Cube level actions peroforms

 hi
  iam creating the cube  level actions  is url and drill though   and reports in vs 2010 and vs 2012 it  is successfully  develop and  process but  i  was try to browser level    attribute  right
click it is  not showing
 vs 2012 & vs 2010 is support  is support are url action and drill down actions?

Hi Sheshu,
    VisualStudio 2010 and 2012 wont support displaying actions in their cube browsers. There is a major change in the browser tab of vs2010 which is the removal of Office Web Component. The alternative is to click on 'Analyze in Excel' button in
the Browser tab and test the actions.
Regards,
Venkata Koppula

Similar Messages

  • Navigational Attribute data is not display in Cube level and reporting

    Hello ALL
    Iam facing a problem like,I created Navigational attribute and I selected that navigational attribute in cube level also but data is not display in cube level.
    What will be the problem?Pl help me out.
    regards
    balaji

    Hi Dinesh
    You mean base characteristic means loading data after creating Navigational attribute?Is it this way,(orelse can u tell me about this base characterstic)
    Yes after making that particular attribute as a navigational attribute I loaded data in master data tables.
    How to run Attribute change run?can u give me steps
    regards
    balaji

  • Error in Update rules while defining CKF at cube level

    Hi,
    I am willing to create a Calculated Key figure at CUBE level using formula function
    <b>Unit Cube: Item Cube / Units</b>
    <b>Definitation</b>
    Item Cube - Total Cube for line
    Units   - Actual destination quantity in alternative unit
    <b>Units</b>
    The Unit for ‘Item Cube’ is Volume unit and
    The Unit for ‘Units’ is Alternative Unit of Measure for Stock keeping Unit
    When i tried to create CKF at Cube level in update rules using formula it is displaying me an error that no unit is available in source system for the CKF Unit Cube
    How can I proceed on this
    Thanks

    Hi
    Have you transferred the global settings from the context menu of source system where all the units from the source is replicated to BW system
    Regards
    N Ganesh

  • Duplicate records in Cube Level ( BI 7.0 )

    Dear All
    I am working on BI 7.0 , I have an issue , i am  loading the data from  Flat File to ODS  and from ODS to Cube . In ODS  we are selected Overwrite option, in cube level we have an Summation option. the problem is while loading the data from Flatfile to ODS  records are fine . from ODS  to cube data  loading also fine but here i am getting the Duplicate records .
    what are the  best options to go ahead in such a situations??
    Regards
    KK

    I am sharing a case occured for me. Please see if its applicable for you.
    Sometimes, in the step loading to Cube, when any type of problem occurs, we restart the load. If the cube load prompts saying 'the lost load was unsuccessful.... reload?', this problem may occur. It will load the records in the previous load also.
    Verify what has been duplicated from the ODS changelog table and the cube load record count. If you see the number of records updated being the total of the records in the different ODSR request (in the change log table). Delete the previous load in the cube. (provided no other side effect is produced e.g from start routine etc)
    Cheers.

  • AUTHORIZATION ISSUE: cube level data restriction in BI

    Hi all,
    I have few cubes and ODS which are containing data. The requirement is to restrict the cube level data.
    Eg : we have option to see the cube data in RSA1( ADMIN WORKBENCH).Right click on cube manage data.
    the requirement is to restrict to see the data company code = 111(only)
    Likewise for few users only company code = 222.
    If they try to see other than 111, they should get u201Cno authorization messageu201D.
    Cube data               
    company code         distribution channel         account     amount
    111                         10                                   10002     100
    222                        20                                      10002     200
    333                        30                                       10002     300
    444                        10                                      10002     400
    1111                20                                       10002     500
    1111                30                                      10002     600
    2222               30                                           10002     700
    Thanks in advance.
    Jo

    Hi MaikI,
    Thank for the inputs.
    Actually i want restrict the data based on the ANALYSIS AUTHORIZATION - 0TCAIPROV.
    I want to give s_rs_comp-provider value *, and i want to control the query (data) access through analysis authorization. i want to create zanalysisauth which contains 0TCAIPROV = $variable.
    variable is populated with one/two provider values at runtime .
    based on the runtime variable population user should get access.
    But with this implementation user is able to open all queries.where i am going wrong? how can i do this?
    Regards,
    Joseph

  • Acrobat X Standard Bookmarks - How do I make the Zoom Level action default to "Fit Page" when combining to one pdf?

