Cuci moc fails "Invalid CCMCIP authentication server configuration"

Installed the cuci moc add-in for my OCS R2 client but when trying to connect it fails.
The server status notification popup shows the following message:
Unknown Error.
[DeviceAdaptorInitiazationFailed] Invalid CCMCIP authentication server configuration. [1200]
Any help is welcome.
Thx

Issue has been resolved.
I downloaded the latest version of the cuci-moc software which only included the software.
The previous version 7.1.2.zip also included a cucimoc-Admin-ffr.7-1-2.zip, which has the Administration Toolkit.
This toolkit also included registry update and .adm files for policy setting.
CUCIMOC-CUCSFAdminData_GroupPolicy.reg
CUCIMOC-CUCSFAdminData_GroupPolicy.adm
I am now able to connect and can toggle between softphone and deskphone.
Thx for your support,

Similar Messages

CUCIMOC - Invalid CCMCIP authentication server configuration

Hi,
I've been trying to get CUCIMOC working on a test machine but i keep getting the error "Unknown Error. [DeviceAdaptorInitializationFailed] Invalid CCMCIP authentication server configuration. [1200].
Also, the server status has:
Server Address: blank
Server Port: blank
Server Protocol: blank
Status: Disconnected
see screenshots.
Also attached is the problem report.
Call Manager Version: 7.1.5.3
CUCIMOC Version: 7.1.4
Communicator 2007 R2 version: 3.5.6907.225
A CSF device has been set up on the call manager and my userID assigned to it.

Hi Karthik,
Thanks for the response,
To answer your points:
+ In CUCM Serviceability > Tools > Network Services, do you have Cisco
CallManager Cisco IP Phone (CCMCIP) service active and running?
I unfortunately don't have access to the serviceability page, i will have to contact someone from Telstra to have a look, but i would have thought they'd have set this up.
+ In your CUCM cluster, are you using CTL lists?
Unsure if we are using these, will have to confirm.
+ In CUCM, did you complete the steps in the URL link below:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucimoc/7_1/english/integrat/g
uide/config_servers.html#wp1054089
Yes, telstra completed these steps. we have integrated with AD and that is working fine as well as having created a CSF
+ On your MOC, can you see the conversation pane?;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucimoc/7_1/english/integrat/g
uide/troubleshooting.html#wp1055659
I am able to see the conversation pane, but many of the items are blanked out and when i hover over them, it says "Selected Device Unavailable. Select the title menu bar button. The select Tools > select device for conversation pane." when i do this the select softphone device is empty.
+ Between your MOC/OCS and CUCM, do you have a firewall?. If so, make sure
that you are not blocking the traffic shown in the URL link below: HTTP,
CTI-QBE, SIP
http://www.cisco.com/en/US/docs/voice_ip_comm/cucimoc/7_1/english/integrat/g
uide/plan.html#wp1052867
our firewall is not blocking that traffic.
Any other ideas?
Thanks
Shay Trinh

Failed to Connect to CCMCIP authentication server error

Hi All,
I am getting a strange error with a CM8 Cisco Unified client services framework client.
He is getting failed to connect to CCMIP authentication server.
The user is assoicated with a phone line.
He is in the CCM end users and standard CTI enabled group.
The phone is setup to be controlled via CTI.
I had one of the IT support guys use this users login to try and login using a different PC with the similar results.
This makes me wonder if the problem is with the users' profile on the Presence server somehow.
I will attach the problem report along with one of the error messages.
I have noted the problem with the voicemail server and will get the password fixed up soon.
Any help or ideas would be so appreciated.
Regards
Amanda

