Cube Export Fails - stops all databases in application

Hi all,
I have a problem with some cubes in an application, when I go to export them, the export process will have hung and never completes, and all of the databases in the application will have stopped.
In the Essbase.log file I get:
[Mon May 10 12:03:53 2010]Local/ESSBASE0///Info(1051001)
Received client request: MaxL: Execute (from user [admin])
[Mon May 10 12:03:53 2010]Local/ESSBASE0///Info(1051009)
Setting application Ops active for user [admin]
64-bit Release 11.1.1 (ESB11.1.1.3.0B126)
*** A fatal error has happened ***
*** The server is trying to shutdown the application ***
*** Exception occurred ***
I've stopped/started Essbase itself fully but still get the same problem. Can anyone advise on what might be going on?
Server is Redhat Linux, Essbase is 11.1.1
Thanks in advance

OK, thats very sound advice. I actually have 10 databases under the single application. So I may move them into seperate applications.
One of the dimensions is dense - although I have other databases with dense dimensions and they seem OK.
I even tried using the EAC Migrate wizard to move the offending cube to my local development environment, delete it off the server then migrate it back but it still exhibited the same problem. Luckily the data contained within I could easily reload from our OLTP system so the export itself was somewhat superfulous but I just don't like the thought that one or more of the cubes has a data problem in some manner.

Similar Messages

DPM 2012 R2 catalog failing, not all database items are available for restore

I recently started protecting my SharePoint 2013 site using DPM 2012 R2. I was able to get item level recovery working, but not all of the database items are showing in the recovery section. I go get the warning "DPM failed to gather item
level catalog for 1 database(s) of the SharePoint Farm Some of the recovery points for these databases in the farm would be associated with an earlier successful catalog. (ID 3133)"
I have looked on the SharePoint front end web server in the WssCmdletsWrapperCurr log file and I do not see any exception there.
It it is strange because I do get the option to restore some items, just not all of them. Any help would be greatly appreciated.

Hi,
Resizing the boot partition (usually C:) should not effect DPM in any way. DPM writes directly to it's volumes contained in the storage pool and not through the mount points on the C: drive. So is the DPM UI showing
missing volume next to some data sources ? Try doing a DPM disk rescan and see if that removes the missing volume flag.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

Export Failed (To Excel)

I searched a few threads showing the same problem... only without any confirmed solution. Exporting a workbook to excel comes up with 'export failed' while all the other exports work fine.
I've increased virtual memory on the computer.... and still Discoverer cannot export to excel. I also tried exporting on a server with over 7 gigs of memory. I am guessing the problem the process of formatting data to excel format.
Any other suggestions ??
Thanks.
Edited by: user10147500 on Jun 3, 2010 11:25 AM
Edited by: user10147500 on Jun 3, 2010 11:28 AM
Edited by: user10147500 on Jun 3, 2010 11:29 AM

Hi
Are you by chance using Windows XP with Service Pack 2 installed. Microsoft, as always, does not quite tell you everything that they changed. The big one this time is that Service Pack 2 sets a registry switch that by default prevents Internet Explorer from transferring applications between zones. To Microsoft, running something from a web server (Discoverer) and then running something on your PC (Excel) means running applications in two different zones. With that switch set, your PC cannot switch zones when running Internet Explorer and so cannot open Excel from within Discoverer Plus or Viewer.
To allow Discoverer Plus to call a local copy of Excel you need to reset the switch so that it one again allows zone switching, like the old XP. The switch should be set to 0.
Follow this workflow:
1. Open your registry and look for this setting:
[HKEY_LOCAL_MACHINE]/Software/Microsoft/Internet Explorer/Main/FeatureControl/FEATURE_ZONE_ELEVATION/iexplore
It is probably set to 1 and it should be set to 0
In the Windows environment:
1. Start | Run | Regedit (to open the registry)
2. Locate the following key path:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_ZONE_ELEVATION\iexplore.exe
3. Change the value of this setting from 1 to 0 then close the registry editor
4. Ensure that the following settings for the .xls & .html file types are unchecked:
a) Open Windows Explorer
b) Goto Tools | Folder Options | File Types tab
c) Select the Extension XLS (or HTML) then click on the Advanced button
d) At the botton of the screen are three settings that use checkboxes. If either of the following two are checked, un-check them:
'Confirm Open after Download' and 'Browse in same window'
5. Select the OK button
6. Click the Apply button
7. Re-boot the PC
Let me know if this helps
Best wishes
Michael