    Acrobat X Standard Bookmarks - How do I make the Zoom Level action default to "Fit Page"?
    When I combine multiple pdf files into a single binder, Acrobat creates a bookmark for each file.  In the properties for each bookmark, there is an action created to go to the page in the document and has the zoom level at "fit width".  Question is, how do I change this apparent default zoom level to "fit page" when Acrobat creates the bookmarks when combining the pdf files?

    Is there a way to do it in one step instead of individually on each bookmark?  This gets VERY cumbersome when I have upwards of a hundred bookmarks to change.

  • Master Data is missing for Specified Matierials at cube level  !!

    Hello Experts,
    Good Day..!!
    I have been facing an issue in my project,  Master Data is missing for a KF and values are not displayed  in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
    Intially, i checked from Cube End and found the issue is in Cube level only.
    For that in the data flow, i already checked whether the data has been loaded perfectly or not.
    Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
    Kindly advice how can i move further..
    Thanks,
    SN.

    Hi,
    Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
    Hope this helps...
    Rgs,
    Ravikanth.

  • Hide all members' value for specify date from CUBE level

    Hi There,<o:p></o:p>
    With my current CUBE data available for yesterday, but 2-5 % data also get loaded through ETL for today as it's live data feed and process all data
    at CUBE level.<o:p></o:p>
    Now problem here till yesterday all data are okay and that make send to end user, but chunk of data for today (2-5 %) don’t make any sense…. now question
    here is any way I can hide value for all members for today which is (2-5 %) only, that way data visible from CUBE level only till yesterday.<o:p></o:p>
    Exactly what I mean if anyone connect to my CUBE they can only see data till yesterday (day-1), but not for today.<o:p></o:p>
    Regards,<o:p></o:p>
    Nagen<o:p></o:p>
    Thanks, Nagen

    Hi,
    two possibilities:
    1) Create a security implementation, so that the users are allowed to see the data until yesterday. Dimension Security on your Date Dimension)
    2) Scope the Dimension Member for future Dates to NULL
    Kr Jürgen

  • Cube level keyfigure valuse are getting doubled?

    Hi,
    DSO level i am getting correct values but in cube level keyfigure valuse are getting doubled?
    can you please advice me,

    Hi,
    In DSO, Its always in overwrite mode, but in infocube it is in aggregation, so it sums up all the kefigures.
    Check if you have two full request in your infocube. If so please delete one, it solves your problem.
    Hope it helps.
    Thank you,
    Prem

  • Calculations for Key Figure at CUBE Level or REPORTING Level

    Hi Folks,
    What are the conditions to decide whether we need to go for keyfigure calculations at infocube level or at reporting level.
    How to achieve them if done at cube level.
    Could anyone provide some KT with examples?
    Regards
    Kittu

    Hi,
    I got your point.
    Could you tell me how to use below mentioned formula at transformation time?
    In brief the formula calculates the number of policies using field  " s endorsement type".
    Formula is as below:
    SUM(CASE WHEN S Endorsementtype IN ('004','015') THEN -1 WHEN S Endorsementtype IS NULL  AND S Gross IS NOT NULL  THEN 1 ELSE 0 END)
    No of policies is a calculated keyfigure.I dont have this field in my datasource.
    could you tell me the steps ?
    Regards
    kittu

  • Problem with SSAS cube reporting action when using pivot filter with cubevalue function

    Hi everyone,
    I have a quite specific problem when I combine cube actions (Reporting Action SSRS) with Excel's cubevalue() function.
    The problem is when I use a pivot filter as a parameter for the cubevalue() function. The action item does not show up in the context menue.
    The cube action works fine when I do it from a "normal" pivot or if I use the cubevalue() function without the reference to a pivot filter (all the parameters in the function are "hard-coded").
    I use SSAS 2012 and Excel 2010.
    Thanks for yor help.
    Gerhard

