Cubes 0SMD* (SolMan Diagnostics)
Hi!
I want to use data from SolMan Diagnostics to run BI Reports. There are some Content Cubes, e.g. 0SMD_PE2H, but I don't know how these cubes are filled...
Cubes are Real time and have requests starting with APO*, but neither BI-IP nor BPS are used to fill them.
Has anybody an idea, how (report, special job, etc.) data are loaded in these cubes?
regards,
Gunter
That's what I'd like to do. That's also why I posted this message, since I am not sure whether the JAVA update will spoil my Solman Diagnostics. Thus far, no issues. Just got a message when login to smd/admin "Upgrade status for the current version is outdated. Please upgrade now.".
I did patch them one by one, since maintenance optimizer isn't installed yet. I need to get approval from SAP to download. ABAP part has been top-up to SP15. So, only JAVA is left to SP14.
Any advice?
Regards,
Agoes
Similar Messages
-
SolMan Diagnostics integration with Mercury LoadRunner
Hi,
I've been reading about the new SolMan Diagnostics and specifically about the Going Live Check that includes a load test of the 3 most important customer click scenarios in SAP Portal using Load Runner tools.
My questions are:
1. The 3 most important customer scenarios are defined by SAP or by the customer?
2. The LoadRunner Generator installed in the Sol Man act as a client to generate the load on the SAP Portal? The script is running in Sol Man hitting the SAP Portal?
3. If I have my own licensed LoadRunner Controller can I
connect to the same Generator installed in the Solution Manager to run my own scenarios and take advantage of the Sol Man Diagnostics integration?
Thanks for your time and responses.
Erika B.Hi Guyz,
I can see that this thread is just growing. Please find below the steps to accomplish this integration:
Mercury Quality Centre 9.0 :-
1) Ensure Mixrosoft .Net Framework 1.1, SP1 is installed
2) Ensure Quality Center 9.0, Patch 9 is installed
3) Install the SAP Inspector component on each Quality center client
SAP Solution Manager :-
1) Create an SAP Role with auth objects S-RFC and S_TABU_DIS
Importing BPH in QA Center :-
1) In Import Solution Manager Business Blueprint Wizard, Tools>Import Solution Manager Blueprint
If you have questions, look in to support.mercury.com
Thanks, Mehfil Meherali -
Roles/authorizations for user to Solman Diagnostics.
We have a need to have non-administrator persons access our Sol Man
Diags environment. We do not want them to access with j2ee_admin
account.
How / what roles or authorizations do I assign to restricted users so
users cannot see the administration and setup tabs and not be able to
turn traces on?The roles for the end users are mentioned in the standard SMD guide pleas go thuroug it
-
Regarding Diagnostics in Solman 4.0
Hello Experts,
I want to implement solman diagnostics in SM 4.0 . reagrding which i hv a few questions:
1. first of all is diagnostics only meant for configuring and diagnosing java based applications or i can configure /use diagnostics for ABAP based systems also in solman?
2. Wt are the prerequisites for implementing diagnostics in solman like do i need to configure EWA and service desk first inorder to implement diagnostics in solman? or if there are any other kind of prerequisites?
3. Lastly the refernce guides over service marketplace and blog over sdn tat i hv gone through i found bit confusing,so many steps are given without usage tat u donno which one toconfigure and which one not to? If somebody can provide Good self prepared document/guide , any good clear and esay to understand link for configuration , it shall be helpful .Also here if broadly steps are mentioned here for configuration along with it ,it shall be appreciated.
Points shall be awarded for useful answers. requested to revert at earliest. my eamil id is [email protected] .
Thanks and Regards,
SomyaHello Paul,
May i know wt is silent mode/can u plz elaborate. I know the installatyion directory of wily ,i hv seen its not there > when ruuning setup iam getting following error:
java.lang.NullPointerException
at ZeroGf1.a(DashoA8113)
at ZeroGf1.a(DashoA8113)
at ZeroGfj.a(DashoA8113)
at com.zerog.ia.installer.AAMgr.a(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.g(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
at com.zerog.ia.installer.Main.main(DashoA8113)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.zerog.lax.LAX.launch(DashoA8113)
at com.zerog.lax.LAX.main(DashoA8113)
Requesting useful and helpful answers plz.
Regards,
Somya -
I need to install the SOLMAN, in my landscape or another server ??
Hi experts,
My landscape is the typical landscape; Production Server, Test Server and development Server.