Hi All,
I am continuing to work on the problem.
I found something interesting in the core log file.
I will attach the new debug report.
If anyone has any ideas for how to fix this please let me know.
thanks
Amanda Lalli-Cafini
CredentialsType: PHONE_SERVICE, UserName:
Michael.O'[email protected]
, Remember: false
2012-03-01 13:43:22,595 DEBUG [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPProviderImpl.fetchDeviceList(90)] - Attempting to connect to primary CCMCIP host: 10.2.2.11
2012-03-01 13:43:22,595 WARN [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPClient.fetchDevices(241)] - Unknown certification level, setting it to SELF_SIGNED_CERTS. Unknown level value: null
2012-03-01 13:43:22,595 INFO [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPClient.fetchDevices(244)] - Setting certification level to '1' (SELF_SIGNED_CERTS)
2012-03-01 13:43:22,972 ERROR [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPClient.populate(323)] - JAXB unmarshal error! unexpected element (uri:"", local:"html"). Expected elements are <{}devices>
2012-03-01 13:43:22,973 ERROR [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPProviderImpl.fetchDeviceList(112)] - No backup configured, giving up
2012-03-01 13:43:22,973 WARN [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.populateCCMCIP(1563)] - Couldn't connect to any CCMCIP host. Sending async error.
2012-03-01 13:43:22,974 DEBUG [ws-pool-thread-2] [EventAdapter] [EventAdapterImpl.publish(140)] - publish method = onError class = com.cisco.uc.core.broker.phone.device.DeviceServiceCallback
2012-03-01 13:43:22,974 DEBUG [ws-pool-thread-2] [EventAdapter] [BaseClientProxy.publish(109)] - Adding callback to queue : onError priority message true
2012-03-01 13:43:22,974 WARN [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.populateCCMCIP(1581)] - CCMCIP host is unreachable. Trying to use the last used softphone device.
2012-03-01 13:43:22,974 ERROR [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.isSRSTConfigured(1672)] - Couldn't connect to any CCMCIP host and no softphone device is available.
2012-03-01 13:43:22,975 ERROR [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.populateCCMCIP(1599)] - Couldn't connect to any CCMCIP host and no softphone device is available.
2012-03-01 13:43:22,975 ERROR [ws-pool-thread-2] [DeviceAdapter] [DeviceServiceImpl.initialize(435)] - Problem initializing on the Device service. Could not connect to CCMCIP
com.cisco.uc.core.common.exceptions.device.CCMCIPFailureCoreException: Could not connect to CCMCIP
CredentialsType: PHONE_SERVICE, UserName: Michael.O'[email protected]
, Remember: false
2012-03-01 13:43:22,595 DEBUG [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPProviderImpl.fetchDeviceList(90)] - Attempting to connect to primary CCMCIP host: 10.2.2.11
2012-03-01 13:43:22,595 WARN [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPClient.fetchDevices(241)] - Unknown certification level, setting it to SELF_SIGNED_CERTS. Unknown level value: null
2012-03-01 13:43:22,595 INFO [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPClient.fetchDevices(244)] - Setting certification level to '1' (SELF_SIGNED_CERTS)
2012-03-01 13:43:22,972 ERROR [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPClient.populate(323)] - JAXB unmarshal error! unexpected element (uri:"", local:"html"). Expected elements are <{}devices>
2012-03-01 13:43:22,973 ERROR [ws-pool-thread-2] [CCMCIPProvider] [CCMCIPProviderImpl.fetchDeviceList(112)] - No backup configured, giving up
2012-03-01 13:43:22,973 WARN [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.populateCCMCIP(1563)] - Couldn't connect to any CCMCIP host. Sending async error.
2012-03-01 13:43:22,974 DEBUG [ws-pool-thread-2] [EventAdapter] [EventAdapterImpl.publish(140)] - publish method = onError class = com.cisco.uc.core.broker.phone.device.DeviceServiceCallback
2012-03-01 13:43:22,974 DEBUG [ws-pool-thread-2] [EventAdapter] [BaseClientProxy.publish(109)] - Adding callback to queue : onError priority message true
2012-03-01 13:43:22,974 WARN [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.populateCCMCIP(1581)] - CCMCIP host is unreachable. Trying to use the last used softphone device.
2012-03-01 13:43:22,974 ERROR [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.isSRSTConfigured(1672)] - Couldn't connect to any CCMCIP host and no softphone device is available.
2012-03-01 13:43:22,975 ERROR [ws-pool-thread-2] [DeviceService] [DeviceServiceCoreImpl.populateCCMCIP(1599)] - Couldn't connect to any CCMCIP host and no softphone device is available.
2012-03-01 13:43:22,975 ERROR [ws-pool-thread-2] [DeviceAdapter] [DeviceServiceImpl.initialize(435)] - Problem initializing on the Device service. Could not connect to CCMCIP
com.cisco.uc.core.common.exceptions.device.CCMCIPFailureCoreException: Could not connect to CCMCIP

