CUCM 10.5 - Order of trunks in Route Group ignored...Not sure why

Question #1   
I've had a voice mail pilot number working for a long time now.  It's MS Unified Messaging (MS UM for short).  Since we have more than one MS UM server, I thought I'd go ahead and create a SIP trunk for each of the MS UM servers and then put them in the existing Route Group (RG).  I thought I'd go ahead and reorder the trunk groups listed in the RG just to be sure my configure for the new trunk groups was correct.  I have the SIP Options Ping enabled in my SIP profile and I do see all the MS UM SIP trunks with a status of 'Full Service'.  Anyway, if I place one of the newly added SIP trunks for MS UM at the top of the existing RG, my calls are still ending up at the original MS UM server.  It's like CUCM is ignoring the fact that I placed the new SIP trunk at the top and it keeps routing to the old/existing SIP trunks/MS UM server I had in this RG.   I tried resetting the SIP trunks and also reset the Route List (which I didn't think I'd need to do, but I did it anyway) and the result is the same.  It won't select the new SIP trunks no matter what I try.  
I didn't try removing the original SIP trunk from that RG yet and I don't want to do it during the business day, but I could try that after hours and see what happens then.  
Any ideas about why it won't use the new SIP trunks even though they're in service and at the top of the RG list (higher priority), above the original SIP trunk?  My RG is set for top down, not circular.  
Question #2:
Here's a somewhat related question.  (screenshot attached for this one)  I first thought I could simply go to the original SIP trunk and add the other IP addresses for the ofther MS UM servers so I wouldn't need to create more SIP trunk groups for this.  Maybe I'm understanding it wrong, so please enlighten me what these fields are really used for.  On the SIP trunk page, there's a SIP Information section and that's where you add the IP address of the device CUCM is talking to (Destination).  For example, the MS UM server.  Was I wrong to assume that if the SIP trunks would be identical in their config you can simply add the other IP addresses for the alternate MS UM servers here in this section of the SIP trunks page?   What exactly would the extra IP address fields be used for (when you click + to added another address)?   
As soon as I added a second IP address, my calls to MS UM stopped working.  After I removed the second IP (which is for an alternate MS UM server), everything started working again.  Just curious how that IP address field should really be used.  For now, I simply created new SIP trunk groups for the other MS UM servers.
Thanks :-)

Hello,
For me both questions are related, and I expect a communication issue between CUCM and the new MS UM server.
I would like to start with the 2nd question as it answers both, the below is mentioned in the admin guide of CUCM 8.5 but no much explanation was added to the admin guide of 10.0:
"•When an outbound call gets placed, a destination address gets chosen randomly. No preference is given to one destination address over another. All SIP messages that are sent out for a given outbound call go to the same destination address.
•The SIP trunk accepts inbound messages from any of the configured destination addresses."
The above answers your inquiry, redundancy cannot be achieved by configuring multiple destinations. And calls are dropped when you add the new ip address within the same trunk, because it was chosen but the CUCM was not able to communicate with it, and also this explains why the new MS UM server trunk was not selected in the RG, as CUCM also was not able to communicate with it and moved to the next member in the RG (i.e. the old MS UM).
- Can you try to ping the new MS UM server from CUCM server, SSH to CUCM server and issue the following command: utils network ping IP_ADDRESS_OF_NEW_MS_UM
- It can be that the new MS UM server is configured to accept only SIP UDP messages, can you try changing it from the SIP security Profile?
If the above two suggestions did not help to isolate the issue, then we need detailed CCM logs covering test outgoing call together with the IP addresses of both MS UM servers.
Thank you,
Shadi

Similar Messages

  • Adding ICT trunk and SIP trunk into Route group

    Hi ,
    We need to map ICT and SIP trunk into the same route group  ,but the problem here is already same ICT is mapped to another route pattern.
    If i try to create new ICT with same remote IP ,it's throwing Add failed because the remote IP is already defined.
    Is there anyway we can add ICT with same remote IP and map the ICT and SIP trunk ? or Is there anyway that we can add exisitng ICT into route pattern.
    Route pattern is used for this route group is different.CUCM version - 7.X.Please advice.
    Regards,
    Ramanathan

    Thanks Suresh ...
    In that case ,I can assign the route group(ICT ,SIP - Top Down)  to two different Route pattern.
    Both patterns will hit ICT first ,Please correct me if I am wrong.
    Ram

  • Hello I thought that I had ordered a photo book in aperture but not sure that it has gone through as I have not had a confirmation email,

    Hello I thought that I had ordered a photo book in aperture this morning but not sure that the order has gone through as I have not had a confirmation email,

    t I am currently in canada and trying to get the book sent to Australia. Im not sure if apple is picking up my location and that is having any affect on it?
    The AppleID you are using to buy the book, must be tied to the location of the store where you are ordering the book from. Is your AppleID associated with an australian address? And are you placing the order at the Australian store? The Canadian store will not shiptoAustralia, see these policies: http://www.apple.com/internetservices/terms/sales_policies.html
    Also set the "Region" in the language & Text preferences to "Australia", while you are ordering.
    Regards
    Léonie

  • I ordered a cable card, and I'm not sure if I'll need a tuner adapter as well?

    I ordered a cable card (from Verizon) to use with "Hauppauge WinTV DCR-2650 Dual Tuner Cable Card Tuner" and a PC running Windows 7 Media Center (it passed the test.)
    My question is, do I need to order a tuner adapter (not sure what this is) to make my setup work?
    I'm thinking that a tuner adapter is used when you don't have a cable card, is this correct? So that you could get SD stations like you would from a cable company with out a box.

    Welcome to the Apple Support Communities
    Most of the times, when you spill liquid on a computer, something gets damaged. It may the keyboard, it may the trackpad or it may the logic board. In your case, I hope that only the keyboard got damaged, because the logic board is the most expensive part of the MacBook, as near everything is soldered onto the logic board.
    I recommend you to make a backup of your data and take the computer to an Apple Store or reseller to get it diagnosed and repaired. It's probable that your computer will stop working soon because of the water, if it got onto your logic board

  • The music I sync into my iPod touch is all literally out of order and in the library it's not. Why is this?

    I checked the starting time for songs in the library and on my iPod and they all say 0:00. What I mean when I say it's out of order is for example, the first ten seconds are skipped and placed somewhere in the middle of the song and some other parts are skipped then played later. I didn't have this problem before I updated iTunes for my new iPod, now when I tried syncing onto my old iPod as well, the same thing happens. So there's nothing wrong with my iPod. I want to know how I can fix this on iTunes or if it's just a glitch on my iTunes?

    Something you can try is resetting it all Settings > General > Reset > Reset all settings. Or go to Settings > Store & sign out & log back in. Another thing you can do is restore your ipod. This has happened to me but the only thing i did was that i created a new account but try doing the things above i just told you. :)

  • System raising planned order for PIR using strategy group 50

    Hello Everyone,
    Here I am planning to use strategy group 50 for the finished product. I have given PIR Qtys for the same and when MRP is run system is automatically raising planned orders of order type LA. Which means the same can be converted to production order and I am able to convert the same.
    But as I understand with strategy group 50, you can convert planned orders to production orders only if sales orders exist and
    Dependent requirements for lower levels are thrown and can be manufactured but not header material.
    So I am not sure why this is happening. Or is strategy group 50 not supported for AFS.
    Please do provide inputs.
    Sincerely,
    Aji Kurian Mani

    Hello Aji Kurian Mani ,
    Currently, AFS is designed to support only strategy group 40.
    Thanks and best regards,
    Deepthi

  • Local Route Groups vs translation to E.164

    Hello.
    Can anybody describe local route groups benefits compared to dialplan with translations to E.164?
    Let's see simple scenario. I have 3 sites - MSK, SPB and NSK. All site has phones and a gateway, each site has it's partition for termination (TERM-MSK, TERM-SPB, TERM-NSK) and a partition for translation (XLAT-MSK, XLAT-SPB, XLAT-NSK). There are 2 CSS for translation and termination for each site (CSS-X-MSK, CSS-X-SPB, CSS-X-NSK, CSS-TERM-MSK, CSS-TERM-SPB and CSS-TERM-NSK). All phones has a translation CSS local to it's site configured, for example phones at MSK has CSS-X-MSK in phone configuration. There are translation patterns for translating dialed off-net numbers to E.164 format (7495XXXXXXX for MSK, 7812XXXXXXX for SPB and 7383XXXXXXX for NSK). Subscribers uses 9 for local off-net calls and 90 for long-distance, there are 2 translation patterns with corresponding XLAT partition and CSS-TERM CSS (9.[1-9]XXXXXX -> 7495 prefix plus XXXXXXX and 90.[1-9]XXXXXXXXX -> 7 plus XXXXXXXXXX, partition XLAT-MSK, CSS CSS-TERM-MSK for MSK). CSS-X CSSes has corresponding XLAT partition only. CSS-TERM CSSes has allowed TERM patitions. Each route pattern has corresponding TERM partition and points to single route list with single route group. Finally I have 3 route patterns 3 route lists, 3 route groups, 6 partitions and 6 CSSes total).
    Using Local Route Groups I have the same 3 route patterns, 3 route lists and 3 route groups but one partition and one CSS. Pros for this scheme is less partitions and CSSes. Cons is the loss of flexibility (I can't allow calls to anywhere from MSK and only MSK and NSK for NSK and can't use different prefixes for off-net calls for each office).
    Have I understood the Features and Services Guide rignt? Is there other way to translate dialed off-net number to E.164 without using extra partitions and CSSes (Translatio Pattern requires this)?

    Maxim,
    Local Route Groups have not dependency on e.164 dial plan and vice-versa, there are independent features.  Local Route groups allow you  to consolidate your route patterns/route lists/CSS/PT, depending on complexity of your routing you can accomplish all your remote site routing via a common set of route patterns/list CSS/partitions, so routing decisions are based on local route groups assigned to device pool of the calling device rather than just the CSS.  E.164 dial plan is merely a way to structure dialed numbers, how and where you transform them is up to you, I prefer using transformation patterns vs. translation patterns for example.
    HTH,
    Chris

  • Planned Order Scheduling - No Valid Routing Selected

    Hi Friends,
    I am trying to create planned order and then trigger lead time scheduling for it.
    I have maintained BOM, Routing, Production Version, and Scheduling Parameters for Planned Order as Detailed Scheduling with Scheduling Horizon as 50 days, and gactivated scheduling anf enerate capacity requirements in OPU5.
    My Production Version is valid through 12/31/9999 and also validity in terms of order qty is correct.
    I face problem of routing not being selected beyond the 70 days horizon.
    I could not understand why the scheduling horizon considered is 70 days tough i have maintained 50 as scheduling horizon in OPU5.
    Waiting for your valuable help and pointers
    Regards,
    Mayur

    Dear Maulik and Dhaval,
    Good morning, Hope you remember me.
    In my material master I have 28 days as inhouse production time but even aftre changing it to 0 there is not change in the leadtime scheduling result. I still get the message that no valid routing found.
    Dhaval,
    For the selection ID routing status matches. My problem is, If my Planned Order has a basic start date on or before 30-Apr-2009 when I try to schedule order it successfully fetches routing but when i give basic start date as 1-May-2009 it results in message no valid routing found.
    I though it might be because i have maintained detailed scheduling horizon as 50 days but 30-Apr-2009 is 70 days from now, so I am confused where to check for. My material even do not use production shceduling profile.
    Thanks for replying.
    Looking to see some clue
    Mayur...

  • [svn:fx-trunk] 5237: The order of setting styleName and emphasized should not matter.

    Revision: 5237
    Author: [email protected]
    Date: 2009-03-11 10:13:28 -0700 (Wed, 11 Mar 2009)
    Log Message:
    The order of setting styleName and emphasized should not matter.
    Bugs: SDK-19704
    QE Notes: None
    Doc Notes: None
    Reviewers: Glenn, Evtim
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-19704
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxButton.as

  • CUCM 10.5 Local Route Group

    When utilizing the local route group for a device pool, when a change is made for that device pool, does a reset of the devices have to occur for the changes to go into affect?  The reason I ask is if you are simply making the change to the Route List there is no interruption to the end users, but what if a location's Long Distance is pointing to a Route List that references a Local Route Group.  If you want move that to another route group under the device pool is there any impact on the phones in that device pool?
    Thanks,
    Joe

    So What you ask is if you modified the route list (change the actual local route Group for other route group) will reset the phones ? as far as I now no change on rl will reset phone but change on dp will..

