Cube process stuck - finished building aggregations and indexes for the partition
Hi friends
My cube processing stuck up at "Finished building aggregations and indexes for the partition". How can I troubleshoot this.
Appreciate your help.
Royal Thomas
Royal,
Your question is discussed
here and
here also. May be it will help you out.
Best regards.
Similar Messages
-
Errors in the OLAP storage engine: An error occurred while processing the indexes for the partition of the measure group of the cube from the database.
I have dropped and recreated a fact table to refresh the data as the table is having identity columns. So not able to directly insert data. After that cube is throwing above error.
Please suggest.Hi Md,
It hard to analyse the issue base on the limited information, Are there any error message on the log? Under C:\Program Files\Microsoft SQL Server\MSAS11.\OLAP\Log (this could be different for your server), there are 3 log files that are generated:
msmdrrv.log
FlightRecorderCurrent.trc
FightRecorderBack.trc
The msmdrrv.log simply points to the other two logs. There might be some detail information for this error. Please provide us the detail information about it, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support -
Hello!
I have been using Time Machine on the Time Capsule for over a month now and no problems. However when I was installing Lion it had to restart. I did not see that Time Machine was going at the time when I pushed restart until it was too late.
Now Time Machine seems to be stuck on "Preparing Backup" and "Indexing Backups". It has been nearly 20-30 minutes for Indexing and I wonder if I corrupted something or something else. If there a way I can solve this problem? Thanks!I had this same problem, this is going to sound ridiculous but this is what I finally did. I wiped my backup, crazy right?
It's there for when your hard drive crashes, so it's not like you are going to miss much if you wipe it. Tell it to stop backing up, go to disk utility, click your external and then erase it. Go back to time machine settings and reselect it as your backup drive. It will do an initial back up again and you are good to go.
Hope this helps. -
Users able to build reports and dashboards via the Web browser
Hi All,
My requiremts is "Users able to build reports and dashboards via the Web browser and perform ad-hoc queries and analysis online via the internet" .
Requesting to kindly let us me know the procedure to get resolve the above requirement.
Thanks,
KVRHi,
Go through the links below
Designing Microsoft Excel 2007 Chart
http://charts.jorgecamoes.com/how-to-create-an-excel-dashboard/
http://dashboardspy.com/dashboards/23/designing-microsoft-excel-2007-charts
SAP BUSINESSOBJECTS DASHBOARD BUILDER
http://www.sap.com/solutions/sapbusinessobjects/large/business-intelligence/dashboard-visualization/dashboard-builder/index.epx
http://www.sap.com/solutions/sapbusinessobjects/sme/reporting-dashboarding/index.epx
It may help you
Regards,
Marasa. -
The product that I purchased is not working!!!! I need help and I've been stuck in your "Contact us loop" for the last few days and I'm getting frustrated. How do I contact you for HELP!
Probably the best place to start is the right forum for your product. This is the forum for Distiller Server, a long dead product used by big companies, and probably not what you have. If you can't find the right forum, please let us know the FULL name of what you paid for (please check your invoice, as Adobe have many similar products), and we can perhaps direct you. Good luck!
-
After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?
Yes, you will still get the prompt.
I meant reset then try the recovery mode restore again.
You can also try DFU Mode.
DFU (Device Firmware Update) Mode is different than Recovery Mode.
DFU Mode is a special mode where the device can still interface with iTunes, yet it does not load the iBoot bootloader.
DFU Mode:
Plug your device into your computer.
Turn off the device.
Hold the Power button for 3 seconds
Hold the Home button without releasing the Power button for 10 seconds
Release the Power Button but keep holding the Home button
Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
NOTE: Make sure the device screen is blank and no logos are present. Be patient, it make take several trys. -
Are Flash Builder 4 and Flex 4 the same ?
Hi Everyone,
1. Are Flash Builder 4 and Flex 4 the same ?
2. Are Flash Builder 4 and Flash CS4 the same ?
Thanks,
MayGrizzzzzzzzzz wrote:
AFAIK
1. Are Flash Builder 4 and Flex 4 the same ?
Yes, flash builder 4 was the name given to what is effectively flex 4.
This answer is, essentially wrong.
Flex 4 is a Software Development Kit (SDK) that includes a compiler, a user interface framework, and a few other items.
Flash Builder 4 is an IDE that can be used to develop Flex applications. Flash Builder 4 can also be used to code ActionScript w/o any dependencies to the Flex Framework.
Grizzzzzzzzzz wrote: 2. Are Flash Builder 4 and Flash CS4 the same ?
