CUAC 9.1 Premium Edition Upgrade to version 10.5

I have some questions regarding an upgrade that I'll be doing for a customer. The customer will be upgrading their full UC Suite from 9.1.2 to 10.5. The customer has CUCM, CUPS, Unity Connection and CUAC Premium.
I'm planning on upgrading CUAC first but I have some questions:
1. Is CUAC 10.5 a supported installation on Windows Server 2008 32-bit?
2. Is CUAC 10.5 installed on Windows Server 2008 32-bit compatible/supported with CUCM 8.6?
3. Is CUAC 10.5 installed on Windows Server 2008 32-bit compatible/supported with CUCM 10.5?
4. Which Operating Systems is the CUAC Premium Client supported on?
I've looked through the CUAC Installation & Uprade Guides, but they're seems a bit unclear.
While ordering the UC 10.5 upgrades for the customer with PUT, CUAC was not an orderable product in PUT (CUCM & CUC were) - does this imply that the customer isn't entitled to the CUAC Upgrade, or is the process for ordering CUAC upgrades different? Is CUAC typically covered by the same UCSS/ESW as the other items in the UC 10.5 product suite?
Any guidance is greatly appreciated.

Hi ,
If u refer the datasheet of Advanced Atendant Console version 10.5.2, it says it is compatibile from CUCM version 7.1(5) to CUCM 10.5(2).
From Table 2 , you can get the system requirements but is supported
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-attendant-console/data_sheet_C78-731867.html
● Windows Server 2008 R1 (32-bit)
● Windows Server 2008 R2 (64-bit)
● Windows Server 2012 (64-bit)
● Windows Server 2012 R2 (64-bit)
From Table 3, u can get client system requirements
Microsoft Windows 8.1
● Microsoft Windows 8, Windows 8 Pro, or Windows 8 Enterprise
● Microsoft Windows 7
● Microsoft Windows Vista Professional with SP2
regds,
aman

Similar Messages

Upgrading Illustrator CS3 to CS4 Premium Suite Upgrade

Hi Guys,
A company I maintain the Computer systems for has got Illustrator CS3 Volume Licensing Version as they bought 5 copies for their graphics design company.
And the went out and bought Adobe CS4 Design Premium Suite Upgrade Retail Version. They have just bought a new computer and went to install CS4 Design Premium Suite Upgrade without any other software installed and it comes up asking for the serial number of the Illustrator CS3 and they enter the key and it comes up invaild key.
Do I need to install Illustrator CS3 on the computer then upgrade to CS4 Design Premium Suite Upgrade.
Thanks
Matthew

AFAIK, you can't upgrade a volume license to a individual license.
You'll need to call Adobe to straighten this out.
Bob

Which Oracle version can i install on Windows 7 home premium edition?

Hi,
Can anyone please let me know Which Oracle version can i install on Windows 7 64 bit home premium edition?
Thanks in Advance,
Arun Kumar.
Edited by: 884258 on Sep 9, 2011 6:21 AM

Oracle database compatible for windows 7
Already asked and answered in these forums - pl use the search feature
HTH
Srini

CS5.5 Premium Edition - Mavericks or Yosemite?

Re: Creative Suite CS5.5 Design Premium (Students and Teachers Edition).
So after waiting for a while before considering to update to Yosemite and reading many forum posts here and other forums on the web saying how easy it was to update with no problems and everything works as it should be, just update the Java etc, along with the heart ache and posts saying don’t upgrade, programmes not working, CS5.5 is now longer supported and people saying that they are reverting back to Mavericks and advice saying look on Roaring Apps to see compatibility issues, which to be honest is inconclusive at the moment.
Among those people who are still using the CS5.5 Premium Edition Creative Suite and individual programmes, what is the general opinion, is it now safe to upgrade to Yosemite or is it better to stay with Mavericks?
I could do with adding a Poll here to get some kind of insight on what forum members recommend.
Look forward to your replies.