Coldfusion application fails to conect database(JDBC connection)

Hi,
I am facing some problem in my application producion box,
Problem details::
My Coldfusion application fails to conect database(JDBC connection) .After restarting cold fusion services it again work smoothly.
Below are the production coldusion details.
Server Product: ColdFusion MX.
Version: 6,1,0,83762
Edition: Enterprise.
Please suggest its urgent.

Hi
Yes I have examined all the code as well as all the log files but unable to find any issue there. I am giving its error massage.
Error Massage:
Java.SQL.sqlexception. No more available statements please create your package with a larger dynamic section value
The application within that has reported to be a FAILURE.
Some times has no error massage it displayed blank page.
Below are the system details.
1. Operating system: windows 2000.
2. ColdFusion version: 6.1(6,1,0,83762)
3. Webservices: IIS
4. database: SqlServer 2000 and DB2.
5. Java VM Version : 1.4.2-b28
Kindly update its urgent, because its a production issue.
Let me know if you have any questions regarding my explanation.....
Thanks.
Gautam Kumar.

I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?

I am using Iphone 3gs. Last week I updated my itunes to latest version, although I couldnt not update my iphone OS since the download fails saying error 9006. For last 2 days all my Iphone applications fail to open except the default ones. Any solutions?

Download a free app and try again, you can delete the free app afterward.

How do i stop all of my previous applications from starting up when i turn my macbook pro on?

Whenever I turn on my Macbook Pro all of the applications i was using the previous session start up. It takes a good five minutes to cycle through all of the start ups and closing them down.
How do I stop this?
Thanks,
Lee

When you restart or shutdown, uncheck this option.

To run an application on iAS6sp1 on HP-Unix, while starting the kjs from command line, it gives a GDS error and crashes. Subsequently, after stopping all services and restarting iAS wouldnot come up.

Hi,
Not a problem, please post the KJS error logs for me to hunt the
exact reason for the error.
Thanks & Regards
Raj
Neel John wrote:
To run an application on iAS6sp1 on HP-Unix, while starting the kjs
from command line, it gives a GDS error and crashes. Subsequently,
after stopping all services and restarting iAS wouldnot come up.
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

How to stop all threads running in a application

I need to stop all the threads that are currently running in my application. How to do this.

call System.exit();

Stopping all the applications

HI,
I have a requirement where I need to stop all the applications (not undeploy) automatically while shutting down the sever.I'm using Oc4J 10.1.3. Could anyone help me in this??
Thanks,

Hi,
Thanks for the reply. But I don't want to shutdown the server forcefully. Main purpose of my requirement we have many applications on same oc4j Instance (in development env) & hence don't want all the applications to be started while starting the server(which is taking time). Changing the server.xml's application attribute start="false" will serve this purpose but if I start the application it will be set to true & will remain true when I start the server next time which I don't want. So I want something which stops the applications(while shutting down server) so that everytime I start the server, server.xml will have start="false". Hope I'm able to clear the thing what I want.
Thanks,

Every time when i turn my mac on all of the applications i used frequently open up..that is so annoying how do i stop that

every time when i turn my mac on all of the applications i used frequently open up..that is so annoying how do i stop that.

Lion?
Disable Mac OS X Lion Resume & App Window Restore Completely
Disable “Reopen Windows When Logging Back In” in Mac OS X Lion Completely

One full backup job to run full backup of all databases and it failed. I post error message.Any help?