NWDI for the 04s preview fails with 'SLD name-server configuration error'

After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.

Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan

Failed to remove Authentication Server on Wireless LAN controller

Cisco WLC 2500, software version: 7.6.100.0
I tried to remove the decommissioned Authentication Server from WLC web GUI but got popup window saying:
"Authentication Server could not be deleted as it is being used by either a WLAN ...."
I double checked on GUI and configs (show run-config commands) and the Authentication Server was NOT used anywhere.
Plus, I am unable to change the IP address so I can re-purpose it.
Any resolution?

1. Save the configuration.
2. Upload the Configuration to a computer.
3. Edit the Config file in a Notepad and remove the RADIUS server IP address.
4. Save the new file (do not override the backup, you may needed)
5. Download the customized configuration file into the WLC.
6. The WLC will automatically reboot.
7. It will boot up with the new configuration file without the RADIUS server.

Authentication failed: invalid user/password.

After uploading a new RPD in obiee( 11.1.1.5), my obiee has started failing with following error in nqserver.log. I have verified that BISystemUser password is the same in console and EM. I have also verified that I am entering correct RPD password while uploading it through EM. What else may be wrong ?
[2011-08-23T03:52:39.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b38396d0] [36007] Loading repository /product/obiee_11.1.1.5/instances/instance1/bifoundation/OracleBIServerComponent/coreapplication_obis1/repository/iipreports_BI0038.rpd.
[2011-08-23T03:52:40.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b0923b90] [14055] Loading subject area: AIP ...
[2011-08-23T03:52:40.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b0923b90] [14056] Finished loading subject area: AIP.
[2011-08-23T03:52:40.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b38396d0] [85003] MDX Member Name Cache subsystem started successfully.
[2011-08-23T03:52:40.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b38396d0] [85004] MDX Member Name Cache subsystem recovered entries: 0, size: 0 bytes.
[2011-08-23T03:52:40.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b38396d0] [13026] Error in getting roles from BI Security Service: 'Error Message From BI Security Service: [nQSError: 46164] HTTP Server returned 404 (Not Found) for URL .'
[2011-08-23T03:52:40.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b38396d0] nqsserver:     Clustered Oracle BI Server started. Version: 11.1.1.5.0.110427.0846.000.
[2011-08-23T03:52:44.000+00:00] [OracleBIServerComponent] [NOTIFICATION:1] [] [] [ecid: 004emGWVmAQAtHd5Tf^Ayc0000K2000000] [tid: b0923b90] [43071] A connection with Cluster Controller xxx.us.oracle.com:9706 was established.
[2011-08-23T03:52:46.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 004emGWtbaWAtHd5Tf^Ayc0000K3000001] [tid: b00beb90] Error Message From BI Security Service: [nQSError: 46164] HTTP Server returned 404 (Not Found) for URL .
[2011-08-23T03:52:46.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 004emGWtbaWAtHd5Tf^Ayc0000K3000001] [tid: b00beb90] [nQSError: 43126] Authentication failed: invalid user/password.
If I run opmnctl status then BIServer is up but the presentation services is down.
Following error is observed in sawlog0.log
[2011-08-22T22:52:46.000-05:00] [OBIPS] [ERROR:10] [] [saw.security.odbcuserpopulationimpl.initialize] [ecid: ] [tid: ] Authentication Failure.
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 43126] Authentication failed: invalid user/password. (08004)[[
File:odbcuserpoploaderimpl.cpp
Line:292
Location:
     saw.security.odbcuserpopulationimpl.initialize
     saw.catalog.local.loadCatalog
     saw.subsystems.catalogbootstrapper.loadcatalog
     saw.webextensionbase.init
     saw.sawserver
ecid:
[2011-08-22T22:52:46.000-05:00] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: ] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:712
Location:
     saw.sawserver
ecid:

