CUCM 10.5 High Availability Guide

Hello Experts,
I'm trying to enable redundancy and high availability on CUCM. I'm looking for documentation guides but can't find any. All I found is a guide for IM&P Presence Redundancy groups and HA. Is there such a document, if so, can you share the link to me?
I've already created a Unifed CM group but I want to make sure if that's all I needed to do. There are other things to consider like, extension mobility, MVA, etc. Also, how does the voice gateway know about the CUCM Subscriber? I need to make sure everything is operational if the Publisher goes down.
Thank you,
Randy C.

As far as phone registration goes, CUCM groups are all you need.
EM resiliency is discussed in the SRND
GW registration, that´s up to the protocol you use, either you configure a secondary MGCP registration, or a second DP with lower priority if H323/SIP

Similar Messages

HTTP Server High Availability

Hello All.
I have a question regarding OC4J and HTTP server High Availability.
I want to do something like the Figure 3-1 of the Oracle Application Server High Availability Guide 10.1.2. See this link
http://download-east.oracle.com/docs/cd/B14099_11/core.1012/b14003/midtierdesc.htm#CIHCEDFC
What I have now is the following:
Three hosts
Two of them are an OAS 10.1.2 which we already configured the Cluster and deployed our applications (used this tutorial: http://www.oracle.com/technology/obe/obe_as_1012/j2ee/deploy/j2eecluster/farmcluster.htm)
Let's say this nodes are:
- host1
- host2
The other one is the Oracle WebCache stand alone (will act as Load Balancer). We will call this
- hostwc3
We already configured the WebCache as Load Balancer and is working just fine. We also configured the session replication successful and work great with our applications.
What we have not clear is the following:
When a client try to visit http://hostwc3/application/ the LOAD BALANCER routes him to, let's say http://host1/application/ and in the browser's URL will not show the Virtual Server anymore (the webcache server) and will show the actual real Apache address (host1 )that is attending him. IF we "kill" on ENTIRE host1 (apache, oc4j, etc..) the clients WILL perceive the down and if they try to press F5, the will try to access to an Apache that doesn't is up and running.... The behavior expected is that the browser NEVER shows the actual Apache URL, so, when some apache goes down, the client do not disconnect (as it happens with and OC4J downfall ) and always works with the "virtual web server".
I came up with some ideas but I want you Guys to give me an advice:
- In Web Cache, do not route for load balancing to Apache, and route the Oc4J directly (Is this possible?)
- Configure a HTTP Server Cluster, this means that we have to have a "Virtual Name"to the Apaches (two of them). Is this possible? how?
- Use the rewrite mode of the Apache. Is this a good idea?
- Any other idea how to fix the Apache "Single Point Of Failure" ?
According with the figure 3-1 ( Link above ) we do can have HTTP Server in a cluster. But I have no idea how to manage it or configure it.
Thanks in advance any help!

You cannot point Outlook Anywhere to your DAG cluster IP address. It must be pointed to the actual IP address of either server.
For no extra cost DNS round robin is the best you will get, but it does have some drawbacks as it may give the IP address of a server you have taken down for maintenance or the server has an issue.
You could look to implement a load balancer but again if you are doing this for high availability then you want more than one load balancer in the cluster - otherwise you've just moved your single point of failure.
Having your existing NAT and just remembering to update it to point to the other server during maintenance may suit your needs for now.
If you can go into more detail about what the high availability your business is looking to achieve and the budget we can suggest the best method to meet those needs for the price point.
Have a great day
Oliver
Oliver Moazzezi | Exchange MVP, MCSA:M, MCITP:Exchange 2010,Exchange 2013, BA (Hons) Anim | http://www.exchange2010.com | http://www.cobweb.com | http://twitter.com/OliverMoazzezi

Oracle reports 10g High Availability

Clustering is deprecated with 10g application servers and High availability is recommended by Oracle for fail over of Report services (standalone).
I would like to get any incite , oracle references as to how the recommended solution could be implemented both for cold and hot fail over of report services within the same subnet.
the architecture of our environment is that two hosts (one of them being standby) run report services using namingservice discovery mechanism and requests are manually redirected to the standby service in case one of them fails.
how could this be transformed into hot fail over ?
Regards

Read the section on High Availabilty in the Publishing Reports to the Web manual, and the section on Reports in the High Availability Guide.

Office Web Apps farm - how to make it high available

Hi there,
I have deployed OWAs for Lync 2013 with two servers in one farm. When I was testing, e.g. the case when other server is down I found out the following error:
Log Name:      Microsoft Office Web Apps
Source:        Office Web Apps
Date:          17/03/2014 22:59:54
Event ID:      8111
Level:         Error
Computer:      OWASrv02.domain.com
Description:
A Word or PowerPoint front end failed to communicate with backend machine
http://OWASrv01:809/pptc/Viewing.svc
Does that means, that OWAs cannot setup as high avaiable when using standalone OWAs only? Above error appeared when the server OWASrv01 was rebooting.
Petri

Hi Petri,
For your scenario, you have achieve a  high performance for your Office Web Apps farm but not high availability.
For performing a high availability Office Web Apps farm, you can refer to the blog:
http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers
if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Eric Tao
TechNet Community Support