Executed as user: abc\user1. ... 2004-2009, Quest Software Inc. Registered Name: abc INC
Processed 1152 pages for database 'abc123', file 'abc123' on file 1. Processed 4 pages for database 'abc123', file 'abc123_log' on file 1. BACKUP DATABASE successfully processed 1156 pages in 0.725 seconds (13.051 MB/sec).
Backup added as file number: 1 Native Size: 11.19 MB Backup Size: 1.87 MB CPU Seconds: 0.27 [SQ
The backup set on file 1 is valid. CPU Seconds: 0.25 [SQLSTATE 01000] (Message 1)
LiteSpeed(R) for SQL Server Version 5.1.0.1293 Copyright 2004-2009, Quest Software Inc. Registered Name: abc INC
Processed 456 pages for database 'WSS_Search_abc1', file 'WSS_Search_abc1' on file 1. Processed 24 pages for database 'WSS_Search_abc1', file 'WSS_Search_abc1_Data2' on file 1. Processed 1 pages for database 'WSS_Search_abc1', file 'WSS_Search_abc1_log'
... The step failed.

Hi bestrongself,
Before you use a SQL Server Agent job to back up all database, I recommend you run the backup statement in query windows directly, and check if it can run well. I do a test by using the following statement,
DECLARE @name VARCHAR(50) -- database name
DECLARE @path VARCHAR(256) -- path for backup files
DECLARE @fileName VARCHAR(256) -- filename for backup
DECLARE @fileDate VARCHAR(20) -- used for file name
-- specify database backup directory
SET @path = 'C:\Backup\'
-- specify filename format
SELECT @fileDate = CONVERT(VARCHAR(20),GETDATE(),112)
DECLARE db_cursor CURSOR FOR
SELECT name
FROM master.dbo.sysdatabases
WHERE name NOT IN ('master','model','msdb','tempdb') -- exclude these databases
OPEN db_cursor
FETCH NEXT FROM db_cursor INTO @name
WHILE @@FETCH_STATUS = 0
BEGIN
SET @fileName = @path + @name + '_' + @fileDate + '.BAK'
BACKUP DATABASE @name TO DISK = @fileName
FETCH NEXT FROM db_cursor INTO @name
END
CLOSE db_cursor
DEALLOCATE db_cursor
the script allow you to backup each database within your instance of SQL Server.
Your account need to have read and right permission to the path file.
If the above script can run well directly, then you can create a job and put your backup statement inside of it. There is a similar detail about how to create a simple backup job in SQL Server. You can review it.
http://www.petri.co.il/create-backup-job-in-sql-server.htm
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Failed to stop two components in application server

my operating system is hp-ux 11.1,when iI use the command :opmnctl stopall
to stop all compenents in middle-tier 904,but there are two components can not be stopped because of timeout. how should i do
any help will be appreciated.

Look for a server.log file.
You could have some memory errors, which not necesary means that your server needs more memory but you may need to give more memory to the processes on the configuration files.
Carlos

Failed To load database? error

Hi there,
I am trying to implement "Replay transaction" feature which is in 11.1.1 version to one of my database.I followed all the steps that are specified here http://oraclebizint.wordpress.com/2009/02/18/hyperion-essbase-11110-database-archive-and-replay-in-bso-cubes/
After Archiving and restoring the databse. i am trying to connect to databse from excel addin but it is giving me "failed to load database" error
I tried to use replay transaction from console but its giving me the same error....
Any suggestions???
Thanks in advance...

Hi john,
I did that but didn't see any ghost processor running....YEah i ma running it in eas...After archiving the database i am stopping/unloading tha databse to restore. after that when i tried to start it then it says "failed to load the database."
It's acting really wierd ...sometime even application is not starting.
I tried to delete the database and create a new one and then i restored it.
It worked for the first time... but when i tried to apply it second time inorder make use of replay transaction then again there is aproblem.
Now i'm not even able to create a database when its running ..when i stop the application then it is showing the databse which i already deleted.

