Cubes are not visible in Voyager cube browser

Hi
After following the steps below:
1. Login to Central Mangagement Console.
2. Click on Voyager Connection to see the list of avaliable connection.
3. Click on New button(present below the manage menu) to create a connection.
4. Give name and chose the type of server you want to connect from the providers list.
5. Now Give the server name and click on connect button.
6. Give the username and password and click on ok
7. Select the cube you want connect from the cube browser and click on OK button.
I am uable to view all the cubes in cube browser. Do I have to make any setting/ maintain in BI to view the cubes in cube browser.
Any suggestion/solution?
Thanks
Debasish

So are you trying to connect to an infocube or a BEx Query.
If you are trying to connect to BEx query - the property 'Allow External acces to this query' on the extended tab for query properties should be set.
Cubes should be visible in the folder $Infocubes. If they are not it could be an issue with authorizations

Similar Messages

  • All the cubes are not visible in cube browser of Voyager

    Hi
    After following the steps below:
    1. Login to Central Mangagement Console.
    2. Click on Voyager Connection to see the list of avaliable connection.
    3. Click on New button(present below the manage menu) to create a connection.
    4. Give name and chose the type of server you want to connect from the providers list.
    5. Now Give the server name and click on connect button.
    6. Give the username and password and click on ok
    7. Select the cube you want connect from the cube browser and click on OK button.
    I am not viewing all the cubes in cube browser. Do I have to make any setting/ maintain in BI to view the cubes in cube browser.
    Any suggestion/solution?
    Thanks
    Debasish

    Hello Debasish,
    I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • Cumulative Balances in PCA Balance Sheet cube are not correct.

    Hi
    Could you please help me in sorting out this Issue.
    Cumulative Balances in PCA Balance Sheet cube are not correct.
    After doing a reconciliation my conclusions are:
    Opening balance for 2005 (fiscal period 009.2005) is not in BW
    Opening balance for 2006 (fiscal period 000.2006) is not in BW
    Opening balance for 2008 (fiscal period 000.2008) is not in BW
    Opening balance for 2009 (fiscal period 000.2009) is not in BW.
    With the exception of fiscal year 2007(opening balance is in BW u2013 000.2007) the cumulative balance resets itself at the start of each fiscal year. The attached spreadsheet has an example of the data in BW and screen dumps from R3.
    Please help me how to find Opening balance in BW for PCA
    Thanks
    Bharti

    you need to derive your begining balance based on the fiscal year in your selection. It will be minus 1 year and period 12 for that year.
    pts appreciated.

  • Re-publish site using 3rd party FTP Client-Changes are not visible

    I uploaded my Iweb site to the server using FileZilla. When I make changes in I-web and republish, the changes are not visible. I even tested it out by deleting the site folder and re-uploading everything after I re-published the site in IWeb...but the change still isn't visible. Any suggestions as to why?

    Apparently you publish to a folder.
    iWeb's job is done!
    What you do next with the files is your responsibility.
    Try uploading the changed files to their respective folders on the server.
    You can identify the changed files by the date/time.
    Then in the browser, clear the cache and reload the page.
    iWeb is not involved.

  • Roadmap steps  are not visible after patching

    Hi ,
    After upgrading or patching ,roadmap steps are not visible in my application.
    i have used several road maps in my application?
    what is the reason for this?
    Regards,
    Lakshmi.

    I have faced the same issue.
    These are browser compatibility issues.
    Different browsers behave in different manner.
    There is a permanent solution for it to upgrade tools version to 8.52.03.
    This update has been provided by oracle for resolution of browser compatibility issues.
    Hope it helps !!

  • When I upload mp4 videos to my Google Blog from my PC, they are not visible

    When I upload mp4 videos to my Google Blog from my PC, they are not visible on my iPad, even though I have no trouble seeing and playing them on my PC. Is there a setting on my iPad causing this?

    The question is how are they displayed in the HTML on the Google blog, and/or do they get converted in the upload process. I don't use Google blog, so not familiar with its encoding. You could try an alternate browser such as iCab Mobile or Dolphin.

  • Image components are not visible.

    Hi Experts,
    Some time back i created a dashboard based on XML connectivity with around 59 components in it. Some of them are not visible on the canvas (I did checked the object browser) and few of the image components are even not visible in the preview mode.
    I am quite new in Dash boarding.
    kindly suggest me way to make it work as earlier.
    Thanks!

    We faced the same issue during early development phases. You need to install the fix pack to correct this issue. Remember fix pack will make sure this wont happen again but it wont make the disappeared component to appear.
    3.5 is the latest patch available you can install anything above 3.1 (we are using 3.3).
    let us know if you still have any issue regarding this.

