CUA with the SAP Enterprise Portal

Hi,
We have existing CUA on a system with SAP_BASIS     700.
This CUA do have various R/3 systems connected.
Now we are going for EP with SRM/MDM.
We have an ABAP system as backend system with SAP NetWeaver 2004s (SAP_BASIS     700, PI_BASIS     2005_1_700)
My question is, can I connect EP system to my existing CUA?
If yes, how to do this?
Regards,
DA

Hi Deepak,
I guess this document will help you.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a30ba7e3-0601-0010-80af-93f4c5a9b9f0
Regards
Rakesh

Similar Messages

  • What versions of the SAP Enterprise Portal support Java 5

    What versions of the SAP Enterprise Portal support Java 5? 
    Example:
    If we were to use Java 5 code for an iView what versions of the portal would it run in?
    I have reviewed the Product Availability Matrix (PAM) and this is not clear. All I can find are references to JAVA 4 when using EP 6.

    Hi Alejandro,
    Currently, the version of SAP NetWeaver that is J2SE 5.0 as well as Java EE 5 compatible is the [SAP NetWeaver Composition Environment (NW CE)|https://www.sdn.sap.com/irj/sdn/nw-ce]. It does not provide the "full" Portal capabilities, however it does come with a "Portal Lite" and supports Portal applications development scenarios.
    For more information:
    [Introduction to NW CE|http://help.sap.com/saphelp_nwce10/helpdata/en/45/ff9fc1d8986c06e10000000a1553f6/frameset.htm]
    [Developing Applications for the Portal|http://help.sap.com/saphelp_nwce10/helpdata/en/44/d4269651103ee1e10000000a114a6b/frameset.htm]
    HTH!
    -- Vladimir

  • Need help with the SAP Enterprise connector wizard at the NWDS

    Hello,
    I am trying to create new proxy using the SAP Enterprise connector at the Netweaver Developer Studio.
    The problem is that at the 2nd stage I am unable to connect to the server. Can someone please explain me in details:
    1. Which tab should I chose there: Load balancing server or single server?
    2. Which parameters should I enter there and from where can I take them (uch as System number...)
    I tried to enter my server's parameters but I couldn't connect.

    Hi Roy,
         It depends on what type of R/3 server you are connecting. Usually development & Quality assurance systems for R/3 are not load balanced. You can find it out from your Basis people that server you are connecting is load balanced.
    If it is not load balanced  then the select the single server and enter the following parameters.
    1. Host Name: Server Name (or ip address)
    2. System Number: (00)
    If it is load balanced then fill out all the information on load balancing tab.
    You only need to fill one of the tabs. thank you.

  • Integration of SAP enterprise portal with ATG dynamo platform

    This is more an architectural question.
    There is an existing web application running on the ATG 5.x/6.x B2C platform that takes orders from dealers for a retailer. It integrates with a SAP system using proprietary integration mechanisms. This is the existing architecture.
    There is a idea to use the SAP netweaver platform, specifically the SAP enterprise portal that will integrate with the ATG dynamo platform.
    ATG 6.2 and above allows integration in 2 ways :
    1) Use web services
    2) Integration framework using JMS/RPC etc
    [Pl. see the ATG documentation www.atg.com/support]
    I have been reading thru number of articles on SAP netweaver and looking for multiple options for the above integration.
    My theoretical understanding is:
    a) Develop a connector to the ATG platform using connector framework and invoke a web service on the ATG platform that expose the business logic built on the ATG platform
    b) Does SAP XI come into picture if the portal tries to create a business process out of one single application.
    c) Are there any other options?
    I'm completely new to the SAP netweaver platform but have a good idea on SOA.
    Any help or inputs on this will be highly appreciated.