Hi,
I have upgraded a existing OBIEE 10G file EBSAnalyticMaster.rpd to 11G using ua (upgrade assistant) and getting the same error while upgrading the catalog.
Presentation service is not starting. Do you have a solution yet.

Sql Server Configuration Manager fails to start

Hi,
My Os is Windows 7 Enterprise.
I have Sql Server 2008 Developer Edt. with sp1
and Sql Server 2005 express (which comes with Visual Studio)
When I try to open Configuration Manager it fails:
Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 and later server with SQL Server Configuration Manager.
Invalid class [0x80041010]
I've tried everything I could find on the net. But none of them worked for me.
Later, I realised that the file called "sqlwep-uni.mof" under "c:\Program Files\Microsoft SQL Server\MSSQL10.INSTANCENAME\MSSQL\Binn" has failed with mofcomp command.
Microsoft (R) MOF Compiler Version 6.1.7600.16385
Copyright (c) Microsoft Corp. 1997-2006. All rights reserved.
Parsing MOF file: sqlwep-uni.mof
MOF file has been successfully parsed
Storing data in the repository...
An error occurred while processing item 4 defined on lines 88 - 88 in file sqlwep-uni.mof:
Error Number: 0x8004100e, Facility: WMI
Description: Invalid namespace
Compiler returned error 0x8004100e
Any suggestions?

I think this can be fixed by parsing / registering the sqlmgmproviderxpsp2up mof file.
Have a look here - http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx
Thanks, Leks
That was the first thing I tried :)
I've also tried this: http://social.msdn.microsoft.com/Forums/en/sqltools/thread/468b8484-2729-4a06-bfc3-efe54507dcb6
and this: http://msmvps.com/blogs/martinpoon/archive/2009/11/27/sql-server-configuration-manager-cannot-connect-to-wmi-provider-invalid-class-0x80041010.aspx
and that: http://www.nucleustechnologies.com/Repair-WMI-Services.php
and some other stuff I could find.
At least I've tried to repair Sql 2008 installation. But it also did not work.
Lastly I've uninstalled all the instances and components related with sql. And I renamed the folders (C:\Program Files\Microsoft SQL Server and the hidden folder C:\ProgramData\Microsoft\Microsoft SQL Server) and made a clean install. Voila, it worked!
But the "Sql Server Configuration Manager"s icon has gone somewhere :) Anyway it works fine now.
I had to do that because I have a project to finish.
Poor Microsoft!

[nQSError: 43126]Authentication failed:invalid user/password, how to avoid?

Hi,
I encountered following error: [nQSError: 43126] Authentication failed: invalid user/password.
when I was starting weblogic server, and server used to shutdown.
After snooping around on net, came across this blog: http://obiee11gqna.blogspot.com/2011/09/obiee-11g-errors-nqserror-43113.html
Found that password for MDS & BIPLATFORM was 'expired', was able to solve my problem and my Presentation Services were up & running.
My question is, how to avoid password of MDS & BIPLATFORM from getting expired in future??
Regards,
Jitendra

Dpka,
Thanx for the link, it shows the way to avoid expiry of password.
I also found another link, in comment section which is equally useful: http://www.artofbi.com/index.php/2011/03/mds-or-biplatform-schema-password-change-considerations/
PS: Thanx to Deva as well for replying to my query.
Regards,
Jitendra