  • Isdn bchan-number-order ascending round-robin is applied but not working

    isdn bchan-number-order ascending round-robin is applied but not working
    ios c3825-spservicesk9-mz.124-21.bin
    relevant config
    controller E1 0/3/0
     framing NO-CRC4
     pri-group timeslots 1-31
    interface Serial0/3/0:15
     no ip address
     encapsulation hdlc
     no logging event link-status
     no snmp trap link-status
     isdn switch-type primary-net5
     isdn overlap-receiving
     isdn incoming-voice voice
     isdn bchan-number-order ascending round-robin
     trunk-group 1
     no cdp enable
    my problem is this:-
    At the moment calls are leaving on the first available channel of my h323 voice gateway PRI, I can apply this command to the interface fine but it makes no difference the b cannels are always being picked on a first come  first served basis . I have also tried combination "isdn bchan-number-order decending" and "isdn bchan-number-order descending round-robin" but it makes no difference , the first b channel is always selected .
    Any ideas , if you think its a bug can u identify the bug id as I cannot find it .

    Hello
     I can see that you use ascending , that why you hit 1st channel.You have to choose one of these commands ascending or descending
    I have a question here , for your incoming calls which channel hits ?.FYI isdn bchan-number-order descending is enable by default , so if you need to change you have to type ascending. Can you just share incoming calls which channel hits?.This is because before you define your outgoing calls , you have to check your service provider channel used, and this to avoid error channel is not available.
    Command
    Router(config-if)# isdn bchan-number-order {ascending | descending}
    Purpose
    Enables B channel selection for outgoing calls on a PRI interface (optional).
    Thanks
    please rate all useful information

  • TEHO with Local Routing Group

    Hi,
    I was watching an online training video of setting TEHO using Local Routing Group on CUCM 8.6. However somehow I think he configured it wrong.
    In his example,
    He used a centralized call processing infrastructure for NY (hosts the CUCM) and CA offices. NY and CA router groups are created to contain local gateways respecitively and also assigned to corresponding device pool. When configuring Route List for the remote patterns (Pattern to reach CA numbers from NY, vice versa), he only created one RL for both patterns and only added the Standard Local Route Group to the RL… Then wrap up the configure.
    To me, in order to make TEHO work, there should be one RL for each location (one for NY and one for CA) and the NY route group needs to be added into the CA RL and CA Route group needs to be added into NY RL and both RL has SLRG as secondary option.
    Am I crazy or the video did it wrong...

    Good catch, with what is described here, when someone in CA calls a number in CA, the CA route list would be matched and the route list would be selected which contains Standard Local Route Group (SLRG) and the device pool for CA would be checked and the CA route group would be selected.  That works as expected.  Now if a CA phone calls a NY number, the route pattern would be matched, the route list the route pattern points to would be SLRG, so the device pool of the originating device would be checked.  The CA device pool being that a CA phone placed the call would be checked for the local route group and that would be set for a CA route group, so the call would go out of a CA gateway.
    What usually is done is that the route list for TEHO for the CA phone would contain, the NY route group and then SLRG in that order.  That way the call would be extended to NY first out their local gateway for TEHO and then extended to the CA local gateway if the NY gateway fails.  For NY to CA TEHO, the CA route group would be added to another route list, this time with the CA gateway first in the list followed by SLRG.

  • MGCP/Standard Local Route Group List question

    Hello all,
    Here is the scenario:
    Site A - CUCM Pub/Sub / MGCP gateway
    Site B - CUCM Sub / MGCP gateway
    Site C - CUCM Sub / MGCP gateway
    The sites are using the standard local route group with TEHO per location. Site A (HQ) has s discount carrier for LD, and therefore it would be cost effective to backhaul the LD from Site B and Site C to the Site A PRIs.
    Can this be accomplished while using Standard Local Route Groups or is it necessary to go back to site specific routing?
    Thanks,
    JN                

    In CUCM 9 and older you can only have a single local route group per device pool (this changed on version 10), so you will either have to define the Local or LD RG as your Local Route group and then use standard route patterns/route lists/route group configuration for the other calls, so at site B you would have (assuming local route group is local trunks):
    Local Pattern --> Standard Local RL
    911 pattern --> Standard Local RL
    LD pattern --> SiteB LD RL
    Intl pattern --> SiteB LD RL
    etc
    HTH,
    Chris