Error while installing NW 7.4 SR2 in High availability

Hello Guys,
We are installing NW 7.4 SR2 Enterprise Portal with sybase database on windows 2012 R2 server under high availability i.e Microsoft Cluster.
JEP is the system ID of the server, SAPJEP is the virtual host and X.X.X.36 is the virtual I.P for Central Instance node.
Physical I.P of First node is X.X.X.21
We have started the installation as first cluster node and get stuck at phase 3.
The error in sapinst.log is below:-
FCO-00011 The step assignNetworknameToClusterGroup with step key
|NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|assignNetworknameToClusterGroup
was executed with status ERROR ( Last error reported by the step: Could
not set properties on ClusterResource 'SAP JEP IP'.).
The error log of sapinst_dev.log is is below:-
TRACE      2015-03-18 11:30:29.193
NWInstance.getStartProfilePath(true)
TRACE      2015-03-18 11:30:29.194
NWInstance.getStartProfileName()
TRACE      2015-03-18 11:30:29.194
NWInstance.getStartProfileName() done: JEP_ERS10_SAPJEP
TRACE      2015-03-18 11:30:29.194
NWERSInstance.getDirProfile()
TRACE      2015-03-18 11:30:29.194
NW.getDirProfile(false)
TRACE      2015-03-18 11:30:29.195
NW.getDirProfile() done: \\SAPJEP/sapmnt/JEP/SYS/profile
TRACE      2015-03-18 11:30:29.204 [synxcpath.cpp:925]
          CSyPath::getOSNodeType(bool) lib=syslib module=syslib
Path \\SAPJEP/sapmnt/JEP/SYS/profile is on a non-existing share.
TRACE      2015-03-18 11:30:29.204
NWERSInstance.getDirProfile() done: \\SAPJEP/sapmnt/JEP/SYS/profile
TRACE      2015-03-18 11:30:29.205
NWInstance.getStartProfilePath() done: \\SAPJEP/sapmnt/JEP/SYS/profile/JEP_ERS10_SAPJEP
TRACE      2015-03-18 11:30:29.206
NWInstance.getProfilePath() done: \\SAPJEP/sapmnt/JEP/SYS/profile/JEP_ERS10_SAPJEP
TRACE      2015-03-18 11:30:29.206
NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile()
TRACE      2015-03-18 11:30:29.207
NW.getPersistentDefaultProfile()
TRACE      2015-03-18 11:30:29.207
NW.isUnicode(true)
TRACE      2015-03-18 11:30:29.208
NW.isUnicode() done: true
TRACE      2015-03-18 11:30:29.208
NW.getPersistentDefaultProfile() done
TRACE      2015-03-18 11:30:29.208
NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile() done
TRACE      2015-03-18 11:30:29.208
NWProfiles(JEP.ERS10.SAPJEP)._getPersistentProfile(INSTANCE) done
TRACE      2015-03-18 11:30:29.209
NWProfiles(JEP.ERS10.SAPJEP).getPersistentProfile() done
TRACE      2015-03-18 11:30:29.209
PersistentR3Profile.commit()
TRACE      2015-03-18 11:30:29.209
PersistentR3Profile.commit() done
TRACE      2015-03-18 11:30:29.209
NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile()
TRACE      2015-03-18 11:30:29.210
NW.getPersistentDefaultProfile()
TRACE      2015-03-18 11:30:29.210
NW.isUnicode(true)
TRACE      2015-03-18 11:30:29.211
NW.isUnicode() done: true
TRACE      2015-03-18 11:30:29.211
NW.getPersistentDefaultProfile() done
TRACE      2015-03-18 11:30:29.211
NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile() done
TRACE      2015-03-18 11:30:29.211
PersistentR3Profile.commit()
TRACE      2015-03-18 11:30:29.211
PersistentR3Profile.commit() done
TRACE      2015-03-18 11:30:29.212
NWProfiles(JEP.ERS10.SAPJEP).commit() done
TRACE      2015-03-18 11:30:29.212
NWInstanceInstall.addSAPCryptoParametersToProfile() done
TRACE      2015-03-18 11:30:29.260
The step setProfilesForSAPCrypto with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0|NW_SAPCrypto|ind|ind|ind|ind|crypto|0 has been executed successfully.
INFO      2015-03-18 11:30:29.262 [synxccuren.cpp:887]
          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
          lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
TRACE      2015-03-18 11:30:29.265 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:29.267 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:29.270 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:29.280 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:29.281 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:29.284 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:29.293 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:29.295 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:29.315 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO      2015-03-18 11:30:29.330 [csistepexecute.cpp:1024]
Execute step askUnpack of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0
TRACE      2015-03-18 11:30:29.339 [csistepexecute.cpp:1079]
Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0|askUnpack returns TRUE
TRACE      2015-03-18 11:30:29.364
Call block: NW_Unpack2_ind_ind_ind_ind
    function: NW_Unpack2_ind_ind_ind_ind_DialogPhase_askUnpack
is validator: false
TRACE      2015-03-18 11:30:29.364
NWInstall.getSystem(JEP)
TRACE      2015-03-18 11:30:29.366
NWOption(localExeDir).value()
TRACE      2015-03-18 11:30:29.366
NWOption(localExeDir).value() done: true
TRACE      2015-03-18 11:30:29.367
NWOption(collected).value()
TRACE      2015-03-18 11:30:29.367
NWOption(collected).value() done: true
TRACE      2015-03-18 11:30:29.369
NWInstall({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE      2015-03-18 11:30:29.370
NW({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE      2015-03-18 11:30:29.371
NW() done
TRACE      2015-03-18 11:30:29.371
NWInstall() done
TRACE      2015-03-18 11:30:29.371
NWInstall.getSystem() done
TRACE      2015-03-18 11:30:29.372
NWInstall.mapUnpackTable(t_askUnpack)
TRACE      2015-03-18 11:30:29.373
NWInstall.mapUnpackTable() done: true
TRACE      2015-03-18 11:30:29.377
NWDB._get(JEP, ind)
TRACE      2015-03-18 11:30:29.377
NWDB._fromTable(JEP, ctor)
TRACE      2015-03-18 11:30:29.379
NWDB(JEP, {
sid:JEP
hostname:undefined
dbsid:undefined
installDB:false
ORACLE_HOME:
abapSchema:
abapSchemaUpdate:
javaSchema:
TRACE      2015-03-18 11:30:29.379
NWDB() done
TRACE      2015-03-18 11:30:29.379
NWDB._fromTable() done
TRACE      2015-03-18 11:30:29.380
NWDB._get() done
TRACE      2015-03-18 11:30:29.380
NWDB.getDBType(): ind
TRACE      2015-03-18 11:30:29.390 [iaxxgenimp.cpp:283]
          CGuiEngineImp::showDialogCalledByJs()
showing dlg d_nw_ask_unpack
TRACE      2015-03-18 11:30:29.390 [iaxxgenimp.cpp:293]
          CGuiEngineImp::showDialogCalledByJs()
<dialog sid="d_nw_ask_unpack">
<title>Unpack Archives</title>
<table enabled="true" fixedrows="true" sid="askUnpack">
<caption>Archives to Be Unpacked</caption>
<column enabled="true" type="check" numeric="false" upper="false" name="unpack">
<caption>Unpack</caption>
<helpitem id="common.Unpack"/>
<value type="string">false</value>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="path">
<caption>Archive</caption>
<helpitem id="common.UnpackArchive"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="codepage">
<caption>Codepage</caption>
<helpitem id="common.UnpackArchiveCodepage"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="destination">
<caption>Destination</caption>
<helpitem id="common.UnpackArchiveDestination"/>
</column>
<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
<caption>Downloaded To</caption>
<helpitem id="common.UnpackArchiveDownload"/>
<value type="string"/>
</column>
<row rowId="0">
<boolvalue>
<true/>
</boolvalue>
<value>DBINDEP\SAPEXE.SAR</value>
<value>Unicode</value>
<value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
<value></value>
</row>
</table>
<dialog/>
TRACE      2015-03-18 11:30:29.391 [iaxxgenimp.cpp:1031]
          CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE      2015-03-18 11:30:30.617 [iaxxdlghnd.cpp:96]
          CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE      2015-03-18 11:30:30.618 [iaxxcdialogdoc.cpp:190]
          CDialogDocument::submit()
<dialog sid="d_nw_ask_unpack">
<table enabled="true" fixedrows="true" sid="askUnpack">
<caption>Archives to Be Unpacked</caption>
<column enabled="true" type="check" numeric="false" upper="false" name="unpack">
<caption>Unpack</caption>
<helpitem id="common.Unpack"/>
<value type="string">false</value>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="path">
<caption>Archive</caption>
<helpitem id="common.UnpackArchive"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="codepage">
<caption>Codepage</caption>
<helpitem id="common.UnpackArchiveCodepage"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="destination">
<caption>Destination</caption>
<helpitem id="common.UnpackArchiveDestination"/>
</column>
<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
<caption>Downloaded To</caption>
<helpitem id="common.UnpackArchiveDownload"/>
<value type="string"/>
</column>
<row rowId="0">
<boolvalue>
<true/>
</boolvalue>
<value>DBINDEP\SAPEXE.SAR</value>
<value>Unicode</value>
<value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
<value/>
</row>
</table>
<dialog/>
TRACE      2015-03-18 11:30:30.646
Call block: NW_Unpack2_ind_ind_ind_ind
    function: NW_Unpack2_ind_ind_ind_ind_DialogPhase_askUnpackValidator_default
is validator: true
TRACE      2015-03-18 11:30:30.646
NWInstall.getSystem(JEP)
TRACE      2015-03-18 11:30:30.648
NWOption(localExeDir).value()
TRACE      2015-03-18 11:30:30.648
NWOption(localExeDir).value() done: true
TRACE      2015-03-18 11:30:30.649
NWOption(collected).value()
TRACE      2015-03-18 11:30:30.649
NWOption(collected).value() done: true
TRACE      2015-03-18 11:30:30.652
NWInstall({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE      2015-03-18 11:30:30.653
NW({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE      2015-03-18 11:30:30.654
NW() done
TRACE      2015-03-18 11:30:30.654
NWInstall() done
TRACE      2015-03-18 11:30:30.654
NWInstall.getSystem() done
TRACE      2015-03-18 11:30:30.655
NWInstall.validateUnpackTable(t_askUnpack)
TRACE      2015-03-18 11:30:30.657
NWInstall.validateUnpackTable(): validating row {
codepage:Unicode
destination:E:\usr\sap\JEP\SYS\exe\uc\NTAMD64
ownPath:
path:DBINDEP\SAPEXE.SAR
sid:JEP
unpack:true
TRACE      2015-03-18 11:30:30.659 [tablecpp.cpp:136]
          Table(t_NW_unpack).updateRow({
cd:UKERNEL
codepage:Unicode
confirmUnpack:
destination:E:\usr\sap\JEP\SYS\exe\uc\NTAMD64
list:
needUnpacking:true
ownPath:
path:DBINDEP\SAPEXE.SAR
selectiveExtract:false
sid:JEP
unpack:true
wasUnpacked:false
}, WHERE sid='JEP' AND path='DBINDEP\SAPEXE.SAR' AND codepage='Unicode' AND destination='E:\usr\sap\JEP\SYS\exe\uc\NTAMD64')
updating
TRACE      2015-03-18 11:30:30.661
NWInstall.validateUnpackTable() done
TRACE      2015-03-18 11:30:30.722 [iaxxgenimp.cpp:301]
          CGuiEngineImp::showDialogCalledByJs()
<dialog sid="d_nw_ask_unpack">
<table enabled="true" fixedrows="true" sid="askUnpack">
<caption>Archives to Be Unpacked</caption>
<column enabled="true" type="check" numeric="false" upper="false" name="unpack">
<caption>Unpack</caption>
<helpitem id="common.Unpack"/>
<value type="string">false</value>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="path">
<caption>Archive</caption>
<helpitem id="common.UnpackArchive"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="codepage">
<caption>Codepage</caption>
<helpitem id="common.UnpackArchiveCodepage"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="destination">
<caption>Destination</caption>
<helpitem id="common.UnpackArchiveDestination"/>
</column>
<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
<caption>Downloaded To</caption>
<helpitem id="common.UnpackArchiveDownload"/>
<value type="string"/>
</column>
<row rowId="0">
<boolvalue>
<true/>
</boolvalue>
<value>DBINDEP\SAPEXE.SAR</value>
<value>Unicode</value>
<value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
<value/>
</row>
</table>
<dialog/>
TRACE      2015-03-18 11:30:30.724 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:30.725 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:30.728 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:30.776
The step askUnpack with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0 has been executed successfully.
INFO      2015-03-18 11:30:30.778 [synxccuren.cpp:887]
          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
          lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
TRACE      2015-03-18 11:30:30.780 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:30.781 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:30.785 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:30.802 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:30.803 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:30.806 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:30.819 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:30.842 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE      2015-03-18 11:30:30.908 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:30.909 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:30.963 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE      2015-03-18 11:30:31.139 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO      2015-03-18 11:30:31.142 [csistepexecute.cpp:1024]
Execute step setDisplayNames of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0
TRACE      2015-03-18 11:30:31.177
Call block: NW_FirstClusterNode_ind_ind_ind_ind
    function: NW_FirstClusterNode_ind_ind_ind_ind_DialogPhase_setDisplayNames_Preprocess
is validator: false
TRACE      2015-03-18 11:30:31.219 [csistepexecute.cpp:1079]
Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|setDisplayNames returns TRUE
TRACE      2015-03-18 11:30:31.243
Call block: NW_FirstClusterNode_ind_ind_ind_ind
    function: NW_FirstClusterNode_ind_ind_ind_ind_DialogPhase_setDisplayNames
is validator: false
TRACE      2015-03-18 11:30:31.246
NWInstance.byNumberAndRealHost(00, DCEPPRDCI)
TRACE      2015-03-18 11:30:31.246
NWInstance.find()
TRACE      2015-03-18 11:30:31.248
NWOption(localExeDir).value()
TRACE      2015-03-18 11:30:31.248
NWOption(localExeDir).value() done: true
TRACE      2015-03-18 11:30:31.249
NWOption(collected).value()
TRACE      2015-03-18 11:30:31.249
NWOption(collected).value() done: true
TRACE      2015-03-18 11:30:31.252
NWInstance._fromRow({
sid:JEP
name:SCS00
number:00
host:SAPJEP
guid:0
realhost:dcepprdci
type:SCS
installationStatus:installing
startProfileName:JEP_SCS00_SAPJEP
instProfilePath:
dir_profile:
unicode:false
collectSource:
TRACE      2015-03-18 11:30:31.252
NWSCSInstance()
TRACE      2015-03-18 11:30:31.252
NWInstance(JEP/SCS00/SAPJEP)
TRACE      2015-03-18 11:30:31.252
NWInstance(JEP/SCS00/SAPJEP) done
TRACE      2015-03-18 11:30:31.253
NWInstanceInstall()
TRACE      2015-03-18 11:30:31.253
NWInstanceInstall() done
TRACE      2015-03-18 11:30:31.253
NWInstall.getSystem(JEP)
TRACE      2015-03-18 11:30:31.253
NWOption(localExeDir).value()
TRACE      2015-03-18 11:30:31.254
NWOption(localExeDir).value() done: true
TRACE      2015-03-18 11:30:31.254
NWOption(collected).value()
TRACE      2015-03-18 11:30:31.254
NWOption(collected).value() done: true
