you looking for roles or profiles? profiles will not show up in the central system. If you run SCUL do you see anything? when you first added the child system did you use an SAP user that had the proper permissions? In both the child and the parent? There are two roles that the user must belong to to add the child to the parent they are SAP_BC_USR_CUA_SETUP_CENTRAL and SAP_BC_USR_CUA_CENTRAL.
If you have any question about the permissions of these user at the time you added the child to the parent I'd delete the child and re-add with either the above roles or a user with SAP_ALL in BOTH the child and the parent systems

Role Creating in Central System CUA

Hi,
I am in the process of configuring CUA in my system.
Please let me know if it is possible to create roles in the Central System and push it to child system
Please advice

I think it will help for you
[http://help.sap.com/saphelp_nw04s/helpdata/en/b5/737c4177f1030de10000000a1550b0/content.htm]
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7c16d1f4-0901-0010-528b-f101f94cb09d]
Regards,
Raja. G

Remote system monitoring entry- data not relayed to Central system

Hello Folks,
I am trying to establish a central monitoring system for our client. I am trying to test it in the DEV environment first.
The central system is a Solution manager system (Dual stack- ABAPJAVA). I am trying to bring in monitoring data from the ECC development environment (ABAPJAVA).
First of, i created to RFC connections in Solution manager system, one for data collection and the other for analysis. I have maintained the host address of the ECC system as target.
Then i have created a remote system entry in Transaction RZ21--> technical infrastructure entered the 2 RFC names and have executed the function.
At this point i am only trying to bring in ABAP stack monitoring data form the ECC system so i have not generated the CSNCONF file.
Now when i look in Solution manager RZ20-->CCMS monitoring templates, i can't see any data for the the ECC system.
I guess i am doing something wrong. Am i looking in the wrong monitor set?
As additional information: Solution manager (SMD) and ECC (ECD) use different transport domains / transport groups. I dont know if this makes a difference.
Can some one please help.
Regards,
Prashant

Hi Prashant,
if I understand correctly your system shows only MTEs from R/3 Stack, not from the OS side, pls check your SAPOSCOL. Are the data in OS06 in your remote system correct and do you see the current data, refredhed all 10 seconds?
To check your environment, pls do the following:
in th efirst step check in RZ21 > in the Topology part the System Overview for your system connection to your back end system. Are the Read Destination Data RFC and the Destination Analysis RFC correct and works the authority chek fine?
In the second step pls check in RZ21 > in the Agents for Remotey SAP Systems part; are there registered your remote ccms agents correctly and works the connection test.
Stop the agents and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the read RFC destinations?
Start the agents and and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the CCMS Agent RFC destinations?
To rebuild the Monitor in the CEN system you could try to reset the node of your remote system in the warm up status > go in the remote system to RZ1 > go to local segments > change to edit > select your segments > reset segment in "WARMUP" status.
In the CEN system you coul try to go to the edit mode for the Agents for Remot SAP Systems > select your remote system and push the button Reinitialize Agents
In the back end system you can try to delete all MTEs in RZ21 > menu Technical Infrastructure > Reorgenize Segment Table > select the options with "ALL" in the CEN and the remote system to reorgenize all data.
Could you pls post for the missing MTEs a screenshot on the one side from the CEN system and on the other side from the remote system...
and last but not least you could try the following for missing OS MTEs
delete ALALERTS, ALMTTREE and ALPERFHI in /usr/sap/ccms/<SID>_<SNR> and check in the agents folder all trace and log files for errors.

How to create a central system on TDMS control system

Seems the central system on the TDMS control system is an alias.
Which transaction to create it?
Thanks!

Hi
Central system is not required to be created explicitly. Once you install the TDMS Add-on components the system can be used as a control as well as central. Only condition being that to use a system as a central system the server should be with basis release higher than 6.2.
Refer to TDMS installation guide for details.
Regards
Pankaj

CCMS alert monitoring data for ORACLE is not visible in Central system

Hello,
I have installed sapccm4x agents in the CI of the Satellite System and it shows in the Central System as sucessfully registered under Agents for remote System and the RFC Connection test is also successfull. When i check in RZ20 in Central System not all the predefined monitors are visible of the Satellite System in the Central System and mainly the MTE element ORACLE. The database,CI and other instances on the Satellite System are installed on separate hardware. As said the database is installed not with the CI but a standalone.
Please let us know what needs to be configured in order to get the MTE element of ORACLE to show in the Central System.
Thanks,
Vinod Meno

Bhudev,
Thanks for the quick respose..
1.Sapccmsr agent is installed on Java standalone server and it has been sucessfully registered and running and we can grep the process to see its state as well as in the Central System i can see under ccms agents for remote systems it shows and the RFC connection test is also sucessfull.
2.Yes we are sending the data from the DB to CI first,but we also want the data visible in the Central System mainly for the MTE element Oracle.The filesystem of the Satellite Systems shows up in the Central System but i am intrested to capture the MTE element Oracle since we plan to monitor the tablespaces threhold .
I am thinking of opening an SAP message but i am trying to see if i can get some info that can give me the result.
Regards,
Vinod Menon

OIM Database Connector User not created

I am using OIM 9.1.0.0 with connector pack 9.0.4.1. When I run trusted recon i see the new user appear in the recon manager, but the user is not created. When I open the event and click on Create User the user is created.
But before this the recon event shows data missing.
How can automate it ??

The GTC framework will generate the rule for you if you configure the matching only property. Please take another look at the docs.
Or you can follow PInk's suggestion and crate the rule manually.
Best regards
/M

Manual entries of TDS/TCS deduction not creating Challans in system

Hi All,
We are to pass the entries of TCS (tax collected at source) deduction from sales invoice through FI module. Since it is not possible to deduct the TCS from sales invoice automatically without SD module, we have decided to post the TCS deduction entries manually. But when we are posting these TCS entries manually system is not creating challans for these TCS entries.
Please guide me whether sustem will not create challans for manually decucted TDS / TCS entries?
Thanks in advance
Sonal

Hi,
tcs is not supported totally. u can deduct tcs from customer. for this in wht config setting u can activate wht for customer also from the path given below
SAP Customizing Implementation Guide > Financial Accounting (New) > Withholding Tax > Extended Withholding Tax > Company Code > Assign Withholding Tax Types to Company Codes
Warm Regards

RFC not created in receiver system

Hi,
FIile-rfc received in receiver system until yesterday.now the RFC not reaching to receiver system.They are no changes and no change in RFC structure.
all the ques are clear and RFC connectin to the receiver system is alo fine and CC monitoring is also green and in the audit log everything is sucessful.sxmb?moni messages are sucessful.
please let me know where i can check ...
Regards,
hyma

Did you see any logs in receiver RFC channel?
Check the receiver service for interface in moni- SOAP header-Main document.
Also check if any conditions are specified in receiver determination.

CUA - Users not created in Central System

Similar Messages

Maybe you are looking for