  • ASA 5510 with Cisco 2811 Router Behind it - Not forwarding traffic

    Hi all,
    Some might know that I have been dealing with an issue where I cannot seem to get forwarded packets to reach their destinations behind an ASA 5510 that has a Cisco 2811 connected directly behind it.
    Some examples that work.
    I can SSH into the ASA.
    I can SSH to the Cisco Routers behind the ASA.
    I cannot reach items beind the Cisco Routers.
    My Configuration is this (I am sure I included a bunch of info I didn't need to, but I am hoping it'll help!):
    I have a static Ip assigned to my Ouside Interface Ethernet 0/1
    It has an IP address of 199.195.xxx.xxx
    I am trying to learn how to shape network traffic (this is all new to me) via the ASA and the Routers to specific devices.
    The Inside Interface on the ASA is 10.10.1.1 255.255.255.252
    The Outside Interface on the 2811 is 10.10.1.2 255.255.255.252
    I can ping the router from the ASA. I can SSH through the ASA to the router.
    BUT I CANNOT ACCESS DEVICES BEHIND THE ROUTER.
    So, I wanted to BAM that statement above because I just don't kjnow where the issue is. Is the issue on the router or the ASA, my guess is, the router, but I just don't know.
    Here are my configs, helpfully someone can help.
    ASA errors on the ASDM when I try and hit resources; specifically a web device behind the ASA and the 2811. It's Ip address 192.168.1.5 it's listening on port 80.Static IP, not assigned via DHCP.
    6
    Feb 14 2014
    19:38:56
    98.22.121.x
    41164
    192.168.1.5
    80
    Built inbound TCP connection 1922859 for Outside:98.22.121.x/41164 (98.22.121.x/41164) to Inside:192.168.1.5/80 (199.195.168.x/8080)
    6
    Feb 14 2014
    19:38:56
    10.10.1.2
    80
    98.22.121.x
    41164
    Deny TCP (no connection) from 10.10.1.2/80 to 98.22.121.x/41164 flags SYN ACK  on interface Inside
    ASA5510# sh nat
    Auto NAT Policies (Section 2)
    1 (DMZ) to (Outside) source static ROUTER-2821 interface   service tcp ssh 2222
        translate_hits = 1, untranslate_hits = 18
    2 (Inside) to (Outside) source static ROUTER-2811 interface   service tcp ssh 222
        translate_hits = 0, untranslate_hits = 13
    3 (VOIP) to (Outside) source static ROUTER-3745 interface   service tcp ssh 2223
        translate_hits = 0, untranslate_hits = 3
    4 (Inside) to (Outside) source static RDP-DC1 interface   service tcp 3389 3389
        translate_hits = 0, untranslate_hits = 236
    5 (Inside) to (Outside) source static WEBCAM-01 interface   service tcp www 8080
        translate_hits = 0, untranslate_hits = 162
    Manual NAT Policies (Section 3)
    1 (any) to (Outside) source dynamic PAT-SOURCE interface
        translate_hits = 1056862, untranslate_hits = 83506
    ASA5510# show access-list
    access-list cached ACL log flows: total 0, denied 0 (deny-flow-max 4096)
                alert-interval 300
    access-list USERS; 1 elements; name hash: 0x50681c1e
    access-list USERS line 1 standard permit 10.10.1.0 255.255.255.0 (hitcnt=0) 0xdd6ba495
    access-list Outside_access_in; 5 elements; name hash: 0xe796c137
    access-list Outside_access_in line 1 extended permit tcp host 98.22.121.x object ROUTER-2811 eq ssh (hitcnt=37) 0x5a53778d
      access-list Outside_access_in line 1 extended permit tcp host 98.22.121.x host 10.10.1.2 eq ssh (hitcnt=37) 0x5a53778d
    access-list Outside_access_in line 2 extended permit tcp host 98.22.121.x object ROUTER-2821 eq ssh (hitcnt=8) 0x9f32bc21
      access-list Outside_access_in line 2 extended permit tcp host 98.22.121.x host 10.10.0.2 eq ssh (hitcnt=8) 0x9f32bc21
    access-list Outside_access_in line 3 extended permit tcp host 98.22.121.x interface Outside eq https (hitcnt=0) 0x385488b2
    access-list Outside_access_in line 4 extended permit tcp host 98.22.121.x object WEBCAM-01 eq www (hitcnt=60) 0xe66674ec
      access-list Outside_access_in line 4 extended permit tcp host 98.22.121.x host 192.168.1.5 eq www (hitcnt=60) 0xe66674ec
    access-list Outside_access_in line 5 extended permit tcp host 98.22.121.x object RDP-DC1 eq 3389 (hitcnt=3) 0x02f13f4e
      access-list Outside_access_in line 5 extended permit tcp host 98.22.121.x host 192.168.1.2 eq 3389 (hitcnt=3) 0x02f13f4e
    access-list dmz-access-vlan1; 1 elements; name hash: 0xc3450860
    access-list dmz-access-vlan1 line 1 extended permit ip 128.162.1.0 255.255.255.0 any (hitcnt=0) 0x429fedf1
    access-list dmz-access; 3 elements; name hash: 0xf53f5801
    access-list dmz-access line 1 remark Permit all traffic to DC1
    access-list dmz-access line 2 extended permit ip 128.162.1.0 255.255.255.0 host 192.168.1.2 (hitcnt=0) 0xd2dced0a
    access-list dmz-access line 3 remark Permit only DNS traffic to DNS server
    access-list dmz-access line 4 extended permit udp 128.162.1.0 255.255.255.0 host 192.168.1.2 eq domain (hitcnt=0) 0xbb21093e
    access-list dmz-access line 5 remark Permit ICMP to all devices in DC
    access-list dmz-access line 6 extended permit icmp 128.162.1.0 255.255.255.0 192.168.1.0 255.255.255.0 (hitcnt=0) 0x71269ef7
    CISCO-2811#show access-lists
    Standard IP access list 1
        10 permit any (1581021 matches)
    CISCO-2811#show translate
    CISCO-2811#show route
    CISCO-2811#show route-map
    CISCO-2811#show host
    CISCO-2811#show hosts
    Default domain is maladomini.int
    Name/address lookup uses domain service
    Name servers are 192.168.1.2, 199.195.168.4, 205.171.2.65, 205.171.3.65, 8.8.8.8
    Codes: UN - unknown, EX - expired, OK - OK, ?? - revalidate
           temp - temporary, perm - permanent
           NA - Not Applicable None - Not defined
    Host                      Port  Flags      Age Type   Address(es)
    api.mixpanel.com          None  (temp, OK)  2   IP    198.23.64.21
                                                          198.23.64.22
                                                          198.23.64.18
                                                          198.23.64.19
                                                          198.23.64.20
    ASA5510:
    ASA5510# sh run all
    : Saved
    ASA Version 9.1(4)
    command-alias exec h help
    command-alias exec lo logout
    command-alias exec p ping
    command-alias exec s show
    terminal width 80
    hostname ASA5510
    domain-name maladomini.int
    enable password x encrypted
    no fips enable
    xlate per-session deny tcp any4 any4
    xlate per-session deny tcp any4 any6
    xlate per-session deny tcp any6 any4
    xlate per-session deny tcp any6 any6
    xlate per-session deny udp any4 any4 eq domain
    xlate per-session deny udp any4 any6 eq domain
    xlate per-session deny udp any6 any4 eq domain
    xlate per-session deny udp any6 any6 eq domain
    xlate per-session permit tcp any4 any4
    xlate per-session permit tcp any4 any6
    xlate per-session permit tcp any6 any4
    xlate per-session permit tcp any6 any6
    xlate per-session permit udp any4 any4 eq domain
    xlate per-session permit udp any4 any6 eq domain
    xlate per-session permit udp any6 any4 eq domain
    xlate per-session permit udp any6 any6 eq domain
    passwd x encrypted
    names
    dns-guard
    lacp system-priority 32768
    interface Ethernet0/0
    description LAN Interface
    speed auto
    duplex auto
    no  flowcontrol send on
    nameif Inside
    security-level 100
    ip address 10.10.1.1 255.255.255.252
    delay 10
    interface Ethernet0/1
    description WAN Interface
    speed auto
    duplex auto
    no  flowcontrol send on
    nameif Outside
    security-level 0
    ip address 199.195.168.xxx 255.255.255.240
    delay 10
    interface Ethernet0/2
    description DMZ
    speed auto
    duplex auto
    no  flowcontrol send on
    nameif DMZ
    security-level 100
    ip address 10.10.0.1 255.255.255.252
    delay 10
    interface Ethernet0/3
    description VOIP
    speed auto
    duplex auto
    no  flowcontrol send on
    nameif VOIP
    security-level 100
    ip address 10.10.2.1 255.255.255.252
    delay 10
    interface Management0/0
    speed auto
    duplex auto
    management-only
    shutdown
    nameif management
    security-level 0
    no ip address
    delay 10
    regex _default_gator "Gator"
    regex _default_firethru-tunnel_2 "[/\\]cgi[-]bin[/\\]proxy"
    regex _default_shoutcast-tunneling-protocol "1"
    regex _default_http-tunnel "[/\\]HT_PortLog.aspx"
    regex _default_x-kazaa-network "[\r\n\t ]+[xX]-[kK][aA][zZ][aA][aA]-[nN][eE][tT][wW][oO][rR][kK]"
    regex _default_msn-messenger "[Aa][Pp][Pp][Ll][Ii][Cc][Aa][Tt][Ii][Oo][Nn][/\\][Xx][-][Mm][Ss][Nn][-][Mm][Ee][Ss][Ss][Ee][Nn][Gg][Ee][Rr]"
    regex _default_GoToMyPC-tunnel_2 "[/\\]erc[/\\]Poll"
    regex _default_gnu-http-tunnel_uri "[/\\]index[.]html"
    regex _default_aim-messenger "[Hh][Tt][Tt][Pp][.][Pp][Rr][Oo][Xx][Yy][.][Ii][Cc][Qq][.][Cc][Oo][Mm]"
    regex _default_gnu-http-tunnel_arg "crap"
    regex _default_icy-metadata "[\r\n\t ]+[iI][cC][yY]-[mM][eE][tT][aA][dD][aA][tT][aA]"
    regex _default_GoToMyPC-tunnel "machinekey"
    regex _default_windows-media-player-tunnel "NSPlayer"
    regex _default_yahoo-messenger "YMSG"
    regex _default_httport-tunnel "photo[.]exectech[-]va[.]com"
    regex _default_firethru-tunnel_1 "firethru[.]com"
    checkheaps check-interval 60
    checkheaps validate-checksum 60
    boot system disk0:/asa914-k8.bin
    ftp mode passive
    clock timezone UTC 0
    dns domain-lookup Outside
    dns server-group DefaultDNS
    name-server 199.195.168.4
    name-server 205.171.2.65
    name-server 205.171.3.65
    domain-name maladomini.int
    same-security-traffic permit inter-interface
    object service ah pre-defined
    service ah
    description This is a pre-defined object
    object service eigrp pre-defined
    service eigrp
    description This is a pre-defined object
    object service esp pre-defined
    service esp
    description This is a pre-defined object
    object service gre pre-defined
    service gre
    description This is a pre-defined object
    object service icmp pre-defined
    service icmp
    description This is a pre-defined object
    object service icmp6 pre-defined
    service icmp6
    description This is a pre-defined object
    object service igmp pre-defined
    service igmp
    description This is a pre-defined object
    object service igrp pre-defined
    service igrp
    description This is a pre-defined object
    object service ip pre-defined
    service ip
    description This is a pre-defined object
    object service ipinip pre-defined
    service ipinip
    description This is a pre-defined object
    object service ipsec pre-defined
    service esp
    description This is a pre-defined object
    object service nos pre-defined
    service nos
    description This is a pre-defined object
    object service ospf pre-defined
    service ospf
    description This is a pre-defined object
    object service pcp pre-defined
    service pcp
    description This is a pre-defined object
    object service pim pre-defined
    service pim
    description This is a pre-defined object
    object service pptp pre-defined
    service gre
    description This is a pre-defined object
    object service snp pre-defined
    service snp
    description This is a pre-defined object
    object service tcp pre-defined
    service tcp
    description This is a pre-defined object
    object service udp pre-defined
    service udp
    description This is a pre-defined object
    object service tcp-aol pre-defined
    service tcp destination eq aol
    description This is a pre-defined object
    object service tcp-bgp pre-defined
    service tcp destination eq bgp
    description This is a pre-defined object
    object service tcp-chargen pre-defined
    service tcp destination eq chargen
    description This is a pre-defined object
    object service tcp-cifs pre-defined
    service tcp destination eq cifs
    description This is a pre-defined object
    object service tcp-citrix-ica pre-defined
    service tcp destination eq citrix-ica
    description This is a pre-defined object
    object service tcp-ctiqbe pre-defined
    service tcp destination eq ctiqbe
    description This is a pre-defined object
    object service tcp-daytime pre-defined
    service tcp destination eq daytime
    description This is a pre-defined object
    object service tcp-discard pre-defined
    service tcp destination eq discard
    description This is a pre-defined object
    object service tcp-domain pre-defined
    service tcp destination eq domain
    description This is a pre-defined object
    object service tcp-echo pre-defined
    service tcp destination eq echo
    description This is a pre-defined object
    object service tcp-exec pre-defined
    service tcp destination eq exec
    description This is a pre-defined object
    object service tcp-finger pre-defined
    service tcp destination eq finger
    description This is a pre-defined object
    object service tcp-ftp pre-defined
    service tcp destination eq ftp
    description This is a pre-defined object
    object service tcp-ftp-data pre-defined
    service tcp destination eq ftp-data
    description This is a pre-defined object
    object service tcp-gopher pre-defined
    service tcp destination eq gopher
    description This is a pre-defined object
    object service tcp-ident pre-defined
    service tcp destination eq ident
    description This is a pre-defined object
    object service tcp-imap4 pre-defined
    service tcp destination eq imap4
    description This is a pre-defined object
    object service tcp-irc pre-defined
    service tcp destination eq irc
    description This is a pre-defined object
    object service tcp-hostname pre-defined
    service tcp destination eq hostname
    description This is a pre-defined object
    object service tcp-kerberos pre-defined
    service tcp destination eq kerberos
    description This is a pre-defined object
    object service tcp-klogin pre-defined
    service tcp destination eq klogin
    description This is a pre-defined object
    object service tcp-kshell pre-defined
    service tcp destination eq kshell
    description This is a pre-defined object
    object service tcp-ldap pre-defined
    service tcp destination eq ldap
    description This is a pre-defined object
    object service tcp-ldaps pre-defined
    service tcp destination eq ldaps
    description This is a pre-defined object
    object service tcp-login pre-defined
    service tcp destination eq login
    description This is a pre-defined object
    object service tcp-lotusnotes pre-defined
    service tcp destination eq lotusnotes
    description This is a pre-defined object
    object service tcp-nfs pre-defined
    service tcp destination eq nfs
    description This is a pre-defined object
    object service tcp-netbios-ssn pre-defined
    service tcp destination eq netbios-ssn
    description This is a pre-defined object
    object service tcp-whois pre-defined
    service tcp destination eq whois
    description This is a pre-defined object
    object service tcp-nntp pre-defined
    service tcp destination eq nntp
    description This is a pre-defined object
    object service tcp-pcanywhere-data pre-defined
    service tcp destination eq pcanywhere-data
    description This is a pre-defined object
    object service tcp-pim-auto-rp pre-defined
    service tcp destination eq pim-auto-rp
    description This is a pre-defined object
    object service tcp-pop2 pre-defined
    service tcp destination eq pop2
    description This is a pre-defined object
    object service tcp-pop3 pre-defined
    service tcp destination eq pop3
    description This is a pre-defined object
    object service tcp-pptp pre-defined
    service tcp destination eq pptp
    description This is a pre-defined object
    object service tcp-lpd pre-defined
    service tcp destination eq lpd
    description This is a pre-defined object
    object service tcp-rsh pre-defined
    service tcp destination eq rsh
    description This is a pre-defined object
    object service tcp-rtsp pre-defined
    service tcp destination eq rtsp
    description This is a pre-defined object
    object service tcp-sip pre-defined
    service tcp destination eq sip
    description This is a pre-defined object
    object service tcp-smtp pre-defined
    service tcp destination eq smtp
    description This is a pre-defined object
    object service tcp-ssh pre-defined
    service tcp destination eq ssh
    description This is a pre-defined object
    object service tcp-sunrpc pre-defined
    service tcp destination eq sunrpc
    description This is a pre-defined object
    object service tcp-tacacs pre-defined
    service tcp destination eq tacacs
    description This is a pre-defined object
    object service tcp-talk pre-defined
    service tcp destination eq talk
    description This is a pre-defined object
    object service tcp-telnet pre-defined
    service tcp destination eq telnet
    description This is a pre-defined object
    object service tcp-uucp pre-defined
    service tcp destination eq uucp
    description This is a pre-defined object
    object service tcp-www pre-defined
    service tcp destination eq www
    description This is a pre-defined object
    object service tcp-http pre-defined
    service tcp destination eq www
    description This is a pre-defined object
    object service tcp-https pre-defined
    service tcp destination eq https
    description This is a pre-defined object
    object service tcp-cmd pre-defined
    service tcp destination eq rsh
    description This is a pre-defined object
    object service tcp-sqlnet pre-defined