TRACE      2015-03-18 11:30:31.256
NWInstall({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE      2015-03-18 11:30:31.257
NW({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE      2015-03-18 11:30:31.258
NW() done
TRACE      2015-03-18 11:30:31.258
NWInstall() done
TRACE      2015-03-18 11:30:31.258
NWInstall.getSystem() done
TRACE      2015-03-18 11:30:31.258
NWSCSInstance() done
TRACE      2015-03-18 11:30:31.259
NWInstance._fromRow() done
TRACE      2015-03-18 11:30:31.259
NWInstance._fromRow({
sid:JEP
name:ERS10
number:10
host:SAPJEP
guid:1
realhost:dcepprdci
type:ERS
installationStatus:installing
startProfileName:JEP_ERS10_SAPJEP
instProfilePath:
dir_profile:
unicode:false
collectSource:
TRACE      2015-03-18 11:30:31.259
NWERSInstance()
TRACE      2015-03-18 11:30:31.260
NWInstance(JEP/ERS10/SAPJEP)
TRACE      2015-03-18 11:30:31.260
NWInstance(JEP/ERS10/SAPJEP) done
TRACE      2015-03-18 11:30:31.260
NWInstanceInstall()
TRACE      2015-03-18 11:30:31.260
NWInstanceInstall() done
TRACE      2015-03-18 11:30:31.261
NWERSInstance() done
TRACE      2015-03-18 11:30:31.261
NWInstance._fromRow() done
TRACE      2015-03-18 11:30:31.261
NWInstance.find() done: 1 instances found
TRACE      2015-03-18 11:30:31.261
t_scs.setDisplayName([nw.progress.installInstance, SCS00], WHERE ROWNUM=0)
TRACE      2015-03-18 11:30:31.305
The step setDisplayNames with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0 has been executed successfully.
INFO      2015-03-18 11:30:31.307 [synxccuren.cpp:887]
          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
          lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
TRACE      2015-03-18 11:30:31.362
Build Client for subcomponent |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_FinishFirstClusterNode|ind|ind|ind|ind|finishFirst|0
TRACE      2015-03-18 11:30:31.364
TRACE      2015-03-18 11:30:31.364 [ccdclient.cpp:22]
          CCdClient::CCdClient()
TRACE      2015-03-18 11:30:31.385 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:31.387 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:31.390 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:31.406 [cpropertycontentmanager.hpp:220]
          CPropertyContentManager::logMissingParameters()
The following parameters can be set via SAPINST_PARAMETER_CONTAINER_URL (inifile.xml) but not via SAPINST_INPUT_PARAMETERS_URL:
Component 'NW_ERS_Instance': ersInstanceNumber, restartSCS
Component 'NW_GetDomainOU': isOUInstallation, ou_delimiter, windows_domain_ous
Component 'NW_GetSidFromCluster': clusterGroup, isUnicode, localDrive, network, networkName, sharedDrive, sid, useDHCP
Component 'NW_GetUserParameterWindows': sapDomain, sapServiceSIDPassword, sidAdmPassword
Component 'NW_SAPCrypto': installSAPCrypto
Component 'NW_SCS_Instance': instanceNumber, scsMSPort, scsMSPortInternal
Component 'Preinstall': installationMode
INFO      2015-03-18 11:30:31.802 [synxcpath.cpp:799]
          CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\summary.html.
TRACE      2015-03-18 11:30:31.828 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:31.852 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE      2015-03-18 11:30:31.916 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:31.917 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:31.971 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE      2015-03-18 11:30:32.152 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:32.154 [sixxbsummary.cpp:320]
          CSiSummaryContainer::showDialog()
<?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog version="1.0" sid="diReviewDialog"> <title>Parameter Summary</title><description>Choose 'Next' to start with the values shown. Otherwise, select the parameters to be changed and choose 'Revise'. You are then taken to the screen where you can change the parameter. You might be guided through other screens that have so far been processed.</description> <review id="review_controll"><caption><![CDATA[Parameter list]]></caption><inputgroup id="ID_1"> <caption><![CDATA[Drive for Local Instances]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_2"><pulldown edit="false" enabled="true" highlight="false" sid="localDrive">
<caption>Destination Drive for Local Instances</caption>
<helpitem id="mscs.SelectLocalDrive"/>
<value>C:</value>
<value>D:</value>
<selectvalue>D:</selectvalue>
</pulldown></input></inputgroup><inputgroup id="ID_3"> <caption><![CDATA[SAP System Cluster Parameters]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_4"><field enabled="true" highlight="false" sid="sid">
<caption>SAP System ID (SAPSID)</caption>
<helpitem id="common.SAPSystemIDCIDB"/>
<value type="upper" maxlength="3" regexp="^[A-Z][A-Z0-9]{2}" minlength="3">JEP</value>
</field></input><input id="ID_5"><field enabled="true" highlight="false" sid="networkName">
<caption>Network Name (SAP Virtual Instance Host)</caption>
<helpitem id="common.VirtualInstanceHostWindowsMSCS"/>
<value type="string" maxlength="13" minlength="1">SAPJEP</value>
</field></input><input id="ID_6"><pulldown edit="false" enabled="true" highlight="false" sid="network">
<caption>Use Public Network</caption>
<helpitem id="mscs.UsePublicNetwork"/>
<value>Cluster Network 1</value>
<selectvalue>Cluster Network 1</selectvalue>
</pulldown></input><input id="ID_7"><pulldown edit="false" enabled="true" highlight="false" sid="sharedDrive">
<caption>Destination Drive for Clustered Instances</caption>
<helpitem id="mscs.SelectSharedDrive"/>
<value>BACKUP</value>
<value>SAP_USR_SID_CI_NODE</value>
<value>SAPDATA1</value>
<value>SAPDATA2</value>
<value>SAPDATA3</value>
<value>SAPDATA4</value>
<value>SAPLOG1</value>
<value>SAPLOG2</value>
<value>SAPTEMP_SAPDIAG_SAPSYBSYSTEM</value>
<value>SYBASE</value>
<selectvalue>SAP_USR_SID_CI_NODE</selectvalue>
</pulldown></input></inputgroup><inputgroup id="ID_8"> <caption><![CDATA[DNS Domain Name]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_9"><check enabled="true" highlight="false" sid="setFQDN">
<caption>Set FQDN for SAP system</caption>
<helpitem id="common.FullyQualifiedDomainNameSelect"/>
<boolvalue>
<true/>
</boolvalue>
</check></input><input id="ID_10"><field enabled="true" highlight="false" sid="FQDN" depends="setFQDN">
<caption>DNS Domain Name for SAP System</caption>
<helpitem id="common.FullyQualifiedDomainName"/>
<value type="string" regexp="^[^.]+.*$" minlength="1">jnport.com</value>
</field></input></inputgroup><inputgroup id="ID_11"> <caption><![CDATA[Windows Domain]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_12"><radiobox enabled="true" highlight="false" sid="domainType">
<caption>Domain Model</caption>
<helpitem id="common.DomainModelDomainLocal"/>
<radio enabled="true" sid="global">
<caption>Domain of Current User</caption>
<boolvalue>
<true/>
</boolvalue>
</radio>
<radio enabled="true" sid="other">
<caption>Different Domain</caption>
</radio>
</radiobox></input></inputgroup><inputgroup id="ID_13"> <caption><![CDATA[Operating System Users]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_14"><password confirm="true" enabled="true" highlight="false" sid="sidAdmPassword">
<caption>Password of SAP System Administrator</caption>
<helpitem id="common.PasswordCreateExistsOS"/>
<encrvalue maxlength="63">*****</encrvalue>
</password></input><input id="ID_15"><password confirm="true" enabled="true" highlight="false" sid="sapServiceSIDPassword">
<caption>Password of SAP System Service User</caption>