This is addressed to anyone who wants to help. (Hi Bob, you seem to be on this forum a lot.)
Here's my sad story:
I bought the Creative Suite 5 Design Premium Teacher/Student version last year from a guy with a good sales reputation stats on EBay. He wrote that he's a trainer for the Navy and when he tried to register it, found out that his service to his country as a teacher-trainer didn't qualify him for the discounted version.
I bought it and when I started back in school last week, I got a message from Identit-e that it was already registered.
Trying to give the seller the benefit of the doubt, I wrote Identit-e back and asked if the registration was successful or whether it was aborted because the guy found out he's not eligible.
They wrote me back and said that his registration was rejected because he was ineligible. AND, that the software has been registered and I can't register it. --Say what?!
I called them on their logic and they wrote back they won't respond anymore. Case closed.
So, being as Adobe told me the other night I'd have to take the issue up with Identit-e, and Identit-e has responded how it has -- I seem to be screwed here. I don't have money to blow like this -- I'm unemployed and trying to retrain myself and get employed again by going back to community college.
I'd like to keep a high opinion of Adobe and that it does have some caring customer service in addition to great products.
WHY would they associate themselves with such a shameful, loser verification company??
Can anyone out there help me?! ADOBE?!?
Thank you.
Veronica

FB4 Premium Edu. upgrade-confusion

After discussing with several licensing resellers and the Adobe licensing support itself I'm even more confused than before, you guys at Adobe definately don't make it easy upgrading or even buying an education version of FB4 Premium
What I currently have
- Flex Builder 2 Pro. edu license
- Free Flex Builder 3 Pro edu license from freeriatools.adobe.com
- Extended FB 4 Premium Beta 2 Key
What I would like to have
- Flash Builder 4 Premium education
Education Volume Licensing Reseller
Ok, our education volume licensing reseller was completely confused about the name change, however they offer three products:
- FB4 Premium Upgrade from CF-Builder
- FB4 Premium from Flex Builder 2 / 3 Professional ( unbelievable cheap price of USD 40.- )
- FB4 Premium from FB4 Standard
However I have never heard of an upgrade option from Flex Builder 2 to Flash Builder 4 Premium and they were not able telling me if the freeriatools-key will work for an upgrade.
Also they were not able telling me if I can get the Free FB4 Standard for education version and then upgrade to FB4 Premium education and there don't seems to be an option buying the FB4 Premium edition directly, they just offer upgrade versions.
So they told me I will have to give the Adobe licensing center a call.
Adobe Licensing Center
Again, first of all a confusion about the name-change. However after several internal discussions I had to pass them my Flex Builder 3 key and they told me it should be possible upgrading to FB 4 Premium using this key....should..so they redirected me to the Adobe direct-selling hotline.
Adobe Direct-Selling Hotline
"Flash Professional?"...no Flash Builder 4 Premium from Flex Builder 3 Professional but using a freeriatools key.
.."please wait"....
..."we only have a business version, would you like to buy this one?" No thanks, I would like to buy the Flash Builder 4 Premium education version.
"ah ok, then please contact your educational volume licensing partner". ...But they told me to contact you because they don't have such an option, just upgrades.
.."sorry we can't help you in this case" mkey thanks.
..as they have no idea what Flash Builder 4 is as it seems, I decided to ask within this forums, maybe someone else already upgraded his/her FB3 edu pro version to FB4 Premium....or at least I hope so
Ok seriousely:
Is it possible upgrading my Flex 3 edu pro (freeria) or Flex 2 pro license to FB4 Premium?
Is it possible getting the Flash Builder 4 Standard edu from freeriatools for free and then upgrading it to FB4 edu Premium through our local volume licensing partner?
Thanks in advance for your answers
--Michael

Hoping to get an answer to this question as well - I work at a university and have been using Flex 3 with a key from freeriatools on a daily basis for programming everything (Flash, PHP, HMTL, Javascript, XML, etc etc etc) seems like. I received my freeriatools key for Flash Builder 4 only to find out it was for the Standard edition, not allowing use of the memory profiling for Flash - making me wonder what else will be disabled when I go to build stuff - not sure why this was done as it wasn't disabled in Flex 3 for edu. As the decider for my team if we are going to move to FB4 I'm staying Flex 3 until the vendors and adobe figure out what they are going to do for educational versions of FB4.