    service tcp destination eq sqlnet
    description This is a pre-defined object
    object service tcp-h323 pre-defined
    service tcp destination eq h323
    description This is a pre-defined object
    object service tcp-udp-cifs pre-defined
    service tcp-udp destination eq cifs
    description This is a pre-defined object
    object service tcp-udp-discard pre-defined
    service tcp-udp destination eq discard
    description This is a pre-defined object
    object service tcp-udp-domain pre-defined
    service tcp-udp destination eq domain
    description This is a pre-defined object
    object service tcp-udp-echo pre-defined
    service tcp-udp destination eq echo
    description This is a pre-defined object
    object service tcp-udp-kerberos pre-defined
    service tcp-udp destination eq kerberos
    description This is a pre-defined object
    object service tcp-udp-nfs pre-defined
    service tcp-udp destination eq nfs
    description This is a pre-defined object
    object service tcp-udp-pim-auto-rp pre-defined
    service tcp-udp destination eq pim-auto-rp
    description This is a pre-defined object
    object service tcp-udp-sip pre-defined
    service tcp-udp destination eq sip
    description This is a pre-defined object
    object service tcp-udp-sunrpc pre-defined
    service tcp-udp destination eq sunrpc
    description This is a pre-defined object
    object service tcp-udp-tacacs pre-defined
    service tcp-udp destination eq tacacs
    description This is a pre-defined object
    object service tcp-udp-www pre-defined
    service tcp-udp destination eq www
    description This is a pre-defined object
    object service tcp-udp-http pre-defined
    service tcp-udp destination eq www
    description This is a pre-defined object
    object service tcp-udp-talk pre-defined
    service tcp-udp destination eq talk
    description This is a pre-defined object
    object service udp-biff pre-defined
    service udp destination eq biff
    description This is a pre-defined object
    object service udp-bootpc pre-defined
    service udp destination eq bootpc
    description This is a pre-defined object
    object service udp-bootps pre-defined
    service udp destination eq bootps
    description This is a pre-defined object
    object service udp-cifs pre-defined
    service udp destination eq cifs
    description This is a pre-defined object
    object service udp-discard pre-defined
    service udp destination eq discard
    description This is a pre-defined object
    object service udp-domain pre-defined
    service udp destination eq domain
    description This is a pre-defined object
    object service udp-dnsix pre-defined
    service udp destination eq dnsix
    description This is a pre-defined object
    object service udp-echo pre-defined
    service udp destination eq echo
    description This is a pre-defined object
    object service udp-www pre-defined
    service udp destination eq www
    description This is a pre-defined object
    object service udp-http pre-defined
    service udp destination eq www
    description This is a pre-defined object
    object service udp-nameserver pre-defined
    service udp destination eq nameserver
    description This is a pre-defined object
    object service udp-kerberos pre-defined
    service udp destination eq kerberos
    description This is a pre-defined object
    object service udp-mobile-ip pre-defined
    service udp destination eq mobile-ip
    description This is a pre-defined object
    object service udp-nfs pre-defined
    service udp destination eq nfs
    description This is a pre-defined object
    object service udp-netbios-ns pre-defined
    service udp destination eq netbios-ns
    description This is a pre-defined object
    object service udp-netbios-dgm pre-defined
    service udp destination eq netbios-dgm
    description This is a pre-defined object
    object service udp-ntp pre-defined
    service udp destination eq ntp
    description This is a pre-defined object
    object service udp-pcanywhere-status pre-defined
    service udp destination eq pcanywhere-status
    description This is a pre-defined object
    object service udp-pim-auto-rp pre-defined
    service udp destination eq pim-auto-rp
    description This is a pre-defined object
    object service udp-radius pre-defined
    service udp destination eq radius
    description This is a pre-defined object
    object service udp-radius-acct pre-defined
    service udp destination eq radius-acct
    description This is a pre-defined object
    object service udp-rip pre-defined
    service udp destination eq rip
    description This is a pre-defined object
    object service udp-secureid-udp pre-defined
    service udp destination eq secureid-udp
    description This is a pre-defined object
    object service udp-sip pre-defined
    service udp destination eq sip
    description This is a pre-defined object
    object service udp-snmp pre-defined
    service udp destination eq snmp
    description This is a pre-defined object
    object service udp-snmptrap pre-defined
    service udp destination eq snmptrap
    description This is a pre-defined object
    object service udp-sunrpc pre-defined
    service udp destination eq sunrpc
    description This is a pre-defined object
    object service udp-syslog pre-defined
    service udp destination eq syslog
    description This is a pre-defined object
    object service udp-tacacs pre-defined
    service udp destination eq tacacs
    description This is a pre-defined object
    object service udp-talk pre-defined
    service udp destination eq talk
    description This is a pre-defined object
    object service udp-tftp pre-defined
    service udp destination eq tftp
    description This is a pre-defined object
    object service udp-time pre-defined
    service udp destination eq time
    description This is a pre-defined object
    object service udp-who pre-defined
    service udp destination eq who
    description This is a pre-defined object
    object service udp-xdmcp pre-defined
    service udp destination eq xdmcp
    description This is a pre-defined object
    object service udp-isakmp pre-defined
    service udp destination eq isakmp
    description This is a pre-defined object
    object service icmp6-unreachable pre-defined
    service icmp6 unreachable
    description This is a pre-defined object
    object service icmp6-packet-too-big pre-defined
    service icmp6 packet-too-big
    description This is a pre-defined object
    object service icmp6-time-exceeded pre-defined
    service icmp6 time-exceeded
    description This is a pre-defined object
    object service icmp6-parameter-problem pre-defined
    service icmp6 parameter-problem
    description This is a pre-defined object
    object service icmp6-echo pre-defined
    service icmp6 echo
    description This is a pre-defined object
    object service icmp6-echo-reply pre-defined
    service icmp6 echo-reply
    description This is a pre-defined object
    object service icmp6-membership-query pre-defined
    service icmp6 membership-query
    description This is a pre-defined object
    object service icmp6-membership-report pre-defined
    service icmp6 membership-report
    description This is a pre-defined object
    object service icmp6-membership-reduction pre-defined
    service icmp6 membership-reduction
    description This is a pre-defined object
    object service icmp6-router-renumbering pre-defined
    service icmp6 router-renumbering
    description This is a pre-defined object
    object service icmp6-router-solicitation pre-defined
    service icmp6 router-solicitation
    description This is a pre-defined object
    object service icmp6-router-advertisement pre-defined
    service icmp6 router-advertisement
    description This is a pre-defined object
    object service icmp6-neighbor-solicitation pre-defined
    service icmp6 neighbor-solicitation
    description This is a pre-defined object
    object service icmp6-neighbor-advertisement pre-defined
    service icmp6 neighbor-advertisement
    description This is a pre-defined object
    object service icmp6-neighbor-redirect pre-defined
    service icmp6 neighbor-redirect
    description This is a pre-defined object
    object service icmp-echo pre-defined
    service icmp echo
    description This is a pre-defined object
    object service icmp-echo-reply pre-defined
    service icmp echo-reply
    description This is a pre-defined object
    object service icmp-unreachable pre-defined
    service icmp unreachable
    description This is a pre-defined object
    object service icmp-source-quench pre-defined
    service icmp source-quench
    description This is a pre-defined object
    object service icmp-redirect pre-defined
    service icmp redirect
    description This is a pre-defined object
    object service icmp-alternate-address pre-defined
    service icmp alternate-address
    description This is a pre-defined object
    object service icmp-router-advertisement pre-defined
    service icmp router-advertisement
    description This is a pre-defined object
    object service icmp-router-solicitation pre-defined
    service icmp router-solicitation
    description This is a pre-defined object
    object service icmp-time-exceeded pre-defined
    service icmp time-exceeded
    description This is a pre-defined object
    object service icmp-parameter-problem pre-defined
    service icmp parameter-problem
    description This is a pre-defined object
    object service icmp-timestamp-request pre-defined
    service icmp timestamp-request
    description This is a pre-defined object
    object service icmp-timestamp-reply pre-defined
    service icmp timestamp-reply
    description This is a pre-defined object
    object service icmp-information-request pre-defined
    service icmp information-request
    description This is a pre-defined object
    object service icmp-information-reply pre-defined
    service icmp information-reply
    description This is a pre-defined object
    object service icmp-mask-request pre-defined
    service icmp mask-request
    description This is a pre-defined object
    object service icmp-mask-reply pre-defined
    service icmp mask-reply
    description This is a pre-defined object
    object service icmp-traceroute pre-defined
    service icmp traceroute
    description This is a pre-defined object
    object service icmp-conversion-error pre-defined
    service icmp conversion-error
    description This is a pre-defined object
    object service icmp-mobile-redirect pre-defined
    service icmp mobile-redirect
    description This is a pre-defined object
    object network ROUTER-2811
    host 10.10.1.2
    object network ROUTER-2821
    host 10.10.0.2
    object network WEBCAM-01
    host 192.168.1.5
    object network DNS-SERVER
    host 192.168.1.2
    object network ROUTER-3745
    host 10.10.2.2
    object network RDP-DC1
    host 192.168.1.2
    object-group network PAT-SOURCE
    network-object 10.10.1.0 255.255.255.252
    network-object 10.10.0.0 255.255.255.252
    network-object 10.10.2.0 255.255.255.252
    network-object 192.168.0.0 255.255.255.0
    network-object 172.16.10.0 255.255.255.0
    network-object 172.16.20.0 255.255.255.0
    network-object 128.162.1.0 255.255.255.0
    network-object 128.162.10.0 255.255.255.0
    network-object 128.162.20.0 255.255.255.0
    object-group network DM_INLINE_NETWORK_2
    network-object host 98.22.121.x
    object-group network Outside_access_in
    object-group protocol DM_INLINE_PROTOCOL_1
    protocol-object gre
    access-list USERS standard permit 10.10.1.0 255.255.255.0
    access-list Outside_access_in extended permit tcp host 98.22.121.x object ROUTER-2811 eq ssh
    access-list Outside_access_in extended permit tcp host 98.22.121.x object ROUTER-2821 eq ssh
    access-list Outside_access_in extended permit tcp host 98.22.121.x interface Outside eq https
    access-list Outside_access_in extended permit tcp host 98.22.121.x object WEBCAM-01 eq www
    access-list Outside_access_in extended permit tcp host 98.22.121.x object RDP-DC1 eq 3389
    access-list dmz-access-vlan1 extended permit ip 128.162.1.0 255.255.255.0 any
    access-list dmz-access remark Permit all traffic to DC1
    access-list dmz-access extended permit ip 128.162.1.0 255.255.255.0 host 192.168.1.2
    access-list dmz-access remark Permit only DNS traffic to DNS server
    access-list dmz-access extended permit udp 128.162.1.0 255.255.255.0 host 192.168.1.2 eq domain
    access-list dmz-access remark Permit ICMP to all devices in DC
    access-list dmz-access extended permit icmp 128.162.1.0 255.255.255.0 192.168.1.0 255.255.255.0
    pager lines 24
    logging enable
    logging buffer-size 4096
    logging asdm-buffer-size 100
    logging asdm informational
    logging flash-minimum-free 3076
    logging flash-maximum-allocation 1024
    logging rate-limit 1 10 message 747001
    logging rate-limit 1 1 message 402116
    logging rate-limit 1 10 message 620002
    logging rate-limit 1 10 message 717015
    logging rate-limit 1 10 message 717018
    logging rate-limit 1 10 message 201013
    logging rate-limit 1 10 message 201012
    logging rate-limit 1 1 message 313009
    logging rate-limit 100 1 message 750003
    logging rate-limit 100 1 message 750002
    logging rate-limit 100 1 message 750004
    logging rate-limit 1 10 message 419003
    logging rate-limit 1 10 message 405002
    logging rate-limit 1 10 message 405003
    logging rate-limit 1 10 message 421007
    logging rate-limit 1 10 message 405001
    logging rate-limit 1 10 message 421001
    logging rate-limit 1 10 message 421002
    logging rate-limit 1 10 message 337004
    logging rate-limit 1 10 message 337005
    logging rate-limit 1 10 message 337001
    logging rate-limit 1 10 message 337002
    logging rate-limit 1 60 message 199020
    logging rate-limit 1 10 message 337003
    logging rate-limit 2 5 message 199011
    logging rate-limit 1 10 message 199010
    logging rate-limit 1 10 message 337009
    logging rate-limit 2 5 message 199012
    logging rate-limit 1 10 message 710002
    logging rate-limit 1 10 message 209003
    logging rate-limit 1 10 message 209004
    logging rate-limit 1 10 message 209005
    logging rate-limit 1 10 message 431002
    logging rate-limit 1 10 message 431001
    logging rate-limit 1 1 message 447001
    logging rate-limit 1 10 message 110003
    logging rate-limit 1 10 message 110002
    logging rate-limit 1 10 message 429007
    logging rate-limit 1 10 message 216004
    logging rate-limit 1 10 message 450001
    flow-export template timeout-rate 30
    flow-export active refresh-interval 1
    mtu Inside 1500
    mtu Outside 1500
    mtu management 1500
    mtu DMZ 1500
    mtu VOIP 1500
    icmp unreachable rate-limit 1 burst-size 1
    icmp deny any Outside
    asdm image disk0:/asdm-715.bin
    no asdm history enable
    arp timeout 14400
    no arp permit-nonconnected
    object network ROUTER-2811
    nat (Inside,Outside) static interface service tcp ssh 222
    object network ROUTER-2821
    nat (DMZ,Outside) static interface service tcp ssh 2222
    object network WEBCAM-01
    nat (Inside,Outside) static interface service tcp www 8080
    object network ROUTER-3745
    nat (VOIP,Outside) static interface service tcp ssh 2223
    object network RDP-DC1
    nat (Inside,Outside) static interface service tcp 3389 3389
    nat (any,Outside) after-auto source dynamic PAT-SOURCE interface
    access-group Outside_access_in in interface Outside
    ipv6 dhcprelay timeout 60
    router rip
    network 10.0.0.0
    version 2
    no auto-summary
    route Outside 0.0.0.0 0.0.0.0 199.195.168.113 1
    route Inside 128.162.1.0 255.255.255.0 10.10.0.2 1
    route Inside 128.162.10.0 255.255.255.0 10.10.0.2 1
    route Inside 128.162.20.0 255.255.255.0 10.10.0.2 1
    route Inside 172.16.10.0 255.255.255.0 10.10.1.2 1
    route Inside 172.16.20.0 255.255.255.0 10.10.1.2 1
    route Inside 192.168.1.0 255.255.255.0 10.10.1.2 1
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    action continue
    no cts server-group
    no cts sxp enable
    no cts sxp default
    no cts sxp default source-ip
    cts sxp reconciliation period 120
    cts sxp retry period 120
    user-identity enable
    user-identity domain LOCAL
    user-identity default-domain LOCAL
    user-identity action mac-address-mismatch remove-user-ip
    user-identity inactive-user-timer minutes 60
    user-identity poll-import-user-group-timer hours 8
    user-identity ad-agent active-user-database full-download
    user-identity ad-agent hello-timer seconds 30 retry-times 5
    no user-identity user-not-found enable
    aaa authentication ssh console LOCAL
    http server enable 443
    http 0.0.0.0 0.0.0.0 Inside
    http 98.22.121.x 255.255.255.255 Outside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart
    no snmp-server enable traps syslog
    no snmp-server enable traps ipsec start stop
    no snmp-server enable traps entity config-change fru-insert fru-remove fan-failure power-supply power-supply-presence cpu-temperature chassis-temperature power-supply-temperature chassis-fan-failure
    no snmp-server enable traps memory-threshold
    no snmp-server enable traps interface-threshold
    no snmp-server enable traps remote-access session-threshold-exceeded
    no snmp-server enable traps connection-limit-reached
    no snmp-server enable traps cpu threshold rising
    no snmp-server enable traps ikev2 start stop
    no snmp-server enable traps nat packet-discard
    snmp-server enable
    snmp-server listen-port 161