<helpitem id="common.PasswordCreateExistsOS"/>
<encrvalue maxlength="63">*****</encrvalue>
</password></input></inputgroup><inputgroup id="ID_16"> <caption><![CDATA[Windows Domain for SAP Host Agent]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_17"><radiobox enabled="true" highlight="false" sid="domainType">
<caption>Domain Model</caption>
<helpitem id="common.DomainModelDomainLocal"/>
<radio enabled="true" sid="local">
<caption>Local Domain</caption>
<boolvalue>
<true/>
</boolvalue>
</radio>
<radio enabled="true" sid="global">
<caption>Domain of Current User</caption>
</radio>
<radio enabled="true" sid="other">
<caption>Different Domain</caption>
</radio>
</radiobox></input></inputgroup><inputgroup id="ID_18"> <caption><![CDATA[Operating System Users]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_19"><password confirm="true" enabled="true" highlight="false" sid="sidAdmPassword">
<caption>Password of SAP System Administrator</caption>
<helpitem id="common.PasswordCreateExistsOS"/>
<encrvalue maxlength="63">*****</encrvalue>
</password></input></inputgroup><inputgroup id="ID_20"> <caption><![CDATA[SCS Instance]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_21"><field enabled="true" highlight="false" sid="instanceNumber">
<caption>SCS Instance Number</caption>
<helpitem id="common.InstanceNumberCreate"/>
<value type="string" maxlength="2" regexp="[0-9]{2}" minlength="2">00</value>
</field></input></inputgroup><inputgroup id="ID_22"> <caption><![CDATA[Java Message Server Port]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_23"><field enabled="true" highlight="false" sid="scsMSPortInternal">
<caption>Internal Java Message Server Port</caption>
<helpitem id="common.InternalMessagePort"/>
<value type="numeric" maxlength="5" min="1025" max="65535">3900</value>
</field></input></inputgroup><inputgroup id="ID_24"> <caption><![CDATA[Enqueue Replication Server Instance]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_25"><field enabled="true" highlight="false" sid="ersInstanceNumber">
<caption>Number of the ERS Instance</caption>
<helpitem id="common.InstanceNumberCreate"/>
<value type="numeric" maxlength="2" max="99" minlength="2">10</value>
</field></input><input id="ID_26"><field enabled="true" highlight="false" sid="ersVirtualHostname">
<caption>ERS Instance - Virtual Host Name</caption>
<helpitem id="common.virtualHostname"/>
<value type="string" maxlength="60" minlength="1">SAPJEP</value>
</field></input></inputgroup><inputgroup id="ID_27"> <caption><![CDATA[Unpack Archives]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_28"><table enabled="true" fixedrows="true" sid="askUnpack">
<caption>Archives to Be Unpacked</caption>
<column enabled="true" type="check" numeric="false" upper="false" name="unpack">
<caption>Unpack</caption>
<helpitem id="common.Unpack"/>
<value type="string">false</value>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="path">
<caption>Archive</caption>
<helpitem id="common.UnpackArchive"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="codepage">
<caption>Codepage</caption>
<helpitem id="common.UnpackArchiveCodepage"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="destination">
<caption>Destination</caption>
<helpitem id="common.UnpackArchiveDestination"/>
</column>
<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
<caption>Downloaded To</caption>
<helpitem id="common.UnpackArchiveDownload"/>
<value type="string"/>
</column>
<row rowId="0">
<boolvalue>
<true/>
</boolvalue>
<value>DBINDEP\SAPEXE.SAR</value>
<value>Unicode</value>
<value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
<value/>
</row>
</table></input></inputgroup></review><button sid="btPREV" default="false" enabled="false" ><caption>< &Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" default="true"><caption>&Next</caption><action>ACTION_NEXT</action><tooltiphelp><![CDATA[Continue processing]]></tooltiphelp></button><button sid="btEDIT"><caption>&Revise</caption><action>ACTION_EDIT</action><tooltiphelp><![CDATA[Edit input values]]></tooltiphelp></button><button sid="btDETAIL" default="true"><caption>Show &Detail</caption><action>ACTION_CBD_DETAIL</action><tooltiphelp><![CDATA[Show all input values]]></tooltiphelp></button></dialog></sapinstgui>
TRACE      2015-03-18 11:30:32.161 [iaxxgenimp.cpp:1031]
          CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE      2015-03-18 11:30:33.330 [sixxbsummary.cpp:83]
          CSiSummaryContainer::setDocument(const iXMLDocument & doc)
<?xml version="1.0" encoding="utf-8"?>
<sapinstguiresp>
<action>ACTION_NEXT</action>
<dialog sid="diReviewDialog">
<review id="review_controll"/>
</dialog>
</sapinstguiresp>
TRACE      2015-03-18 11:30:33.331 [iaxxdlghnd.cpp:96]
          CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE      2015-03-18 11:30:33.331 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:33.356 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE      2015-03-18 11:30:33.375 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:33.375 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:33.429 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE      2015-03-18 11:30:33.500 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:33.773
Status of Step |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0|ntpatch2 is not OK. So we have to restart at this point.
TRACE      2015-03-18 11:30:33.773
Switch to STANDARD mode
TRACE      2015-03-18 11:30:33.773 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:33.801 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE      2015-03-18 11:30:33.866 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:33.868 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:33.926 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE      2015-03-18 11:30:34.67 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO      2015-03-18 11:30:34.67 [csistepexecute.cpp:1024]
Execute step ntpatch2 of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0
TRACE      2015-03-18 11:30:34.084
Call block: NW_Update_DLLs_ind_ind_ind_ind
    function: NW_Update_DLLs_ind_ind_ind_ind_SubComponentContainer_ntpatch2_Preprocess
is validator: false
TRACE      2015-03-18 11:30:34.115 [csistepexecute.cpp:1079]
Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0|ntpatch2 returns TRUE
TRACE      2015-03-18 11:30:34.127
Call block: NW_Update_DLLs_ind_ind_ind_ind
    function: NW_Update_DLLs_ind_ind_ind_ind_SubComponentContainer_ntpatch2
is validator: false
TRACE      2015-03-18 11:30:34.127
NW_Update_DLLs.installDLLs(false)
TRACE      2015-03-18 11:30:34.127
NW_Update_DLLs.installDLLs() already run
TRACE      2015-03-18 11:30:34.153
The step ntpatch2 with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0 has been executed successfully.
INFO      2015-03-18 11:30:34.154 [synxccuren.cpp:887]
          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
          lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
TRACE      2015-03-18 11:30:34.187 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:34.200 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE      2015-03-18 11:30:34.255 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:34.256 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:34.283 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE      2015-03-18 11:30:34.425 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO      2015-03-18 11:30:34.426 [csistepexecute.cpp:1024]
Execute s