Cube refresh fails with an error below

Hi,
We are experiencing this problem below during planning application database refresh. We have been refreshing the database everyday, but all of a sudden the below error is appearing in log. The error is something like below:
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
When the database refresh is done from workspace manually, the database refresh is happening successfully. But when triggered from unix script, its throwing the above error.
Is it related to some provisioning related issue for which user has been removed from MSAD?? Please help me out on this.
Thanks,
mani
Edited by: sdid on Jul 29, 2012 11:16 PM

I work with 'sdid' and here is a better explaination of what exactly is going on -
As part of our nightly schedule we have a unix shell script that executes refresh of essbase cubes from planning using the 'CubeRefresh.sh' shell script.
Here is how our shell looks like -
/opt/hyperion/Planning/bin/CubeRefresh.sh /A:<cube name> /U:<user id> /P:<password> /R /D /FS
Here is what 'CubeRefresh.sh' looks like -
PLN_JAR_PATH=/opt/hyperion/Planning/bin
export PLN_JAR_PATH
. "${PLN_JAR_PATH}/setHPenv.sh"
"${HS_JAVA_HOME}/bin/java" -classpath ${CLASSPATH} com.hyperion.planning.HspCubeRefreshCmd $1 $2 $3 $4 $5 $6 $7
And here is what 'setHPenv.sh' looks like -
HS_JAVA_HOME=/opt/hyperion/common/JRE/Sun/1.5.0
export HS_JAVA_HOME
HYPERION_HOME=/opt/hyperion
export HYPERION_HOME
PLN_JAR_PATH=/opt/hyperion/Planning/lib
export PLN_JAR_PATH
PLN_PROPERTIES_PATH=/opt/hyperion/deployments/Tomcat5/HyperionPlanning/webapps/HyperionPlanning/WEB-INF/classes
export PLN_PROPERTIES_PATH
CLASSPATH=${PLN_JAR_PATH}/HspJS.jar:${PLN_PROPERTIES_PATH}:${PLN_JAR_PATH}/hbrhppluginjar:${PLN_JAR_PATH}/jakarta-regexp-1.4.
jar:${PLN_JAR_PATH}/hyjdbc.jar:${PLN_JAR_PATH}/iText.jar:${PLN_JAR_PATH}/iTextAsian.jar:${PLN_JAR_PATH}/mail.jar:${PLN_JAR_PA
TH}/jdom.jar:${PLN_JAR_PATH}/dom.jar:${PLN_JAR_PATH}/sax.jar:${PLN_JAR_PATH}/xercesImpl.jar:${PLN_JAR_PATH}/jaxp-api.jar:${PL
N_JAR_PATH}/classes12.zip:${PLN_JAR_PATH}/db2java.zip:${PLN_JAR_PATH}/db2jcc.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/css-9_
3_1.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/ldapbp.jar:${PLN_JAR_PATH}/log4j.jar:${PLN_JAR_PATH}/log4j-1.2.8.jar:${PLN_JAR_
PATH}/hbrhppluginjar.jar:${PLN_JAR_PATH}/ess_japi.jar:${PLN_JAR_PATH}/ess_es_server.jar:${PLN_JAR_PATH}/commons-httpclient-3.
0.jar:${PLN_JAR_PATH}/commons-codec-1.3.jar:${PLN_JAR_PATH}/jakarta-slide-webdavlib.jar:${PLN_JAR_PATH}/ognl-2.6.7.jar:${HYPE
RION_HOME}/common/CLS/9.3.1/lib/cls-9_3_1.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/EccpressoAll.jar:${HYPERION_HOME}/common/
CLS/9.3.1/lib/flexlm.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/flexlmutil.jar:${HYPERION_HOME}/AdminServices/server/lib/easse
rverplugin.jar:${PLN_JAR_PATH}/interop-sdk.jar:${PLN_JAR_PATH}/HspCopyApp.jar:${PLN_JAR_PATH}/commons-logging.jar:${CLASSPATH
export CLASSPATH
case $OS in
HP-UX)
SHLIB_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${SHLIB_PATH:-}
export SHLIB_PATH
SunOS)
LD_LIBRARY_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LD_LIBRARY_PATH:-}
export LD_LIBRARY_PATH
AIX)
LIBPATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LIBPATH:-}
export LIBPATH
echo "$OS is not supported"
esac
We have not made any changes to either the shell or 'CubeRefresh.sh' or 'setHPenv.sh'
From the past couple of days the shell that executes 'CubeRefresh.sh' has been failing with the error message below.
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
This error is causing our Essbase cubes to not get refreshed from Planning cubes through these batch jobs.
On the other hand the manual refesh from within Planning works.
We are on Hyperion® Planning – System 9 - Version : 9.3.1.1.10
Any help on this would be greatly appreciated.
Thanks
Andy
Edited by: Andy_D on Jul 30, 2012 9:04 AM

