Cube to Cube - Data Question...any help

Actuals cube is feeding a Planning cube using Gen Exp DS functionality.
In the update rules all possible mappings are made.
After loading Actuals, Planning Cube has data like 
Employee/Request ID/Amount
123/APOXXX/1000$
100/APOXXX/1993$
100/DTPXXX/1992$
102/APOXXX/1800$

Data in Actuals Cube
Employee/Request ID/Amount
100/DTPXYZ/1992$
119/DTPXYZ/1900$
120/DTPXYZ/1962$
After loading, Planning cube has data of Actuals for only those employees which have Planned costs...just like Emp 100 frm above example, there were no actuals found for Emp 119 & Emp 120 in the planning cube ( some actuals data is not going into the planning cube )!!!
No selection criteria in the Infopackage.
Comment SDNer's...
Message was edited by:
Jr Roberto

Can u please explain your problem in more detail. This will help us to think on it.
Regards,
Mahendra

Similar Messages

HT1600 I have an apple tv about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

I have an apple tv about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

If you can view the main home screen, try selecting "settings" on the far right, then choose recent at the bottom. If not, try just unplugging power for a few minutes, then plug in and try again. Keep in mind you'll need a wireless connection and there may be several updates. Hope this helps-

Ipod 5th gen stuck in recovery mode. Don't want to restore and lose all my data. Any help would be greatly appreciated.

ipod 5th gen stuck in recovery mode. Don't want to restore and lose all my data. Any help would be greatly appreciated.

I one of these programs will not kick the iPod out of recovery mode you will have to restore the iPod.
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
You may be able to get some info off the restored iPod by:
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
-iPod touch Deleted Photo Recovery Tips You Should Know
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Cube to Cube "Error in data Selection" plz help

Hi this is Ajay Reddy
when am sending data from Cube to Cube am getting an error
"Error in data Selection" plz help

Hi,
It needs a Note implementaion. I got similar problem in version BIW 7 and SP 11. We got the solution with on of the note . I am not able to recollect the note number.
Any way check the notes 920971,155471 may help you or not.
With rgds,
Anil Kumar Sharma .P

Data mart cube to cube copy records are not matching in target cube

hI EXPERTS,
Need help on the below questions for DATA Mart-Cube to cube copy(8M*)
Its BW 3.5 system
We have two financial cube.
Cube A1 - Sourced through R/3 system (delta update) and Cube B1- Sourced through A1 cube.(Full update). These two cubes are connected through update rules with one to one mapping without any routines.Basis did a copy of back-end R/3 system from Production to Quality server.This happened approximately 2 months back.
The Cube A1 which extracts delta load from R/3 is loading fine. but for the second cube, (extraction from previous cube A1) i am not getting full volume of data instead i m getting meagre value but the loading shows successful status in the monitor.
We tried through giving conditions in my infopackage (as it was given in previous year's loading) but then also its fetching the same meagre volume of data.
To ensure that is it happening for the particular cube, we tried out in other cube which are sourced thro myself system and that is also getting meagre data rather than full data..
For Example: For an employee if the data available is 1000, the system is extracting randomly some 200 records.
Any quick reply will be more helpful. Thanks

Hi Venkat,
Did you do any selective delitions in CUBEA1.
first reconcile data cube1 & cube2 .
match totals of cube1 with cube2.
Thanks,
Vijay.

Cube Performance and Data Explosion

Hi Experts,
One of the parterns developed a data warehouse application. And the DW application has some performance issue:
when the report get the query of the high level dimensions, the performance is okey, and when the query get the very detail data in the cube, the performance gets bad.
The aggregations and the detail data are all stored in the cube, and the cube data gets Explosion quite quickly since some detailed transaction data need to be queried and stored in the cube too.
So, experts, do you have any good suggestion on this issue? or if the may be a better design for the cube? e.g. in DW, the cube only stores the aggregations or summary on coarse grained data and measure, for fine grained data , it can be got in ODS.
another question, I google the architecture solution for the above issue, and someone said that if the DW is designed in a hypercube, there maybe data explosion issue, but instead of desinging the hypercube, multicube should be used, so I wonder if multicube can solve the data explosion issue, and how to solve it. And if the multicube has better performance than the hypercube or can also solve detail data query.
Last question, do you have any experience on DW implementation on TB level Data, and any good suggestion for architecture design using Oracle OLAP or Essbase for good performance.
Thanks,
Royal.
Edited by: Royal on 2012-11-4 上午4:01

