Cube Translations use in Performance Point Grid

Hi,
I added translations for some of my cube measures etc in SSAS .
How do I display them by their new translation in our Performace Point grid?
Namnami

Thanks for the response. I had tried that time intelligence filter also. But the requirement is , there are 5 filter like Location, Department, Division, Year , Month.
Suppose user selects, TX Branch
Department of Med
Division one
Year 2012
Month september
YTD Or Month (user selects one of the two). If user selects Month here,
Now, My charts should display values monthly data points from Jan 2012 to September 2012. If user selects YTD then, it should display YTD data points from Jan 2012 to September 2012.
I could not force time intelligence filter to aggregate based on the user selected month and Year. With time filter I can do Last 6 month, last 12 months. But users dont want that. They want to have ability to select specific month and year and do the aggregation.
One more thing. The chart axis should cut off at the specified month the user selects. If you selects may 2012, the chart x-axis should stop at may 2012.
How can we do that?

Similar Messages

Performance Point - 1 Dashboard, 2 cubes, 1 Time intelligence filter, filtering 2 different date dimensions on different cubes!

Hi
Hope you are well.
I have a challenge. I am working with Performance Point and a number of different cubes.
In this case I need to include graphs and charts from 2 different cubes on one dashboard page.
The challenge I have, is to be able to use a Time Intelligence filter from one cube, eg, [TimeSold].[Calendar hierarchy] on Cube 1, and for this to filter graphs from the second cube (second cube [Time].[Calendar hierarchy]), on one dashboard page.
Is there any way I can achieve this using MDX or Parameters within performance point?
I cannot amend the cubes or dimensions. I have to work with the front end tools only.

Hi ShebUK,
I don't think we can achieve this requirement on the front end, but you can discuss this issue at the following forum:
http://social.technet.microsoft.com/Forums/en-US/home?category=performancepointserver
I'm not familiar with PerformancePoint Services and not sure that we can implement linked dimension to achieve this. A linked dimension is one that exists in one Analysis Services database, but reused in another Analysis Services database of the same version
and compatibility level. For more information, please see:
Define Linked Dimensions: http://msdn.microsoft.com/en-us/library/ms175648.aspx
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

While browsing the cube data Excel the circle pointer starts to spin and the excel go into a not-responding state,any recommendations to improve performance in excel?

hi,
while browsing the cube data Excel the circle pointer starts to spin and the excel go into a not-responding state,any recommendations to improve performance in excel?
I have 20 measures and 8 dimensions.
while filtering data by using dimensions in excel it is taking so much time.
Ex:
I browsed 15 measures in excel and filtered data based on time(quarter wise) and other dimesion product. It is taking long time to get data.
Can you please help on this issue.
Regards,
Samba

Hi Samba,
What're the versions of your Office Excel and SQL Server Analysis Services? It will be helpful if you can share the detail computer resource information to us while encountered this issue.
In addition, we don't know your cube structure and the underlying relationships. But you can take a look at the following articles to troubleshoot the performance issue:
Improving Excel's Cube Performance:
http://richardlees.blogspot.com/2010/04/improving-excels-cube-performance.html
Excel Against a SSAS Cube Slow: Performance Improvement Tips:
http://www.msbicentral.com/Blogs/tabid/131/articleType/ArticleView/articleId/136/Excel-Against-a-SSAS-Cube-Slow-Performance-Improvement-Tips.aspx
Regards,
Elvis Long
TechNet Community Support

Sharepoint 2013 BI solutions using Performance point services is can be compatible with Analysis server 2008 R2?

HI
In Sharepoint 2013 BI solutions using Performance point services is can be compatible with Analysis server 2008 R2?
here in sp 2013 i upgraded sp 2010 BI site and when i open dashboard pages they not display the pointers.
and when i open dashboard designer i was unable to connect Analysis server 2008 R2 where data source exists
adil