    Hello,
    I can give you a suggestion from the Connector framework point of view. We are currently developing a generic webservice connector which will enable to create content using CF, which will be sent as WS requests for function execution. The connector is planned to be released for New-York 7.1 Netweaver branch. For the mean time I can suggest, as you did, to develop your CF connector which will connect to ATG exposed WS.
    Best Regards,
    Ran

  • Business Object, SAP BW and SAP Enterprise Portal

    Hello all,
    I've a few questions about the possibility for linking Business Object, SAP BW and the SAP Enterprise Portal.
    The Business Package MSS 1.41 give us a functionality to display (in a federated portal) personalized Budget and costs in an Overview Iview (kind of Welcome page).
    Those information are retrieved from SAP BW and I'd like to know if it's possible to retrieve those data (with the same functionality) from Business Object tool.
    Is it possible to have those personalized reports without having a direct link (standard architecture) between SAP BW and the federated portal?
    Thank you in advance fro your answers.
    Matthieu

    Hi,
    The procedure to replicate BW users in BO is explained in detail on the blog of Ingo Hilgefort:
    /people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
    Regards,
    Dave

  • SAP Enterprise Portal Strategy Documentation

    Hi,
    I would like to get a template document to design the SAP Enterprise portal strategy. Is there a document which lists the areas to be considered while designing the Enterprise portal strategy? Are there any best practices which SAP suggests in this area ?
    Regards,
    Amit

    Hi.
    You may find the following links useful for you:
    [Planning and Succeeding with Your SAP NetWeaver Portal Project|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/903122e0-b3d4-2b10-c5b3-c19f5dd58072]
    [Best Practices - Portal|http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/e0b46f8a-8fce-2b10-95a5-b72dd53a952b]
    Best regards,
    Aliaksandr

  • SAP Enterprise Portal - Post Installation Tasks

    Hello everyone,
    I am a beginner in the area of SAP Enterprise Portal. Please bear with me in case if I ask you stupid questions.
    "Our idea is to deploy the BIW 3.5 IVIEW over the portal"
    I have installed the SAP Enterprise Portal 6.0 SP6 on Windows 2000 server environment. I have followed the install guide and I have done the installation successfully. I am also able to logon to the portal server using the irl url http://sodium:5000/irj/portal as an Administrator.
    As a BASIS administrator point of view, what are the next Post Installation activities that I need to perform?
    (Our idea is to deploy the BIW 3.5 Iview over the portal)
    I really appreciate your responses.
    Thanks & regards,
    Nikee

    Hello Nikee,
    Simply define the SAP BW system, add an Alias, import portal certificate (for SSO), and start creating functional iview that can render your BW queries and reports.
    Create a System pointing to the BW server with the following details:
    a) System ID
    b) Client
    c) Web Access Point with "WAS" as category containing the following
    entries: -
    · Protocol
    · Hostname
    Note: Domain name of WAS should be same as portal domain
    After that create BW iviews
    QueryString is in the form "CMD=LDOC&infocube=myCube&query=myQuery"
    You should have WAS on the BW server and also IGS shall also be present.
    To follow with the latest, see note #489961 and
    http://help.sap.com/saphelp_nw04/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
    Hope this will help.
    Regards,
    AAAttar

  • Q: BOBJ reports in SAP Enterprise Portal?

    Hi,
    We want to be able to access Business Objects reports (Crystal Reports and WebIntelligence Reports) via the SAP Enterprise Portal. The integration between SAP BI and BOBJ is completed, and we can create WebI and CR reports based on our SAP queries, but we have not been able to understand how to publish the reports in the portal.
    Does anybody have any idea of how to publish these reports (for instance if it is possible to create a direct link to the report in InfoView)?
    Any help appreciated,
    Thank you in advance,
    Mikael

    Hi Mikael,
    this is the quick (URL iView) but not the recommended (BOBJ iView Template) way:
    1. Log on the BOBJ InfoView, locate your report and look at its properties. Write down its CUID.
    2. Go into the SAP Portal and create a new URL iView using following URL
    http://<name of bobj web server:port of boboj web server>/OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=<CUID of your report>
    Regards,
    Stratos
    NOTE: The openDocument URL works for BOBJ XI 3.x installations with Tomcat. Please look in the documentation about the syntax if you are using IIS.

