Cube to cube datamart in 3.5

I have built a cube to cube datamart and cannot determine how to initiate the load. When building a datamart with an ODS as the source, it is quite obvious (right-click ODS and select Update ODS Data in Data Target). However, this option does not exist in the case of a cube.
It's a one-time load of some historical data. I don't require scheduling of deltas. Just a single full load.I do however need selectability on a date field to exclude recent data.
Can someone please advise how to initiate this data load?
Many thanks,
Brett

Hi,
Go to the infosource tab in the RSA1 and search for 8(your infocube technical name).
Eg: if your source infocube 0tct_01 then search for 80tct_c01.
Create an infopackage on the 8.* ICtechnical name and schedule the load. This will load data from your source IC to Target IC.
If it is not clear please let me know.
Thanks
Santosh R C

Similar Messages

Inventory cube datamart from one BW system to other BW system

Hi experts,
I have a requirement wherin I have to load the data from Inventory Cube 0IC_C03 from my old BW system to new BW system along with the markers & historical data.
So I have generated the Export datasource of 0IC_C03 and mapped with transformations to my new cube.
As per the 'Note 375098 - Data mart extraction from non-cumulative InfoCubes' , I have extracted using infopackage from the source infocube using the 0RECORDTP = 1 but I am not getting the option in DTP as 'Initial Non-Cumulative for Non-Cumulative values'.Since my datasource is not having the check box 'Opening balance'.
If I try running it as normal update then the DTP load is failing with the error as unlimited time characteristic as the 0calday is having the date 31.12.9999 for all marker records.
After the Full load (0RCEORDTP=1) to PSA,I also tried making the datasource to have 'Opening balance' marked using the ROOSOURCE table STCKUPD field and then tried using the option 'Initial Non-Cumulative for Non-Cumulative values' but still it's extracting zero records to Target cube from PSA.
Please guide me how to proceed with this without extracting the BX initialisation from R/3 system.
Thanks & Regards,
Ugendhar

Hi Ugendhar,
did you manage to solve your issue? I'm getting the exact same problem....
Thanks,
Enric

Cube compression WITH zero elimination option

We have tested turning on the switch to perform "zero elimination" when a cube is compressed. We have tested this with an older cube with lots of data in E table already, and also a new cube with the first compression. In both cases, at the oracle level we still found records where all of the key figures = zero. To us, this option did not seem to work. What are we missing? We are on Oracle 9.2.0.7.0 and BW 3.5 SP 17
Thanks, Peggy

Haven't looked at ZERO Elimination in detail in the latest releases to see if there have been changes, but here's my understanding based on the last time I dug into it -
When you run compression with zero elimination, the process first excluded any individual F fact table rows with all KFs = 0, then if any of the summarized F fact table rows had all KF = 0, that row was excluded ( you could have two facts with amounts that net to 0 in the same request or different requests where all other Dims IDs are equal) and not written to the E fact table. Then if an E fact table row was updated as a result of a new F fact table row being being merged in, the process checked to see if the updated row had all KF values = 0, and if so, deleted that updated row from the E fact table.
I don't beleive the compression process has ever gone thru and read all existing E fact table rows and deleted ones where all KFs = 0.
Hope that made sense. We use Oracle, and it is possible that SAP has done some things differently on different DBs. Its also possible, that the fiddling SAP had done over that last few years trying to use Oracle's MERGE functionality at different SP levels comes into play.
Suggestions -
I'm assuming that teh E fact table holds a significant percentage of rows have all KFs = 0. If it doesn't, it's not worth pursuing.
Contact SAP, perhaps they have a standalone pgm that deletes E fact table rows where all KFs = 0. It could be a nice tool to have.
If they don't have one, consider writing your own pgm that deletes the rows in question. You'll need to keep downstream impacts in mind, e.g. aggregates (would need to be refilled - probably not a big deal), and InfoProviders that receive data from this cube.
Another option would be to clone the cube, datamart the data to the new cube. Once in the new cube, compress with zero elimination - this should get rid of all your 0 KF rows. Then delete the contents of the original cube and datamart the cloned cube data back to the original cube.
You might be able to accomplish this same process by datamarting the orig cube's data to itself which might save some hoop jumping. Then you would have to run a selective deletion to get rid of the orig data, or perhaps if the datamarted data went thru the PSA, you could just delete all the orig data from the cube, then load datamarted data from the PSA. Once the new request is loaded, compress with zero elimination.
Now if you happen to have built all your reporting on the this cube to be from a MultiProvider on teh cube rather than directly form the this cube, you could just create anew cube, export the data to it, then swap the old and new cubes in the MultiProvider. This is one of the benefits of always using a MultiProvider on top of a cube for reporting (an SAP and consultant recommended practice) - you can literally swap underlying cubes with no impact to the user base.