I need to install the SAP Solution Manager; This installation would have to do it in some of my existing servers (Production, Test or Development) or it would have to do it in another one?
Thank's
Douglas V.Hi Douglas,
Before deciding where to install Solman also take into account below checks -
1] Incase you will be using Solman diagnostics+Wily introscope functionality of solman, I would certainly recommend to install solman on a separate host as these tools hog lot of memory resources.
2] For basic use of solman - EWA, install keys generation, ccms...you can think of installing on existing box - but still it should be strong in configuration. As SAP is adding lots of features in EHP packs and sooner or later you will need to use those.
My 2 cents. (rewards points if useful)
Thanks -
Diagnostics Setup - remembers old settings
Hi,
have a strange problem and it's really giving me a headache. We did set up solution manager diagnostics earlier ago and it worked fine. Recently I logged on again to the SolMan Diagnostics page and got the message that Diagnostics was not running because the WEBADMIN connection did not work.
I checked in Visual Admin (JCo RFC Provider) and it was really down. The reason was the user which was entered for the connection did not exist anymore. So I changed it to something else and it was started up fine.
But I also had to re-run a Diagnostics Setup -> Diagnostics System -> Setup Wizard due to upgrade we made.
Magically this again changed the old connection parameters back in Visual Admin's WEBADMIN connection. On the very first page of the diagnostics wizard you can maintain the connection parameters to the ABAP system and I also changed that to the new user but when the setup proceeds it always fails at the ABAP connection step saying the user ID and password is not correct (and stating the old user which really surprises me).
So it seems whatever data you gave for the very first time the wizard just can't forget it and brings them up even you already changed the connection parameters...and it also overrides the WEBADMIN connection parameters back to the obsolete parameters.
Anybody has an idea how can I overcome this issue? Is it somewhere buffered and I need to empty the buffer?
Our solman is a 7.0 at SPS17
CheersHi, thanks for the reply - the problem is not in the ABAP stack. It's on the java side when you try to open the http://hostname:port/smd link and try to do a diagnostics setup wizards.
On this first page there are some parameters you need to provide like:
Support User
Please enter the UserId of the SMD Support User. If not yet existing, the User will be created with password set in advanced setup (default : 'init1234')
ABAP Connection
Please enter the settings of the Solution Manager Backend ISM
ABAP Client
ABAP Admin User Id
ABAP Admin Password
ITS port
Is BW installed in a separate... Client ? System ?
J2EE Administrator
Please enter admin User Id and password of the SAP J2EE administrator of Solution Manager
J2EE Admin User Id
J2EE Admin Password
Etc etc...
my problem is that at the very first time I populated the ABAP connection parameters using a user ID called e.g. SMD_RFC_XYZ.
Now when I change this to e.g. SMD_COMMUINICATION user and run the setup wizard with the changed parameters in the error log I still see SMD_RFC_XYZ user id for some reason I don't know where the system gets it from. -
Diagnostics system Advanced setup error
Hi all,
I am configuring solman diagnostics. My system level is Solman 7.0 SPS 16. I have executed Diagnostics system setup wizard and all taskes executed sucessfully.
OS is windows 2003 Server and Java 2 SE 1.4.12 version is installed in the server
When i click on Diagnostics setup> Diagnostics system> Advanced setup, i am getting 500 Internal server error
Failed to Process the request
Following error appears
java.lang.NoSuchMethodError: com.sap.sup.admin.setup.ManagingServices.readMultipleEMs()[Lcom/sap/sup/admin/setup/SysConnectData;
I have installed wily Enterprise manager 7.2.2.0. and
http:<host>:8081/workstation and http:<host>:8081/webview both are opening
kindly helpHi all,
I want to uninstall the current JAVA j2sdk1.4.2_13 from the diagnostics server and update to JDK 1.6.
I hope the error which i am facing is because of the java version.
Can i directly uninstall from start>settings>control panel--> Add and remove programs --> java 1.4.2.13
then update the jdk 1.6. Will this action affect SAP Solman system in any way.
kindly help -
SMD not communicating with SOLMAN
Hi,
The SMD instance on our portal servers is supposed to talk to SOLMAN. This was working fine until I had to change the J2ee_admin password on SOLMAN. After that, the SMD instances will not start because they can not communicate due to the password being changed. I have no way of knowing the old password. How can I update the password for these SMD instances? I found note 903080 which mentions a URL (.../smd/admin URL) but I can not access this URL. I've tried http://servername:50000/smd/admin but the page is not found.