Western Digital My Book Premium Edition - Firewire not Working

Hey there everyone, I thought I would write about my Western Digital My Book experience for two reasons:
1. To see if anyone had any success getting the firewire option to work properly on their Intel based iMac.
2. To deter anyone else from buying this drive if you plan on using firewire.
When I bought the 320GB My Book Premium Edition from Best Buy I thought I had a great product.... why? Because the backup software included was easy to use and manage. I scheduled my first backup in a matter of minutes. As time went on I realized that this thing was just not going to play nice.
After failing to get the Firewire connection to work I decided to contact WD's customer support department to see what they could do.
My first call the Customer Support rep. ended with him saying that there was a known issue with the firewire cables that shipped with the product.
"We'll get one out to you in about 3 - 5 business days."
Well, 10 business days later the cable finally showed up. Plugged it in and I got the same result:
My iMac will simply not recognize the drive when using the firewire option. USB works fine EVERY time but for some weird reason it just will not mount with the firewire.
So, I called WD and they stated that the bad cable that was shipped with my drive more than likely ruined the firewire connections on the drive. So they take down my credit card information and ship me a new drive with RMA instructions.
A week later I get the new drive. Plug it in and guess what, same issue, different drive.
So I called WD support again and they say that the drive they sent me must be defective. Ok, I've almost had enough at this point. I tell the guy on the phone that this new drive they are sending me had better work or all three of these drives will be going back to where they came from.
So here is my suggestion - do not use the 320GB My Book Premium Edition if you plan on using firewire. I'm not sure exactly what the problem is here so I cannot say that this will happen on other systems that do not mirror mine. But be leary.
My brother came over the other day grabbed my so-called bad firewire and plugged in his external drive and it worked flawlessly. Bummer for me.
*A side note:* There is a firmware upgrade on the WD site (Version 1.08a) that is supposed to resolve issues with the firewire unique indentifier. I tried it on both drives and that didn't work either.

You and me both, unfortunately. I'm on my third WD My Book (although I have the 500GB version) and something like my sixth firewire cable. I called their support line last time and the support guy seemed extremely confident that a new firewire cable "will definitely fix my problem", but I'm highly skeptical of it.
Same story though- USB works without a hitch, but both Firewire 400 and Firewire 800 don't work. Drives don't show up in Disk Utility or Terminal with any Firewire connection. I've gone through 5-10 hours of Apple phone support to no avail.
The weird thing is that the drive doesn't work on my Rev A. MacBook either. Also, I can't use target disk mode over Firewire between my new 20" iMac and my MacBook (which was previously not a problem with my G5 iMac). At this point I'm getting worried that the original cable fried one or both of my Firewire ports on my iMac and/or my MacBook, although I haven't had the time or devices to test that theory yet. I'm not sure what the prospects of getting a refund for my My Book will be (since it's 6-8 months old since it was working on my G5 iMac for awhile), but it might have to come down to that eventually.

I have a 4th gen ipod nano which will not sync after restore. i have run itunes diagnostics and attached thMicrosoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)e results. can you help please?

Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Sony Corporation VGN-NS20E_P
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ACE4032C3EC8
Current user is not an administrator.
The current local date and time is 2012-05-26 22:17:26.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {78DA402D-66EE-4084-9D5E-8A010E0B8437}
Description: Atheros AR928x Wireless Network Adapter
IP Address: 192.168.2.8
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DHCP Enabled: Yes
DHCP Server: 192.168.2.1
Lease Obtained: Sat May 26 19:10:42 2012
Lease Expires: Sat May 26 19:10:41 2012
DNS Servers: 192.168.2.1
Adapter Name: {C1458549-CA0B-4A3B-8F8E-9259653AA0DD}
Description: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-26 20:57:29.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Connected Device Information:
JULES'S IPO, iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: YM839W553QU
Bus Speed: 61440
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 5.0.1
Serial Number: DNWH3R84DTD2
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

I upgraded to version 9 from version 8. The following items do not work properly - menu, home page, navigation bar, wheel click. I backed up to version 8, and none of this stuff works right. How do I fix this?