Hi
1) here i migrated a Publishing web applications and bi sites to 2013 sucessfully, this site is enable anonymous access
2) Installed SQLSERVER2008_ASADOMD10
3) added performance point service application pool account as a db_owner and data read access permission to content database and added permission to unattended service account to SSAS server .
3) and after i was able to connect to SSAS data soruces.
here when i open dashboards with administrator user , this user able to view dashboards
but when external user able to view dashboards it asking authentication and throws error.
Log Name: Application
Source: Microsoft-SharePoint Products-PerformancePoint Service
Date: 3/15/2015 11:59:02 AM
Event ID: 1101
Task Category: PerformancePoint Services
Level: Error
Keywords:
User: NT AUTHORITY\IUSR
Computer: TSharepint2013.test.com
Description:
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this
problem:
Microsoft.PerformancePoint.Scorecards.BpmException:
The scorecard no longer exists or you do not have permission to view it.
PerformancePoint Services error code 20700.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
<EventID>1101</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-03-15T08:59:02.151586300Z" />
<EventRecordID>149327</EventRecordID>
<Correlation ActivityID="{54EDF29C-9842-C025-E404-2869814A5DF0}" />
<Execution ProcessID="8120" ThreadID="7816" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security UserID="S-1-5-17" />
</System>
<EventData>
<Data Name="string1">An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:
Microsoft.PerformancePoint.Scorecards.BpmException:
The scorecard no longer exists or you do not have permission to view it.
PerformancePoint Services error code 20700.</Data>
</EventData>
</Event>
adil

Copy Performance Point lists between environments

Hello,
I would like to know if there is a way to copy paste Performance Point content lists and Data Connexion between 2 SharePoint 2013 environments (different farms)
Actually we use Dashboard Designer to create report, kpi, filter and Dashboard . We actually have many items in our production farm and would like to copy these elements into POC farm (same Active Directory, same Cube, OLAP)
Is it possible ? We already success to copy Performance Point content in the same farm between 2 differents web application or Site collection.
Best regards,

Hi arimaze,
How did you copy PerformancePoint content in the same farm?
Whether you try to use "Export Content" and "Import Content" ribbon button in PERFORMANCEPOINT ribbon. Please do a test, and let me know the result.
In addition, there are two articles about migrating PerformancePoint content, please check if they are useful for you:
http://denglishbi.wordpress.com/2010/11/20/migrating-performancepoint-2010-content-to-new-server/
http://blogs.msdn.com/b/performancepoint/archive/2012/08/03/what-s-new-in-performancepoint-services-2013.aspx (8.server-side migrate)
Best Regrads,
Wendy
Wendy Li
TechNet Community Support

Business Intelligence and performance point problem

Hi Everyone,
Please does anyone know why creating a dashboard from a Sharepoint list is such a hassle. I have configured performance point services, a secure store and a business intelligent website that has a data connection library and Performance Point content
list . Unfortunately anytime I try to use dashboard designer to create a new data source and specify the site settings(using unattended account method) I can't save it. It gives me an error claiming that I either don't have permissions or the data source
doesn't exist.
A search around the web for answers doesn't seems to solve my problem as it suggests that the problem is associate with many things which I'm not clear about. Please could someone who is good at this at least tell me the critical things to check and the
clearest way to set this up.
Thanks,
Dominic

Hi Dominic,
According to your error " I either don't have permissions or the data source doesn't exist", it should be related to the unattended account permission.
Once the unattended service account has been configured, you must grant that account access to your data sources:
For SQL Server data, the account must have a SQL logon with db_datareader permissions on each database that you want to access.
For SQL Server Analysis Services data, the account must have read access to the cube or an appropriate portion of the cube, depending on your needs.
For Excel Services data, the account must have access to the Excel workbook in a SharePoint document library.
For data in a SharePoint list, the account must have read access to the list.
Reference:
https://technet.microsoft.com/en-us/library/ee836145.aspx
Also you can have a look at the blog:
http://www.chrismcnulty.net/blog/Lists/Posts/Post.aspx?ID=74
https://yossidahan.wordpress.com/2012/08/14/cant-get-ssas-databases-to-appear-in-performance-point-dashboard-designer-check-you-adomd-net-version/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Performance point dashboard slow in rendering

Hi,
we have some performancepoint dashboard deployed on SharePoint 2010. These dashboard access an olap cube and display some data from cube.
Sometimes rendering of dashboard is slow. Analyzing pages using developer dashboard we found that when rendering is slow we have a lot time spent in wcf calls to performancepoint services.
For instance we spent 30 seconds in one wcf method call to GetFilterDisplayData method.
If we run profiler in sql we don't see any query on analysis during these slow calls, so we assume there are some problems in wcf calls to PerformancePoint Service.
Also we looked to this article for applying some caching settings:
http://blogs.msdn.com/b/performancepoint/archive/2010/04/16/a-general-caching-overview-for-performance-point-services-for-sharepoint-2010.aspx
Pages' filters don't contain too much data except for time filter that is a multi select tree filter that contains all days from January 2010 until today.
Any suggestions?
Thanks!