No, Creative suite 4 is a software library consisting of many different programs
This answer is much more correct; but for additional clarification:
Flash Builder 4 is an IDE that programmers can use to develop applications for the Flash Platform.
Flash Professional CS4 is an IDE that Designers can use to create time-line based animations for the Flash Platform.
One is geared for designers; and another for programmers. In theory they can be used to reach the same end point although I wouldn't want to do application programming in Flash Professional; nor would I Want to do design stuff in Flash Builder. -
Module pool ---Problem in finding the line index for the table control
Hi Friends,
I am working in Module pool programming.
My requirement is when i select any record on the lead selection I need to find out the index of the line on which row i have selected.
Could any one please suggest me the proper solution how to get the line index for the table control in module pool programming.
Thanks
Satish RajuHi Raju,
Follow the steps
<li>U should take one variable in your internal table or in structure which is used for table control fields.
DATA :BEGIN OF itab OCCURS 0 ,
mark TYPE c ,
matnr LIKE mara-matnr ,
matkl LIKE mara-matkl,
maktx LIKE makt-maktx,
END OF itab .
controls: tabc types tableview using screen 100.
<li>This mark variable should be given in Table control properties. follow the path
double click on the table control-->attributes .->select w/SelColumn and in that give itab-mark.
<li>Flow logic of the screen
process before output.
MODULE status_0100.
LOOP AT itab with control tabc
endloop.
process after input.
module cancel at exit-command.
LOOP AT itab.
MODULE read_table_control.
ENDLOOP.
MODULE user_command_0100.
<li>read_table_control module code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."this will update the itab table
"mark field with 'X ' whatever we
"have selected on table control
ENDMODULE.
<li>If you want to Delete some of the records from Table control follow this code u2026Create one pushbutton and give Fucnction code to that and write below code
CASE okcode.
WHEN 'DELETE'.
LOOP AT itab WHERE mark = 'X'.
DELETE itab.
ENDLOOP.
ENDCASE.
I hope that it helps you.
Thanks
Venkat.O -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
How to delete the index for the business object BUS0033
Hi to all experts,
I'm applying note 1349496 the error here is no records with F4 help for the funds center .
solution from the note
Implement the attached program corrections. Then, in the transaction, delete the index for the business object BUS0033, reactivate it, and start the indexing in the indexing mode "Full". The system then displays the data correctly in the F4 search help.
how to do the second part i have already applied the note .any help
-
Why is the Star Transformation using two indexes for the same dimension?
Hi,
Recently, I have made an investigation about the Star Transformation feature. I have found a strange test case, which plays an important role in my strategy for our overall DWH architecture. Here it is:
The Strategy:
I would like to have the classical Star Transformation approach (single column Bitmap Indexes for each dimension foreign key column in the fact table), together with additional Bitmap Join Indexes for some of the dimension attributes, which would benefit from the materialization of the join (bitmap merge operation will be skipped/optimized).