When I open Firefox, the bookmark menu is a little tab in the upper left corner. If I go to view and un-click bookmark menu and then view, click it, the standard menu bar shows up. The Back and Forward buttons don't work. The navigation window does not show the URL of the current page. When opening, the home page does not come up. The wheel click works on the bookmark bar, but not within a page. The menu (file, edit, etc) does not work after the first page. Version 8 worked well. When I upgraded to version 9, all this trouble started. I backed up to version 8, but the problem persists.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox

Issue while Upgrading to SQL 2014 from 2012. " The specified Edition upgrade is not supported."

Hello Team
I am seeing this issue while I am trying to do an in-place upgrade from SQL Server 2012 to SQL 2014. Both being Enterprise Editions I am still seeing the below error message in the Feature Upgrade checks.
" The specified Edition upgrade is not supported"
Please let me know if anyone else has faced this issue and any workarounds? I am not doing "Edition Upgrade", just wanted to upgrade same edition of 2012 to 2014.
SQL Server details that is being upgrade:
Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64)
May 22 2013 17:10:44
Copyright (c) Microsoft Corporation
Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
thanks

Hi Shanky_621
Thanks for the reply. Yes I was told that it is SQL 2014 Enterprise Edition. Is there a way to verify that? Also yes I did not select the free Evaluation or Express Editions.
Just run the setup you got for SQL server 2014 and you would reach to page where it would say enterprise or standard after that cancel the setup . Actually version number can be found from Mediainfo located in same folder where setup.exe is located but edition
cannot be found by that way.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

How to upgrade SAPCAR version?

Hi gurus,
I am trying to apply support packages using SPAM. But whenever i am
trying to upload the Support Packages through frontend i am getting
following error:
"CAR error message: SAPCAR: can not change date
for /usr/sap/trans/EPS/in/CSR0120031469_0034275.ATT"
I down;loaded again the support package but still getting the same
error.
I tried to uncar the same in the application server but i still got the
error while doing SAPCAR -xvf.
I have got a solution to upgrade the version of SAPCAR. but i dont know how to do it?
how to upgrade the version OF SAPCAR.
Thanks & Regards,
Priya

Hi Priya..
You don't need downtime to change permissions...
You can run "/sapmnt/IRQ/exe/saproot.sh" script as ROOT user to set the permissions on Kernel Directory.
OR
Do as follow:
# chown -R irqadm:sapsys /sapmnt/IRQ/exe
# chmod -R 755 irqadm:sapsys /sapmnt/IRQ/exe
# chmod 4755 /sapmnt/IRQ/exe/saposcol
# chown root:sapsys /sapmnt/IRQ/exe/saposcol
After that don't forget to set the permissions of BRTools (brbackup, brrestore, brarchive, brspace etc.) according to below note.
[113747 - Permissions for DBA tools BRTools and SAPDBA.pdf|https://service.sap.com/sap/support/notes/113747]
Regards.
Rajesh Narkhede
Edited by: Rajesh Narkhede on May 14, 2010 3:51 PM

How to upgrade old version of MacPro 1.1 with Lion 10.7.5 to Mountain Lion? There is some way by inserting 64 bit instead od 32bits. Reply to Stefan Erix

How to upgrade old version of MacPro 1.1 with Lion 10.7.5 to Mountain Lion? There is some way by inserting 64 bit instead od 32bits. Reply how to do it to Stefan Erix, Uppsala, Sweden
<Email Edited by Host>

If you are a developer, or have a similar personality, there is an aftermarket EFI-64 "work-alike" program you can load into memory instead of 64-bit firmware. It is too complicated for regular folks.
You must already have upgraded your Memory and your graphics card to use this solution, and your Mac will not operate quite normally. Any problems with it are unsupported.

Adobe Creative Suite CS3 Design Premium Student Upgrade?

I bought a student edition of CS3 Design Premium.
After purchasing it I found that I only use the Photoshop part of the Suite.
Am I able to upgrade the Photoshop portion, upgrade the complete Suite or do I have to purchase a new student copy of CS5 Photoshop.
Thanks in advance.

