CUCCX Historical reporting - how to separate views

Hi Guys,
please dont you know how to make historical reporting reports accessible
per team - I mean, defined login to HR tool can see only reports for defined teams,
not for all of them.
We gotta CUCCX 7.0(2)
thanks
Tomas

Any agent who has 'Historical Reporting' capability can generate historical reports. Administrator grants 'Historical Reporting' capability to agents through appadmin. If an agent/supervisor has the capability, then he/she can view the reports for all the agents.We can not restrict based on teams. This is as per the design.
Please rate helpful posts.
GP.

Similar Messages

Re: UCCX 8.5. Historical Report how do i change the reporting interval?

Hi
The default reporting interval on historical reporting is one hour, how do I change this to 15 or 30 minutes?
Marsha

3rd Party, but...
http://leoparddocks.com/index.php

How can I view/display webi reports

Hi,
We are in the eprocess of implementing BI 4.0. If we go in for webi reports, How can I view/display/publish webi reports?
We dont have SAP EP, only ECC.
Regards,
priyA,

Hi,
the BI product packages it's own web application. Reporting content is published securely and viewed 'online' through the BI LaunchPad (previously infoview)
Regards,
H

Cisco UCCX Historical Reports Printing Issue

After a new installation of CUCCX Historical Reports 8.5 when the manager tries to print a report it is defaulting to save as a .xps document. If we select a physical printer in the box it reverts back to the save as .xps document, rinse and repeat. I've inculded a screen shot, thanks in advance for any assistance.

Hi Saeed
I'd agree with your comments. Personally I would incorporate them into the HRC report; I guess if you speak to Cisco about this it would be an 'enhancement request' at best that would take a long time to be resolved.
I've previously 'corrected' some reports like this one to allow proper summarisation etc but it requires some Crystal Reports knowledge & software..
Aaron

How can I view the USMT recovery key in SQL report

Hello all,
Can anyone help me to provide sql query for below link… What I am looking is Just to create a report with all computers that has computer association any type with the recovery key information.
http://www.windows-noob.com/forums/index.php?/topic/1763-how-can-i-view-the-usmt-recovery-key/
I have tried below but not working so looking for help…..
SELECT TOP (100) PERCENT dbo.v_StateMigration.SourceName, dbo.v_StateMigration.SiteCode, dbo.v_StateMigration.SMPServerName,
dbo.v_StateMigration.SourceMACAddresses, dbo.v_StateMigration.RestoreMACAddresses, dbo.StateMigration.StateEncryptDecryptKey,
dbo.StateMigration.StorePath, dbo.StateMigration.StoreSize
FROM dbo.StateMigration INNER JOIN
dbo.v_StateMigration ON dbo.StateMigration.SMPServerName = dbo.v_StateMigration.SMPServerName CROSS JOIN
dbo.v_UserStateMigration
WHERE (dbo.StateMigration.StorePath IS NOT NULL) AND (dbo.StateMigration.StoreSize IS NOT NULL)
ORDER BY dbo.v_StateMigration.SourceName

Try this.
SELECT Distinct
SM.SourceName,
SM.SiteCode,
SM.SMPServerName,
SM.SourceMACAddresses,
SM.RestoreMACAddresses,
SMT.StateEncryptDecryptKey,
SM.StorePath,
SM.StoreSize
FROM
dbo.v_StateMigration SM
JOIN dbo.v_UserStateMigration UM on SM.RestoreClientResourceID= UM.RestoreClientResourceID
join dbo.StateMigration SMT on SM.SMPServerName = SMT.SMPServerName
WHERE
(SM.StorePath IS NOT NULL)
AND (SM.StoreSize IS NOT NULL)
ORDER BY
SM.SourceName
http://www.enhansoft.com/

How to separate debit and credit values in gl statement report (daywise)

hi
experts,
i have report.
selection criteria is
chars of account.
gl account
date .
how to separate debit and credit values in gl statement?.(i know there is a indicator shkzg).
but send me code.
op
date, total credit,total debit , balances.
also calculate opening and closing balance.
u created such type of report then plz help me.
thanks&regards.\
ajay.

Hi,
Usually it can be determined using the field shkzg. If it contain 'S' its debit and if it contains 'H' then its credit.
Before showing the amount you need to do like;
IF wa_gl-shkzg = 'H'.
wa_gl-dmbtr = wa_gl-dmbtr * (-1). " dbmtr - amount
ENDIF.
This will solve your problem.
Regards
Karthik D
Edited by: Karthik D on Jun 3, 2009 12:29 PM

In iTunes 11 how can I view a playlist in a separate (new) window?

In iTunes 11 how can I view a playlist in a separate (new) window? I always did this by double-clicking the playlist. That doesn't work now!

found it - at least this is part of a solution -
http://www.betalogue.com/2012/12/04/itunes-11-edit-playlist-to-work-around-the-s ingle-window-limitation/
while the discussion in the link (here in this reply) does not tell us how to open a new window - it does tell us how to view any particular playlist and the entire library list at the same time in a split-window view - but there still does not appear to be a way to open two playlists at the same time.?