    fragment size 200 Inside
    fragment chain 24 Inside
    fragment timeout 5 Inside
    no fragment reassembly full Inside
    fragment size 200 Outside
    fragment chain 24 Outside
    fragment timeout 5 Outside
    no fragment reassembly full Outside
    fragment size 200 management
    fragment chain 24 management
    fragment timeout 5 management
    no fragment reassembly full management
    fragment size 200 DMZ
    fragment chain 24 DMZ
    fragment timeout 5 DMZ
    no fragment reassembly full DMZ
    fragment size 200 VOIP
    fragment chain 24 VOIP
    fragment timeout 5 VOIP
    no fragment reassembly full VOIP
    no sysopt connection timewait
    sysopt connection tcpmss 1380
    sysopt connection tcpmss minimum 0
    sysopt connection permit-vpn
    sysopt connection reclassify-vpn
    no sysopt connection preserve-vpn-flows
    no sysopt radius ignore-secret
    no sysopt noproxyarp Inside
    no sysopt noproxyarp Outside
    no sysopt noproxyarp management
    no sysopt noproxyarp DMZ
    no sysopt noproxyarp VOIP
    service password-recovery
    no crypto ipsec ikev2 sa-strength-enforcement
    crypto ipsec security-association lifetime seconds 28800
    crypto ipsec security-association lifetime kilobytes 4608000
    crypto ipsec security-association replay window-size 64
    crypto ipsec security-association pmtu-aging infinite
    crypto ipsec fragmentation before-encryption Inside
    crypto ipsec fragmentation before-encryption Outside
    crypto ipsec fragmentation before-encryption management
    crypto ipsec fragmentation before-encryption DMZ
    crypto ipsec fragmentation before-encryption VOIP
    crypto ipsec df-bit copy-df Inside
    crypto ipsec df-bit copy-df Outside
    crypto ipsec df-bit copy-df management
    crypto ipsec df-bit copy-df DMZ
    crypto ipsec df-bit copy-df VOIP
    crypto ca trustpool policy
    revocation-check none
    crl cache-time 60
    crl enforcenextupdate
    crypto isakmp identity auto
    crypto isakmp nat-traversal 20
    crypto ikev2 cookie-challenge 50
    crypto ikev2 limit max-in-negotiation-sa 100
    no crypto ikev2 limit max-sa
    crypto ikev2 redirect during-auth
    crypto ikev1 limit max-in-negotiation-sa 20
    telnet timeout 5
    ssh 0.0.0.0 0.0.0.0 Inside
    ssh 98.22.121.x 255.255.255.255 Outside
    ssh timeout 60
    ssh version 2
    ssh key-exchange group dh-group1-sha1
    console timeout 0
    vpn-addr-assign aaa
    vpn-addr-assign dhcp
    vpn-addr-assign local reuse-delay 0
    ipv6-vpn-addr-assign aaa
    ipv6-vpn-addr-assign local reuse-delay 0
    no vpn-sessiondb max-other-vpn-limit
    no vpn-sessiondb max-anyconnect-premium-or-essentials-limit
    no remote-access threshold
    l2tp tunnel hello 60
    tls-proxy maximum-session 100
    threat-detection rate dos-drop rate-interval 600 average-rate 100 burst-rate 400
    threat-detection rate dos-drop rate-interval 3600 average-rate 80 burst-rate 320
    threat-detection rate bad-packet-drop rate-interval 600 average-rate 100 burst-rate 400
    threat-detection rate bad-packet-drop rate-interval 3600 average-rate 80 burst-rate 320
    threat-detection rate acl-drop rate-interval 600 average-rate 400 burst-rate 800
    threat-detection rate acl-drop rate-interval 3600 average-rate 320 burst-rate 640
    threat-detection rate conn-limit-drop rate-interval 600 average-rate 100 burst-rate 400
    threat-detection rate conn-limit-drop rate-interval 3600 average-rate 80 burst-rate 320
    threat-detection rate icmp-drop rate-interval 600 average-rate 100 burst-rate 400
    threat-detection rate icmp-drop rate-interval 3600 average-rate 80 burst-rate 320
    threat-detection rate scanning-threat rate-interval 600 average-rate 5 burst-rate 10
    threat-detection rate scanning-threat rate-interval 3600 average-rate 4 burst-rate 8
    threat-detection rate syn-attack rate-interval 600 average-rate 100 burst-rate 200
    threat-detection rate syn-attack rate-interval 3600 average-rate 80 burst-rate 160
    threat-detection rate fw-drop rate-interval 600 average-rate 400 burst-rate 1600
    threat-detection rate fw-drop rate-interval 3600 average-rate 320 burst-rate 1280
    threat-detection rate inspect-drop rate-interval 600 average-rate 400 burst-rate 1600
    threat-detection rate inspect-drop rate-interval 3600 average-rate 320 burst-rate 1280
    threat-detection rate interface-drop rate-interval 600 average-rate 2000 burst-rate 8000
    threat-detection rate interface-drop rate-interval 3600 average-rate 1600 burst-rate 6400
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    ntp server 24.56.178.140 source Outside prefer
    ssl server-version any
    ssl client-version any
    ssl encryption rc4-sha1 dhe-aes128-sha1 dhe-aes256-sha1 aes128-sha1 aes256-sha1 3des-sha1
    ssl certificate-authentication fca-timeout 2
    webvpn
    memory-size percent 50
    port 443
    dtls port 443
    character-encoding none
    no http-proxy
    no https-proxy
    default-idle-timeout 1800
    portal-access-rule none
    no csd enable
    no anyconnect enable
    no tunnel-group-list enable
    no tunnel-group-preference group-url
    rewrite order 65535 enable resource-mask *
    no internal-password
    no onscreen-keyboard
    no default-language
    no smart-tunnel notification-icon
    no keepout
    cache
      no disable
      max-object-size 1000
      min-object-size 0
      no cache-static-content enable
      lmfactor 20
      expiry-time 1
    no auto-signon
    no error-recovery disable
    no ssl-server-check
    no mus password
    mus host mus.cisco.com
    no hostscan data-limit
    : # show import webvpn customization
    : Template
    : DfltCustomization
    : # show import webvpn url-list
    : Template
    : # show import webvpn translation-table
    : Translation Tables' Templates:
    :   PortForwarder
    :   banners
    :   customization
    :   url-list
    :   webvpn
    : Translation Tables:
    :   fr                   PortForwarder
    :   fr                   customization
    :   fr                   webvpn
    :   ja                   PortForwarder
    :   ja                   customization
    :   ja                   webvpn
    :   ru                   PortForwarder
    :   ru                   customization
    :   ru                   webvpn
    : # show import webvpn mst-translation
    : No MS translation tables defined
    : # show import webvpn webcontent
    : No custom webcontent is loaded
    : # show import webvpn AnyConnect-customization
    : No OEM resources defined
    : # show import webvpn plug-in
    group-policy DfltGrpPolicy internal
    group-policy DfltGrpPolicy attributes
    banner none
    wins-server none
    dns-server none
    dhcp-network-scope none
    vpn-access-hours none
    vpn-simultaneous-logins 3
    vpn-idle-timeout 30
    vpn-idle-timeout alert-interval 1
    vpn-session-timeout none
    vpn-session-timeout alert-interval 1
    vpn-filter none
    ipv6-vpn-filter none
    vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-clientless
    password-storage disable
    ip-comp disable
    re-xauth disable
    group-lock none
    pfs disable
    ipsec-udp disable
    ipsec-udp-port 10000
    split-tunnel-policy tunnelall
    ipv6-split-tunnel-policy tunnelall
    split-tunnel-network-list none
    default-domain none
    split-dns none
    split-tunnel-all-dns disable
    intercept-dhcp 255.255.255.255 disable
    secure-unit-authentication disable
    user-authentication disable
    user-authentication-idle-timeout 30
    ip-phone-bypass disable
    client-bypass-protocol disable
    gateway-fqdn none
    leap-bypass disable
    nem disable
    backup-servers keep-client-config
    msie-proxy server none
    msie-proxy method no-modify
    msie-proxy except-list none
    msie-proxy local-bypass disable
    msie-proxy pac-url none
    msie-proxy lockdown enable
    vlan none
    nac-settings none
    address-pools none
    ipv6-address-pools none
    smartcard-removal-disconnect enable
    scep-forwarding-url none
    client-firewall none
    client-access-rule none
    webvpn
      url-list none
      filter none
      homepage none
      html-content-filter none
      port-forward name Application Access
      port-forward disable
      http-proxy disable
      sso-server none
      anyconnect ssl dtls enable
      anyconnect mtu 1406
      anyconnect firewall-rule client-interface private none
      anyconnect firewall-rule client-interface public none
      anyconnect keep-installer installed
      anyconnect ssl keepalive 20
      anyconnect ssl rekey time none
      anyconnect ssl rekey method none
      anyconnect dpd-interval client 30
      anyconnect dpd-interval gateway 30
      anyconnect ssl compression none
      anyconnect dtls compression none
      anyconnect modules none
      anyconnect profiles none
      anyconnect ask none
      customization none
      keep-alive-ignore 4
      http-comp gzip
      download-max-size 2147483647
      upload-max-size 2147483647
      post-max-size 2147483647
      user-storage none
      storage-objects value cookies,credentials
      storage-key none
      hidden-shares none
      smart-tunnel disable
      activex-relay enable
      unix-auth-uid 65534
      unix-auth-gid 65534
      file-entry enable
      file-browsing enable
      url-entry enable
      deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information
      smart-tunnel auto-signon disable
      anyconnect ssl df-bit-ignore disable
      anyconnect routing-filtering-ignore disable
      smart-tunnel tunnel-policy tunnelall
      always-on-vpn profile-setting
    password-policy minimum-length 3
    password-policy minimum-changes 0
    password-policy minimum-lowercase 0
    password-policy minimum-uppercase 0
    password-policy minimum-numeric 0
    password-policy minimum-special 0
    password-policy lifetime 0
    no password-policy authenticate-enable
    quota management-session 0
    tunnel-group DefaultL2LGroup type ipsec-l2l
    tunnel-group DefaultL2LGroup general-attributes
    no accounting-server-group
    default-group-policy DfltGrpPolicy
    tunnel-group DefaultL2LGroup ipsec-attributes
    no ikev1 pre-shared-key
    peer-id-validate req
    no chain
    no ikev1 trust-point
    isakmp keepalive threshold 10 retry 2
    no ikev2 remote-authentication
    no ikev2 local-authentication
    tunnel-group DefaultRAGroup type remote-access
    tunnel-group DefaultRAGroup general-attributes
    no address-pool
    no ipv6-address-pool
    authentication-server-group LOCAL
    secondary-authentication-server-group none
    no accounting-server-group
    default-group-policy DfltGrpPolicy
    no dhcp-server
    no strip-realm
    no nat-assigned-to-public-ip
    no scep-enrollment enable
    no password-management
    no override-account-disable
    no strip-group
    no authorization-required
    username-from-certificate CN OU
    secondary-username-from-certificate CN OU
    authentication-attr-from-server primary
    authenticated-session-username primary
    tunnel-group DefaultRAGroup webvpn-attributes
    customization DfltCustomization
    authentication aaa
    no override-svc-download
    no radius-reject-message
    no proxy-auth sdi
    no pre-fill-username ssl-client
    no pre-fill-username clientless
    no secondary-pre-fill-username ssl-client
    no secondary-pre-fill-username clientless
    dns-group DefaultDNS
    no without-csd
    tunnel-group DefaultRAGroup ipsec-attributes
    no ikev1 pre-shared-key
    peer-id-validate req
    no chain
    no ikev1 trust-point
    no ikev1 radius-sdi-xauth
    isakmp keepalive threshold 300 retry 2
    ikev1 user-authentication xauth
    no ikev2 remote-authentication
    no ikev2 local-authentication
    tunnel-group DefaultRAGroup ppp-attributes
    no authentication pap
    authentication chap
    authentication ms-chap-v1
    no authentication ms-chap-v2
    no authentication eap-proxy
    tunnel-group DefaultWEBVPNGroup type remote-access
    tunnel-group DefaultWEBVPNGroup general-attributes
    no address-pool
    no ipv6-address-pool
    authentication-server-group LOCAL
    secondary-authentication-server-group none
    no accounting-server-group
    default-group-policy DfltGrpPolicy
    no dhcp-server
    no strip-realm
    no nat-assigned-to-public-ip
    no scep-enrollment enable
    no password-management
    no override-account-disable
    no strip-group
    no authorization-required
    username-from-certificate CN OU
    secondary-username-from-certificate CN OU
    authentication-attr-from-server primary
    authenticated-session-username primary
    tunnel-group DefaultWEBVPNGroup webvpn-attributes
    customization DfltCustomization
    authentication aaa
    no override-svc-download
    no radius-reject-message
    no proxy-auth sdi
    no pre-fill-username ssl-client
    no pre-fill-username clientless
    no secondary-pre-fill-username ssl-client
    no secondary-pre-fill-username clientless
    dns-group DefaultDNS
    no without-csd
    tunnel-group DefaultWEBVPNGroup ipsec-attributes
    no ikev1 pre-shared-key
    peer-id-validate req
    no chain
    no ikev1 trust-point
    no ikev1 radius-sdi-xauth
    isakmp keepalive threshold 300 retry 2
    ikev1 user-authentication xauth
    no ikev2 remote-authentication
    no ikev2 local-authentication
    tunnel-group DefaultWEBVPNGroup ppp-attributes
    no authentication pap
    authentication chap
    authentication ms-chap-v1
    no authentication ms-chap-v2
    no authentication eap-proxy
    class-map type inspect http match-all _default_gator
    match request header user-agent regex _default_gator
    class-map type inspect http match-all _default_msn-messenger
    match response header content-type regex _default_msn-messenger
    class-map type inspect http match-all _default_yahoo-messenger
    match request body regex _default_yahoo-messenger
    class-map type inspect http match-all _default_windows-media-player-tunnel
    match request header user-agent regex _default_windows-media-player-tunnel
    class-map type inspect http match-all _default_gnu-http-tunnel
    match request args regex _default_gnu-http-tunnel_arg
    match request uri regex _default_gnu-http-tunnel_uri
    class-map type inspect http match-all _default_firethru-tunnel
    match request header host regex _default_firethru-tunnel_1
    match request uri regex _default_firethru-tunnel_2
    class-map type inspect http match-all _default_aim-messenger
    match request header host regex _default_aim-messenger
    class-map type inspect http match-all _default_http-tunnel
    match request uri regex _default_http-tunnel
    class-map type inspect http match-all _default_kazaa
    match response header regex _default_x-kazaa-network count gt 0
    class-map type inspect http match-all _default_shoutcast-tunneling-protocol
    match request header regex _default_icy-metadata regex _default_shoutcast-tunneling-protocol
    class-map class-default
    match any
    class-map inspection_default
    match default-inspection-traffic
    class-map type inspect http match-all _default_GoToMyPC-tunnel
    match request args regex _default_GoToMyPC-tunnel
    match request uri regex _default_GoToMyPC-tunnel_2
    class-map type inspect http match-all _default_httport-tunnel
    match request header host regex _default_httport-tunnel
    policy-map type inspect rtsp _default_rtsp_map
    description Default RTSP policymap
    parameters
    policy-map type inspect ipv6 _default_ipv6_map
    description Default IPV6 policy-map
    parameters
      verify-header type
      verify-header order
    match header routing-type range 0 255
      drop log
    policy-map type inspect h323 _default_h323_map
    description Default H.323 policymap
    parameters
      no rtp-conformance
    policy-map type inspect dns migrated_dns_map_1
    parameters
      message-length maximum client auto
      message-length maximum 512
      no message-length maximum server
      dns-guard
      protocol-enforcement
      nat-rewrite
      no id-randomization
      no id-mismatch
      no tsig enforced
    policy-map type inspect esmtp _default_esmtp_map
    description Default ESMTP policy-map
    parameters
      mask-banner
      no mail-relay
      no special-character
      no allow-tls
    match cmd line length gt 512
      drop-connection log
    match cmd RCPT count gt 100
      drop-connection log
    match body line length gt 998
      log
    match header line length gt 998
      drop-connection log
    match sender-address length gt 320
      drop-connection log
    match MIME filename length gt 255
      drop-connection log
    match ehlo-reply-parameter others
      mask
    policy-map type inspect ip-options _default_ip_options_map
    description Default IP-OPTIONS policy-map
    parameters
      router-alert action allow
    policy-map global_policy
    class inspection_default
      inspect dns migrated_dns_map_1
      inspect ftp
      inspect h323 h225 _default_h323_map
      inspect h323 ras _default_h323_map
      inspect rsh
      inspect rtsp
      inspect esmtp _default_esmtp_map
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect ip-options _default_ip_options_map
      inspect icmp
      inspect icmp error
      inspect pptp
    class class-default
    policy-map type inspect sip _default_sip_map
    description Default SIP policymap
    parameters
      im
      no ip-address-privacy
      traffic-non-sip
      no rtp-conformance
    policy-map type inspect dns _default_dns_map
    description Default DNS policy-map
    parameters
      no message-length maximum client
      no message-le

