Cube Reload and rollup ?

Hello BW Experts,
I have a cube A. There are two requests Req1 and Req2. on day 1 i have loaded the req1.1 and req2.1 and rollup done for roll.req1.1 and roll.req2.1. Now i have to reload the req1.r and req2.r. so what is the procedure to be followed? and how to do the rollup for roll.req1.r and roll.req2.r
1) delete the req2.1
2) delete the req1.1
3) anything to do with the rollups of req1 and req2???
4) reload the req1.r
5) reload the req2.r
6) i am supposing the rollups is happneing automatic??? or anything to be done to do the rollups.
Q1) please let me know what i have to do in steps 3 and 6 ?
Q2)is the sequence above mentioned correct ? is there anything i am missing.
Q3) is rollup done automatically ? how to verify it ?
suggestions appreciated.
Thanks,
BWer

Hi BWer,
Q1) When you delete the requests, the aggregates are calculated again (rollup). if you reload the requests, it depends of how rollup is made, if its automatic or you should start it manually. you will see this with the requests.
Q2) the sequence seems to be correct
Q3) you can check the rollup when you manage the infocube, in the requests page, the fifth column (Rollup Status) it should have a check.
Hope it helps.
Regards,
Diego Lombardini

Similar Messages

The effect of cube and rollup function

1. For under 500,000 in Oracle 9i, rollup is faster than cube.
But above 1,000,000, cube is faster than rollup.
Right?
2. Why do rollup(a) and cube(a) all have a parameter?
3. Under only one parameter, the compute process of cube and rollup is not the same, right?
Thx.

>
1. For under 500,000 in Oracle 9i, rollup is faster than cube.
But above 1,000,000, cube is faster than rollup.
Right?
>
Rollup summarises data differently to cube, so to say one is faster or slower than the other is not a question one should consider necessarily.
The main consideration should be in what format you would like the result set to be in.
http://download.oracle.com/docs/cd/E11882_01/server.112/e16579/aggreg.htm#DWHSG8609
http://download.oracle.com/docs/cd/E11882_01/owb.112/e10935/dim_objects.htm#WBETL03002
>
2. Why do rollup(a) and cube(a) all have a parameter?
>
The parameter(s) refers to the Grouping against which the data is summarised.
The Oracle documentation states the following:
>
CUBE takes a specified set of grouping columns and creates subtotals for all of their possible combinations
>
So both rollup and cube could summarise across a group of column(s).
>
3. Under only one parameter, the compute process of cube and rollup is not the same, right?
>
Correct, depends what you want to summarise against.

Cube and rollup

How to use cube and rollup what are they exactly...

Hi,
They are aggregate functions.
Here's a nice explanation:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1512805503041
See also:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/aggreg.htm#sthref1669

Compress and rollup the cube

Hi Experts,
do we have to compress and then rollup the aggregates? what whappends if we rollup before compression of the cube
Raj

Hi,
The data can be rolled up to the aggregate based upon the request. So once the data is loaded, the request is rolled up to aggregate to fill up with new data. upon compression the request will not be available.
whenever you load the data,you do Rollup to fill in all the relevent Aggregates
When you compress the data all request ID s will be dropped
so when you Compress the cube,"COMPRESS AFTER ROLLUP" option ensures that all the data is rolledup into aggrgates before doing the compression.
hope this helps
Regards,
Haritha.
Edited by: Haritha Molaka on Aug 7, 2009 8:48 AM

How do I get the Home, Reload and Forward/Backward buttons grouped logically together, rather than splattered randomly across the top of the browser ?

In Firefox 3, all the buttons are grouped together, in V4 they are now scattered across the top of the browser, aping IE7/8 - plus the "stop loading" button has gone walkabout - it would be useful to get that back, as well.

You can open the Customize window to make it possible to change the position of those toolbar buttons.
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" 
* Drag the Home button from its current position at the right to the previous position at the left of the location bar.
* Drag the Reload and Stop buttons to their previous position at the left side of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.
See also:
* http://kb.mozillazine.org/Toolbar_customization

How can I move the tab bar to the bottom, and how do I get my reload and stop buttons back?

The new version of Firefox has repositioned my tab bar to the top and I cannot move it to the bottom. I tried about:config, but browser.tabs.ontop was already set to false - very curious, since this should have solved my problem in the first place.
In the new version of Firefox I cannot get my reload and stop buttons back again.