lookalike MSFT know about this potential performance, i think you need WCF throttling.
WCF throttling settings
PerformancePoint Services is implemented as a WCF service. WCF limits the maximum number of concurrent calls as a service throttling behavior. Although long-running queries could hit this bottleneck, this is an
uncommon bottleneck. Monitor the WCF / Service Model performance counter calls outstanding for PerformancePoint Services and compare to the current maximum number of concurrent calls.
If needed, change the Windows Communication Foundation (WCF) throttling behavior. See the WCF
service throttling behaviors (http://go.microsoft.com/fwlink/p/?LinkId=200612) and Wenlong Dong’s blog post on WCF Request Throttling
and Server Scalability (http://go.microsoft.com/fwlink/p/?LinkId=200613).
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Performance Point Dashboard Designer filter and SSRS parameter problem

I've created reports in SSRS, with parameters, but can't get the filter in Performancepoint to have any affect on the SSRS parameter/reports. My SSRS reports are using shared datasets I've created, with no cubes. My SSRS parameter is text data type.
In the Dashboard Content window, I have the filter in the header, and have drug (at different times) the display value and the member unique name to the report.
In this header area (with filter), clicking the down arrow, there is no Edit Connection option. Should there be? Or would that only be to connect to a higher up filter? When clicking Create Connection, under the Items tab, 'get values from' lists header
and Date and is greyed out, I can put the report name in 'send values to', but under Connect To, there are no options. Why? And the OK button is greyed out.
In the report area, the filter name (Date) is listed underneath Connections. And right clicking the filter for this connection and clicking Edit Connection, under the Items tab, under 'get values from', it says header and Date, and under 'send values to',
zone 1 - and the report name is listed. Under the Values tab, the parameter name (DateNameParm) is listed in the Connect To, and I've tried both member unique name and display value for source value.
There's another thread on here titled "Performance Point - Dashboard Filter Not Working with SSRS Reporting Parameters" (won't let me post link), where someone here says they had to change the filter data type
from GUID, but I see no place to do this.

Hi Roberto,
Dashboard layout and sizing in PerformancePoint is very flexible. This article covers nearly all of the sizing options available, one basic dashboard page scenario and a few common questions.
http://blogs.msdn.com/b/performancepoint/archive/2008/01/07/performancepoint-dashboard-sizing-explained.aspx
Please go to the last question and answer: “filters are locked to auto-sizing,
so their width will override the size of their parent zone. Minimum filter width may be adjusted in the ParameterTree.css file. See the article
Working with the Monitoring CSS Files to Adjust Settings in Deployed Dashboards on the PerformancePoint team blog for more detail.”
As a best practice, put dashboard filters in a separate zone from where you put reports and scorecards. Otherwise, items such as chart legends or reports might not be displayed correctly.
Regards,
Rebecca Tu
TechNet Community Support

Performance Point 2007. Filter seems to split query

Hi all,
I am having an issue with a performance point 2007 filter. It is based on a hierarchy of 4 levels. Total amount of records is under 500 (about 450) so i shouldnt have the filter limit issue.
However the filter is stopping about 3/4 the way through the list on our production server (QA and Dev are fine). I have looked for the filter limit in web config - cant find it on any server.
So I have run SQL profiler on the cube while running PP. I can see the queries come in and its splitting the filter query into two queries in exactly the point where we are seeing the missing data.
Any ideas why?
Many thanks
Dan

No the issues is still not resolved but I convienced my client to use alternate option which is SSRS Reports with MDX.
Even I tried the below configuration but issues not resolved
<system.serviceModel>
<client>
<commonBehaviors>
<behaviors>
<endpointBehaviors>
<dataContractSerializer MaxItemsInObjectGraph="2147483647" />
</endpointBehaviors>
</behaviors>
</commonBehaviors>
<endpoint
name="http"
contract="Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication"
binding="customBinding"
bindingConfiguration="MetadataWebServiceHttpBinding" />
<endpoint
Regards,
adeel
Muhammad Adeel

Performance Point

I have Performance Point configured and can open the Dashboard Designer. I also can correctly create a Data Source and select the Cube data base from the analysis instance.
However when I create Performance Point (Analytics Chart) I always see an error running data source Query. In the event logs I see
The Unattended Service Account "" does not have access to the cube "" or it no longer exists on the following data source server.
However I know the Cube has be built and has Admin permissions to the analysis instances. I have also provided the user full rights to the site.
What needs to be completed to ensure this functions?

