CUBE - Are different pay as you grow license types stackable?

Hi.
I'd like to know if Redundant licences are stackable with single use licenses. Perhaps someone could kindly assist.
Do I need to buy enough RED licenses for the total session count, thus wasting the bundled licenses that are supplied with the device. Or should I take the bundled licenses into account when ordering RED the licenses?
Eg. for total sessions = 100 on a router pair supplied with 25 licenses each, I order 1 x FL-CUBEE-100-RED or 3 x FL-CUBEE-25-RED.
Thanks in advance.

You would add them up... that's how you'd get anything in between 50 and 100 sessions for example.
FYI they're honor based as well, so there's no technical/licensing portal hoops to jump through.
Aaron

Similar Messages

Lightroom has crashed with error message 'error reading from its preview cache' - this happens every time i try a launch it. I have looked a forum to repair the fault. there are different recommedations.can you tell me step by step how to recify this pro

lightroom has crashed with error message 'error reading from its preview cache' - this happens every time i try a launch it. I have looked a forum to repair the fault. there are different recommedations.can you tell me step by step how to recify this problem. i can not find ircat ir data etc in the programme files. Thanks

robmac76 wrote:
can you tell me step by step how to recify this problem.
Yes:
Step 1: Delete the preview cache.
That's it!
So, the trick is to find the preview cache.
This document gives location:
http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
To be clear: it's a folder in with your catalog and you want to delete the whole folder but nothing else.
If your catalog file path is "X:\My Catalogs\My Catalog.lrcat", then the preview cache "folder" will be:
X:\My Catalogs\My Catalog Previews.lrdata
So the trick is to find your catalog file, and since Lr won't open your catalog and run, you can't use it to find out.
But you should be able to find it by searching your disks for *.lrcat files - do you know how to do that?
Which OS?
If you know the name of the catalog it will help, but also: it's probably NOT in with your program files.
UPDATE: The above-mentioned document gives default name and location for preview cache, so if you haven't overridden the default, it should be right where that document said it would be - is it? (of course you need to know your user name too, but presumably you do, no?).
R

Load several cubes are different

Hi
I have a problem with loads.
I have a DSO, it has 15 millon records, and i am trying to load the data to 2 different cubes, filtering by period range (ie. 1 to 3), and both load extract different quantity of records.
For example, the extraction from 001.2007 to 003.2007 is
DSO->Cube1 = 756128 records
DSO->Cube2 = 12464 records
As you can see the quantity or records taken are very different. The loads are full and the extraction is from Active table (without archive),
If I see the active table of DSO, with the filter it is 756128, as the records taken in the load of the Cube1.
But what is it happening with the load of Cube2?
The Start routines are not configured.
The system is version 7 with support package 5.
Regards, Fede

Because of the Key differences from Cube 1 to cube 2, there might be less number of records.
Take the keys and put it in the DSO and see how many records you are getting with that time period
Thanks
Kalyan

Is it true that iPhone to iPhone texts are free, even if you are texting between different countries?

is it true that iPhone to iPhone texts are free, even if you are texting between different countries?

is it true that iPhone to iPhone texts are free, even if you are texting between different countries?

Cell phone pay as you go - need advice

Yikes... my head is spinning...I have seen so many phones the past few days ( and reviews etc ) on internet sites... I am totally lost.
had a cell phone years ago when motorola made them first.. traxar or something ?? was expensive ( $800 ? ).. and had monthly ATT service unlimited ( also expensive ).
that was during 1st season of " sopranos ".. long time ago.
since then I've just had a land line...with fios... internet and tv included.
now I need a cell phone again due to move to MN from NY. I have no clue how long it will take to get internet out there etc... in new apartment.
my computers will get set up right away when I get there..and one has a wi fi card installed ...so if I can find wi fi thats not passwrd protected .... I could maybe use it ...for internet. BUT ( this is a big BUT ) some stuff I do ( banking etc ) on internet is security sensitive to ME.... and I dont want to get virus through some network or have my security breached.
SOOOOO ... question is... can I get a pay as you go phone that also has features for basic email ( in and out ) and also a browser like firefox so I can do banking etc ???
ORRRRR should I just get a simple phone with no other services.... and then use whatever I can find in MN until I get my stuff hooked up....( like library computer or something ).
I am so confused by all the choices and different model phones etc... my head is spinning !!!