Firefox uses a combined Stop/Reload/Go button that is positioned at the right end of the location bar.
*You get a Stop button during page loading that changes to a Reload button when the page has finished loading
*You get a Go button if you modify the location bar content
*Middle-click the Reload button to duplicate the current tab to a new tab

I cannot get scrabble to work on my ipod touch. I've uploaded, deleted, reloaded and nothing seems to work. It asks for a password but will not let me in. Anyone else have this problem?

I cannot get scrabble to work on my ipod touch. It only works on my macbook. I've uploaded, deleted, reloaded and nothing seems to work. It asks for a password but will not let me in. Anyone else have this problem?

Hi BDAqua,
I can go to /System/Library/Frameworks/, but JavaVM.framework/Versions/A/JavaVM does not exist!
Hi Linc,
I have already downloaded that updater, and it says 'A newer version of this package is already installed'

Updating Physical Cube Tables and Hierarchies OBIEE 11.1.1.7

OBIEE 11.1.1.7
I have imported a MSAS Cube, modeled it and created a presentation layer. I now have some new hierarchies I need to add to the phyicial layer.
How do you import new Cube Tables and/or Hierarchies?
When I select the Import option it creates a new OLAP database and connection pool, I am unable to successfully move those changes into the existing OLAP Connection.
I have been through the documentation and it reccomends importing over a manual process. However I am unable to figure out how to do this with the import process.
Oracle® Fusion Middleware Metadata Repository Builder's Guide for Oracle Business Intelligence Enterprise Edition
11g Release 1 (11.1.1) Part Number E10540-05
Chapter 8 Working with Physical Tables, Cubes, and Joins
There is a section called Working with Multidimensional Sources in the Physical Layer, in this section is says
"Each multidimensional catalog in the data source can contain multiple physical cubes. You can import the metadata for one or more of these cubes into your Oracle BI repository. Although it is possible to create a cube table manually, it is recommended that you import metadata for cube tables and their components"
The New Utilities feature(s) is really cool, but it doesn't work for OLAP connections.
Any help is greatly appreciated.

Hi Michael,
it works, but its a bit tricky. I did it with Oracle OLAP and I think it must be similar with other OLAP Databases.
Rename your existing Database in Physical Layer to the name Metadata Import dialog would create. With Oracle OLAP the "Data Source Name" ist used. Just try it once.
Unfortunately you can not merge dimensions and cubes as it is with relational Objects . So you have to delete the cube and dimensions you will import from you renamed Database in Physical Layer. Of course the mapping between physical and business model will be lost
Now you can import your modified OLAP-Cubes and Dimensions and it should be placed in your renamed Database in Physical Layer
Open the sources of your logical tables in business model and add the Dimensions or Cubes in the "General" Tab. Move to the Tab "Column Mapping" and check if mapping is OK. If not (this will be the case, if you customized the column names), you have to do the mapping from the scratch .
I recommend to use the original names from the data source. If you need another name for a column, just create a new logical column and use "Derive from existing columns". Now you can reimport OLAP Metadate quicker because the Mapping is done automatically.
Hope this helps
Regards Claus

Pearl 8120: USB keeps reloading and reloading

I installed a MicroSD and now when I plug in my phone into the USB, the USB will load. However, it will keep reloading and reloading the drive making it impossible for me to transfer files using both the Mass Storage mode using 'My computer' or Roxio Media Manager. I tried changing the settings for Media card for auto enable mass storage when connected to 'yes', 'no', and 'prompt' but it still just keeps reloading, leaves the drive alone for 5-45 secs then reloads the drive. BTW, this is when I have both the desktop manager on and off. I have a feeling it has to be something with the mass storage mode because it worked fine before I put a micro SD card in it. Anyone else have this problem? Any solutions? Any Ideas?

Your OS .52 is quite old... upgrade.
Download and instructions are in this link. Pretty simple process. Just do your own backup FIRST, using Desktop Manager.
http://www.blackberryforums.com/general-8100-series-discussion-pearl/211527-latest-os-8120-4-5-0-302...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

When I'm on safari trying to put my email in for a sample the page keeps reloading and won't stop

When I'm on safari trying to put my email in for a sample the page keeps reloading and won't stop

Did you try a reset?
Restore?

Flex Cube - Deposits and CASA documentation

Flex Cube - Deposits and CASA documentation: someone could help me to find documentation and information about CA SA and Deposits Flex CUbe MOdule ? Thanks.