How to show more than one report in a same Viewer or Form

Dear all,
I have develop many reports with CrystaReport XI and I'm using the CrystalReportViewer to show each of them in VB6. My Question is: Can I show more than one report in a same Viewer? if i need to show the report1.rpt and report2.rpt in a same window how can I do it?
Sérgio Salazar - Brazilian VB developer

No and Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

How to see views created on query in a report.

Hi
Could you please help me out urgently?
I have a question regarding how to see views created on query in a report.
Is there any table or query through which we can see views created on Query?
Thanks & Regards
Neha

Hi,
If you created a view on any query,
What is view ?
once you execute the query and save the output as view right ?
But we can not see the view in query output.
Insted of executing the query, directly we can execute the view which you have saved as query output.
Open the BEX and search for the view insted of query then it will give you the out put directly.
I hope it will help you.
Regards,
Yerrabelli.

How to separate report layout sections in one report

All,
I'm trying to determine how to separate report layout sections in one report using Report Builder 10g. My requirement is to provide a user the ability to display a report in PDF, excel, RTF formats. How can I assign LayoutA to 'PDF' and 'RTF', LayoutB to 'Spreadsheet'?
I've attempted to utilize the Header and Main sections in the paper layout, which contain unique layouts of the same report, but during generation, both sections are being displayed.
Thanks
Edited by: Jdavis on Apr 10, 2009 10:56 PM

Hi there,
How are you running the report? If you are selecting different types of output before calling the report then you could pass a parameter that is checked at runtime in the report and suppresses the layouts you do not want using format triggers.
Mark

How to disable "View Report" button in reporting services

Is anyone know how to disable "View Report" button in reporting services, I know can do custom code in report properties, what is the code? I have tried something like this ***button1.enable=false, but it can not success.
Appreciate if anyone can reply me, thanks.

Hi,
The message box don't work on the web because it is of windowform box. Based on your further description, you might want to do the date parameter validation. If so, there is common way to do this:(assume the date parameter value inputed can't be less than 2007)
1) Intert a textbox and input the message used to show the end users if they input a invalidated date value for the parameter, and then set the textbox's hidden property to =iif(Year(Parameters!myPrameter.value) < 2007,false, true)
2) Insert a Rectangle control below the textbox created in step 1, and put all report items in it and set the Rectangle's hidden property to =IIF(Year(Parameters!myParameter.value)<2007,true,false)
After these, if the end users input the date value can meet the project requirement, the report will show the data the end users want, otherwise, the end users will see the error textbox to tell them the parameter value is incorrect.
Hope this help,
thanks,
Jerry

How to separate two mixed things in Disc report

Hi ,
does anybody know how to separate job numbers in Disc report . I did a sorting and gave totals by all other fields but a main job have three diff jobcodes where two of them has to be in one group and third one needs to be separated to see the total amount spend on that job . Can anybody pls help me on this .
Thanks
Shruthi

Hi,
If you have this grouping in many reports then you should consider putting the grouping calculation in a folder in the EUL.
You can sort the report using this calculation and set the sort type to be "Hidden" so that the calculation does not show in the report.
Rod West

How to use views in sql script report?

All all
Can any one tell how to use views in sql script report?

Most of the views are based on tables (or other views which are based on tables).
The view typically shows one org at a time based on the context that is set.
If you need records for all orgs, you need to use the underlying tables. Oracle typically names the tables with a _all suffix.
e.g. PO_HEADERS will show records for one org at a time. PO_HEADERS_ALL will show records for all orgs.
Hope this answers your question,
Sandeep Gandhi

How to know report log (statistic of viewed report)

Hi All,
I wanna know how to get viewed report log (statistic)
The statistic contains the name of query report, frequency using report based on user name.
Thank you,
Jane

Hi...for all of statistics you can find some infocubes and reports...you can read the documentation here...
http://help.sap.com/saphelp_nw70/helpdata/en/46/f9bd5b0d40537de10000000a1553f6/frameset.htm
Regards

How to disable the Unified CCX Historical Reports Scheduler

Hello All,
I'm trying to see if there is a way to disable the Historical Reports Scheduler from Auto-Starting when I boot up the PC (*i.e. My user PC).
The PC is running Windows XP, and the CCX Historical Reports App is running version 8.0(2.13).
I checked for it in services.msc program and also in each user's "StartUp" folder but cannot find where it is getting started from. Anyone know how I can prevent this from Auto-Starting? I don't actually have any reports scheduled and I really on use the Unified CCX Historical Reports app once in a while...
Any thoughts or suggestions would be much appreciated!
Thanks in Advance,
Matt

Hey Carlo, thanks for the reply.
Excellent, that did it! Thanks alot, very much appreciated... I couldn't remember the command to bring up that utility. I've been using Linux for the last few years for the most part and got a little rusty with some of the Windows stuff, so thanks!
Thanks Again,
Matt

CUCCX Historical reporting - how to separate views

Similar Messages

Maybe you are looking for