Chuck,
============
Will you be working in the TV/film industry in Minnesota?
=============
I dont think so. My first reaction to this question was : I would rather have a sharp stick in my eye.
But giving it more thought, I realize unless I find some staff position with a producer where I actually add value to the enterprise I would rather not work freelance ( per diem ) anymore. I need more than that now, but also less. I need less " money" but I need more re: my contribution.. even if it's simply helping others do what they want.
I have a feeling MN is not going to be full of opportunities to do that in the film and tv biz ( or tv commercials, industrials etc ) whether on shoot crews, construction, rigging, production, editing, sound, etc. It may be that fishing is the main activity out there... as there are a lot of lakes where I'm going. They must have fish in them ? It's weird but somehow " fishes " seems to be beckoning me to some new life out of the city etc. First it was trout. Now its trout again... plus even MORE fish types... who knows.. I have no clue about fish.
For example, what do fish actually DO ? They are doing stuff under water and its hard to see them and what they actually DO all day long etc. To me its a mystery.
Anyway, I am now having internet, phone and TV service installed at new apartment before I get there...made the arrangements this morning.... and the need for a cell phone etc has been greatly reduced... I might not get anything at all now for the actual " drive " out there.
Will see what my money situation is in next week or so... might get cell phone but not the internet and email stuff just for the drive. Every penny counts when moving and leaving the biz you've done for the last 30 plus years etc.
Rod

Can i still use pay as you go plan on a smartphone prepaid plan?

can i still use pay as you go plan on a smartphone prepaid plan?

Yes you can. However, 4G smartphones cannot be activated on prepaid. 3G devices have 3 different available plans. Verizon has an exclusive plan with Walmart which consists of unlimited talk and text with a 1GB for $50. The other 2 plans are unlimited talk and text with 2GB for $60 or 4GB for $70

Material number are same but attribute of materials are different.

What if we have two system connected with APO with similar material numbers but in fact different material in description.
I mean, numbers are same but attribute of materials are different.
How to address it in APO.....?
Regards

HI,
An SCM system (APO) can be integrated with multiple ECC systems (logical
systems). It may therefore be the case that the number assignment for certain
master data objects, for example, material masters, is not the same in all these
logical systems. In the example above, material number A in logical systems 1
and 2 signifies the same cube, whereas the same material number in logical system
3 (perhaps a subsequently purchased plant) is a cylinder.
If logical systems 1, 2 and 3 are planned with the same SCM System, the problem
arises that the system cannot simply transfer the ECC material numbers into APO,
as they may be ambiguous.
To guarantee that the naming of master data in distributed system landscapes is
unique, business system groups are defined in APO as areas of the same naming
convention. A Business System Group (BSG) groups different physical systems to
form a higher-level logical unit.
If, for example, two logical systems (LS1 and LS3) exist in a system landscape in
which you want to integrate APO and contain different materials with the same
name (Material A is a cube in LS1, but a cylinder in LS2), this conflict must
be resolved for integration in APO. First of all, both logical systems are to be
assigned to different business system groups (BSG1 and BSG2).
check and revert back , Hope it will help you.
Regards
Ritesh

I have an excess balance on my verizon pay as you go plan. If I cancel my plan, what happens to my remaining balance?

I was looking at switching to a 2yr contract with Verizon instead of my pay as you go. I went into the local corporate store and was told that my balance would not carry over if I switched because my number was ported from a different company and their computer program specifically stated that my balance would not transfer due to this. Since this is the case, If I cancel my pay as you go and switch to a contract, what happens to my money? There is over $100 that is an excess balance on my account and I don't want to lose that. Will I get a check returned to me since it wont transfer?

lookmanohands,
We are glad to hear that you are thinking of switching to our contract pricing. If you were to switch from our Pre-Pay and still have a balance the balance would not be able to be transferred. We are unable to refund the balance. We encourage you to use the balance up before you transfer.
RobinD_VZW
Follow us on twitter @VZWSupport

Pay as you go verizon or straight talk?

I was wondering if anyone had some input for me. I am paying around $250 a month for 2 smartphones and wifi. I have the unlimited family share plan with 12G of data. I can't afford this anymore. I am thinking of switching to the pay as you go program or straight talk or something. But my contract on my lines don't end 2015. I can't afford to pay the early termination fees that will be close to $650 or so. Any help would be appreciated, thanks.

Do you have any friends which are interested in taking over your lines?
Have you considered lowering your data consumption and your data allowance to something more manageable?
Did you purchase all of the devices and enter into contracts on all of the lines at the same time? Each line has its own separate contract and unless all of the devices were purchased at the same time, the contract end dates would be different. Possibly you could terminate SOME of the devices in order to lower your bill and have an ETF which is more within reach?
Good luck.

Pay as you go abroad

I am currently abroad and My pay as you go phone will receive texts and calls,and I can call from it,but I can not send any texts,I keep getting the cant send message. Any ideas how I can fix this so I can send text messages?

Hi
Sounds like it may be an issue with the network your connected to.
If you try a manual network selection in settings or network settings and chose a different network.
What device are you using?
Thanks.

Turning Open items which are partially payed into Close items.. How?