Bob -- I appreciate your bad news
Looks like I'll qualify for a teachers copy of CS5 -- I guess I'll pick one of those up.
I had a quick glance at your article & am sure that both I & my children (students) will find it of use.
Best to you & thanks again.
jim
Date: Tue, 4 May 2010 06:55:26 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Creative Suite CS3 Design Premium Student Upgrade?
First things first...there are no student upgrades. If you're still eligible you can buy the software at student prices.
In the case of actual upgrades, no, you can't upgrade an individual sutie component.
I have an article on my web site that might be of interest to you: http://www.theindesignguy.com/purchase-advice.shtml
Bob
>

Do I HAVE to upgrade to version 3 to see my Canon 60d RAW files?

I have the student edition of Lightroom 2 and have loved it for my Canon Rebel. I recently upgraded to a Canon 60d and am unable to access my raw files.
I really do not have the extra cash to shell out for an upgrade to version 3 at this point. Is there any other way for me to use and edit my raw files?
Thank you!

Support for the Canon 60D was introduced with ACR 6.2 (LR3.2. The work around would be to use the Latest DNG Converter to convert the raw files from your camera to DNG files. Then import the DNG files into Lightroom 2. and you will be fine. When you do the conversion its a good practice to retain the original raw files for use with your camera manufactures software, which will not work with the DNG copies. Also if you have not done so you should update your version 2 to the latest 2.7.
The link for the DNG converter is here.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4807

"You can't upgrade this version of Mac OS X"

I have a 3 week old MacBook Pro 2.66 (4GB RAM) bought online with the Leopard 10.5.8 Operating System installed. I've tried to install Snow Leopard tonight and it gives me the message "You can't upgrade this version of Mac OS X." How can that be? I've tried the REPAIR DISK option and it says that my internal HDD is OK - in green. Yet I am unable to install the new OS. What gives?
Message was edited by: Jeff Little

Jeff,
It is possible that you are "stuck in the middle." The build of Snow Leopard resident on the DVD may actually have been "solidified" prior to the build that came with your Mac. As a result, the Snow Leopard installer doesn't "recognize" what is currently running on your Mac. Put another way, it doesn't know how to go about upgrading that installation. Yours is the first case of this that I have seen, if that is indeed what is going on here.
Regardless of the cause, you do not have to "upgrade." You can simply erase what's currently on your Mac and install Snow Leopard. You'll want to have a good Time Machine backup first, of course, and I recommend you find a suitable external drive to do so, if you haven't already.
When you do have that backup, you can boot to the Snow Leopard installer, open Disk Utility to erase the internal hard drive, install Snow Leopard, then use the "Migration Assistant" to bring your user data and account(s) back into the new installation. You probably have not had much time to accumulate a bunch of third-party apps, so having to reinstall those should be no problem. Even if you have found some that you like, keep in mind that all of our user data and settings for those apps will already be back in place, along with your HOME folder(s).
If you need further instructions to complete any of the steps I have outlined, we'll be glad to help.
Scott

Upgrade CUEAC version 9 to Attendant Console Advanced 10

Hi
I am running CUEAC 9.1 with CUCM version 9.1. My customer wants to upgrade the attendant console to version 10 advanced, but keep CUCM at version 9. I see this is supported from the attendant console documentation I have read. I believe version 10 is a serverless offering. Is there the option to go version 10 on my current windows 2008 server(this is where version 9 is running) or does it have to be serverless. Is it possible to introduce high availability if I upgrade to version 10 advanced? I am finding it hard to find definitive documentation for this.
Thanks,
Derek

[+5] to Jaime.
High Availability is supported in Advanced version .You can refer datasheet
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-attendant-console/data_sheet_C78-731867.html
further, as mentioned by Jaime, you can refer release notes of Advanced and Standard version for Compatibility with Call manager & OS requirements .Advanced version is supported on VMWare.
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/cuaca/10_5_1/release_notes/CUACA1051RN.pdf
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/cuacs/10_5_1/release_notes/CUACS10511543RN.pdf
http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_Unified_Attendant_Consoles
regds,
aman

CUAC 9.1 Premium Edition Upgrade to version 10.5

Similar Messages

Maybe you are looking for