Oracle Calendar Server Configuration Assistant fails with Red Hat ES 4

I am trying to install Oracle Collaboration Suite 10.1.2 on a Red Hat ES 4 server platform.
I have installed with the Advanced Installation Option. The infra installation proceeds well then when i try to install the ocs application tier (different Oracle Home) the Calendar Server Configuration Assistant fail.
Output :
================================================================================================================
Output generated from configuration assistant "Calendar Server Configuration Assistant" (attempt 1):
Time zone selected: EBST3EBDT.Warning: Existing node(s) found in unison.ini. Using node 1 for configuration tasks.
Current State for Instance:ocsapp.lf-ocs1.lima_e_falcao.inet
Component Type Up Status In Sync Status
================================================================================
1 HTTP_Server HTTP_Server Up True
2 OC4J_Content OC4J Up True
3 OC4J_Mail OC4J Up True
4 OC4J_OCSADMIN OC4J Up True
5 OC4J_OCSClient OC4J Up True
6 OC4J_Portal OC4J Up True
7 OC4J_RM OC4J Down True(Disabled)
8 OC4J_Wireless OC4J Up True
9 OC4J_imeeting OC4J Up True
10 Service_Component_Cont OC4J Up True
11 home OC4J Up True
Warning: more than one process-type Element in the snippet. only the 1st one is appended
Error: can not append, there is a same named process type element in the exisitng ias-instance.ias-component
Error: Could not configure OPMN module information.
java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.runExternalProgram(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.configureOPMN(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.run(Unknown Source)
     at oracle.calendar.server.configuration.OCalConfig.main(Unknown Source)
3 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
oracle.sysman.emSDK.conf.TargetAdditionException: Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetInt(TargetInstaller.java:1148)
     at oracle.sysman.emSDK.conf.TargetInstaller.addTargetFromFile(TargetInstaller.java:1075)
     at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3669)
Target[oracle_calendar_ocal,ocsapp.lf-ocs1.lima_e_falcao.inet_Calendar Server] already present in /u01/oracle/product/10.1.2/ocs_2/sysman/emd/targets.xml
Warning: ocad.conf already included in /u01/oracle/product/10.1.2/ocs_2/Apache/Apache/conf/oracle_apache.conf.
Error: java.io.IOException: /u01/oracle/product/10.1.2/ocs_2/jdk/bin/java returned 1: Registration of ocal_targets.xml into targets.xml failed.unistart: Oracle Calendar Server 10.1.2.0.0
unistart: Copyright (c) 1993, 2005, Oracle.
unistart: All rights reserved.
unistart:
unistart: opmnctl: opmn is already running
unistart: opmnctl: starting opmn managed processes...
unistart: The Calendar Server started successfully.
Orclguest account has already been provisioned for Calendar.
Fatal Exception caught : java.lang.NullPointerExceptionopmnctl: stopping opmn managed processes...
Configuration assistant "Calendar Server Configuration Assistant" failed
================================================================================================================
Someone can help me?
Thanks a lot.

is it a reinstallation or a first one on a bare server ? if there were several attempts please be sure you cleaned evrything before launching the installation :
- product directory
- /etc/ora*
- database
- oraInventory
- /tmp (I had a similar issue with remaining files in /tmp, even after rebooting)
If it doesn't work, check that you don't hit the NO-EXCUTE problem (see the OCS 10.1.2 release notes, look for "noexec")

Sql server configuration manager remote procedure call failed(0x800706be)

Hi,
My Sql Server Management Studio working well. But When I open Sql server configuration manager I Got an error
“Remote procedure call failed (0x800706be)”
I tried Goggling the problem and solve it but I am not getting any valuable
solution. Is anyone solve this problem
I attach snap here
MySql Server Details:
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (X64) Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7600: )