  • Two sap enterprise portal in the same server

    Hi,
    We have installed a SAP Enterprise Portal on a linux server, all ok!!. but now we want to install another SAP Portal in the same server with the same ehp and same sp, but diferent url, is it possible? and we have something in mind when we began to install it..
    e.g. diferents ports or diferents database SID to avoid errors.
    thankssss

    Hi Carlos,
    SAP Software in general is flexible regarding this requirement.
    A SAP ID identifies the system, and the Instance ID is related to the Portnumbers that are used...
    So lets say you have an:
    - host called "linuxhost1" and
       - you installed a SAP system "AB1" and
          - the CI is 00 and SCS is 01
    then you can install multiple additional installations for example
    - host called "linuxhost1" and
       - you installed a SAP system "AB2" and
          - the CI is 02 and SCS is 03
    etc etc..
    As long as your host has enough resources you can fill it up...
    The instance numbers you chose are reflected in the portnumbers. So in my example above  the AB1 portal is called by http://linuxhost1:50000 and AB2 portal is called by http://linuxhost1:50200...
    So in other words the instance number of the CI is used in the portnumber of the java instance (5NN00).
    The above info is also spread among different SAP installation guides, and SAP help pages.
    Cheers,
    B

  • VERY URGENT: Issue with Reconciliation against SAP Enterprise Portal

    Hi,
    We are using IDM7.0 and we have SAP Enterprise Portal as a resource. The users in portal are from Active Directory.
    When I am doing full reconciliation against portal, it is processing only certain accounts. The reconcilaition policy is to link accounts. It is not linking teh accounts. Moreover, these accounts are not found in UNMATCHED accounts also. I don't have any account exclusion rules or something.
    I wrote a small code snippet, which does just a single account reconciliation of a particular user id. In this case the portal account is being reconciled and linked properly.
    Any ideas what the issue might be?
    And I have another question too.. in the schema attributes of the out-of-box SAP Portal resource adapter, I don't see any ammping entry for "accountId". Usually for other resource adapters there would be entry for accountId (e.g in AD, mapping is: accountId <---> sAMAccountName). In case of portal, do we need to explicitly set this mapping? If so what would be the right hand side name in the schema? Does the right hand side name changes from one deployment to the other? If so how to determine what attribute maps to accountId in our portal? Might this lack of accountId is causing the issue with the reconciliation?
    Any leads would be highly appreciated.
    Thanks,
    kIDMan.

    Thanks for the reply. I have already set up correlation rule, account linking options for different situations like FOUND, UNASSIGNED, UNMATACHED etc. If my linking configurtaion is not correct then the fetched accounts should be atleast in the account index with situation as UNMATCHED. But that is not the case.
    I am not sure if I made my problem difinition clear earlier. The problem I mentioned is not with "linking" of the accounts. The problem is IDM is detecting only some accounts. Among those set of accounts which IDM was able to fetch from portal during reconcilaition, it was able to successfully link the matching accounts to identities in IDM.
    My question is, why IDM is fetching only certain accounts and not all accounts from portal resource.
    As I mentioned earlier, when I run my code snippet to reconcile a single account, it reconciles successfully and links to user identity in IDM (if a matching idenity exists based on my correlation rule). But why the reconcilaition at the resource level is not able to fetch and reconcile teh same account.
    Regarding the accountId attribute in the attribute schema, neither the SUN documentation nor the resource adapter configuration tells about the name of the attribute on the portal side that it should match to.
    Thanks,
    kIDMan.

  • Changing the text "SAP Enterprise Portal 6.0" in the browser window title

    Hi,
    I want to change the standard browser window title from "SAP Enterprise Portal 6.0" to my clients company name.
    Has anyone done this before?
    Please help.
    Thanks in advance
    Padmamr

    Hi,
    To change the name of the browser:
    System Administration > System Configuration > Service Configuration > Portal Runtime > Central Configuration.
    Scroll down to: portal.html.head.title
    and change to required name of your company.
    Also, if you goto System Administration > System Configuration > UM Configuration > Direct Editing.
    Here you will find a host of UME controls for logging on and logging off the Portal. You can change images etc... from here.
    Remember to restart the Portal and components for changes to take affect.
    Cheers

  • TIME on ESS/MSS with the SAP Portal, release ERP2005 ECC6.