Failed to load database information. Error in File temp_

Our environment:
Windows Server 2012 R2 Data-center Edition 64 bit
Visual Studio Pro 2013 Version 12.0.3.30110.00 Update 1
.Net 4.5.51641
Crystal Reports for VS 2013 V13.0.9.1312
Oracle ODAC 11.2.0
We created a winform application to generate a form letter report that runs fine within the IDE. When we build the the exe and copy it from the project folder to a folder on the C:\drive of this same pc and try to execute it we get these error messages (partial list);
CrystalDecisions.CrystalReports.Engine.DataSourceException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information. ---> System.Runtime.InteropServices.COMException: Failed to load database information.
Error in File temp_d55286fc-26ee-4216-9062-3e32380313ab {B640FD39-66AC-4B6E-995D-7218BB48A992}.rpt:
Failed to load database information.
   at CrystalDecisions.ReportAppServer.Controllers.DatabaseControllerClass.ReplaceConnection(Object oldConnection, Object newConnection, Object parameterFields, Object crDBOptionUseDefault)
   at CrystalDecisions.CrystalReports.Engine.Table.SetDataSource(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(DataSet dataSet)
   at cr3Test.Form1.Form1_Load(Object sender, EventArgs e)
Here is the app:
Imports System.Data.OleDb
Imports System.Data
Imports System
Imports System.Windows.Forms
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
    Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
        Dim crReportDocument As New CrystalReport3()
        Dim DataSet1 As DataSet
        Dim adoOleDbConnection As OleDbConnection
        Dim adoOleDbDataAdapter As OleDbDataAdapter
        Dim connectionString As String = ""
        connectionString = "Provider=OraOLEDB.Oracle;"
        connectionString += "Data Source=ourdb;"
        connectionString += "User ID=ouruserid;Password=ourpsw"
        adoOleDbConnection = New OleDbConnection(connectionString)
        Dim sqlString As String = "select * from TEMP_FRI_LETTERS"
        adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
        DataSet1 = New DataSet()
        adoOleDbDataAdapter.Fill(DataSet1, "TEMP_FRI_LETTERS")
        'Dim xmlPath As String = "C:\Temp\test.xml" ' use these two statment s to verify dataset works
        'DataSet1.WriteXml(xmlPath, XmlWriteMode.WriteSchema)
        crReportDocument.SetDataSource(DataSet1)
        crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
        crReportDocument.Refresh()
        crReportDocument.PrintToPrinter(1, False, 0, 0)
        DataSet1.Dispose()
        adoOleDbDataAdapter.Dispose()
        adoOleDbConnection.Close()
        adoOleDbConnection.Dispose()
        crReportDocument.Dispose()
        Me.Close()
    End Sub
End Class
Here is the app.config:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
    <startup useLegacyV2RuntimeActivationPolicy="true">
        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
    </startup>
    <system.windows.forms jitDebugging="true" />
</configuration>
We have the CPU set to x86 as we are ultimately trying to generate a 32 bit app for XP and Win 7. We only installed the 32 bit run time on this pc because we have no intention of going to 64 bit apps on the clients. Are there additional dlls or something that has to be installed in the same folder as the exe on this development machine.
Bruce

Looking at the AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_myprograminfo led us to the last dll loaded being:
LoadedModule[211]=C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crdb_adoplus_res_en.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
Scanning the community for "crdb_adoplus_res_en.dll" we got a hot on this issue again:
Failed to load database information. Error in File temp_
From the above we found this:
1. the app.exe.config is all in one package which cannot be separated with the EXE file.
2. the supporting component such as dll files, app.exe.config etc CANNOT be combined into the EXE file
Adding the cr3Test.exe.config to the same folder as the cr3Test.exe RESOLVED the problem on Win 7. It also RESOLVED the problem on Server 2012 R2.
We still need to test on Server 2008 R2 but we are hopeful when that time comes.
Thanks.
Bruce

Cube Export Fails - stops all databases in application

Similar Messages

Maybe you are looking for