The query:
select dp.brand, ds. region_name, dc.region_name
, count(*), sum(f.extended_price)
from fact_line_item f
, dim_part dp
, dim_supplier ds
, dim_customer dc
where dp.mfgr = 10 -- dimension selectivity = 1/10 --> acttual/fact selectivity = 6/10
and f.part_dk = dp.dk
and ds.region_name = 'REGION #1' -- dimension selectivity = 1/9
and f.supplier_dk = ds.dk
and dc.region_name = 'REGION #1' -- dimension selectivity = 1/11
and f.customer_dk = dc.dk
group by dp.brand, ds. region_name, dc.region_name
The actual plan:
| Id | Operation | Name | Starts | E-Rows | Cost (%CPU)| A-Rows | A-Time | Buffers | Reads |
| 0 | SELECT STATEMENT | | 1 | | 3247 (100)| 1 |00:01:42.05 | 264K| 220K|
| 1 | HASH GROUP BY | | 1 | 2 | 3247 (1)| 1 |00:01:42.05 | 264K| 220K|
|* 2 | HASH JOIN | | 1 | 33242 | 3037 (1)| 217K|00:01:29.67 | 264K| 220K|
|* 3 | TABLE ACCESS FULL | DIM_SUPPLIER | 1 | 1112 | 102 (0)| 1112 |00:00:00.01 | 316 | 4 |
|* 4 | HASH JOIN | | 1 | 33245 | 2934 (1)| 217K|00:01:29.10 | 264K| 220K|
|* 5 | TABLE ACCESS FULL | DIM_CUSTOMER | 1 | 910 | 102 (0)| 910 |00:00:00.08 | 316 | 8 |
|* 6 | HASH JOIN | | 1 | 33248 | 2831 (1)| 217K|00:01:28.57 | 264K| 220K|
|* 7 | TABLE ACCESS FULL | DIM_PART | 1 | 10 | 3 (0)| 10 |00:00:00.01 | 6 | 0 |
| 8 | PARTITION RANGE ALL | | 1 | 36211 | 2827 (1)| 217K|00:01:28.01 | 264K| 220K|
| 9 | TABLE ACCESS BY LOCAL INDEX ROWID| FACT_LINE_ITEM | 6 | 36211 | 2827 (1)| 217K|00:01:33.85 | 264K| 220K|
| 10 | BITMAP CONVERSION TO ROWIDS | | 6 | | | 217K|00:00:07.09 | 46980 | 3292 |
| 11 | BITMAP AND | | 6 | | | 69 |00:00:08.33 | 46980 | 3292 |
| 12 | BITMAP MERGE | | 6 | | | 193 |00:00:02.09 | 2408 | 1795 |
| 13 | BITMAP KEY ITERATION | | 6 | | | 4330 |00:00:04.66 | 2408 | 1795 |
| 14 | BUFFER SORT | | 6 | | | 60 |00:00:00.01 | 6 | 0 |
|* 15 | TABLE ACCESS FULL | DIM_PART | 1 | 10 | 3 (0)| 10 |00:00:00.01 | 6 | 0 |
|* 16 | BITMAP INDEX RANGE SCAN | FACT_LI__P_PART_DIM_KEY_BIX | 60 | | | 4330 |00:00:02.11 | 2402 | 1795 |
|* 17 | BITMAP INDEX SINGLE VALUE | FACT_LI__P_PART_MFGR_BJX | 6 | | | 1747 |00:00:06.65 | 890 | 888 |
| 18 | BITMAP MERGE | | 6 | | | 169 |00:00:02.78 | 16695 | 237 |
| 19 | BITMAP KEY ITERATION | | 6 | | | 5460 |00:00:01.56 | 16695 | 237 |
| 20 | BUFFER SORT | | 6 | | | 5460 |00:00:00.02 | 316 | 0 |
|* 21 | TABLE ACCESS FULL | DIM_CUSTOMER | 1 | 910 | 102 (0)| 910 |00:00:00.01 | 316 | 0 |
|* 22 | BITMAP INDEX RANGE SCAN | FACT_LI__P_CUST_DIM_KEY_BIX | 5460 | | | 5460 |00:00:02.07 | 16379 | 237 |
| 23 | BITMAP MERGE | | 6 | | | 170 |00:00:03.65 | 26987 | 372 |
| 24 | BITMAP KEY ITERATION | | 6 | | | 6672 |00:00:02.23 | 26987 | 372 |
| 25 | BUFFER SORT | | 6 | | | 6672 |00:00:00.01 | 316 | 0 |
|* 26 | TABLE ACCESS FULL | DIM_SUPPLIER | 1 | 1112 | 102 (0)| 1112 |00:00:00.01 | 316 | 0 |
|* 27 | BITMAP INDEX RANGE SCAN | FACT_LI__S_SUPP_DIM_KEY_BIX | 6672 | | | 6672 |00:00:02.74 | 26671 | 372 |
The Question:
Why is the Star Transformation using both indexes FACT_LI__P_PART_DIM_KEY_BIX and FACT_LI__P_PART_MFGR_BJX for the same dimension criteria (dp.mfgr = 10)?? The introduction of the additional Bitmap Join Index actually make Oracle to do the work twice !!!