    Hi everyone,
    I actually figured out a way to solve this problem. I had to use a detour to solve this bug in Excel (at least I think it's a bug).
    What I needed to do: I had to make Excel belive that the filter is actuall hard-coded and does not come from a pivot filter. This was only possible by adding a new calculated measure to the cube that gives back the MEMBER_Unique_Name to the current member
    passed. This "value" can then be used to go back to the cube and select the cubemember function. Here is a small example.
    This is the cube member:
    CREATE MEMBER CURRENTCUBE.[Measures].[RegCompBranNameKey] AS
    [Company Branch].[Reg - Comp - Bran Name].CurrentMember.Properties("MEMBER_UNIQUE_NAME", TYPED),
    VISIBLE = 0 ;
    And this is then done in a hidden Excel cell:
    =CUBEMEMBER("Metrics";
     IF(RIGHT(CUBEVALUE("Metrics";<PivotFilter>;"[Measures].[RegCompBranNameKey]");5)="[ALL]";"[ALL]";
      RIGHT(CUBEVALUE("Metrics";<PivotFilter>;"[Measures].[RegCompBranNameKey]");LEN(CUBEVALUE("GlobalMetrics";<PivotFilter>;"[Measures].[RegCompBranNameKey]"))-57)
    I had to use the UniqueName property because I have a combined filter. That's also the reason for this truncation and also useing the last part of it. If you just have a straight key you more easily use it.

  • Essbase cube level order

    Hi All,
    I am using Essbase XMLA interface .
    As levels are ordered from lowest to highest starting from the root level. Essbase orders them in the reverse direction—level 0 is the leaf level, and level 1 is the parent of the leaf level.
    Is there any way to get the level in normal order  - level o parent and level 1 as child ?

    Incidentally we had been trying to use Essbase studio as an option.But there are 2 oints that we are trying to investigate.
    1) Can we bypass deployment of data and metadata everytime through Essbase studio after the initial outline is delpoyed? In the system architecture the relational tables are populated using ODI. We would like to load the data and metadata through ODI into the cube. Eeven then can we implement drill thru bypassing deployment through Essbase Studio?
    2) If Essbase studio is imperative for drill through then what are the batch automation options for deployment through Essbase studio? Ideally the option should be after the relational tables are populated through ODI then the Essbase deployment should be invoked and batch script should load the data and metadata through Essbase Studio.
    Please advise.
    Thanks,
    Anirban

  • Creation of field in the cube level

    hi
    There is one cube in which i have to create one field which field is already in the source but not in the target level and the  most importantly  this cube is working cube data is loadng into it i we have to remodle this cube
    so can any body tell without any distubance how we can add this fiel into the cube and map with the source and finally reflect in
    the report
    regards
    gurkiran

    Hi Gurkiran,
    You don't mention your BW release, if you have 7.x then there is a remodeling function to do this, just GOTO
    RSA1, right click on the cube, select 'additional functions' and then you have the 'remodeling' option.
    If you have a 3.x release then you could have the problem that there is an inconsistency between the
    DB and the ABAP dictionary if you try and add a field to a cube that has data already, in this case
    it is better create a copy of the cube, generate an export datasource on the cube and load the data
    to the copy cube, then delete the data from your original cube, make the change of adding the field
    and then load the data back from the copy cube.
    I hope the above helps.
    Best Regards,
    Des

