Cube Service Documentation
The SBOP_Config_Server_Help lists the parameters for each of the methods for CubeServices. It does not describe what values can be put in these. In many cases methods that work in WSNavigator fail when run from Xcelsius CubeServices. In some other cases the methods don't seem to work in either environment. Without documentation there is no way to be certain whether this is a result of bugs in the system or bacuase I am not calling the method correctly.
Is there any documentation on these methods?
Has anyone used these?
Cliff
Thread closed with no replies
Similar Messages
-
Remote Cube (Service-InfoCubes)
Hi All,
can anyone explain me how to make a Remote Cube (Service-InfoCube) to extract data from an Oracle-System.
Thanks,
MuammerHi Roberto,
thank you for the fast answer. I have read this before but i don't understand the needed steps on the Oracle-System.
Hope anyone can help me...
Thanks
Muammer
Message was edited by:
Muammer Kizilaslan -
SAP ME 5.2 Web Services Documentation required
Hello Everyone,
With reference to the existing thread on the url SAP ME Webservice Documentation?,can i find the mentioned additional SAP 5.2 Web Services documentation,if so please share the link of the same.
Thanks,
Rajiv KumarRajiv,
This document is delivered within SDK training package for SAP ME.
Regards,
Sergiy -
SAP J2EE Engine 6.40 Web Services Documentation & Samples
Where can we find the J2EE Engine 6.40 as well as ABAP Web services documentation as well as the sample applications?
Thanks in advanceHi Vladimir
Please check the following links
J2ee engine webservices
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f76f9f90-0201-0010-bf84-d0409ea425f1
ABAP webservices
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/244e7923-0a01-0010-5887-fe0b0c6dbb8d
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices
/people/durairaj.athavanraja/blog/2004/09/20/consuming-web-service-from-abap
/people/thomas.jung3/blog/2005/05/09/abap-webservices-logon-language-processing
Hope it helps
Regards -
GroupWise 8 Web Services Documentation
We are in the process of updating the GroupWise 8 Web Services documentation. Until the GroupWise 8 changes have been merged into the current GroupWise 7 documentation, we thought it would be good to give you the updates for GroupWise 8.
You will find this update at: ftp://ftp.novell.com/outgoing/GW8WS.zip
Files or directories of interest:
GW8 - SOAP Documentation.pdf - Changes from GroupWise 7 to GroupWise 8.
WSDL and schemas\GW8 - GroupWise 8 WSDL and schemas
clients\Java\JAX-WS - Sample client of latest Java technology for Web Services
800\WSDL and schemas\GW8\Differences - GW703 and GW8 - Schema differences between GW7 and GW8
Missing at this time:
- Documentation on WSDL and schemas\GW8\archive.wsdl
Let me know if you have questions, comments, or suggestions.
Tim Draper
GroupWise DevelopmentHere is a response about the availability of the documentation:
The documentation is currently posted here:
http://developer.novell.com/document...a/bktitle.html
We're currently working with Richard Smith to get a link to this page from
Novell Developer Kit page
(http://developer.novell.com/wiki/ind..._Developer_Kit)
Hope that helps.
-Luke
>>> On Tuesday, January 05, 2010 at 4:29 AM, Preston
Stephenson<[email protected]> wrote:
> Sorry, the documentation went to a new writer.
> I'm try to track down the status of the document.
>
>>>> On Monday, January 04, 2010 at 7:26 AM,
> ecmwise<ecmwise@no‑mx.forums.novell.com> wrote:
>
>>>> Documentation on WSDL and schemas\GW8\archive.wsdl
>>
>> Is the documentation for archive.wsdl and archivexsd. now available?
>>
>> Best regards
>> Gregor -
Jdeveloper Web Services Documentation
hi , i'm developing web services using jdeveloper 10g , these web services are an application modules web services , i'm writting a full java documentation for the methods in my application modules classes , when i generate the web service , the methods "service" documentation is not included in the generated wsdl file ,
how i can show this documentation in the wsdl file , to make it easier for those whose viewing the web page for that service to see a clead description of the service ????Hi,
any news on this since last year? Or any other solutions to do it automatically?
It would be essential to have the WSDL documented by automatic generation from javadoc or even from PL/SQL comments when using PL/SQL web services.
At least / besides, a tool/dialog in JDeveloper would be nice which substitutes manually inserting a lot of documentation tags.
Regards,
Patrik -
I have enabled cube service Web Service over PAS in a VMWare image using NEtweaver 7.2. I then created a simple Xcelsius call of one of the Cube Service methods. The fact that the methods are available for me in Xcelius would indicate the Web Service is working correctly. However when I attempt to preview theflash I am prompted to add the file and source to the Adobe Global Security settings. I do this but when I retry the preview I get the same prompt again.