Anybody, any idea ?!?Dom, here it is the plan with the predicates:
| Id | Operation | Name | Starts | E-Rows | Cost (%CPU)| A-Rows | A-Time | Buffers | Reads |
| 0 | SELECT STATEMENT | | 1 | | 3638 (100)| 1 |00:06:41.17 | 445K| 236K|
| 1 | HASH GROUP BY | | 1 | 2 | 3638 (1)| 1 |00:06:41.17 | 445K| 236K|
|* 2 | HASH JOIN | | 1 | 33242 | 3429 (1)| 217K|00:08:18.02 | 445K| 236K|
|* 3 | TABLE ACCESS FULL | DIM_SUPPLIER | 1 | 1112 | 102 (0)| 1112 |00:00:00.03 | 319 | 313 |
|* 4 | HASH JOIN | | 1 | 33245 | 3326 (1)| 217K|00:08:17.47 | 445K| 236K|
|* 5 | TABLE ACCESS FULL | DIM_CUSTOMER | 1 | 910 | 102 (0)| 910 |00:00:00.01 | 319 | 313 |
|* 6 | HASH JOIN | | 1 | 33248 | 3223 (1)| 217K|00:08:16.63 | 445K| 236K|
|* 7 | TABLE ACCESS FULL | DIM_PART | 1 | 10 | 3 (0)| 10 |00:00:00.01 | 6 | 0 |
| 8 | PARTITION RANGE ALL | | 1 | 36211 | 3219 (1)| 217K|00:08:16.30 | 445K| 236K|
| 9 | TABLE ACCESS BY LOCAL INDEX ROWID| FACT_LINE_ITEM | 6 | 36211 | 3219 (1)| 217K|00:08:40.89 | 445K| 236K|
| 10 | BITMAP CONVERSION TO ROWIDS | | 6 | | | 217K|00:00:32.00 | 46919 | 19331 |
| 11 | BITMAP AND | | 6 | | | 69 |00:00:34.50 | 46919 | 19331 |
| 12 | BITMAP MERGE | | 6 | | | 193 |00:00:00.58 | 2353 | 1 |
| 13 | BITMAP KEY ITERATION | | 6 | | | 4330 |00:00:00.10 | 2353 | 1 |
| 14 | BUFFER SORT | | 6 | | | 60 |00:00:00.01 | 6 | 0 |
|* 15 | TABLE ACCESS FULL | DIM_PART | 1 | 10 | 3 (0)| 10 |00:00:00.01 | 6 | 0 |
|* 16 | BITMAP INDEX RANGE SCAN | FACT_LI__P_PART_DIM_KEY_BIX | 60 | | | 4330 |00:00:00.07 | 2347 | 1 |
|* 17 | BITMAP INDEX SINGLE VALUE | FACT_LI__P_PART_MFGR_BJX | 6 | | | 1747 |00:01:23.64 | 882 | 565 |
| 18 | BITMAP MERGE | | 6 | | | 169 |00:00:09.14 | 16697 | 7628 |
| 19 | BITMAP KEY ITERATION | | 6 | | | 5460 |00:00:02.19 | 16697 | 7628 |
| 20 | BUFFER SORT | | 6 | | | 5460 |00:00:00.01 | 316 | 0 |
|* 21 | TABLE ACCESS FULL | DIM_CUSTOMER | 1 | 910 | 102 (0)| 910 |00:00:00.01 | 316 | 0 |
|* 22 | BITMAP INDEX RANGE SCAN | FACT_LI__P_CUST_DIM_KEY_BIX | 5460 | | | 5460 |00:00:08.78 | 16381 | 7628 |
| 23 | BITMAP MERGE | | 6 | | | 170 |00:00:21.46 | 26987 | 11137 |
| 24 | BITMAP KEY ITERATION | | 6 | | | 6672 |00:00:10.29 | 26987 | 11137 |
| 25 | BUFFER SORT | | 6 | | | 6672 |00:00:00.01 | 316 | 0 |
|* 26 | TABLE ACCESS FULL | DIM_SUPPLIER | 1 | 1112 | 102 (0)| 1112 |00:00:00.01 | 316 | 0 |
|* 27 | BITMAP INDEX RANGE SCAN | FACT_LI__S_SUPP_DIM_KEY_BIX | 6672 | | | 6672 |00:00:20.94 | 26671 | 11137 |
Predicate Information (identified by operation id):
2 - access("F"."SUPPLIER_DK"="DS"."DK")
3 - filter("DS"."REGION_NAME"='REGION #1')
4 - access("F"."CUSTOMER_DK"="DC"."DK")
5 - filter("DC"."REGION_NAME"='REGION #1')
6 - access("F"."PART_DK"="DP"."DK")
7 - filter("DP"."MFGR"=10)
15 - filter("DP"."MFGR"=10)
16 - access("F"."PART_DK"="DP"."DK")
17 - access("F"."SYS_NC00017$"=10)
21 - filter("DC"."REGION_NAME"='REGION #1')
22 - access("F"."CUSTOMER_DK"="DC"."DK")
26 - filter("DS"."REGION_NAME"='REGION #1')
27 - access("F"."SUPPLIER_DK"="DS"."DK")
Note
- star transformation used for this statement -
Finding output type and form for the transaction
hi all,
i have a problem finding output type and form for the transaction j1iv .actually i need to find the standard output type and form name for the transaction j1iv. how can we do it.Hi Abinash,
Go through the following steps.
1 . Go to the transaction <b>NACE.</b>
2. You will be able to see the <b>Application and description</b> tab over
there. Select the Application for which you need the output type.