DataMart Interface - Date and time of the transferred data

Hello,
We have a requirement to build a datamart (cube to cube) between two BW systems, using deltas; this is OK and should not present any issue. However a further requirement has arisen, requiring to provide date and time of the created files to outbound systems. I have been looking to RS* and RO* tables for finding out the details of the delta queue.
Table RSDMDELTA provides the Data Mart Delta Management: could this table be used to provide required details? Or are there any other relevant tables containing this info?
Thanks&Regards,
Begonia

Hi,
Thanks for your quick response. We are not using openhubs, but a direct cube to cube datamart - by generating the cube as exporting datasource.
Is there any equivalent table in this case?
Thanks&Regards,
Begonia

Datamart management from cube to external system via XI

Dear All,
I upload data to another external system via XI from an infocube.
Data upload is done with delta update to the cube, also, deltas going to the external system.,,
I have two cubes. One of them is filled with deltas by transformation (i.e 7.0 property). But other is filled with update rules (i.e 3.5 property)..
when i click on data mart status on the cube that filles with 3.5 property nothing happens. No pop-up screen opens for me to delete the datamart status of the cube.
However, when i click on the cube that filles with 7.0 property, a pop-up screen opens for me to reset last delta.
Can you please advise?
Regards,
SP

http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#wp1137294
Adding Proxy Servers
Use the Summary of Proxy Servers page to add and configure Proxy Server resources and make them available in Oracle Service Bus as a system resource. You must be in an active session to configure or reconfigure Proxy Server resources.
1. If you have not already done so, click Create to create a new session or click Edit to enter an existing session. See Using the Change Center.
2. Select System Administration > Proxy Servers.
3. Click Add.
4. In the Name field, enter a name for the Proxy Server resource. This is a required field.
5. In the Description field, enter a short description for the Proxy Server resource.
6. In the Host-Port Parameters section, enter the following information:
1. In the Server Host field, enter the host name or IP address of the Proxy Server. This is a required field.
The Server Host name for the Oracle Service Bus proxy server must be identical to the server host name of the actual proxy server.
2. In the Clear Text Port field, enter the Proxy Server clear-text port number.
3. In the SSL Port field, enter the Proxy Server SSL port number. You must enter either a clear text or SSL port number.
4. Click Add.
You can configure multiple Proxy Servers for each Proxy Server resource. This enables Oracle Service Bus to perform load balancing and offer fault tolerance features for the Proxy Server resource.
7. If the Proxy Server performs proxy authentication, enter a user name in the User Name field, and the associated password in the Password and Confirm Password fields.
These fields are optional, and required only if the Proxy Server is secured.
8. Click Save to create and save the Proxy Server resource in the current session.
9. To end the session and deploy the configuration to the run time, click Activate under Change Center.

Datamart using stock cube

Hi experts,
I have a stock cube which is compressed and having marker update till today. Now I am trying to do datamart using this cube.
Is it possible to do datamart with the cube which is compressed and having marker update.
suggest me the procedure to if it is possible.
regards,
rajesh.

Hi Rajesh,
Check note 375098 (Datamart extraction from non-cumulative InfoCubes)

Problem with 0RECORDMODE in datamart from ODS tu Cube

Hi all,
i need to do a datamart from a cube to an ODS, when i create the Update rules (in 3.5), this ask me "the infoobject 0RECORDMODE doesnt exist in the infosource", thats ok because the cube doesnt need the 0RECORDMODE, but the most weird is, all this that i need to do, is created and it works, now i dont know how that consultan could do it, how can i do this? help guys

Hi,
You just create the export datasource for this infocube then create the flow from cube to ODS.Because from cube to ODS delta work on request based.So it will update the ODS according to the new request which will be load into the infocube...
Thanks,
Kamal

Delta load to cubes from Datamart

Hi Gurus:
We load data from ODS (Datamart) to cubes. I did the INIT & few Delta lods were also done.
I found a bug in the update rule & that has been fixed. I want to DELETE whatever small data in the cube and then do a FULL load from ODS to cube. Can I do this & will that impact delta setup...
Please suggest. I will be happy to assign the points.
Thanks.