This error appears to happen when .mof files (Managed Object Format (MOF)) don’t get installed and registered correctly during set-up. To resolve this issue, I executed
the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
Regards,
Basit A. Farooq (MSC Computing, MCITP SQL Server 2005 & 2008, MCDBA SQL Server 2000)
http://basitaalishan.com
cau u pls tell me how to type this command on command prompt. I also have the same error in sql server 2008. I allready have sql server 2008 sp2 installed. When I was trying to type this command as it it by copying this full command to command prompt it
shows that command not found as follows
C:\>mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmpr
oviderxpsp2up.mof"
Microsoft (R) MOF Compiler Version 6.1.7600.16385
Copyright (c) Microsoft Corp. 1997-2006. All rights reserved.
File 'C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2
up.mof' not found!
please tell me step by step
thanks
nravhad

SQL Server Configuration Manager – Cannot connect to WMI provider – Invalid class [0x80041010]

look at this post am getting the same
http://social.msdn.microsoft.com/Forums/en-US/sqlkjmanageability/thread/4c8ca86c-105f-4f0a-ac18-6e33dda2bc46
but when I tried the solution given there , It is not working
the error I am getting is mofcomp is not recognized as internal or external command
I tried in C:\program files\Microsoft sql server\90\shared and in Windows\system32
I am getting the same error

Hi sql393,
Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 servers with SQL Server Configuration Manager. Invalid class [0x80041010].
The solution is to go to a command prompt and then run mofcomp.
C:\Program Files\Microsoft SQL Server\90\Shared>mofcomp "C:\Program Files\Microsoft SQL Server\90\Shared\sqlmgmproviderxpsp2up.mof"
For more information, please refer to
http://blogs.msdn.com/b/echarran/archive/2006/01/03/509061.aspx
http://msmvps.com/blogs/martinpoon/archive/2009/11/27/sql-server-configuration-manager-cannot-connect-to-wmi-provider-invalid-class-0x80041010.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

Asynchronous reserve finally failed: missing name server configuration

Hi,
can anybody give me a hint why we get these errors?
"asynchronous reserveFinally failed: missing name server configuration, no logon known -> operation will be retried name reservation : name server=http://sapcoe01.bbn.hp.com:50000/, category=SAP_DevelopmentComponentName, name=hp.com/appl/tax, reservationKey=63415681, state=FINALIZE_PENDING"
The development objects are listed in SLD with status PRERES. The Name Server location is configured in DTR with the logon data. The name server is also listed in the development configuration.
Where else could be the cause for this error?
Many thanks for any hints!

Hi Martin,
Here you can see the *_PENDING items: http://<host>:50000/dtr/sysconfig/support/NameReservationList
And here you can configure the name server: http://<host>:50000/dtr/system-tools/administration/NameServerConfiguration
The solution is to define your name server a second time with a slightly different URL. The first entry you already defined probably uses the fully qualified hostname, e.g. http://<host>.mycompany.com:50000/sld/cimom. Define the same name server again but without the domain and without the /sld/cimom path, e.g. http://<host>:50000/. Actually it should correspond to what's shown in the error message, e.g. "operation will be retried name reservation : name server=http://<host>:50000/,". When you click Save Configuration, the pending items in the queue will be processed. The only problem we have left is that "after some time" the 2nd entry we just defined dissapears and we need to configure it again (and again and again...)
Kind regards,
Sigiswald

OIM 11G R2: OIM server configuration failed.