To ensure there was nothing in my VMWare image that was preventing access to the Adobe Global Security settings I then opened another Webservice Xcelius flash that read data from the external Internet. After adding this second flash to the Adobe Global Security settings it worked fine whereas I have not been able to get the PAS sourced flash file to run.
Has anyone used this service before? Can anyone offer tips?Thread closed with no replies
-
SRM7 - eSOA service documentation
Hi all gurus,
we're using SRM7 on our testing system and we enabled distribution of contracts to the backend test system using the new eSOA technology. I'm completely new to this kind of procedure; we've seen that the contract distributed are definitely wrong on the backend (e.g. service hierarchies are flattened, service lines have been "locked", and so on) and looking on the SRM system in sxi_monitor tx I can easily check that the XML itself is not correct.
Here are the questions:
- where can I get detailed documentation about this new service, from beginning to the end (SRM creation of XML -> XML sending -> backend receiving -> BAPI ? (I suppose) to create the document) of the process?
- specifically, what's the part of code (FM, methods) in which is defined how to convert the SRM document into an XML file? This should be the point in out task, since it seems that contracts are badly converted into the XML message...
Thanks everyone for the hints and suggestions you might give
EDIT: the problem seems to be related to contracts with service hierarchy... is there feature not supported by standard actually by now? Is there any workaround available? Thanks again
Edited by: Matteo Montalto on Dec 10, 2009 3:09 PMHi Matteo,
Did u get any documents for ur problem (Creation of XML messages in SRM). I would be greatful if u could share those with me.
Even I am looking for the same as we wish to configure service procurement using ESOA.
Pl let me know if u have the documents for ESOA.
Cheers,
Nikhil -
MDM 5.5 SP04 Java API and Web Service Documentation
Is there documentation available that reflects the SP04 changes to the Java API, and the web services that are now available?
As of this morning, service marketplace contained spotty SP04 docs.
Thanks in advance,
MikeMike,
A cookbook would be wonderful (I think our developers would throw a party)!
An updated object model (as a preface to the user guide) for the legacy API (MDM4J.jar) AND the new "rebranded" API (mdm-*.jar) would also work.
I've been reduced to comparing the SP3 & SP4 javadocs
One fun approach that appears to be working for us, is to model each process using the DataManager, and try to duplicate that exactly via the corresponding API objects (e.g. the simple Connect-Find Table-Search Table-View Result Set-View Record-CheckOut/Upsert/Validate/CheckIn dance). New features in the DataManager reveal themselves a little more readily
Good luck,
...Dee -
Web Service Documentation EmployeeMasterDataReplicationRequest_In
Hello All,
I'm working in an integration between SAP HCM and Success Factors Employee Central (EC).
I want to review the documentation of the SAP HCM inbound service EmployeeMasterDataReplicationRequest_In but I'm not able to find it any where.
Could you please help me point where I can find it? I'm looking for the general documentation about Request/Response Messages and parameters.
Thanks!
FelipeHi,
Plese find below service market place link below
https://websmp209.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=501100035870000015092&_HIER_KEY=601100035870000179414&_HIER_KEY=601100035870000222244&_HIER_KEY=601100035870000235182&_HIER_KEY=701100035871000565647&_OBJECT=011000358700000709862011E&_SCENARIO=01100035870000000112&
Thanks,
Ramesh -
Best Practices for JMS Service Documentation
Our software consists of a variety of JMS producers and consumers used to transform and transmit business to business messages on a large scale.
The service nodes do a variety of things, and we've had trouble over the years ensuring every queue-based service clearly identifies the parameters and payload it accepts, so that everyone from programmers to system administrators can easily see what services are available and how they are to be used.
Some have advocated always adding a web service in front of each message-based service to guarantee interface contracts are all well publicized. I think there are reasons to choose web services and reasons to choose message-based services, and am not convinced this is the right answer to address limitations in expressing the design contract for a message-based service. That said, I really like what we've been able to do with self-documenting web services based on annotations, and wonder if there's a conceptual equivalent in message-based software.
What are your best practices for ensuring your message-based services are as self-documenting as your modern web service?
Thanks in advance for your advice!
Edited by: lsamaha on Apr 16, 2012 11:46 AM*bump
-
Where is the "Push" service documentation.
Does anyone know where to find documentation about the Apple "fix" to the background application restriction with a push service, mention here:
http://www.appleinsider.com/articles/08/06/09/appletackles_iphone_background_app_limits_with_pushservice.html
Thanks in advance.Ouch this hurts !
So at this point there is no way to create an application that changes the icon (a la default Calendar application) based on information retrieved from the network every so often right?
No background services allowed, and no push notification service.
Is this correct?
Any one know what "in the future" means?
(me crying ... ) -
Web Service documentation for all Web Services
Hi,
In March there was a documentation released named "Shop Floor web service field guide".
Unfortunately this only documents a few of the available Web-Services.
I would like to know where I can find:
1) Documentation for other web-services that were part of previous DataExchange XML.