    I ran those commands while I had the nat off on the router and here are the results. note, i didn't make any changes to the ASA as you only said to remove the router RIP which I did and reloaded and no change.
    As long as the statements ip nat outside on the Fastethernet 0/0 is off and the ip nat inside is off on the vlan and the overload statement is taken out, I cannot hit the internet.
    CISCO-2811#conf t
    Enter configuration commands, one per line.  End with CNTL/Z.
    CISCO-2811(config)#int
    CISCO-2811(config)#interface f
    CISCO-2811(config)#interface fastEthernet 0/1.3
    CISCO-2811(config-subif)#no ip nat inside
    CISCO-2811(config-subif)#exit
    CISCO-2811(config)#inter
    CISCO-2811(config)#interface f
    CISCO-2811(config)#interface fastEthernet 0/0
    CISCO-2811(config-if)#no ip nat outside
    CISCO-2811(config-if)#exit
    CISCO-2811(config)#$nside source list 1 interface FastEthernet0/0 overload
    Dynamic mapping in use, do you want to delete all entries? [no]: y
    CISCO-2811(config)#exit
    CISCO-2811#sh ip arp
    Protocol  Address          Age (min)  Hardware Addr   Type   Interface
    Internet  10.10.1.1             202   c47d.4f3b.8ea6  ARPA   FastEthernet0/0
    Internet  10.10.1.2               -   0019.55a7.2ae8  ARPA   FastEthernet0/0
    Internet  172.16.10.1             -   0019.55a7.2ae9  ARPA   FastEthernet0/1.1
    Internet  172.16.10.3           238   0011.5c73.28c1  ARPA   FastEthernet0/1.1
    Internet  172.16.10.50           72   cc2d.8c78.065a  ARPA   FastEthernet0/1.1
    Internet  172.16.20.1             -   0019.55a7.2ae9  ARPA   FastEthernet0/1.2
    Internet  172.16.20.3           196   0011.5c73.28c2  ARPA   FastEthernet0/1.2
    Internet  192.168.1.1             -   0019.55a7.2ae9  ARPA   FastEthernet0/1.3
    Internet  192.168.1.2             0   0024.e864.01a8  ARPA   FastEthernet0/1.3
    Internet  192.168.1.3           155   0011.5c73.28c0  ARPA   FastEthernet0/1.3
    Internet  192.168.1.5            61   4802.2a4c.1c74  ARPA   FastEthernet0/1.3
    Internet  192.168.1.20            0   5cf9.dd52.5fa9  ARPA   FastEthernet0/1.3
    Internet  192.168.1.50            0   308c.fb47.f2d9  ARPA   FastEthernet0/1.3
    Internet  192.168.1.51            1   ec35.8677.4057  ARPA   FastEthernet0/1.3
    Internet  192.168.1.52            1   b418.d136.ef72  ARPA   FastEthernet0/1.3
    Internet  192.168.1.53            1   8853.9572.e113  ARPA   FastEthernet0/1.3
    Internet  192.168.1.54           12   0009.b044.9f23  ARPA   FastEthernet0/1.3
    Internet  192.168.1.55            0   f47b.5e9a.7ae5  ARPA   FastEthernet0/1.3
    Internet  192.168.1.149           0   001e.4fc5.a199  ARPA   FastEthernet0/1.3
    Internet  192.168.1.174           0   b8ac.6fff.af83  ARPA   FastEthernet0/1.3
    CISCO-2811#sh ip route
    Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
           D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
           N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
           E1 - OSPF external type 1, E2 - OSPF external type 2
           i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
           ia - IS-IS inter area, * - candidate default, U - per-user static route
           o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
           + - replicated route, % - next hop override
    Gateway of last resort is 10.10.1.1 to network 0.0.0.0
    S*    0.0.0.0/0 [1/0] via 10.10.1.1
          10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
    C        10.10.1.0/30 is directly connected, FastEthernet0/0
    L        10.10.1.2/32 is directly connected, FastEthernet0/0
          172.16.0.0/16 is variably subnetted, 4 subnets, 2 masks
    C        172.16.10.0/24 is directly connected, FastEthernet0/1.1
    L        172.16.10.1/32 is directly connected, FastEthernet0/1.1
    C        172.16.20.0/24 is directly connected, FastEthernet0/1.2
    L        172.16.20.1/32 is directly connected, FastEthernet0/1.2
          192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
    C        192.168.1.0/24 is directly connected, FastEthernet0/1.3
    L        192.168.1.1/32 is directly connected, FastEthernet0/1.3
    ASA
    ASA5510# sh arp
            Inside 10.10.1.2 0019.55a7.2ae8 12342
            Outside 199.195.168.113 000c.4243.581a 2
            Outside 199.195.168.116 e05f.b947.116b 2436
            Outside 199.195.168.120 0017.c58a.1123 9192
            DMZ 10.10.0.2 0025.849f.63e0 3192
            VOIP 10.10.2.2 000d.bcdc.fc40 7754
    ASA5510# sh route
    Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
           D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
           N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
           E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
           i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
           * - candidate default, U - per-user static route, o - ODR
           P - periodic downloaded static route
    Gateway of last resort is 199.195.168.113 to network 0.0.0.0
    S    172.16.20.0 255.255.255.0 [1/0] via 10.10.1.2, Inside
    S    172.16.10.0 255.255.255.0 [1/0] via 10.10.1.2, Inside
    S    128.162.1.0 255.255.255.0 [1/0] via 10.10.0.2, DMZ
    S    128.162.10.0 255.255.255.0 [1/0] via 10.10.0.2, DMZ
    S    128.162.20.0 255.255.255.0 [1/0] via 10.10.0.2, DMZ
    C    199.195.168.112 255.255.255.240 is directly connected, Outside
    C    10.10.0.0 255.255.255.252 is directly connected, DMZ
    C    10.10.1.0 255.255.255.252 is directly connected, Inside
    S    192.168.1.0 255.255.255.0 [1/0] via 10.10.1.2, Inside
    S*   0.0.0.0 0.0.0.0 [1/0] via 199.195.168.113, Outside
    ASA5510# show xlate
    35 in use, 784 most used
    Flags: D - DNS, e - extended, I - identity, i - dynamic, r - portmap,
           s - static, T - twice, N - net-to-net
    TCP PAT from DMZ:10.10.0.2 22-22 to Outside:199.195.168.x 2222-2222
        flags sr idle 481:54:14 timeout 0:00:00
    TCP PAT from Inside:10.10.1.2 22-22 to Outside:199.195.168.x 222-222
        flags sr idle 51:06:46 timeout 0:00:00
    TCP PAT from VOIP:10.10.2.2 22-22 to Outside:199.195.168.x 2223-2223
        flags sr idle 687:32:27 timeout 0:00:00
    TCP PAT from Inside:192.168.1.2 3389-3389 to Outside:199.195.168.x 3389-3389
        flags sr idle 457:17:01 timeout 0:00:00
    TCP PAT from Inside:192.168.1.5 80-80 to Outside:199.195.168.x 8080-8080
        flags sr idle 52:18:58 timeout 0:00:00
    NAT from Outside:0.0.0.0/0 to any:0.0.0.0/0
        flags sIT idle 353:10:21 timeout 0:00:00
    UDP PAT from any:10.10.1.2/52581 to Outside:199.195.168.x/52581 flags ri idle 0:00:00 timeout 0:00:30
    UDP PAT from any:10.10.1.2/55389 to Outside:199.195.168.x/55389 flags ri idle 0:00:03 timeout 0:00:30
    UDP PAT from any:10.10.1.2/51936 to Outside:199.195.168.x/51936 flags ri idle 0:00:04 timeout 0:00:30
    UDP PAT from any:10.10.1.2/51345 to Outside:199.195.168.x/51345 flags ri idle 0:00:09 timeout 0:00:30
    UDP PAT from any:10.10.1.2/55985 to Outside:199.195.168.x/55985 flags ri idle 0:00:18 timeout 0:00:30
    UDP PAT from any:10.10.1.2/49368 to Outside:199.195.168.x/49368 flags ri idle 0:00:22 timeout 0:00:30
    UDP PAT from any:10.10.1.2/52441 to Outside:199.195.168.x/52441 flags ri idle 0:00:23 timeout 0:00:30
    TCP PAT from any:10.10.1.2/57908 to Outside:199.195.168.x/57908 flags ri idle 0:08:37 timeout 0:00:30
    TCP PAT from any:10.10.1.2/57907 to Outside:199.195.168.x/57907 flags ri idle 0:08:37 timeout 0:00:30
    TCP PAT from any:10.10.1.2/57906 to Outside:199.195.168.x/57906 flags ri idle 0:08:37 timeout 0:00:30
    TCP PAT from any:10.10.1.2/57896 to Outside:199.195.168.x/57896 flags ri idle 0:09:09 timeout 0:00:30
    TCP PAT from any:10.10.1.2/57879 to Outside:199.195.168.x/57879 flags ri idle 0:10:23 timeout 0:00:30
    TCP PAT from any:10.10.1.2/49441 to Outside:199.195.168.x/49441 flags ri idle 0:20:52 timeout 0:00:30
    TCP PAT from any:10.10.1.2/57868 to Outside:199.195.168.x/57868 flags ri idle 0:25:28 timeout 0:00:30
    TCP PAT from any:10.10.1.2/60519 to Outside:199.195.168.x/60519 flags ri idle 0:44:11 timeout 0:00:30
    TCP PAT from any:10.10.1.2/60491 to Outside:199.195.168.x/60491 flags ri idle 0:44:20 timeout 0:00:30
    TCP PAT from any:10.10.1.2/60484 to Outside:199.195.168.x/60484 flags ri idle 0:44:35 timeout 0:00:30
    TCP PAT from any:10.10.1.2/60480 to Outside:199.195.168.x/60480 flags ri idle 0:44:51 timeout 0:00:30
    TCP PAT from any:10.10.1.2/53851 to Outside:199.195.168.x/53851 flags ri idle 0:54:14 timeout 0:00:30
    TCP PAT from any:10.10.1.2/57812 to Outside:199.195.168.x/57812 flags ri idle 0:58:30 timeout 0:00:30
    TCP PAT from any:10.10.1.2/57810 to Outside:199.195.168.x/57810 flags ri idle 0:58:32 timeout 0:00:30
    TCP PAT from any:10.10.1.2/53847 to Outside:199.195.168.x/53847 flags ri idle 1:00:18 timeout 0:00:30
    TCP PAT from any:10.10.1.2/57808 to Outside:199.195.168.x/57808 flags ri idle 1:07:58 timeout 0:00:30
    TCP PAT from any:10.10.1.2/60406 to Outside:199.195.168.x/60406 flags ri idle 1:42:13 timeout 0:00:30
    TCP PAT from any:10.10.1.2/49259 to Outside:199.195.168.x/49259 flags ri idle 7:39:44 timeout 0:00:30
    TCP PAT from any:10.10.1.2/49191 to Outside:199.195.168.x/49191 flags ri idle 7:42:39 timeout 0:00:30
    TCP PAT from any:10.10.1.2/55951 to Outside:199.195.168.x/55951 flags ri idle 23:11:40 timeout 0:00:30
    TCP PAT from any:10.10.1.2/55944 to Outside:199.195.168.x/55944 flags ri idle 23:15:19 timeout 0:00:30
    TCP PAT from any:10.10.1.2/55942 to Outside:199.195.168.x/55942 flags ri idle 23:15:24 timeout 0:00:30
    ASA5510# sh conn all
    149 in use, 815 most used
    TCP Outside  74.125.193.108:993 Inside  10.10.1.2:57879, idle 0:12:37, bytes 6398, flags UIO
    TCP Outside  174.35.24.74:80 Inside  192.168.1.20:53879, idle 0:00:01, bytes 0, flags saA
    TCP Outside  174.35.24.74:80 Inside  192.168.1.20:53878, idle 0:00:01, bytes 0, flags saA
    TCP Outside  17.149.36.177:5223 Inside  10.10.1.2:60480, idle 0:16:53, bytes 4539, flags UIO
    TCP Outside  98.22.121.19:443 Inside  192.168.1.20:53877, idle 0:00:02, bytes 0, flags saA
    TCP Outside  98.22.121.19:443 Inside  192.168.1.20:53876, idle 0:00:02, bytes 0, flags saA
    TCP Outside  98.22.121.19:443 Inside  192.168.1.20:53875, idle 0:00:05, bytes 0, flags saA
    TCP Outside  98.22.121.19:443 Inside  192.168.1.20:53874, idle 0:00:05, bytes 0, flags saA
    TCP Outside  98.22.121.19:443 Inside  192.168.1.20:53872, idle 0:00:11, bytes 0, flags saA
    TCP Outside  98.22.121.19:443 Inside  192.168.1.20:53871, idle 0:00:11, bytes 0, flags saA
    TCP Outside  98.22.121.19:443 Inside  192.168.1.20:53868, idle 0:00:08, bytes 0, flags saA
    TCP Outside  98.22.121.19:443 Inside  192.168.1.20:53867, idle 0:00:08, bytes 0, flags saA
    TCP Outside  98.22.121.19:443 Inside  192.168.1.20:53860, idle 0:00:17, bytes 0, flags saA
    TCP Outside  98.22.121.19:443 Inside  192.168.1.20:53859, idle 0:00:17, bytes 0, flags saA
    TCP Outside  17.172.233.95:5223 Inside  10.10.1.2:49191, idle 0:18:48, bytes 7384, flags UIO
    TCP Outside  17.178.100.43:443 Inside  10.10.1.2:57810, idle 0:56:21, bytes 5797, flags UFIO
    TCP Outside  23.206.216.93:80 Inside  10.10.1.2:53847, idle 0:54:15, bytes 2683, flags UFIO
    TCP Outside  143.127.93.90:80 Inside  10.10.1.2:49259, idle 0:12:20, bytes 13315, flags UIO
    TCP Outside  74.125.225.53:443 Inside  192.168.1.20:53864, idle 0:00:11, bytes 0, flags saA