  • Advanced Table does not refresh after database level action

    Hi,
    I have a page which has an advanced table. I update the advanced table from the page do some validations, update some DB level columns(also part of advanced table) and see that the changes are saved to the DB but the advanced table does not show the updates done at the DB level.
    I tried clearing the VO Cache and re-executing the VO but still it does not refresh the Advanced table data.
    This is very critical requirement for the client, any inputs will be greatly appreciated.
    Thanks a lot in Advance.
    Here is the code snippet from my CO's processRequest:
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    OAAdvancedTableBean tblbean = (OAAdvancedTableBean)webBean.findChildRecursive("recasttable");
    if(tblbean!=null)
    tblbean.setRendered(true);
    OAApplicationModule tblam = (OAApplicationModule)am.findApplicationModule("RecastLineAM1");
    tblam.invokeMethod("initQuery");
    tblbean.getTableData();
    Here is my AM - initQuery() code:
    public void initQuery()
    //clearVOCaches("RecastLineEO",true);
    clearVOCaches(null,true);
    getRecastLineVO1().init();
    Here is the VO - init() code:
    public void init()
    System.out.println("****************************executing...");
    OADBTransaction tx = (OADBTransaction) getApplicationModule().getTransaction();
    if (tx.getTransientValue("RECAST_ID") !=null)
    Number recastId = (Number) tx.getTransientValue("RECAST_ID");
    System.out.println("recastId: "+ recastId);
    setWhereClause("RECAST_HDR_ID = :1");
    setWhereClauseParams(null); // Always reset
    setWhereClauseParam(0, recastId);
    executeQuery();
    }

    hi,
    This is how I am calling a DB package. the package does updates on the table. once done I am issueing a commit and requerying the data, however the vo is not getting refreshed.... Can someone point out what am I missing... why is the VO not getting refreshed....
    This is very critical...
    Thanks
    Srini
    public void validateRecast(String respKey)
    OADBTransaction tx = (OADBTransaction)getApplicationModule().getTransaction();
    Number recastId = (Number) tx.getTransientValue("RECAST_ID");
    System.out.println("*********************validateRecast().RecastId: " + recastId);
    OracleCallableStatement ocs = null;
    Connection conn = tx.getJdbcConnection();
    String strOut="", strErr="";
    Number respId = null;
    try
    respId = new Number(respKey);
    catch(Exception e)
    throw new OAException("Invalid Responsibility");
    String stmt = "BEGIN " +
    "GE_RECAST_UTILS_PKG.validate_recast(:1,:2,:3,:4); " +
    "END;";
    try
    ocs = (OracleCallableStatement)conn.prepareCall(stmt);
    ocs.setNUMBER(1,recastId);
    ocs.setNUMBER(2,respId);
    ocs.registerOutParameter(3,OracleTypes.VARCHAR);
    ocs.registerOutParameter(4,OracleTypes.VARCHAR);
    ocs.execute();
    strOut = ocs.getString(3);
    strErr = ocs.getString(4);
    ocs.close();
    System.out.println("Returned with: " + strOut);
    if(strOut.equalsIgnoreCase("ERROR"))
    //throw new OAException(strErr);
    tx.putTransientValue("ERROR",strErr);
    tx.commit();
    getApplicationModule().clearVOCaches("RecastLineEO",true);
    RecastLineVOImpl lineVo = (RecastLineVOImpl)getApplicationModule().findViewObject("RecastLineVO1");
    lineVo.init();
    System.out.println("===============RecastLnId: " +lineVo.first().getAttribute("RecastLnId"));
    System.out.println("===============Product Line: " +lineVo.first().getAttribute("ProductLine"));
    catch(SQLException e)
    tx.rollback();
    if(ocs!=null)
    try
    ocs.close();
    }catch(SQLException e1)
    throw OAException.wrapperException(e1);
    throw OAException.wrapperException(e);
    }

  • Table does not refresh after database level action

    We have defined an Advanced table on a VO to represent invoice lines. The VO is referenced by a VL from the invoice header.
    At one point during our process, a database level package is executed on the current lines. We have a "Requery" button to refresh the lines, however, the lines do not refresh unless we exit the invoice entirely and come back to it via the VL.
    How can we refresh the lines on a current table after a database level transaction occurs?
    Thanks, Jerry.
    Our AM code is as follows...
    // handleRefreshInvoiceLines( )
    public void handleRefreshInvoiceLines()
    OAViewObject vo = (OAViewObject)getInvoiceLinesVO1( );
    if( !vo.isPreparedForExecution( ) )
    getTransaction( ).validate();
    vo.executeQuery( );
    clearVOCaches( "InvoiceLinesEO", true ); // troubleshooting
    } // handleRefreshInvoiceLines()

    Thank you. I've moved clearCache around a bit. apparently vo.isPreparedForExecution() is false. I wonder why?
    --Jerry.                                                                                                                                                                                                                                                   

Maybe you are looking for