IOS4 reloads and repopulates all emails when entering Mail app

I'm having similar, but somewhat different issues with my email since updating to ios4 on my 3GS. I haven't been able to find others with the exact same problem, hence the new thread.
Here is the issue:
Since upgrading, every now and then randomly, when I enter the mail program, it will start to _re-populate/re-load all of my emails from scratch_, as if my 2 email accounts were just created and I am going into it for the first time. I will see "downloading 400 messages" (I set it to 200 maximum for my 2 email accounts). My 2 email accounts are set up as enterprise -- one is Gmail Enterprise and one is my work account.
Needless to say, this is not only a HUGE battery drain but populating 400 messages is painfully slow not only on WIFI, but can completely cripple the phone on 3G. It takes about 20 minutes EACH TIME for all of my folders/inboxes to reload and populate with all of my emails, finish indexing and and threading.
This is a MAJOR issue, Apple. Email is at the heart of how I, and most people these days, communicate with friends and coworkers.
Is anyone else experiencing this?

YES, YES, YES, TomLapple! I have been having the EXACT same problem as you! My phone and mail worked just perfectly fine until Apple decided that it needed to update the software. Everything has just gone south since I've upgraded.
I have set up my work email on my iPhone 3G and since the update, it downloads literally EVERY SINGLE EMAIL in my account - including emails that I started receiving since July 2007 when I first started working for the company. Yes, I said 2007. That means that anytime I open up my mail on my iPhone, it says that there are more than 4,000 emails to be downloaded. I have actually (stupidly) started the process of trying to download and delete them all several times. A couple of times I've deleted them down to 2,000 and today managed to get down to around 900. What happens? For some strange reason, the phone appears to stall and blinks off, going straight to the black screen with the silver apple. When the phone restarts again, I go back to my email and what is waiting for me but all 4,000+ emails. I am so frustrated I want to pull my hair out. Does anyone have any idea how to stop this problem? Many people have said that restoring the phone does nothing to help.
I've also noticed that my battery can no longer take me through the day. That really upsets me because I could charge once in the morning and it would be fine until I got home that evening. Now the battery is drained within hours, even with me doing exactly what I've been doing in the past. Call me crazy, but I almost feel as though Apple is deliberately making this hard for everyone so they'll want to upgrade to the iPhone 4. Apple, MAKE SOME PATCHES TO SOLVE THIS PROBLEM!!!!!!!!!

I got a vius and after removing Pro would not work, trying to reload and getting Error 1334, can someone advise me how to fix.

I got a vius and after removing Pro would not work, trying to reload and getting Error 1334, can someone advise me how to fix.

I downloaded, ran and restarted, tried to install Pro got same error
Thank You!
Robert W. O'Rourke
Tesla Systems, Inc.
<phone # removed - kglad>

I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?

I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?

You are seeing the message because the new AirPort Extreme has some specific System Requirements:
http://www.apple.com/airport-extreme/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
AirPort Utility 5.6.1 in Snow Leopard may or may not work correctly with the new Extreme for all functions. As long as things are working OK for now, you can probably leave them "as is" and wait for another Mavericks update to fix some issues before you "upgrade".
If you have an iPhone or iPad, you could use that to administer any settings changes on the new Extreme.

Where is the reload and stop icons?

''''''Where are my reload and stop icons???''''''

See --> https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36#w_what-happened-to-the-back-forward-refresh-and-home-buttons
In Firefox 4 and newer versions, the Go, Stop and Reload buttons are combined in one button at the right end of the URL or Address bar. The button changes depending on the activity:
*green Go arrow when typing in the address bar
*red Stop ("X") button while page is loading
*gray Reload (circular arrow) when page is finished loading.
Separate buttons are possible:
#Open Customize Toolbar window by clicking Firefox button > Option > Toolbar Layout '''''OR''''' clicking View > Toolbars > Customize if using the Menu Bar '''''OR''''' right-click in an empty space on a toolbar and choose Customize
#While the Customize window is open, Stop and Reload buttons will show separated between the address bar and the search bar
#While the Customize window is open, drag the buttons anywhere on the Navigation toolbar
#*order Reload-Stop will combine into one button
#*order Stop-Reload will remain separate buttons
#*or drag a "Separator" from the Customize window between Reload-Stop and they will remain separate
#click Done at bottom right of Customize window to finish
See: https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''

Cube Reload and rollup ?

Similar Messages

Maybe you are looking for