    Hello,
    I need to implement TIME (Leave request) on ESS/MSS with the SAP Portal, release ERP2005 ECC6.
    Any informations about the customizing for a proof of concept would be appreciated.
    All the back-end (R/3) as allready been customized.
    Thanks for your responses.
    Olivier

    Hello,
    If you already have all the templates and such configured then its easy. We don't have ESS and only one MSS scenario. However we support the web environment via BSP HAP_DOCUMENT. You can include our list pages in an Iview and assign that to the ESS or MSS scenario in the portal.
    They also run stand alone, so you can test it as well without configuring the portal.
    See also <a href="/people/sap.user72/blog/2007/02/20/objective-setting-appraisals-the-web-environment bloggy</a> on OSA and the web Environment, especially the last part will be of interest for you.
    Regards and Groetjes,
    Maurice

  • The latest SAP Enterprise Portal to download?

    Hello everyone,
    I would like to know where you can download the latest SAP Enterprise Portal, please let me download the address? Thanks！

    These two paths can not be downloaded,
    ftp://ftp.sap.com/pub/sdn/devkits/netweaver/java/NW04SneakPrevJavaSP11.part1.rar
    ftp://ftp.sap.com/pub/sdn/devkits/netweaver/java/NW04SneakPrevJavaSP11.part2.rar
    Please help me!

  • Configure SSO Connection from SAP Enterprise Portal to BOE Server

    Hi Guys,
    We recently installed a BOE Server and want to connect it to our SAP Enterprise Portal. What we need is just to display the Crystal Reports via Enterprise Portal. We have set up the following:
    SAP EP with AD Authentication
    SAP EP configured with SNC to SAP BI7 system
    SAP BOE XI 3.1 - SAP Integration Kit
    BOE Server configured with SAP Authentication via SAP BI7 System
    We've also set up BOE IK iviews and URL iviews pointing to existing reports in BOE. However, when we access it from EP, it prompts for a username and login to BOE. Is there a way to configure these so that there is no prompt for login to BOE server and SSO is used? Is it also possible to have a service account (e.g. domain/crystal) that will run the reports in BOE everytime a user accesses a report from SAP EP?
    Let me know if this is at all possible

    Hi,
    You should configure InfoView for SSO first, which required infoview.xml file modification, using windows AD default authentication. If you want to utilize the OpenDocument URL for iView then you also need to configure OpenDocument.xml file for SSO also. The SAP portal must have trust relation with the SAP BW server so the Windows AD token can be authenticate with SAP BW server.
    If you want crystal user to run all the report then you will lose data security. It can be done by hard coding user name and password in the report properties and database logon but the SSO capability can be accomplished only by windows AD, SAP or LDAP.
    For more details check BOXI Admin guide and SAP Integration Guide.
    Thanks,
    Muhammad

  • Performance issue of BI reports in SAP Enterprise portal

    Dear Friends,
    We have  integrated BI reports with SAP Enterprise portal 7.0.Reports are running properly But the issue is reports are taking more time to dispsaly its content and leading it to  performance effect.
    In Bex ( BI side) reports  performance is little better than  SAP EP platform. BI Team also looking for ways to improve performance  at BI side.
    Could you please share your valuable ideas to improve  the performance at SAP EP side also ..
    Thanks and Regards
    Ratnakar Reddy

    Hi ratnakar,
    The first step is to identify which component is causing the performance problem. Run your report in the portal but try appending the string &PROFILING=X in the end of the URL. This will generate BI statistics which you can use to see which component (Java stack, ABAP stack, Database) is causing the performance issue.
    Hope this helps.

Maybe you are looking for