  • Portal Roles are not visible

    Hi,
    We have upgraged Portal (Nw 2004s) SP17 to SP18 ,But after upgradation portal roles are not visible for users and Portal adminstors (J2EE_ADMIN ) also.
    Standard roles like System ,user and Content Admin roles also not visible.It shows only blank screen after login to portal.
    It is critial issue .Please suggest how to solve this issue.
    Thanks
    Srikanth M

    Make sure there are no errors in the browser in the bottom left hand corner. Also, are you using a fully wualified name to access the portal? When you were on SP17 were you using standard roles or did you make your own copy of the roles and assign your users to the copied roles?
    If you navigate to the portal content studio directly, can you see the role contents?
    After launching /useradmin and authenticating, paste http://host:50000/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!3aportal_content!2fadministrator!2fcontent_admin!2fcontent_admin_role!2fcom.sap.portal.content_admin_ws!2fcom.sap.portal.portal_content?sap-config-mode=true into your browser and you are in the content studio.

  • Follow-on documents are not visible in MIRO in TEST server, awsys = PRD300.

    Dear Experts ,
    The Test Server was refreshed around mid-June 2011 with data of
    Production Server. The follow-on documents are not visible for the
    invoice documents in MIRO in TEST server due to value in tables
    BKPF,RBKP : field : AWSYS = PRD300 .
    The newly created Purchase Orders after the refresh, the accounting
    documents can be seen for the Goods Receipt (MIGO_GR-display) and
    Invoice documents (MIRO).
    we had already raised this issue in March & got the feedback from SAP
    as shown below.
    accordingly we have developed & run the program "zzlogsys2" which
    updates the Logsys/Awsys field from PRD300 ( of production server ) to
    that of the current server i.e. TST300 as required.
    after which the FI documents for the material documents are visible in
    MIGO,but follow-on documents are not visible for the invoice documents
    in MIRO.
    we have Checked notes 781498 and 28958 to see if the logical system is
    correctly assigned , where we found that in table RBKP after entering document number, Fiscal Year , the
    Field AWSYS is "PRD300" & not "TST300" as it should be. We will take up the activity of updating table RBKP
    also as we are currently doing for tables MKPF & BKPF.
    But to have clear picture as to what we are doing is correct , pl
    advise about the following :
    1) Is it a correct process done by our SAP-Basis team , that every time
    any Server ( e.g. Test or Quality ) is refreshed with Production server
    data, the Field AWSYS in various transaction tables gets value as
    "PRD300" which then is required to replaced by running program such as
    ZZlogsys.
    REPORT ZZLOGSYS.
    TABLES: T000, MKPF.
    DATA: NEW_SYS LIKE MKPF-AWSYS.
    PARAMETER: OLD_SYS LIKE MKPF-AWSYS.
    SELECT SINGLE * FROM T000 WHERE MANDT EQ SY-MANDT.
    NEW_SYS = T000-LOGSYS.
    CHECK NOT NEW_SYS IS INITIAL.
    UPDATE MKPF SET AWSYS = NEW_SYS
    WHERE AWSYS = OLD_SYS.
    WRITE:/ 'Number of updates: ', SY-DBCNT.
    2) if the above process is correct & normal , then which are the other
    tables in a particular server ,apart from tables MKPF,BKPF,RBKP , which
    needs to be updated the value of field "AWSYS" in the same way
    replacing value "PRD300".
    3) if the process in point no. 1 is not correct , then what is the
    correct process that the Basis team can do while refreshing any target
    server with production data so that target server retains its value in
    Field AWSYS & not showing "PRD300".
    With 3 servers TEST,DEV & Quality , recently refreshed with production
    server to bring all servers in Sync for a HR patch application, we have
    this situation now in all 3 servers .
    Thanks in advance ,
    Anil Shanbhag

    It is appropriate to move this thread from ERP-MM to [Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP);
    Edited by: Jeyakanthan A on Jul 7, 2011 4:56 PM

  • BPM worklist app views are not visible in IPM task viewer

    Hi,
    we upgraded our system from 11.1.1.3.0 to
    weblogic 10.3.5.0
    SOA 11.1.1.5.0 with BPEL processes
    ECM with IPM and UCM 11.1.1.5.0
    after upgrade i have problem with profiles in IPM task viewer page. Views are created in BPM worklistapp and all users can see tasks assigned to them there. But those views are not visible in IPM task viewer page (i tried it using driver page). Because of missing profiles/views users can't see and process tasks assigned to them. In log files isn't raised any error message.
    Everything was working before upgrade. Can someone help me with this? What can i have wrong there?
    Thanks a lot in advance for any help
    Edited by: 914063 on Jun 20, 2012 12:56 PM
    Edited by: 914063 on Jun 20, 2012 12:57 PM