Hello Arjun,
Have you executed any other installation prior this attempt?
It seems there are unfinished installations on this server. If this is the case, run the SWPM to uninstall the unfinished installation. Then, execute the installation once again.
Also, make sure all IPs are corrects in the DND and host files. There were cases in which the IPs were not properly configured, or maybe a typo.
Regards,
Henrique Girardi
SAP Active Global Support
#2081285 - How to enter good search terms to an SAP search?
https://service.sap.com/sap/support/notes/2081285
SWPM Troubleshooting documents:
http://scn.sap.com/docs/DOC-62646

OIM 11g High Availability Deployment

Hi Experts,
I'm deploying OIM 11g in High Available schema, following Oracle docs: http://download.oracle.com/docs/cd/E14571_01/core.1111/e10106/imha.htm#CDEFECJF, I have succesfully installed and configured OIM & SOA in weblogic domain on 'OIMHOST1', trying to propagate the configuration from 'OIMHOST1' to 'OIMHOST2' I have packed (using pack.sh) the domain on 'OIMHOST1' and unpacked (using unpack.sh) it to 'OIMHOST2' so I have updated the NodeManager executing setNMProps.sh and finally Ihave started the NodeManager. In order to Test everything is fine and following the documentation I'm traying to perform the following steps, but I'm not succeed
I'M MUST TO SAY THAT I'M RUNNING ON SINGLE STANDARD EDITION DB INSTANCE AND NOT RAC AS MENTIONED IN ORACLE DOCS, PLEASE CLARIFY IF RAC IS REQUIRED, FOR NOW I'M IN DEVELOPMENT ENVIRONMENT, SO I THINK RAC IS NOT REQUIRED FOR NOW, PLEASE CLARIFY
8.9.3.8.3 Start the WLS_SOA2 and WLS_OIM2 Managed Servers on OIMHOST2
Follow these steps to start the WLS_SOA2 and WLS_OIM2 managed servers on OIMHOST2:
Stop the WebLogic Administration Server on OIMHOST2. Use the WebLogic Administration Console to stop the Administration Server.
Start the WebLogic Administration Server on OIMHOST2 using the startWebLogic.sh script under the $DOMAIN_HOME/bin directory. For example:
/u01/app/oracle/admin/OIM/bin/startWebLogic.sh > /tmp/admin.out 2>1&
Validate that the WebLogic Administration Server started up successfully by bringing up the WebLogic Administration Console.
Here its not possible start AdminServer on OIMHOST2, first of all, it looks like boot.properties file under WLS_OIM_DOMAIN_HOME/servers/AdminSever/security is not valid, the first time I try to execute startWeblogic.sh script, it ask for username/password, I have updated boot.properties (vi boot.properties) and manually set clear username and password, this time startWeblogic.sh script passed this stage, but fails:
<Error> <util.install.help.BuildMasterHelpSet> <BEA-000000> <IOException ioe java.io.IOException: No such file or directory>
<Error> <oracle.adf.share.config.ADFMDSConfig> <BEA-000000> <MDSConfigurationException encountered in parseADFConfigurationMDS-01330: unable to load MDS configuration document
MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "writeable" is invalid.
MDS-00503: The metadata path "/u01/app/oracle/product/Middleware/user_projects/domains/IDMDomain/sysman/mds" does not contain any valid directories.
I have verified that this directory "mds" does not exists, as reported by the IOException, in OIMHOST2, but it exists in OIMHOST1. from here its not possible for me following Oracle's documentation, I test this starting Adminserver in OIMHOST1, and starting WLS_SOA2 and WLS_OIM2 managed servers from OIMHOST1 AdminServer console, I have tested 2 ways:
1.- All managed servers in OIHOST1 are shutdown, for this, managed servers in OIMHOST2 works as expected
2.- All managed servers in OIMHOST1 are RUNNING, for this, first I have started SOA2 managed server, after that, I have fired OIM2 managed server, when it finish boot process the following message appears in server's output:
<Warning> <org.quartz.impl.jdbcjobstore.JobStoreCMT> <BEA-000000> <This scheduler instance (servername.domainname1304128390936) is still active but was recovered by another instance in the cluster. This may cause inconsistent behavior.>
Start the WLS_SOA2 managed server using the WebLogic Administration Console.
Start the WLS_OIM2 managed server using the WebLogic Administration Console. The WLS_OIM2 managed server must be started after the WLS_SOA2 managed server is started.
8.9.3.9 Validate the Oracle Identity Manager Instance on OIMHOST2
Validate the Oracle Identity Manager Server instance on OIMHOST2 by bringing up the Oracle Identity Manager Console using a web browser.
The URL for the Oracle Identity Manager Console is:
http://oimvhn2.mycompany.com:14000/oim
Log in using the xelsysadm password.
Your help is highly apprecciated
Regards
Juan