Hi,
oim server configuration failed because of below error. Please check the logs.kindly suggest a solution to fix it.
isJVMVendorIBM:false
updateMLSLocale:ORACLE_HOME :/home/oracle/app/Oracle/Middleware/Oracle_IDM1
updateMLSLocale:LOCALE_PROPERTIES_FILE :/home/oracle/app/Oracle/Middleware/Oracle_IDM1/inventory/Scripts/ext/jlib/oim/OIMLocales.properties
java.lang.Exception: Exception occured while encrypting the configuration and database
    at oracle.as.install.oim.config.util.EncryptConfigurationAndDB.encryptConfigurationAndDatbase(EncryptConfigurationAndDB.java:240)
    at oracle.as.install.oim.config.OIMConfigManager.encryptDB(OIMConfigManager.java:1467)
    at oracle.as.install.oim.config.OIMConfigManager.configureOIM(OIMConfigManager.java:1111)
    at oracle.as.install.oim.config.OIMConfigManager.doExecute(OIMConfigManager.java:659)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
    at java.lang.Thread.run(Thread.java:745)
Caused by: java.lang.Exception: Exception occured while encrypting the database
    at oracle.as.install.oim.config.util.EncryptDataBase.encryptDBContent(EncryptDataBase.java:160)
    at oracle.as.install.oim.config.util.EncryptConfigurationAndDB.encryptConfigurationAndDatbase(EncryptConfigurationAndDB.java:231)
    ... 12 more
Caused by: java.lang.Exception: Exception occured in updateMLSLocale method while updating Locale to OIM DB
    at oracle.as.install.oim.config.util.EncryptDataBase.updateMLSLocale(EncryptDataBase.java:319)
    at oracle.as.install.oim.config.util.EncryptDataBase.encryptDBContent(EncryptDataBase.java:125)
    ... 13 more
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV_OIM.UK_MLS_LOCALE_MLS_LOCALE_CODE) violated
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
    at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
    at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
    at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
    at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
    at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
    at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3904)
    at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1512)
    at oracle.as.install.oim.config.util.EncryptDataBase.updateMLSLocale(EncryptDataBase.java:311)
    ... 14 more
Thanks.

Remove below configuration and try again
highest approver title

Web server configuration failed with EPM 11.1.2.2 on Solaris 11

Hi,
When install & configured EPM 11.1.2.2, all components configuration success except web server configurations. In the
/export/epm/Middleware/EPMSystem11R1/diagnostics/logs/
[ERROR][EPMCFG-07236][oracle.EPMCFG][SRC_CLASS: com.hyperion.cis.config.ant.apache2.OHS2configurator]/export/epm/Middleware/user_projects/epmsystem1/httpConfig/ohs/config/OHS/ohs_component/httpd.conf wasn't found. OHS wasnt configured successfully, see oraInventory logs for more details"
The /export/epm has around 1.1T free disk space, and it had been set WRX permission for the 'epm' user. Please advise what might cause the above issue?
Thanks,
Jenny

Hi,
The OHS installation was showed as "Complete" in the EPM installation. Yes, there was "/export/epm/Middleware/user_projects/epmsystem1/httpConfig" directory.
Under "/export/epm/oraInventory/logs", it generated 4 files as "intsall*.log", "install*.out", "installActions*.log", and
"installProfile*.log" when I'm trying to configure the web server again with cfgtool. The logs are pretty long, and I'm not sure if the bellow messages indicate space problem or not in the "install*.log"?
[oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.genericQueries.getFreeSpaceForHome] [tid: 11] [ecid: 0000Jz5F64TFw000jzwkno1Hr7bm000002,0] errorString:
[2013-07-09T13:00:36.230-08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.genericQueries.getFreeSpaceForHome] [tid: 11] [ecid: 0000Jz5F64TFw000jzwkno1Hr7bm000002,0] Exiting method executeHandler
[2013-07-09T13:00:36.231-08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000Jz5F64TFw000jzwkno1Hr7bm000002,0] Handler launch end: genericQueries.getFreeSpaceForHome
[2013-07-09T13:00:36.231-08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000Jz5F64TFw000jzwkno1Hr7bm000002,0] Handler returned status: SUCCES
The "install*.out" had the error message as:
[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (ohsInstance3355595679)]:Skipping instance registration
ld.so.1: opmn: fatal: libcolntsh.sop.11.m1: open failed: No such filnctl startall: estarting opmn and all moracle.as.config.ProvisionException: Unable to start opmn
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:153)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createStandaloneASInstance(CreateASInstance.java:84)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureInstanceStandalone(WebtierConfigurationAction.java:590)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureStandalone(WebtierConfigurationAction.java:441)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.doExecute(WebtierConfigurationAction.java:174)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.Exception: Unable to start opmn
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.startOpmn(CreateASInstance.java:228)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:151)
... 13 more
a or directornage[CONFIG] FAILED:Create and Start AS Instance (ohsInstance3355595679)
y
d processes[CONFIG] [Web Tier Configuration] [Create and Start AS Instance (ohsInstance3355595679)]:Unable to start opmn
.[CONFIG] FAILED:Create and Start AS Instance (ohsInstance3355595679)
..Question Received:Unable to start opmn
[CONFIG] [Web Tier Configuration]:Unable to start opmn
oracle.as.config.ProvisionException: Unable to start opmn
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:153)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createStandaloneASInstance(CreateASInstance.java:84)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureInstanceStandalone(WebtierConfigurationAction.java:590)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureStandalone(WebtierConfigurationAction.java:441)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.doExecute(WebtierConfigurationAction.java:174)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: java.lang.Exception: Unable to start opmn
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.startOpmn(CreateASInstance.java:228)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:151)
... 13 more
opmnctgetting all the checkpoint properties..
l startall: failed.m_checkpointData:{}
Configuration:Web Tier Configuration failed
Error while running Configuration.
The configuration of Oracle WebTier and Utilities CD failed.
outputFile:/export/epm/oraInventory/logs/installProfile2013-07-09_02-00-32PM.log
The "install*Profile*.log" reported:
Processor Architecture : sparcv9
#The cycle speed of the CPU
CPU Speed : 0.0 GHz
#This is the number of CPUs available to the installer's JVM
CPU Number : 512 Processors.
#Available Swap space on this machine when installer started
Available Swap Space : 0 MB.
Somehow, it report the cpu speed as 0hz, and swap space also 0MB, but I have lots of swap space available(630G) shown from 'df -h' and 'swap -s'
Thanks!