You have not asked any specific technical question. In my opinion all Oracle Datawarehouses should use Oracle OLAP option for the Aggregation strategy. Significant improvements in 11.2.0.2 (and later versions) have been made. It has become much easier now to create and maintain dimensions/cubes. On the reporting side, OBIEE 11g now understands OLAP metadata. Other reporting tools can use the CUBE_TABLE views.
Here are some links that you may find useful.
Comparing MVs and OLAP... Oracle White paper
http://www.oracle.com/technetwork/database/bi-datawarehousing/comparison-aw-mv-11g-twp-130903.pdf
Oracle OLAP Support page
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1107593.1
Three demos done by OLAP Development which explains how OLAP can help in a DW.
http://download.oracle.com/otndocs/products/warehouse/olap/videos/intro_part_1/OLAP_Features_and_Use_Cases_1.html
http://download.oracle.com/otndocs/products/warehouse/olap/videos/intro_part_2/OLAP_Features_and_Use_Cases_2.html
http://download.oracle.com/otndocs/products/warehouse/olap/videos/intro_part_3/OLAP_Features_and_Use_Cases_3.html
Main OLAP page at Oracle OTN site
http://www.oracle.com/technetwork/database/options/olap/index.html
Recommended Releases for Oracle OLAP
http://www.oracle.com/technetwork/database/options/olap/olap-certification-092987.html
Accelerating Data Warehouses using OLAP option
http://www.oracle.com/technetwork/issue-archive/2008/08-may/o38olap-085800.html
What's new in 11.2.0.2 database OLAP option
http://docs.oracle.com/cd/E11882_01/olap.112/e17123/whatsnew.htm
Oracle 11.2 OLAP Documentation (scroll down to OLAP section)
http://www.oracle.com/pls/db112/portal.portal_db?selected=6&frame=#online_analytical_processing_%28olap%29
Excel reporting from OLAP using Simba tool. This was developed in partnership with Oracle.
http://www.simba.com/MDX-Provider-for-Oracle-OLAP.htm
There is a good demo for Simba Excel tool at:
http://www.simba.com/demos/MDX-Provider-for-Oracle-OLAP-web-demo.html

Update data from cube to cube in BW 3.5

Dear Experts,
Can we update data from one cube to another cube in BW 3.5. i tried it, I created the connection between two cubes as i did in ods to cube through update rules but there is no option like in ods to send the data(update dso data to data targets).Please help me on this.

hi arvind,
Thanks, but i have some doubt again, i did it and also data transfered to the second cube, but after creating the connection i went to bi7 in infosource and there i found that cube name starting with 8(cube name), but my question is can i do it in bw3.5 without going to rsa1.

Cube to cube data transferred ,and delta status

Hi Gurus
I need to do Portioning in cube
I have a cube Zaa_c01 which is updated by two data source ZDS1 and ZDS2 (Delta Update) I copy the Zaa_c01 and I created new cube Zaa_c02, also I transferred the data to that. But it is shoeing in single request in cube, after partion I again reloaded to ZAA_C01 , know I am seeing only single request in a cube.
Whether I lose delta in this case , or I am missing any step, this activity I done in Development, and need to do in production.
Regards
Shashi

Hai Shashidhar,
Partitioning is split the large dimensional cube into smaller cubes.... regarding performance point of view we have to do this partitioning.
there are two types of partitioning..
1. Logical Partitioning.
2.Physical Partitioning
physical partitioning is done at Database level . and logical partitioning done at Data target level.(EX: Info cube level)
Cube partitioning with time characteristics 0calmonth Fiscper is physical partitioning.(so, we need at leats one of the above time charecterstics for doing partioning...).
Logical partitioning is u partition ur cube by year or month that is u divide the cube into different cubes and create a multiprovider on top of it.
STEPS :
SELECT YOUR CUBE.. AND DOUBLE CLICK IT..->
in the menu's select EXTRAS menu--> in that select -->DB PERFORMANCE sub menu..-> in that again select Partitioning sub menu..
and specify how many partions you want to do...
but you cube should be contain atleast ocalmonth or phical varient should be there...
Prerequisites
You can only partition a dataset using one of the two partitioning criteria calendar month (0CALMONTH) or fiscal year/period (0FISCPER). At least one of the two InfoObjects must be contained in the InfoProvider.
http://help.sap.com/saphelp_nw04s/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
Thanks,
kiran.

How to tune performance of a cube with multiple date dimension?

Hi,
I have a cube where I have a measure. Now for a turn time report I am taking the date difference of two dates and taking the average, max and min of the date difference. The graph is taking long time to load. I am using Telerik report controls.
Is there any way to tune up the cube performance with multiple date dimension to it? What are the key rules and beset practices for a cube to perform well?
Thanks,
Amit

Hi amit2015,
According to your description, you want to improve the performance of a SSAS cube with multiple date dimension. Right?
In Analysis Services, there are many tips to improve the performance of a cube. In this scenario, I suggest you only keep one dimension, and only include the column which are required for your calculation. Please refer to "dimension design" in
the link below:
http://www.mssqltips.com/sqlservertip/2567/ssas--best-practices-and-performance-optimization--part-3-of-4/
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

How to add a new field in the cube and load data

Hi,
The requirement is
We have ZLOGISTICS cube , the data souce of this filed has REFDCONR-reference dcument number filed . We have to create a new field in cube load data and get this new filed into the report also.
Please any one can help me with the step by step process of how to do?
How to get the data into BW and into the report.