Hi Vaasu,
I have succeeded deploying OIM in HA, just now my customer and I are working on the installation of webtier. Now I have a better understand about HA concepts and the way weblogic works -really nice, but little tricky-
All the magic about HA is configuring properly the network interfaces in each Linux boxes (our case) so, first of all you need to create 2 new floating IP's on each Linux boxes (google: how to create virtual Ip in linux, if you don't know) clone and modify your 'eth0' network script to create the virtual IPs
Follow the procudere in the HA guide: http://download.oracle.com/docs/cd/E14571_01/core.1111/e10106/imha.htm#CDEFECJF
create DB schemas with RCU
install weblogic
install SOA
patch SOA
install IAM
---if you are working on a virtual machine is good idea to take a snapshot here---
Create and configure the weblogic domain (special attentention whe configuring the cluster), see step 13 of 8.9.3.2 Creating and Configuring the WebLogic Domain for OIM and SOA on OIMHOST1, here you need to cofigure:
For the oim_server1 entry, change the entry to the following values:
Name: WLS_OIM1
Listen Address: the IP that is confured in eth0:1 of Linux box1
Listen Port: 14000
For the soa_server1 entry, change the entry to the following values:
Name: WLS_SOA1
Listen Address: the IP configure on eth0:2 of Linux box1
Listen Port: 8001
For the second OIM Server, click Add and supply the following information:
Name: WLS_OIM2
Listen Address: the IP configured on eth0:1 of Linux box2
Listen Port: 14000
For the second SOA Server, click Add and supply the following information:
Name: WLS_SOA2
Listen Address: the IP configured on eth0:2 of Linux box2
Listen Port: 8001
Click Next.
On Step 16 ensure you are using the UNIX tab to configure the machines, also ensure that for machine1 you use the IP configured on the eth0 interface of Linux box1, the same for machine2
please confirm you have performered 8.9.3.3.2 Update Node Manager on OIMHOST1
if everything is ok you must be able to start the AdminServer as described in the guide.
configure OIM: 8.9.3.4.2 Running the Oracle Identity Management Configuration Wizard, in my case I don't need LDAPsync, I have skipped this section, if you configure properly OIM, then you mus perform 8.9.3.5 Post-Configuration Steps for the Managed Servers
resrtar AdminServer then from the weblogic console, start OIM and SOA if node manager is properly configured SOA and OIM must run properly, update deployment mode and coherence as described in the guide and verify that OIM run perfectly in Linux box1.
Propagate OIM from Linux box1 to Linux box2 as described in the guide, using pack and unpack (you MUST use the same filesystem directory structure on both Linux boxes)
Update and start NodeManager as described in the guide
VERY IMPORTAN OBSERVATION
the guide say:
8.9.3.8.3 Start the WLS_SOA2 and WLS_OIM2 Managed Servers on OIMHOST2
Follow these steps to start the WLS_SOA2 and WLS_OIM2 managed servers on OIMHOST2:
Stop the WebLogic Administration Server on OIMHOST2. Use the WebLogic Administration Console to stop the Administration Server.
JUAN OBSERVATION:
IS NOT POSSIBLE TO START OR STOP ADMINSERVER ON HOST2 SINCE ADMIN SERVER WERE CONFIGURED TO LISTEN ON THE IP ADDRES OF eth0 INTERFACE ON HOST1, SO, ITS NOT POSSIBLE TO PLAY IT ON HOST2, I THINK AND ADDITIONAL PROCEDURE SHOULD BE FOLLOWED TO CONFIGURE ADMINSERVER IN HA IN A ACTIVE-PASSIVE MODE
Start the WebLogic Administration Server on OIMHOST2 using the startWebLogic.sh script under the $DOMAIN_HOME/bin directory. For example:
/u01/app/oracle/admin/OIM/bin/startWebLogic.sh > /tmp/admin.out 2>1& -----NOT APPLICABLE
Validate that the WebLogic Administration Server started up successfully by bringing up the WebLogic Administration Console. -----NOT APPLICABLE
Start the WLS_SOA2 managed server using the WebLogic Administration Console. ----START SOA2 FROM THE CONSOLE RUNNING ON HOST1, IT DOESN'T MATTER
Start the WLS_OIM2 managed server using the WebLogic Administration Console. The WLS_OIM2 managed server must be started after the WLS_SOA2 managed server is started. ------ START OIM2 FROM THE CONSOLE RUNNING ON HOST1
HERE YOU MUST BE ABLE TO LOGIN TO OIM2 SERVER AS DESCRIBED IN THE GUIDE, YOU DON'T NEED TO EXECUTE config.sh SCRIPT THIS SHOULD WORK AS DESCRIBED.
Server migration should work straight-forward if you have configured the floating IPs as described, I have not configured the persistence yet since my customer does not have the skills to share a storage.
I hope this helps, and feel free to comment or complement.
By the way, did you know how to set up a valid SSL certificate in Windows 2003 server??? I need it to test and Exchange 2007 I'm tryin to integrate
Regards
Juan

How to enable high availability on SQL Server 2005 with Windows Server 2008 Enterprise R2

Dear Folks,
I would like to ask you about this thing. I'm working for IT department for bank in Myanmar. Our bank have up to 96 branches across all of Myanmar including H.O. We are using Microsoft SQL Server 2005 with Windows Server 2008 for our banking
information system. My main problem is having to backup and restore the database backup files every time the servers in branches goes down for whatever reasons. I want to deploy this feature of high availability and failover cluster using Windows Server 2008
and SQL Server 2005. Our branches have 2 Servers. One is for Primary and other is for Backup. What I want to do is that, I want to change Backup Server to Primary Server whenever the Primary Server goes down for whatever reasons. All the working data and databases
from Primary will immediately replicated into Backup Server along with all the IP information of Primary Server. Please give me step by step guide for this process.

Try below
http://blogs.msdn.com/b/cindygross/archive/2009/10/23/checklist-for-installing-sql-server-2005-as-a-clustered-instance.aspx
I will recommend you to upgrade SQL server to newer version for support as well as flexibility.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

High availability error on presence

Good Day,
I have problem with HA on cisco presence cluster , the error is showing that Node status for the high avaliability is (Running in Backup Mode) and Node Reason (Peer Down During Initialization).
I have restart Sip proxy service as request from document but it's the same Any Help ASAP please
please see the attached
Regards
Ayman

Hello
It seems that the checkbox "Enable High Availability" just above your screenshot is not checked.
See status message and solutions with this link.
http://www.cisco.com/en/US/docs/voice_ip_comm/cups/8_6/english/install_upgrade/deployment/guide/dgcupc.html
You can try
- Utils system restart of CUPS Publisher
- Wait 10 minutes
- Utils system restart of CUPS Subscriber
Then when both servers are up
- Uncheck HA and Save
- Check HA and Save
- Click on Rebalance users if load sharing is needed
JC

Cluster install, high availability

Hi All,
Does anyone have a guide or can detail the steps (differences from a single server install) to install BPC 7.0 Microsoft version in a Cluster Environment(High Availability).
Cheers

Hello Jitendra,
SQL should have its own cluster group. So should DTC and the shared storage.
The name of the cluster that Sorin is refering to is the virtual name associated with the clustered resource, so in this case the DNS name of the SQL cluster group. The idea is that BPC does not care that it is running on a cluster, all it wants is a SQL server. The clustering aspect is transparent to BPC and is left to MS Clustering. Same thing if you have a specific group for SSAS, you give that group's DNS name when installing BPC.
The WEB/App servers components should not be installed on the cluster, but rather on NLB nodes.
Reporting services can be installed either on the cluster or on the web/app server, but keep in mind that most companies don't like having a web server on database servers, so we usually install SSRS on the web/app servers. The SSRS database repository would be located on the SQL cluster in either case.
In the case of NLB being used for the web/app servers, the file share should be located on a shared resource, it cannot be local on the web/app servers. It can be located on the cluster, or any dependable network share that uses the same AD security as the servers.
Note that for NLB we usually recommend using a hardware solution as it is faster than using the software solution that is part of Windows, and does not take resources away from the web/app server.
I hope this helps
Best regards,
Bruno Ranchy

Let me know how to run high availability services in system 9 essbase.

Hi
Let me know how to run high availability services in system 9 essbase.
thanks in ADV
Message was edited by:
user624564
Message was edited by:
user624564

Hi,
Now i am using essbase system 9.2 version,
& URL : http://localhost:11080/eds/EssbaseEnterprise
plz guide me to download the High Availability servers .
thanks in Adv....