    Hi Renuka,
    There are basically two ways to create an ADF UI for a BPM Task:
    1. Generate it from the task
    2. Create a ADF Taskflow based on Human Workflow Task
    Since I tell this by heart, I might be slightly wrong in the terms.
    You probably want to try the second option. It is accessible from the "New Gallery". You'll have to provide the Human Task from the BPM project, but then you can build up the ADF Taskflow by your self, based on the customizations of the rest of your application.
    Should not be rocket science for someone with ADF11g experience. Since it is not my dayly job, I need to figure it out every time again ;). But I did it in the past and it wasn't so hard.
    Regards,
    Martien

  • In Business Rule child elements of Unbounded element are not visible.

    Hi All,
    Jdev version 11.1.1.7.0
    I am facing one issue in Business Rule...
    Scenario: I am creating Approval Service (BPEL) with Human Work flow and Bunises Rule.
    I am assingning participant in HW by using Rule based(Connecting HW and BR).
    Problem here is:
    Shema has "unbounded" element.
    <element name="ExpenseItem" maxOccurs="unbounded">
         <complexType>
          <sequence>
           <element name="ItemID" type="string"/>
           <element name="ItemName" type="string"/>
           <element name="ItemPrpjectID" type="string"/>
           <element name="ItemStatus" type="string"/>
          </sequence>
         </complexType>
        </element>
    Whenever I create Busines rules to configure rules.
    While configuring rules child elements of  ExpenseItem are not visible. But those are neccesary to configure rules.
    If you can help to me resolve would help.
    Is it a bedault behaviour of BR? If so how can i acheive this?
    Thanks,
    Santosh

    Solution found:
    Click on RuleSet which you have created.
    Expand Rule inside it.
    Enable Advanced mode and Tree mode and click OK.
    Select Root as Task and click on insert pattren and create pattren which is based on unbounded element (here its meant as fact)
    Once you create pattren , will be able access elements under unbounded element for Business rule configuration.

  • Changes made in Camer Raw are not visible in Bridge

    I'm editing the RAW images in Camera raw started from Bridge (Ctr- R). By returning to Bridge with "done" the changes are not visible. This worked until recently.
    s there any setting which prevents Bridge taking in consideration the info from the XMP file ?
    Re-starting Camera Raw I can see the changes from the previous session ...
    thanks in advance

    I love these quick solutions also. 

  • Text boxes are not visible

    Hello. A page in my InDesign document appears to be broken. Text boxes are not visible, they can only mark if I choose command + a. Then I can copy the object and paste into another document in which they appear. You can not delete the page when the crash program. What could be wrong?

    Re text boxes not visible try: View > Screen Mode > Normal.
    It's not a good idea to copy and paste, use Place: File > Place.
    Re your crashing, maybe you should reset your Preferences.
    Derek

  • Responses in PDF form are not visible

    I have Adobe Acrobat Pro XI installed and have produced a form which can be filled in by third parties.
    I have received a return in which the all of the responses are not visible unless I click in the field

    Most likely, the fault lies with the application used to fill in the forms,
    which is probably Apple Preview, that is known to cause this problem. You
    can fix the forms with this utility:
    http://blog.practicalpdf.com/2013/08/introducing-the-practicalpdf-fix-form-utility/
    And in the future instruct your users not to use Preview, but only Adobe
    Reader (or Adobe Acrobat).

  • Work items are not visible  UWL task are visible in tracking in portal

    HI
    Friends
    i  am new from sap Ess/Mss implementation project...
    i am facing an Problem " Work items are not visible under UWL in portal overview page"
    but i am configured  all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
    Requestor send an Leave through portal send it successfully......but i am facing  a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
    i am configured and also registered UWL IN PORTAL..it is good..
    in sap ecc i can assigned UWL_SERVICE user to roles
    1.SAP_BC_BMT_WFM_UWL_ADMIN    
    2.SAP_BC_BMT_WFM_UWL_END_USER
    3.SAP_BC_ADMIN_USER
    4.SAP_BC_UWL_SERVICE
    PLEASE HELP ME.
    Tanks
    Shaik Rafi

    Hi All,
    In such cases, please try to check as below :
    1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
    2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
    3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
    4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
    5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
    Revert if further help is needed with more info.
    Reward points if found useful.
    Regards,
    Shri vidya S

Maybe you are looking for