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Data load taking very long time between cube to cube

Hi
In our system the data loading is taking very long time between cube to cube using DTP in BI7.0,
the maximum time consumption is happening at start of extraction step only, can anybody help in decreasing the start of extraction timing please
Thanks
Kiran

Kindly little bit Elaborate your issue, Like how is mapping between two cubes, Is it One to one mapping or any Routine is there in Transformation. Any Filter/ Routine in DTP. Also before loading data to Cube did you deleted Inedxes?
Regards,
Sushant

Cube Partition and Date

Hi,
I have a cube which has data from 2000 till now. The data from 2000-2007 is very less.
But for 2008 and till may 2009 we have huge data
So we decided to partition the cube on Fiscal Year/Period with 1252( 12 for 2008, 5 for Jan 2009 till may 2009 and 1 for 2007 and below and 1 for June 2009 onwards)
Now My question is how would we give the data range?
Can anyone please tell me?
Regards

Hi AS,
Suggest you to partition until October/December 2009, so that you wont have to repartition again immediately(reduce administrative effort).
For your partitioning request.
Fiscal year/period - 001/2008 to 005/2009.
Maximum number of partitionins - 19.
Check Features subtopic in this link for further details
[Partitioning exmaple|http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
Hope it helps,
Best regards,
Sunmit.

AWM maintain CUBE not refreshing data

Hi,
I have refreshed the data that feeds my CUBE and it seems as if AWM is not deleting old CUBE data, when I view the source table for the CUBE in the mapping I can see there is only 1 row but after I maintain CUBE and tick the delete dimension members checkboxes and run process immediately in this session the original data exists. Any help appreciated.
Cheers,
Brandon

hello brandon,
my solution is quite awkward but it works:
you have to maintain the cube's measure data where the result would be 0 processed data(wierd huh?).
To do that you, you can empty one of the dimension's data(members) by emptying the table/view that it is mapped to, giving you a memberless dimension. Then maintain the cube's measures(do not include dimensions). This will give you a result of 0 processed data, and all records are rejected, all the while emptying the cube.
Then fill back the table/view that is mapped to the memberless dimenstion with data again so it will have its members back when you re-maintain it, then maintain cube data again.
There's probably a more elegant solution out there, but this one works for sure.

Using an SAS2008 Cube as a data source for BI Publisher errors

Hi All,
I am trying to use a SAS 2008 cube as a data source for a report in BI Publisher. When I defined the data source under the admin section I gave it the following details:
Data Source=ntsasqa01;Provider=msolap.3;Initial Catalog=WWPR_SMG
With a username / password that has access to the cube.
When I try and test the connection the OC4J instance stops running and the test does not finish or error. If I use the data source and then setup a report and then try and view data I get an error like the one below:
/app/oracle/OracleBI/xmlp/XMLP/Admin/DataSource/msmdacc.dll ( 0509-022 Cannot load module /app/oracle/OracleBI/xmlp/XMLP/Admin/DataSource/msmdacc.dll.
0509-103 The module has an invalid magic number.)
I am not sure if the error is related to the initial issue of not being able to complete the test.
I need to find a solution though as I have to make use of MDX to access the cubes.
Please could someone give me some advice.
Thanks,
Kim.

Hi Kim
1. SAS cubes are not currently supported - http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10417.pdf. Unless SAS cubes can use the MS drivers?
2. If you try and pursue it you might check the permissions on the ddll in the error to ensure you have rights over it.
Either way you are not supported with a SAS cube so you are kinda on your own. Sorry I dont use SAS so Im not going to be much help other than stating the obvious :0)
Regards
Tim

OLAP cubes from heterogeneous data sources using XML DB

hi.
Q:1
How we can create an OLAP cube (XML cubes) from XML data sources if using XML DB.
Q:2
How we can create an OLAP cubes from warehouses and flat files and covert these cubes into XML cubes.
Q:3
Is there any other tool (Except Analytical workspace manager AWM) which supports the construction of OLAP cubes in XML format from heterogeneous data sources?
Edited by: user11236392 on Aug 21, 2009 3:50 AM

Hi Stuart!
Your undersatnding is partially correct. i am working for providing an architecture for XOLAP, XML is one of my data source.
The idea is to generate uniform cubes from heterogeneous sources that can be integrated into a global cube. instead of building Oracle OLAP cubes from all the sources (this work is already done) i want to generate an XCube from XML data sources using XQuery.
On the other hand if we have generated the Oracle OLAP cube from other sources like warehouses or flat files. i have to convert these Oracle OLAP cube into XML cube for uniformity. in an research paper i find that there is an operator Xcube embedded in XQuery which converts the multidimensional data (cube) into XML cube. im looking for the implementation of this operator in Query that how this operator works.
hope u understand my architecture. but if u still have some confusion, kindly give me ur mail id. i will mail the diagram of my architecture.
thanks.
saqib

Cube to Cube - Data Question...any help

Similar Messages

Maybe you are looking for