Hi,
Yes you Can.
Delete the Requests loaded from the ODS.
Delete the Datamart Status in the ODS.
Just load the Data from ODS to CUbe with Option Init with Data Transfer.
If you have a huge amt of Data first go for Full and then Init without Data Transfer.
Thanks,
-VIjay

Difference between copying cube content using datamarts and direct copying

Hi Experts,
I have been going through the SDN for the last 6 months and this is my first post
I know two methods of copying the cube content from one cube to another.
One is data mart method in which we create a datasource based on the cube and
then create a transformation between the new cube and datasource.
This method is used if our source cube is in same server or in diff server.
Other method is directly copying the cube content from source to destination
by creating a transformation between two cubes .
this is used if source cube anddestc u be are in same server.
My doubt is if both the cubes are in same server then what is diff between first method
and second method,
Please clarify me

Hi,
Now Iam closing this thread with a conclusion .
The question is what is the difference between copying cube
content using datamarts and direct copying
Also what are there any other methods to copy cube contents
from one cube to another.
The diff bet using data marts and direct copying is
In case of datamarts,ven if the source cube is changed in futute there is no effect on the target cube.
In case of copying directly,whenever the source cube is changed,the transformation becomes inactive.
so we have to activate the transformation again.
ALso there are some other methods to copy cube contents fron one to other .
But datamarts is sap standard one.
Thankyo every one for giving answers
Regards,
Sundar

Can MultiProviders , Remote Cubes Support Datamarts Concept?

Hi..
Can some body tell me if we can generate export datasource on a Multi Provider? also, can we include one multiprovider or remote cube in another multiprovider as one of the objects?
thanks..
kishore

Kishore,
No we cant create DataMarts on Multiproviders and Remote cubes, because these are the pipeline, they will have only the structure not the data.
Question 2.
can we include one multiprovider or remote cube in another multiprovider as one of the objects?
No, you will not get any option,because same what I mentioned above.
Thanks
Ramu
Message was edited by: Pidugu Ramu

DataMart from Inventory Cube (0IC_C03)

I want to use the daily inventory cube to data mart and load to a cube/ods otherwise. I am aware that the values of non cumulative kf will not be available but that is okay I need the value of the cumulative kf.
Is there any issues or problems that people can see if I data mart from this cube? Thanks

Hi Niten,
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
Also check the Integartion (last) section in this link:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
Bye
Dinesh

Rollup and Datamart concepts for compressed cube

Hi all,
I loaded the data into cube and i compressed it ( collapse ),
Then I have 2 questions
1. Can i use the Rollup option now?
2. Can I load the data into another cube by using the compressed cube?
good answers are rewarded
Regards
Ram

hi sri
Its not like we cannot do rollup before compression. You are right we do rollup to fill the aggregates. When you will do compression the request id will be deleted and the data will move from F table to E table. There will be no requst id at all.
We do rollup based on Request only. If there is no request how can u do rollup. the same requst will not be availabe for reporting if u dont do the Rollup to aggregates.
Regards
Khaja

How to create a datamart from cube

Hi All,
I want to create a data mart load from one cube to another cube how to do it what all are the steps need for it.I know in ODS we have a setting call update to further data target of we mark it it will create a data mart.
bwuser

Hi,
Please right click on the cube to generate export data source.
A 8 data source will be generated. You will then be able too use this to load the data to other data targets,
-Vikram

Datamart from a compressed cube

Hi All,
is it possible to perform an export datasource on a cube that has been compressed and then load the data it into another cube ?
I get the following error when I do the above
"No corresponding requests were found for request REQU_3YQUNVFWZQRR87ZPBRYDHE97C in the ODS/Cube"
Please suggest if you have any ideas.
Best Regards,
Sanjay

Hi Sanjay,
Yes.It is possible to create an export data source on a cube that is compressed.
Is it an error OR just a warning.
Bye
Dinesh

BI System acting as Source system ? why ?

Hi Freinds ,
Why SAP BI system itself also act as a Source system to another SAP BI system ? what is the need ? why to extract data from another BI system ( Source System ) ? can any one explain this
Ponits for sure...
Regards and Thanks
Vijaya

Hi,
Why cant a BI system act as a source to another BI system.
Let us take an example of some systems( SCM, SRM, CRM, RPM ). These systems support BI as well.
Let us say we have to integrate data from any two of these systems. Instead of taking RAW data from one the systems ( through datasource ), it is always better to take polished data ( from a DSO or a cube / datamart in general ). For this reason a BW system will act as a source.
Also taking an example of our own BW system. Say we are developing or enhancing something in development and we need data from Quality, for this to be feasible the quality system shud act as a source.
Hope this is satisfactory
Regards,
Pramod

Cube to cube datamart in 3.5

Similar Messages

Maybe you are looking for