Like BomProcessingInBinding, ItemProcessingInBinding.
2) Updated document for "Shop Floor web service field guide" since I only have the first version. Or information
if there has been no updating. Can't seem to find this document when searching in SAP Support Portal.
Br,
JohanHi,
Plese find below service market place link below
https://websmp209.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=501100035870000015092&_HIER_KEY=601100035870000179414&_HIER_KEY=601100035870000222244&_HIER_KEY=601100035870000235182&_HIER_KEY=701100035871000565647&_OBJECT=011000358700000709862011E&_SCENARIO=01100035870000000112&
Thanks,
Ramesh -
Discoverer web services documentation
Hi again,
is there any documentation we can read on using discoverer's web services?
Patch 5648158 by the way.
I'm trying to use them but some variables don't make since. For example:
<sKey xmlns:ns1="http://oracle.discoverer.applications.ws/IWsi.xsd"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ns1:oracle_discoverer_applications_ws_model_bean_SessionKey">
<key xsi:type="xsd:string">String Value</key>
</sKey>
Where do I find the session key?
Also:
<SSOUsername xsi:type="ns1:oracle_discoverer_applications_ws_model_bean_SSOUsername">
<user xsi:type="xsd:string">String Value</user>
</SSOUsername>
<guid xsi:type="ns1:oracle_discoverer_applications_ws_model_bean_GUID">
<id xsi:type="xsd:string">String Value</id>
</guid>
The username is the one I created when I configured the web services as per the documentation? Where do I find the guid?
ThanksSo it sounds like you have already done the WSI setup for Discoverer because you get the list of services - right?
You're supposed to integrate the web services with an SSO user, which ideally would be the same userid you used when you set up the web services. When you do something like this:
http://myserver.mydomain.com:7778/discoverer/wsi
you should get prompted for your web services user. That is not SSO and you need to set up one of those too. Having enabled an SSO user, Discoverer demands that there be at least one Public connection against which some workbooks have been made available.
You cannot make the web services work unless you are running a full-blown application server, complete with SSO enabled for Discoverer with at least one Public connection. As far as I know, Private connections cannot be used, neither can direct logins.
If the above login works and you sucecssfuly authenticate the next thing you should see is a screen entitled wsi endpoint with a listing of the available services, such as getWorksheetList, login, getWorkbook and so on.
I will presume you are getting this far.
When you click on, for example, login, you should see something like this:
<aUserCredential xmlns:ns1="http://oracle.discoverer.applications.ws/IWsi.xsd"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:type="ns1:oracle_discoverer_applications_ws_model_bean_UserCredential">
<SSOUsername xsi:type="ns1:oracle_discoverer_applications_ws_model_bean_SSOUsername">
<user xsi:type="xsd:string">String Value</user>
</SSOUsername>
<guid xsi:type="ns1:oracle_discoverer_applications_ws_model_bean_GUID">
<id xsi:type="xsd:string">String Value</id>
</guid>
The one above is from my own installation which as you can see also has the references that you mentioned:
http://www.w3.org/2001/XMLSchema and GUID
Mine is integrated with BI Publisher and so BI Publisher is providing the information that is needed to then successfully log on. I am not sure exactly what values are being passed to the parameters because these happen behind the scenes.
Best wishes
Michael -
Customer Service Documentation
Hi All,
Can any body provide documentation on step by step implementation of Customer Service Module in SAP R/3. Customer want to set up CS Module for their product (Consumer Electronics).
Do revert at the earliest.
Thanks
MaheshHi Rehman,
Please can u provide some other good document in which the overview of CS is written that what CS is all about what it do?
Thanks & Regards,
Mohsin
Maybe you are looking for
-
Bouncing down to new track - mono!!
Hi - I'm using CS5.5 for Mac and I want to be able to bounce edited, joined, multi-clips to new tracks in mono. The original tracks are all mono - but the bouncing function always produces a new track in stereo. Is there a setting somewhere that I'v
-
How to pass javascript variable to jsp function
i want to check which table header (that is <th> in html )is clicked and based on that a jsp funtion do a query in database and should show records in sorted way according to which column head is clicked. Table is created in html. My function is Vect
-
Amber light not working on mute button
Hi. Have a Hp pavalion g6 2207 tx. And my operating system is windows proffional 64 bit. my mute button amber LED is not working ever since I updated my sound driver. plz help. m
-
Hello, I'm from Bulgaria and i have very slow internet connection. So it is imposible to download any file > 10MB. What can i do ? Is there any ftp server from where i can resume my downloads? Thanks Best regards, Atanas Oreshkov So that we may bette
-
Is this covered in the limited hardware warranty?
So I droped my iPod today and somehow I bent the metal back of the thing but did not break the glass. The glass is now overhanging the metal in one corner and I can see into the device. It still works perfect, but I dont want the screen to eventually