Calender Server Configuration Assistant failed

Running on Red Hat Linux Enterprise edition 2.1.
Collaboration suite 9.0.4 (OCS R2).
Calender server configuration assistent failed with message:
Output generated from configuration assistant "Calendar Server Configuration
Assistant":
uniaddnode: Database initialization done
uniaddnode: node [2] has been successfully initialized
unistart: Oracle Calendar Server 9.0.4
unistart: Copyright (c) 1993, 2003, Oracle.
unistart: All rights reserved.
unistart:
unistart: unicheck working, please wait ...
unistart: Starting the Calendar Directory Access Server
**ERROR** unistart [error]: Error starting the Calendar Directory Access Server
unistart [error]: More details can be found in
unistart.log and in das.log.
**ERROR** Could not start the calendar server.
java.io.IOException: /home/oracle/midtier/ocal/bin/unistart: returned 1
Configuration assistant "Calendar Server Configuration Assistant" failed
Unistart.log and das.log does not provide any meaningful information on what is wrong.
------------------------------------------------------------------------------- DATE = Fri Aug 1 16:41:46 2003
PID = 20845; TID = 8192
ERROR CODE -> 0x40216
FUNCTION NAME -> Unistart::ProcessLocalStartServer()
Error starting the Calendar Directory Access Server.
All configuration assistants were successfully apart from the Calendar Server Configuration Assistent
Every prerequisite actions where taken according to Installations guide and
release notes.
All kernel parameters set.
The architecture is as follows:
Infrastructure and Storage RDBMS is installed on server A
and the middletier on server B.
All the components were successfully installed and configured on both servers apart for the Calendar server on middletier.
On server A the X-server was not running during the middletier installation.
We have tried the installation twice. The second time changing the
ip_local_port_range kernel from 61000 to 65000 as this parameter turned out not to have been correctly set in the first install.
Clues anyone?

I'm having a similar issue, and have opened a TAR for the problem. According to Oracle, it's the same error as the one received when the username is over 8 characters. Being that this is not the case in my environment, they are scratching their heads.
The only thing we can see as a possible user-name type issue is that the username and the group name are the same, though this is probably not the issue.
I'll post anything I find out.
Regards
Tait

Cuci moc fails "Invalid CCMCIP authentication server configuration"

Similar Messages

Maybe you are looking for