HIGH AVAILABILITY for ORACLE E-Business Suite

hai..
i am new to oracle apps administraion.i would like to know one thing.i now how to mantain high availability in the database using rac, dataguard and other concepts.but i would like to know how to mantaing high availability in oracle e-busines suite. is there any clustering concetps in apps? bcas at the database level using rac we can configure number of instances. here is it possible to mantian two or more web or forms..servers simultaneously using clustering concepts? any related papers or there? please guide me.
thanks..
srinivas pvs

Maximum Availability Architecture (MMA) and Solutions for Oracle Apps 11i can be found in the following links:
Note: 403347.1 - Maximum Availability Architecture and Oracle E-Business Suite Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=403347.1
Note: 207159.1 - Oracle E-Business Suite Release 11i Technology Stack Documentation Roadmap
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=207159.1

WLC HA, difference between GLOBAL- and AP- High Availability

hello everyone,
I have a question regarding HA and LAP...
we have two 5508 (sw ver 6.0.199.4), on each specific AP we have an entry for which is his primary and secondary controller
so far so good, when one controller fails, the AP is connecting to the second controller and goes on doing his business...
so what I am not sure about is what I should configure globally regarding HA
first question: do I have to configure anything at all?
second question: what should I configure best? we are using our WLCs only to control APs that are connected to our (WLAN-dedicated) LAN, we are not controlling any APs at a remote-location.
finally, let me quote the configuration-guide:
"Follow these steps to configure primary, secondary, and tertiary controllers for a specific access point and to configure primary and secondary backup controllers for all access points."
and the question for this:
what is the difference between a controller and a backup-controller?
from my point of view: if I configure a primary and a secondary controller, the secondary controller is the backup-controller for the primary controller...
while I am writing this, I would like to apologize for what I am asking here, because at this time I am totally confused about this and to write those questions down, did not help to calm down...
thank you very much in advance!
regards,
Manuel

hi Leo,
I tested this out, but i guess its not working as i thought it would work. I configured the backup primary controller IP and name in the global configuration of the Wireless tab of the WLC and left the AP high availability blank with no settings. I joined the AP to the WLC and show capwap client ha output on the AP shows the backup primary controller name. but if i shut down the primary controller, the AP does not join the back, it just tries to get WLC ip by renewing DHCP forever and stuck in that...   below are the outputs.. any idea why its like this ? I thot if there is no HA configured at the AP level, the global config on the controller level should take effect ?
LWAP3-1042#sh cap cli ha
fastHeartbeatTmr(sec)   7 (enabled)
primaryDiscoverTmr(sec) 30
primaryBackupWlcIp      0xA0A700A
primaryBackupWlcName    WLC2-4402-50
secondaryBackupWlcIp    0x0
secondaryBackupWlcName
DHCP renew try count    0
Fwd traffic stats get   0
Fast Heartbeat sent     0
Discovery attempt      0
Backup WLC array:
LWAP3-1042#
*Apr 30 20:36:21.324: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
Not in Bound state.
*Apr 30 20:36:31.829: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 10.10.114.49, mask 255.255.255.0, hostname LWAP3-1042
*Apr 30 20:37:17.832: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
Not in Bound state.
*Apr 30 20:37:28.337: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 10.10.114.50, mask 255.255.255.0, hostname LWAP3-1042
*Apr 30 20:38:14.338: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
Not in Bound state.
*Apr 30 20:38:24.842: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 10.10.114.51, mask 255.255.255.0, hostname LWAP3-1042
regards
Joe

Running SAP XI in High Availability

Bonjour a vous tous !
I am looking for best practices when running SAP Exchange Infrastructure (3.0, well it is now XI 7.0 with the new NW2004s SP9) in High Availability mode.
The customer that I work with does not know yet on which platform its production environment will be (Unix/Oracle vs Microsoft/SqlServer 20005). I know that some hardware vendor has built-in HA capabilities, either Software/Hardware based (MSFT MCS, IBM HACMP, etc).
Should we go for an "SAP XI all-In One" installation or distributed one ? Should we get one central SLD or one per environment? What is the role of the SLD and Solution Manager? Do they need to be interconnected?
I have worked with other EAI middlewares (Biztralk Server and webMethods) and normally the Integration Engine sit on it's own server and the various adapters are on their respective servers (i.e.: one server for HTTP, one server for FTP, one server for EJB, etc), since the sizing (RAM. Java heap memory, etc) for all theses adapters are different (FTP a lot of small file, EJB not so many request, but they could eat-up a lot of CPU, etc). Is this a best practice that I can apply also with SAP XI ?
Thank in advance for you help !
A+

Hi Michel,
Well we seem to work along the same track...
I am working on 2 customers concurrently - the one using like you using PI 7.0. In their case we implemented a Windows solution using W2K3 Enterprise Edition 64-bit. Avoid 32-bit as it will no longer be supported by SAP next year. We are using MSCS (which is part of the Enterprise Edition by default).
The 2nd is a solaris customer (very large) for which we are using a cross-data center solution handled by Veritas Cluster Manager with automatic failover between systems and data centers if required.
Some answers to your questions:
1. All-in-one - yes
2. SLD - one for DEV/QA, and separate for Prod - this is recomended by SAP too - I can mail you a guide if needed
3. With Solution Manager 4.0, it now supports the J2EE side and hence can understand SLDs. The concept is to setup an HA Solution Manager and deploy the SLD for Prod on the same piece of kit.
4. SAP do not recomend splitting off the Adapter Engine except for specific cases, the main reason being if you have specific systems behind firewalls that you need to communicate with.
Under no circumstances should you have separate AE's per adapter - this would be an extermely expensive solution hardware and support-wise.
Regards
Brian

Wism2 in High Availability - FUS Upgrade

Hello all,
what is the procedure to be followed when upgrading the FUS on a WISM-2 in HA cluster?
Is it the same procedure that applies when upgrading the wism's code in HA?
Thank you
Edited:
The procedure is exactly the same as upgrading. First upgrade the image and then FUS.make sure that you are connected using console connection and definitely perform this within a maintenance window of at least 1 hour.

Hi,
Thanks for sharing this info.
Snipped from this guide also explains how its done:
https://supportforums.cisco.com/discussion/12190806/wism2-high-availability-fus-upgrade
The FUS image can be upgraded while the controllers have HA enabled. The secondary controller will
get upgraded just like it does when upgrading the regular code. However, when you initiate the reboot
on the primary controller both controllers will be unreachable until the FUS upgrade completes on both
the active and the standby in the HA pair. This process will take around 30 to 40 minutes to complete
just like in a non-HA FUS upgrade.

Difference btw: Distributed, High-Availability and Additional SAP System Instances

Hello,
In the installation Doc for NW 741, there is 3 other installations scenarios beside the single instance, can you pl. highlight the difference?
Cheers,
F

Hello Fouad,
Distributed landscape:
In distributed landscape, every instance can run on a separate host
- Central services instance for ABAP ( ASCS)
- Enqueue replication server instance (ERS instance ) for ASCS instance
- Database instance
- Primary application server instance (PAS)
High availability :
In high availability ,all above instances can run on seperate host. Here you can run all instance in switchover cluster infrastructure. That means ,for any instance if one node in cluster fails ,it switch over to other other node and still operations can run without any distrubance.
Additional SAP instance:
Additional SAP aaplication instance can be installed to scale the performance of an SAP system. It can be installed on one of the above instance host or on differnt host.
The term "additional application server instance "was introduced to replace term dialog instance from SAP Netweaver 7.1 and higher.
For more and detailed information ,you can refer to Installation guide for the SAP release you are planning to install and for DB/OS combination.
Hope this helps.
Regards,
Archana

CUCM 10.5 High Availability Guide

Similar Messages

Maybe you are looking for