Cube not starting up after I TRY TO switch from OS10 to OS9

Hello
I have a cube and Panther OX10.3 I frequently switch between OS9 and 10 but when I did this today it would not go to OS9 but has given me the disk icon with flashing question mark. I tried rebooting with the C key and disc but made no difference. have now rebooted holding down the alt key and have the disc syumbol in the middle of the screen but nothing is happening.

Welcome to the Apple Discussions!
Since you don't have an iBook or a Mac mini, I believe the correct forum to post your question would be here:
Discussions > Power Mac G4 > Using your Power Mac G4
Be sure to let everyone know exactly which model computer you have, is it a 450MHz or 500MHz G4 Cube? How much RAM/memory you have installed and exactly which version of Panther you're using. It might also be important to know which version of Mac OS 9 you're using. (Is it 9.1 or 9.2.2, for example.) Do you have a retail copy of Mac OS X 10.3? Is that the disk you were trying to startup from (with the "c" key or the "alt" key)? Unfortunately, it seems your internal hard drive may have some trouble. If you could startup from the Mac OS X install disk, we could probably help you troubleshoot that. If you can find it, you may also want to find the Apple Hardware Test CD that came with your G4 Cube.
-Doug

Similar Messages

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
BuildID: 20100914125854
CrashTime: 1290192405
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1287124738
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 422
StartupTime: 1290192405
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.10
This report also contains technical information about the state of the application when it crashed.''
Same thing happens when i click restart.
No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

Did the crash reporter send any crash reports? 
You can see the crash reports in this folder:
"C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Crash Reports"
See: http://kb.mozillazine.org/Breakpad
See also [[Firefox crashes when you open it]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox 
If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See:
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do?

The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do? When i go to the camera, it is stuck on a black screen. the only way to use my camera is through other camera apps, but if I try to switch it to the front camera, it freezes again.

If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required. You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty

2007 Mac Book pro Shuts down at startup attempt. Tried reloading OSX and will not start up after that.

My Mac Book Pro started having issues. I tried to relaod the operating system and it worked for a moment. When I tried to do a time machine back up it failed.
Now itr Shuts down at startup attempt. Tried reloading OSX and will not start up after that.

Dr.Conga,
did you try to do a Time Machine backup from your MacBook Pro, or a Time Machine restoration to it?
Are you trying to reload your current version of OS X (10.7.4, to judge from your signature), or are you trying to reload the version of Mac OS X that came on the grey installation DVDs that originally came with your MacBook Pro?

My MacBook Pro will not start up after entering correct password.

My MacBook Pro will not start up after entering password. Circle with an X in it and 'cancel' below it is on bottom of screen. When clicking on cancel, nothing happens. This just started last night.

Hi MJTOOTS,
Since you are getting to the login screen, it is booting past the "gray screen" phase, so try the steps in this article, like a Safe Boot.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/ts1417
You may also want to see if any of your Login Items are causing an issue.
OS X Mavericks: Open items automatically when you log in
http://support.apple.com/kb/PH14173
Thank you for visiting Apple Support Communities.
Nubz

IPhoto does not start up after upgrading

On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
What can cause this problem?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?

Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?

How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Logic pro not starting up after install.

Ive tried to install Logic pro twice and both time it will not start up after install. can someone tell me what is the best way to install this program correctly? should i just pay apple more money to install the program for me?

I have exactly the same problem. Whilst 8.0.1 would hang during startup without displaying the splash screen intermittently 8.0.2 crashs every time a few seconds after displaying the splash screen.
Although my computer is almost 6 years old it is perfectly adequate for audio work. I hope this is fixed soon. Unimpressed with the quality control.

This ipod cannot be used because the Apple Mobile Device service is not started message when I try to sync

This ipod cannot be used because the Apple Mobile Device service is not started message when I try to sync. I've had this ipod since August. I just synced it two days ago with no problems. I've recently added a new app and now it's not syncing. Any help would be great!

See here: How to restart the Apple Mobile Device Service (AMDS) on Windows
B-rock

New Macbook Pro does not start up after updating...HELP!!!

Hi,
My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
Can somebody please help me?

You should probably post your question in the MacBook Pro discussions:
http://discussions.apple.com/category.jspa?categoryID=190

R12-oafm, forms and oacore not starting up after IP adress change

Heloo my friend;
I had problem while i changed my server IP...when i start adstrtall.sh script its end wiht :
adstrtal.sh: Exiting with status 3 and adoafmctl.sh: exiting with status 204 ...soo my login page doesnt come to explorer and it gives HTTP 404 page not found error
So here is the solution:
Cause
The OC4J lock files contains the IP adress, after the ip adress change the lock files includes the wrong Ip adress which caused the OJ4J to fail
Solution
1 - open a new shell and set your apps environment
2 - cd $ADMIN_SCRIPTS_HOME
3 - adopmnctl.sh stop
4 - check if it is really down: ps -ef grep grep opm
5 - delete the following:
rm -fr $INST_TOP/ora/10.1.3/j2ee/oacore/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/oafm/persistence/*
rm -fr $INST_TOP/ora/10.1.3/j2ee/forms/persistence/*
6 - adopmnctl.sh start
7 - check if the issue has been resolved: adapcctl.sh status
I hope its helpful
Helios

Helios,
Thanks for sharing this, but please note that sharing the contents of Metalink notes is illegal. Instead, point to the Note ID or give a hint.
Note: 412980.1 - oafm,forms and oacore not starting up after IP adress change
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412980.1

My MBP will not start up after restart

My MBP (late 2011 running 10.8.something - receintly updated) will not start up after I had to do a restart to install Blackberry Desktop software (for my wife, I promise). It chimes, gets past the grey screen with the Apple logo and then just sits on the login screen but with the background only, no account or anything. My mouse pointer is there and moves but nothing else. Anyone have any idea?

Reboot holding the Shift key down on a wired or built in keyboard, this is Safe Mode and will disable the at boot kernel extension file that Blackberry installed.
When you get in uninstall the software using their uninstaller. Then reboot normally again, visit their website for a update if there is one.
Blackberry/RIM software has been causing issues around here lately.
If your machine refuses to boot normally again, then run through this list 1-8,, by #8 your machine should be booting normally again.
Step by Step to fix your Mac

A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

Did you tap "Show older backups" on the Choose Backup screen (see image below)?

N7k console not responding even after proper boot, and even from rommon mode

N7k console not responding even after proper boot, and even from rommon mode

Try using a different application (putty) and test. If that does not work, RMA the sup.
HTH

Cube not starting up after I TRY TO switch from OS10 to OS9

Similar Messages

Maybe you are looking for