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:49204, idle 0:00:04, bytes 67, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.174:50122, idle 0:00:07, bytes 43, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:63275, idle 0:00:08, bytes 54, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:63306, idle 0:00:18, bytes 51, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:65059, idle 0:00:22, bytes 46, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:64681, idle 0:00:30, bytes 54, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:64661, idle 0:00:30, bytes 51, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.20:55618, idle 0:00:32, bytes 43, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:65056, idle 0:00:33, bytes 48, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.55:59433, idle 0:00:41, bytes 33, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.20:52178, idle 0:00:42, bytes 33, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.174:61414, idle 0:00:43, bytes 34, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:65438, idle 0:00:44, bytes 44, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:63686, idle 0:00:44, bytes 51, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:65416, idle 0:00:45, bytes 45, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.52:53047, idle 0:00:47, bytes 32, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.52:62213, idle 0:00:46, bytes 74, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.52:52347, idle 0:00:46, bytes 92, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.52:58069, idle 0:00:46, bytes 64, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.52:50753, idle 0:00:46, bytes 74, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:65381, idle 0:00:50, bytes 50, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:65082, idle 0:00:50, bytes 51, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:64038, idle 0:00:50, bytes 54, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:49309, idle 0:00:51, bytes 43, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:64034, idle 0:00:51, bytes 54, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:49197, idle 0:00:51, bytes 50, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:64728, idle 0:00:51, bytes 49, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:64309, idle 0:00:51, bytes 54, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:63289, idle 0:00:51, bytes 51, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:64174, idle 0:00:52, bytes 54, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.55:39286, idle 0:01:09, bytes 33, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:63726, idle 0:01:09, bytes 54, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:65482, idle 0:01:12, bytes 51, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:65091, idle 0:01:13, bytes 61, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:64976, idle 0:01:13, bytes 57, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:63749, idle 0:00:51, bytes 103, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:64043, idle 0:01:14, bytes 52, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:64267, idle 0:01:24, bytes 45, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:64467, idle 0:01:26, bytes 45, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:65504, idle 0:01:26, bytes 46, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.55:38946, idle 0:01:35, bytes 33, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:63701, idle 0:01:38, bytes 51, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:63879, idle 0:01:46, bytes 45, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.174:58516, idle 0:01:49, bytes 51, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:63227, idle 0:01:51, bytes 62, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.174:65446, idle 0:01:53, bytes 43, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.2:49166, idle 0:01:55, bytes 54, flags -
    UDP Outside  199.195.168.4:53 Inside  192.168.1.55:56680, idle 0:02:01, bytes 33, flags -
    UDP Outside  192.55.83.30:53 Inside  192.168.1.2:65073, idle 0:00:44, bytes 50, flags -
    TCP Outside  74.125.193.109:993 Inside  10.10.1.2:57808, idle 0:39:33, bytes 6392, flags UFIO
    TCP Outside  74.125.225.54:443 Inside  192.168.1.20:53863, idle 0:00:13, bytes 0, flags saA
    TCP Outside  143.127.93.89:80 Inside  10.10.1.2:60519, idle 0:46:30, bytes 346, flags UO
    TCP Outside  74.125.225.32:443 Inside  192.168.1.20:53881, idle 0:00:01, bytes 0, flags saA
    TCP Outside  74.125.225.32:443 Inside  192.168.1.20:53880, idle 0:00:01, bytes 0, flags saA
    UDP Outside  205.171.3.65:53 Inside  192.168.1.52:60627, idle 0:00:39, bytes 78, flags -
    UDP Outside  205.171.3.65:53 Inside  192.168.1.52:52088, idle 0:00:39, bytes 86, flags -
    UDP Outside  205.171.3.65:53 Inside  192.168.1.52:50533, idle 0:00:39, bytes 76, flags -
    UDP Outside  205.171.3.65:53 Inside  192.168.1.52:63347, idle 0:00:39, bytes 80, flags -
    UDP Outside  205.171.3.65:53 Inside  192.168.1.52:62213, idle 0:00:40, bytes 37, flags -
    UDP Outside  205.171.3.65:53 Inside  192.168.1.52:52347, idle 0:00:40, bytes 46, flags -
    UDP Outside  205.171.3.65:53 Inside  192.168.1.52:58069, idle 0:00:40, bytes 32, flags -
    UDP Outside  205.171.3.65:53 Inside  192.168.1.52:50753, idle 0:00:40, bytes 37, flags -
    UDP Outside  205.171.3.65:53 Inside  192.168.1.174:52254, idle 0:01:09, bytes 43, flags -
    UDP Outside  205.171.3.65:53 Inside  192.168.1.174:50791, idle 0:01:25, bytes 35, flags -
    TCP Outside  74.125.225.46:443 Inside  192.168.1.20:53870, idle 0:00:08, bytes 0, flags saA
    TCP Outside  17.173.255.101:443 Inside  10.10.1.2:53851, idle 0:56:33, bytes 58, flags UfIO
    TCP Outside  64.4.23.147:33033 Inside  10.10.1.2:55944, idle 0:44:45, bytes 558164, flags UFIO
    TCP Outside  74.125.225.35:443 Inside  192.168.1.20:53869, idle 0:00:09, bytes 0, flags saA
    UDP Outside  64.4.23.175:33033 Inside  192.168.1.174:26511, idle 0:01:17, bytes 28, flags -
    UDP Outside  192.54.112.30:53 Inside  192.168.1.2:65380, idle 0:00:44, bytes 49, flags -
    TCP Outside  74.125.142.108:993 Inside  10.10.1.2:57908, idle 0:10:47, bytes 7895, flags UIO
    TCP Outside  74.125.142.108:993 Inside  10.10.1.2:57907, idle 0:10:49, bytes 20323, flags UIO
    TCP Outside  74.125.142.108:993 Inside  10.10.1.2:57906, idle 0:10:47, bytes 6539, flags UIO
    TCP Outside  74.125.142.108:993 Inside  10.10.1.2:57868, idle 0:27:44, bytes 6395, flags UIO
    TCP Outside  91.190.218.59:443 Inside  10.10.1.2:55942, idle 0:41:39, bytes 2727, flags UFIO
    TCP Outside  17.172.233.123:5223 Inside  10.10.1.2:49441, idle 0:23:10, bytes 4409, flags UIO
    TCP Outside  74.125.225.41:443 Inside  192.168.1.20:53862, idle 0:00:16, bytes 0, flags saA
    TCP Outside  74.125.225.41:443 Inside  192.168.1.20:53861, idle 0:00:16, bytes 0, flags saA
    TCP Outside  143.127.93.115:80 Inside  10.10.1.2:60406, idle 0:42:59, bytes 970, flags UFIO
    TCP Outside  143.127.93.118:80 Inside  10.10.1.2:60484, idle 0:46:54, bytes 328, flags UO
    TCP Outside  17.172.233.98:5223 Inside  10.10.1.2:57896, idle 0:11:28, bytes 5081, flags UIO
    UDP Outside  111.221.74.16:33033 Inside  192.168.1.174:26511, idle 0:01:18, bytes 31, flags -
    TCP Outside  17.149.36.103:5223 Inside  192.168.1.174:60729, idle 0:00:04, bytes 0, flags saA
    UDP Outside  192.5.6.30:53 Inside  192.168.1.2:65317, idle 0:00:44, bytes 51, flags -
    UDP Outside  192.12.94.30:53 Inside  192.168.1.2:65356, idle 0:00:44, bytes 54, flags -
    TCP Outside  17.149.36.180:5223 Inside  10.10.1.2:55951, idle 0:46:08, bytes 14059, flags UFIO
    UDP Outside  111.221.74.28:33033 Inside  192.168.1.174:26511, idle 0:01:20, bytes 33, flags -
    TCP Outside  63.235.20.160:80 Inside  192.168.1.20:53873, idle 0:00:08, bytes 0, flags saA
    TCP Outside  50.19.127.112:443 Inside  192.168.1.50:60678, idle 0:00:00, bytes 0, flags saA
    TCP Outside  65.55.122.234:80 Inside  192.168.1.174:60728, idle 0:00:14, bytes 0, flags saA
    TCP Outside  65.55.122.234:80 Inside  192.168.1.174:60727, idle 0:00:15, bytes 0, flags saA
    TCP Outside  65.55.122.234:80 Inside  192.168.1.174:60726, idle 0:00:15, bytes 0, flags saA
    TCP Outside  65.55.122.234:443 Inside  192.168.1.174:2492, idle 0:00:16, bytes 0, flags saA
    TCP Outside  65.55.122.234:2492 Inside  192.168.1.174:2492, idle 0:00:16, bytes 0, flags saA
    UDP Outside  157.55.56.170:33033 Inside  192.168.1.174:26511, idle 0:01:21, bytes 37, flags -
    TCP Outside  74.125.230.207:443 Inside  192.168.1.20:53866, idle 0:00:11, bytes 0, flags saA
    TCP Outside  74.125.230.207:443 Inside  192.168.1.20:53865, idle 0:00:11, bytes 0, flags saA
    UDP Outside  111.221.74.18:33033 Inside  192.168.1.174:26511, idle 0:01:17, bytes 29, flags -
    UDP Outside  8.8.8.8:53 Inside  192.168.1.20:55546, idle 0:00:06, bytes 46, flags -
    UDP Outside  8.8.8.8:53 Inside  192.168.1.20:60277, idle 0:00:06, bytes 46, flags -
    UDP Outside  8.8.8.8:53 Inside  192.168.1.20:55618, idle 0:00:34, bytes 43, flags -
    UDP Outside  8.8.8.8:53 Inside  192.168.1.52:60627, idle 0:00:36, bytes 78, flags -
    UDP Outside  8.8.8.8:53 Inside  192.168.1.52:52088, idle 0:00:36, bytes 86, flags -
    UDP Outside  8.8.8.8:53 Inside  192.168.1.52:50533, idle 0:00:36, bytes 76, flags -
    UDP Outside  8.8.8.8:53 Inside  192.168.1.52:63347, idle 0:00:36, bytes 80, flags -
    UDP Outside  8.8.8.8:53 Inside  192.168.1.20:56958, idle 0:01:24, bytes 34, flags -
    UDP Outside  8.8.8.8:53 Inside  192.168.1.20:51360, idle 0:01:26, bytes 34, flags -
    UDP Outside  8.8.8.8:53 Inside  192.168.1.174:50791, idle 0:01:27, bytes 35, flags -
    UDP Outside  8.8.8.8:53 Inside  192.168.1.20:54134, idle 0:01:46, bytes 34, flags -
    UDP Outside  8.8.8.8:53 Inside  192.168.1.174:58516, idle 0:01:50, bytes 51, flags -
    TCP Outside  23.207.7.46:80 Inside  192.168.1.55:59350, idle 0:00:02, bytes 0, flags saA
    TCP Outside  23.207.7.46:80 Inside  192.168.1.55:59349, idle 0:00:16, bytes 0, flags saA
    UDP Outside  205.171.2.65:53 Inside  192.168.1.174:50122, idle 0:00:09, bytes 43, flags -
    UDP Outside  205.171.2.65:53 Inside  192.168.1.55:48088, idle 0:00:42, bytes 33, flags -
    UDP Outside  205.171.2.65:53 Inside  192.168.1.52:62213, idle 0:00:45, bytes 74, flags -
    UDP Outside  205.171.2.65:53 Inside  192.168.1.52:52347, idle 0:00:45, bytes 92, flags -
    UDP Outside  205.171.2.65:53 Inside  192.168.1.52:58069, idle 0:00:45, bytes 64, flags -
    UDP Outside  205.171.2.65:53 Inside  192.168.1.52:50753, idle 0:00:45, bytes 74, flags -
    UDP Outside  205.171.2.65:53 Inside  192.168.1.174:61414, idle 0:00:47, bytes 34, flags -
    UDP Outside  205.171.2.65:53 Inside  192.168.1.55:54481, idle 0:01:08, bytes 33, flags -
    UDP Outside  205.171.2.65:53 Inside  192.168.1.174:52254, idle 0:01:09, bytes 43, flags -
    UDP Outside  205.171.2.65:53 Inside  192.168.1.55:40285, idle 0:01:34, bytes 33, flags -
    UDP Outside  205.171.2.65:53 Inside  192.168.1.174:65446, idle 0:01:55, bytes 43, flags -
    UDP Outside  205.171.2.65:53 Inside  192.168.1.55:46155, idle 0:02:00, bytes 33, flags -
    UDP Outside  66.104.81.70:5070 Inside  192.168.1.174:57609, idle 0:00:11, bytes 46, flags -
    UDP Outside  64.4.23.156:33033 Inside  192.168.1.174:26511, idle 0:01:14, bytes 38, flags -
    TCP Outside  65.54.167.15:12350 Inside  10.10.1.2:60491, idle 0:11:02, bytes 1405, flags UIO
    TCP Outside  17.172.192.35:443 Inside  10.10.1.2:57812, idle 0:56:11, bytes 6116, flags UFIO
    UDP Outside  157.55.56.176:33033 Inside  192.168.1.174:26511, idle 0:01:16, bytes 32, flags -
    TCP Inside  192.168.1.20:53667 NP Identity Ifc  10.10.1.1:22, idle 0:00:00, bytes 37555, flags UOB
    TCP Inside  10.10.1.2:53431 NP Identity Ifc  10.10.1.1:22, idle 0:09:03, bytes 20739, flags UOB
    Ran on the ASA while overload statements were down on the router:
    ASA5510#   packet-tracer input Inside tcp 192.168.1.100 12345 8.8.8.8 80
    Phase: 1
    Type: ROUTE-LOOKUP
    Subtype: input
    Result: ALLOW
    Config:
    Additional Information:
    in   0.0.0.0         0.0.0.0         Outside
    Phase: 2
    Type: NAT
    Subtype: per-session
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 3
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 4
    Type: NAT
    Subtype: per-session
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 5
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    Phase: 6
    Type: FLOW-CREATION
    Subtype:
    Result: ALLOW
    Config:
    Additional Information:
    New flow created with id 1988699, packet dispatched to next module
    Result:
    input-interface: Inside
    input-status: up
    input-line-status: up
    output-interface: Outside
    output-status: up
    output-line-status: up
    Action: allow
    Had to put these back in to get to the internet:
    CISCO-2811#conf t
    Enter configuration commands, one per line.  End with CNTL/Z.
    CISCO-2811(config)#inter
    CISCO-2811(config)#interface f
    CISCO-2811(config)#interface fastEthernet 0/0
    CISCO-2811(config-if)#ip nat
    CISCO-2811(config-if)#ip nat Outside
    CISCO-2811(config-if)#exit
    CISCO-2811(config)#in
    CISCO-2811(config)#interface f
    CISCO-2811(config)#interface fastEthernet 0/1.3
    CISCO-2811(config-subif)#ip nat inside
    CISCO-2811(config-subif)#exit
    CISCO-2811(config)#$de source list 1 interface FastEthernet0/0 overload
    CISCO-2811(config)#
    Screenshot of ASDM:

  • Create Routing Groups using BAPI_ROUTING_CREATE Limitation?

    Hi all,
    I am doing a conversion for the routing groups for PP. The routing groups include sequence, operation number, material assigned and component allocation.
    In this project, the BOM size of the material is super huge, thus to ease the conversion. I have used Function module to download the BOM structure and then allow user to maintain manually the operation and sequence. After that I will use BAPI BAPI_ROUTING_CREATE to do the conversion.
    And I manage to get all operation, sequences, material assigned and component allocated. However, I face a problem as the BOM size keep increasing and same material BOM might be assigned to different header BOM at the same time. Thus, key field such as level and path is important for the input.
    Note: Please check the order path in CA03, the technical name is STPOB-WEGXX1 with attribute type DEC length 4.
    In my case, the Order Path is more than 99... around few hundreds....  But the issue is the order path field used in the BAPI_ROUTING_CREATE: BAPI1012_COM_C-ORDER_PATH is only has attribute type NUMC length 2.
    Either I get a short dump by passing in the order path, or I might miss out the some component allocation using the BAPI. Anyone faces this before? Please advise.
    Thanks.
    Best regards,
    Vin

    Hi Vivek,
    I got this reply from SAP.
    ORDER_LVL and ORDER_PATH need not be filled, but PATH has to be
    filled with the KANTE values.
    The logic to calculate path value is the same as the kante value.
    (PATH)
    A (N) 0
    -> B (P) 1
    -> B1(N) 1
    -> B2(P) 2
    -> C (P) 3
    -> C1 (N) 3
    -> C2 (P) 4
    N- normal item P- phantom
    Note 305919 details this.
    However, it quite confuses me as I read through sapnote 305919 : It seems like what is been replied from SAP does not really correct.
    Symptom
    You want to create component allocations to phantom assemblies using batch or direct input. In order to uniquely identify the phantom assembly, you must enter the level and the path. This note describes how the SAP System assigns the level and the path.
    Thus, I will continue to check with SAP. I think this is the inconsistency of the database and the BAPI, correct me if I am wrong.
    Thanks a lot.
    Regards,
    Vin

Maybe you are looking for

  • ShowDocument works on Windows but not Mac

         public void actionPerformed(ActionEvent ae) {           String command = ae.getActionCommand();           if(command.equals("save"))                String insertHTML = getDocumentText();                showDoc("ProcessPage.asp?BodyCopy='Test'","

  • JDBC  Adapter Stored Procedure Query

    Hi All, I hav a scenario where i hav to call a Stored procedure. The stored procedure returns 3 result set objects (in other words, has 3 select statements). I had configured a JDBC Sender adapter which contains the Execute statement of the Stored Pr

  • Flat File Destination Multiple Delimiters

    Hi Guys, This might been an easy one for you. I need to find out if the data from a table can be loaded into a text file with multiple delimiters or not using SSIS? For example, if I have 2 columns of data from a table, ID Name 100 Mark I need to loa

  • Smartform tasks in one program

    HI EXPERTS, i want smartform form abap program, then getting spool number on the behave of smartform , then download smartform as pdf attachment , then the pdf is sent via mail . is it possible to get all from one program, reply at your own risk sunn

  • Updating iphone4 with ios5: having problems

    I was trying to update my wife's iphone4 to ios5; the phone now says configure, with options of:    set it up as a new phone    restore from itunes backup I selected the backup option but it just hangs saying connect to itunes and does not proceed an