Hello,
In our company we use partial payment to Vendors using transaction F-59 and also automatic paymant of full amounts. Everything is working correctly but since we use very offen partial way of paymant, on transaction FBL1N I have a lot of open items and most of the time I don't know exactly how much do I own to vendor(s).
To explain it easier I will show one simple example:
1. I own to one of my vendors amount Eur 10.000
2. Using transaction F-59 (partial payment) I pay him Eur 3.000
3. When I open transaction FBL1N for that vendor and if I choose to show only Open items
total amount shows me that I own him Eur 10.000 instead of due amount 7.000
I understand that total amount of Eur 10.000 instead of Eur 7.000 is shown because we use partial instead of residual way of paymant but I would like to know is there any way I could manually turn these Eur 3.000 into close item because they are already payed?
Searching through Internet I found that transaction F-44 could be used for similar but I am not sure it can do exactly what I need: to turn all partial payed open items to close items so for each vendor then I could see exact amount I own them.
I hope someone can help me with this because I must solve it ASAP and it's slowing me down at my workplace and it would be great if I could manually close some open items, because they are already payed.
Greetings,
Adi
Moderator: Please, try searching before posting a new thread. Clearing issues are well described on these forums
Edited by: samnovice on Jul 30, 2011 3:50 PM

Hi:
Knocking off invoices against partial payments in F-44 is a standard procedure that is used to clear open item outstanding in Vendor ledger FBL1N. You should ideally clear partial payment in Residual Tab of F-44 and for remaining amount e.g 7 in your case you should double click in residual item column next to amount. By doing so system will also copy the original invoice reference to the partial document AB (with 7 amount) as per setting defined in OBA0 for residual item clearing.
Line item 10 and its payment line item 3 are standing open in ledger because you did not apply them in F-44. You could have also directly apply them in F-59 of F-53. Partial document will be generated with document type as per setting you have defined in OBXH. Hope this will clear your understanding.
Regards

Generated Crystal Report PDFs are different on Windows server

Post Author: present
CA Forum: .NET
Hi,
I created Crystal Report template (with two columns on one
page) inside VS 2005 on my Windows XP Professional machine.
But there are formating problems on both XP and Windows
Server machines:
1) On Windows XP machine, I have to overlap the two columns
on the page inside VS 2005 editor in order to generate
correct PDF file (without overlap). How to fix the the
overlapping problem in editor?
2) On Windows 2003 server: After I put the template on
Windows 2003 server that has no VS 2005 installed (only
CRRedist2005_x86.msi was installed), the generated PDF has
different font size and layout (such as page size, column
overlap, etc).
Do I have to install VS 2005 on server too? It is really
frustrating that I have to print document generated on the
server before I know if the template works fine or not.
Any help is highly appreciated!

Typically when you are seeing page formatting issues on different machines, it could be because of printer drivers (or lack of). The reporting engine relies on the printer driver configured on the machine to provide information so that a page can be properly rendered. If you designed the report on your dev machine which is using PrinterA and then deploy to another machine using PrinterB, the formatting could be off. So make sure that the exact same printer driver is being used on these machines. If your deployments are expected to go to different machines where you don't know what printer will be installed, then you will need to design the report such that it can be rendered as best as possible. Another option is to check the "No Printer" option and this should render the report the same on any machine with any printer, but then you'll need to make sure you handle any scenarios where the user wants to print to the printer.
If this is an ASP.NET application then permissions could play a part if the printer drivers cannot be accessed. There are whitepapers on the BOBJ support site that have information on to configure CR to print reports in ASP.NET apps.
-MJ

I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Why?

I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Shouldn't Pages, Numbers, and Keynote show version 9.?? My MAC confirned installation of v9.0.3 and even accepted the software code. With this discrepancy, how can I determine if the latest was installed and operational? I even downloading v9.0.4, 9.0.5, and 9.1. When I tried installing these downloads it popped up note stating that a later version of Keynote was already installed.

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Can I buy a phone verizon pay as you go and use it on my verizon contract?

My verizon wireless broke and I don't have insurance and I'm six months before I can qualify to renew a contract, so I'm stocked in trying to get a second hand phone, but I saw the same model of my broken phone selling in flea bay from the verizon pay as you go. My question is, can I use one of those phones to be activated on my verizon? I would hate to buy the phone and later find out that verizon won't activate it.

You can also view the eligibility requirements of our Certified Pre Owned Program at the link below. This program helps:
If your device is lost, stolen or damaged and you are not enrolled in Total Equipment Coverage or Wireless Phone Protection, you can purchase a Certified Pre-Owned Replacement device to replace your original device.
http://support.vzw.com/information/cpo_replacement.html

Can I share my upgraded storage with my wife's iPhone storage so we are not paying twice for extra storage

can I share my extra paid storage with my wife's iPhone so we are not paying twice and she can back up successfully to the cloud from her device?

Only if you are both logged into the same iCloud account.

CUBE - Are different pay as you grow license types stackable?

Similar Messages

Maybe you are looking for