3. After selecting the Application..on the top you can see the tab--
output types...click in that..here you will be able to see all the <b>output
types for that application.</b>
4. Now select a output type ..and on the left side u will be able to see
the tab for processing routines...double click on it...
5. Here you will be able to see the standard SAP program...the form
routine...the form..attached to it..
Please Reward..if helpful..
Regards,
Himanshu. -
What are the advantages and disadvantages for the larger blocksize and for
What are the advantages and disadvantages for the larger blocksize and for the smaller blocksize?
Smaller blocksize
Advantages
GoodHas relatively large space overhead due to metadata
(that is, block header).
Not recommended for large rows. There might only
be a few rows stored for each block, or worse, row
chaining if a single row does not fit into a block, for small rows with lots of random
access.
Reduces block contention.
Disadvantages
Has relatively large space overhead due to metadata
(that is, block header).
Not recommended for large rows. There might only
be a few rows stored for each block, or worse, row
chaining if a single row does not fit into a block.
Larger blocksize
Advantages
Has lower overhead, so there is more
room to store data.
Permits reading a number of rows into
the buffer cache with a single I/O
(depending on row size and block size).
Good for sequential access or very large
rows (such as LOB data).
Disadvantages
Wastes space in the buffer cache, if you are doing
random access to small rows and have a large block
size. For example, with an 8 KB block size and 50
byte row size, you waste 7,950 bytes in the buffer
cache when doing random access.
Not good for index blocks used in an OLTP
environment, because they increase block contention
on the index leaf blocks. -
Configure the tcode SCOT and SMTP for the SPM module in the R/3
Hello,
I want to know if I have to configure the tcode SCOT and SMTP for the SPM module (SAP GRC AC 5.3 SP5) in the R/3 if I want to send information toe the owner & controller.
Best Regards.
Pablo Mortera.Pablo,
This would normally be a basis function. Be very careful as this is not specific to GRC.
This will impact any external notifications using email / fax etc.
It will also depend on your version and infrastructure.
If you have web application servers, you will be able to do a lot more than if you have standard (older) application servers.
You need to create a node under the INT and assign the appropriate tcp / ip rfc connection to direct it to your email server.
You will then need to define the types of communications to be sent via that method and any appropriate email domain settings.
You also need to create and set the appropriate send jobs to run periodically which will then automatically call the rfcs to process the waiting documents.
Simon -
Return new HH4 and wait for the HH5?
I am on an Infinity exchange but still waiting for my cabinet to be upgraded so stuck on ADSL for now. I've just received the HH4 I ordered but have just noticed there is a HH5 due before xmas. Would I be better off returning the unopened 4 and waiting for the 5? Does anyone know if the 5 will be more epensive? I think I am able to re-contract with BT as I've been with them for over a year now. I can't help but feel the separate modem of the 4 would be desireable come the time I do get on Infinity.
BT support tell me they can't gurantee the availability of the HH5 come launch as it is predominantly aimed at the new 300Mbit/s users.
Thanksthere is currently no known release date for The HH5 as it is still a trial device and cannot until released be purchased
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’
Maybe you are looking for
-
How can i call a procedure from the app
hi i have an establish connection to a database (MS SQL SERVER 2000) , i can get data from the tabels by sql statments. i have stored procedure in the database , how dan i run procedure with parameters from the app. lets say i have one procedure that
-
Is it possible to change the drafting standard used by Acrobat 9 Pro Extended?
Hi All, I've seen some inconsistent behavior when converting CATIA V5R19 data to 3D PDF, specifically in regards to the appearance of PMI (3D dimensions, text, flag notes, etc) It appears that Acrobat / Adobe 3D reviewer show 3D PMI according to ISO
-
Updated mac mini with latest patch today
I just updated my mac mini with the latest patch 9/22/2012. After the update the system went into reboot then starts up again then fails and power-down. The screen changed a couple of time from dim to bright. The rolling gear is visible during the sc
-
Total novice - canon 450d - elements 6 and raw files.
Please help a total novice. I bought photoshop elements 6 a few months ago ( I have an oldish laptop and was worried it wouldn't cope with newer software) I then bought a canon 450d and started to take raw photo - elements cant read my raw files. I c
-
Macbook Air 13 vs Pro 13 resolution
I just bought the newest top end Macbook Pro 13 inch (2.9ghz) however I'm feeling buyer's remorse. Part of me desires the higher resolution of the 13 inch Macbook Air. However, my main reason for getting the pro was for legacy features and more bang