Any ideas?
Thank you very much.
ShelbyHi,
Basically, the SMD agent registers itself with solman using the SMD_ADMIN user. I think that you may have given J2EE_ADMIN user earlier and thats why when the password for J2EE_ADMIN was changed, the issue happened.
You can try and register the agent again using one of the following ways:
1. On solman host, go to Solman Diagnostics workcenter and under Agent Administration, in the Agent Credentials panel, fill the previous login of the Diagnostics Agents and enter the new one (or enter the same login with a new password). Click on the Update all agents button.
2. If the previous step is not possible, reregister the SMD agent on the portal server using the following command:
smdsetup managingconf hostname:"sapms://<J2ee_Message_server_hostname>" port:"<http_port_message_server>" user:"<SMD_ADMIN or J2EE_ADMIN>" pwd:"xxxxxx"
This will reregister the SMD agent with the new user credentials.
Please try and let me know if this works.
Regards,
Shitij -
EP 6.0 Monitoring by Solman 7.0
Dears,
We want to configure system monitoring for our EP 6.0 server on Solman 7.0
I have added EP in smsy by SLD activation.
ShivamHi Shivan,
Pls check this blog & links
How to perform a complete HTTP trace for SAP Enterprise Portal application? Try SAP Solution Manager Diagnostics
/people/zhaogang.li/blog/2005/08/29/how-to-perform-a-complete-http-trace-for-sap-enterprise-portal-application-try-sap-solution-manager-diagnostics
You need to config solman diagnostics.....
https://websmp105.sap-ag.de/diagnostics
http://help.sap.com/saphelp_nw04/helpdata/en/2c/525e3c1852d733e10000000a114084/frameset.htm
/people/luisfelipe.lanz/blog/2006/02/07/installing-a-solution-manager-diagnostics-the-easy-way
Root Cause Analysis for SAP MDM 5.5 SP06 with SAP Solution Manager Diagnostics
/people/detlef.thoms/blog/2008/04/15/root-cause-analysis-for-sap-mdm-55-sp06-with-sap-solution-manager-diagnostics
Regards
Prakhar -
SolMan Diagnotics - Flight Recorder
For the setup of the Root Cause Analysis in SolMan Diagnostics, we need to "enable Flight Recorder" by
adding "jstartup/recorder = ..." to the instance profile of the managed system.
No issue with doing this BUT does anyone have an insight into what the "Flight Recorder" is? And where we can see any of its results in the SMD?
We've searched all over the place and can't find any background info.
TIA ... BartThe Flight Recorder is used in the analysis of system shutdowns.
It contains all the startup framework log files from the instance's work folder as well as the work folder of the message server and enqueue server. It also collects the default traces from all nodes so can be useful in analysis of issues relating to EP, BI or other J2EE web based apps -
Hi,
I get a set of 30 dumps daily on my Solman system.
The user is SMD_RFC & the dump is as follows:
Runtime Errors CREATE_DATA_UNKNOWN_TYPE
Exception CX_SY_CREATE_DATA_ERROR
Date and Time 28.01.2011 00:30:52
Short text
CREATE DATA: The specified type "/BI0/V0MSS_C04D2" is no valid data ty
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_SMD_AGGREGATE_MDX==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CREATE_DATA_ERROR', was not
caught in
procedure "INITIALIZE" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The dynamically specified type "/BI0/V0MSS_C04D2" at CREATE DATA is no valid
data type.
The type is either unknown or an object type.
I found Note 1492999..however this is for DB6, whereas I'm on SQL.
Some of the dumps have the specified type with MSS in the short text..while some dumps have the specified type as DB6.
I couldn't find a note for MSS:(
We're on SP25.
pls. help.
Thanks,
Saba.> oh..i coudldn't find it in the script section of DBACOCKPIT...how do i run this?
in the script section? That is a transaction called by SOLMAN_SETUP to set up the BI content/connection
> I know these dumps are basically harmless..but still, cing 30 of them daily sure doen'st bring a smile to your face every morning:(
Harmless in the sense that the data can't be put into those cubes, they are mainly used by SolMan diagnostics.
Markus -
SMD E2E: Configuration Analysis
Hi!
I can already see the data for E2E Workload Analysis.
Unfortunately I cannot see the data under the tab "E2E Configuration".
Can some one tel me how to proceed with with errors/warnings?