I figured it out. I was able to use OR operator in filter ()

BW BCS cube(0bcs_vc10 ) Report huge performance issue

Hi Masters,
I am working out for a solution for BW report developed in 0bcs_vc10 virtual cube.
Some of the querys is taking more 15 to 20 minutes to execute the report.
This is huge performance issue. We are using BW 3.5, and report devloped in bex and published thru portal. Any one faced similar problem please advise how you tackle this issue. Please give the detail analysis approach how you resolved this issue.
Current service pack we are using is
SAP_BW 350 0016 SAPKW35016
FINBASIS 300 0012 SAPK-30012INFINBASIS
BI_CONT 353 0008 SAPKIBIFP8
SEM-BW 400 0012 SAPKGS4012
Best of Luck
Chris
BW BCS cube(0bcs_vc10 ) Report huge performance issue

Ravi,
I already did that, it is not helping me much for the performance. Reports are taking 15 t0 20 minutes. I wanted any body in this forum have the same issue how
they resolved it.
Regards,
Chris

Performance Point Services vs Reporting Services

I am using Reporting Service in SharePoint 2013 Enterprise Version.Now i have to create a POC for Performance Point Service.I want to know in which scenerios i can use Performance Point Service instead of reporting service,Please suggest me the article which
differentiate between both the servies

In short, SSRS is great for drill-down (matrix) reports and free-form reports, PPS is great for building dashboards, KPIs and predictive reports. Also see:
http://www.mssqltips.com/sqlservertip/2737/sql-server-reporting-services-vs-performancepoint-services/
http://businessintelligist.com/2012/04/02/comparing-performancepoint-powerview-excel-services-and-reporting-services/
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Performance Point Services - Unable to connect to site from Dashboard designer

Recently we moved the Reports site collection from one environment to other. So the Performance point content is also copied.Now I wanted to change the report paths that were deployed using Performance point services. When I try to open the report file from
perforamnce pointcontent list it shows unexpected error. If I am trying to connect to the using Dashboard designer it says URL is not available does not reference Sharepoint Site or you do not have permissions to connect.
Pleasee see the attached file for more details.
How do the reports be fixed when they are to be deployed using Performance point services(Dashboard designer). Unfortunately we do not have the dashboard designer ddwx file with us. Its been developed by vendor and they have not given us.
How should the Dashboard reports(SSRS Report ) be moved from one environment to other.What is the best way to move the performance point dashboards from one environment to other.
Environment- Sharepoint 2010

At both site-collection level and web application level you need to enable SharePoint designer. Did you do that ?
http://blogs.msdn.com/b/mcsnoiwb/archive/2010/07/01/locking-down-sharepoint-designer-2010.aspx
Opening site in SP Designer also needs WebDAV to be enabled on the web front end servers. If the problem still persists, simultaneously open up fiddler and see what's the error message you are getting. That may give you some clue to proceed
Please mark the replies as answers if they help or unmark if not.

Performance point Filter error : " There was a problem preparing the WebPart for display"

I’m going to create a performance point filter .I chose “Custom Table” type to select Project Name for my reports. I have some reports which have Project Name (ProjectUID as value) as parameter .So I’m going to create a filter based on Project Name (ProjectUID
as value) to use for all report. these are my settings:
Table: MSP_EpmProject_Userview
Key :ProjectUID
Parentkey: (none)
Display Value: ProjectName
Is default: (none)
But when I add these web part to my page I see this error:
“There was a problem preparing the WebPart for display.
Column 'ProjectName' does not allow nulls.”
I don’t know what should I do
is there any other wy to do this?

Hi,
I have a similar issue, did you manage to find a solution?

Pass parameter to ssrs report in performance point webpart from textbox text

How to pass parameter to ssrs report in performance point webpart from textbox text
Please help me to solve this ...
Bikky Kumar

Edit your SharePoint page and add new text filter web part.
Then pass the text filter value to your performance point report using connections. Your report should include at least one parameter to get the value. More over you can set default value in text filter.

Cube Translations use in Performance Point Grid

Similar Messages

Maybe you are looking for