No SID found for value 'E11 0020198811012003146909000001927' of characteristic 0SMD_FSRC
Invalid filter on 0SMD_FSRC: Filter changed
Characteristic 0SMD_CSAL was changed in InfoCube 0SMD_CA01. Adjust the query
What I have already done
tcode RSRT --> Gen. query directly --> "0SMD*"
tcode CCMSBISETUP --> Sceanrio "E2E"
Any helpful information will be appreciated
regards
ThomHi,
I'm trying to setup E2E. Diagnostics server (BI client in solman) & Managed system setup was done.
I don't see any graphs(at least plain) in solman. I observed that extractor jobs are failing, also i dont see any info objects under solman diagnostics in TC - RSA1.
Please guide.
Thanks in advance. -
RFC Error message when logging on to SMD
Hello Experts,
While installing SMD, the LMSERVICE and SAPISEM80.SAR, SAPISMM80.SAR have already been installed through SDM.
1- When I type http://hostname:8004/SMD and login with my username j2ee_admin and password, I get a blanck screen with following error message
"message.rfc_get_error",
"message.guid_text".
Can anyone let me know, how can I resolve this error message of "message.rfc_get_error"?
Also should I use the port no for SMD as 8004 or 50400?
Thanks,
HaleemDear Haleem,
Please follow the advice from the below link.
Solution Manager Diagnostics not ready to use
Authorisation Error in Solman Diagnostics
Definitely solve your problem ... specially with WEBADMIN RFC in ABAP and run DIAGSETUP.
Regards
Shailesh Mamidwar -
Meet The Experts Questions: SAP NetWeaver Programming Model
Hi SDN Members,
In Palo Alto as well as in Walldorf we are having Meet the Expert sessions, where SAP developers will answer your questions to a particular topic.
<b>SDN Meets Labs Palo Alto Agenda</b>:
https://www.sdn.sap.com/sdn/index.sdn?page=sdnmeetslabs_palo_alto_agenda.htm
<b>SDN Meets Labs Walldorf Agenda</b>:
https://www.sdn.sap.com/sdn/index.sdn?page=sdnmeetslabs_walldorf_agenda.htm
This thread is your opportunity to ask your question to the Experts already here on SDN and we will make sure that they are going to be asked. (Or at least as many as can be answered within an hour.)
Please post your questions regarding the <b>SAP NetWeaver Programming Models</b> here.LIfe demo of NW Administrator:
Yes. If everything goes right.
SolMan is not our focus, but positioning to SolMan Diagnostics will be discussed.
Message was edited by: Christoph Nake
Message was edited by: Christoph Nake -
Meet The Experts Questions: Operations Monitoring
Hi SDN Members,
In Walldorf we are having Meet the Expert sessions, where SAP developers will answer your questions to a particular topic.
<b>SDN Meets Labs Walldorf Agenda</b>:
https://www.sdn.sap.com/sdn/index.sdn?page=sdnmeetslabs_walldorf_agenda.htm
This thread is your opportunity to ask your question to the Experts already here on SDN and we will make sure that they are going to be asked. (Or at least as many as can be answered within an hour.)
Please post your questions regarding the <b>Operations Monitoring</b> here.LIfe demo of NW Administrator:
Yes. If everything goes right.
SolMan is not our focus, but positioning to SolMan Diagnostics will be discussed.
Message was edited by: Christoph Nake
Message was edited by: Christoph Nake
Maybe you are looking for
-
Not able to create More than 1 Partition in USB Drive using kernel32 and DeviceIoControl
I have successfully created 2 or more partitions in USB drive using DeviceIoControl in C++. Now I am trying to convert this code into C# using kernel32 and DeviceIoControl. But I am not getting more than 1 partition. Can anybody tell me what is wrong
-
I have 2 different projects in RoboHelp 11 that have a "common" part, i.e. several chapters are identical, eventually with minor changes that could be solved with flags, and I was wondering if it would be possible to have the "common" in a sub-projec
-
Have just downloaded Photoshop CS6 13.1 update for mac but on running the update it fails too install! Tried several attempts but to no avail!
-
Hi I have read on several links that the prolific usb driver may work with non nokia ca42 cables, how do i know which driver yo download as there seems to be loads, also when i unzip it what do i do then, i have downloaded a couple but dont see what
-
Testing Function Module before using in DataSource?
Hi Experts, After writing a Function module for Transaction DataSouce (by copying RSAX_BIW_GET_DATA_SIMPLE), is there any way to test the Function Module before using in Transaction DataSource? (to see how many records it retrieves). Also can somebod