CUCM 6.1 - Phone Directory - how to add second number?

Does it possible to add another directory like corporate directory, or how can we add people's second number to corporate directory?
thanks

Yes you can add a second directory - if you look at your enterprise parameters, you'll see that there's an url for the directory. Enter that url into your webbrowser.. you'll see it's a regular CiscoIpPhoneMenu.. so you an create a page like that but with a second entry, and then the second directory will also be listed when you press the directory key.

Similar Messages

TS2432 I do not know how to add a number to my contacts

I do not know how to add a number to my contacts

Contacts then click on the plus sign in the top right hand corner to add a contact.
If you are trying to do it from a call you received then go to phone>Recents and click on the blue arrow on the right then scroll down to either create new contact or add to existing contact.

Payment program F110 - how to add second print program in customizing

Hello all,
i would like to add second (another print program after standard sapscript print program customized in table T042Z) print program in transaction F110. This second smartform print program should be customizable and triggered automatically within payment run.
Thanks, zd.

Hi,
You can assign two forms in FBZP.
Payment methods per company code
Double click on payment method
In Form Data
You can assign Next Form
Both the forms should get printed when you run F110.
Thanks,
Ravi

HT1451 how to add second library to i tune on pc

how to create second i tune library on pc

Hold down the shift button while opening Itunes, you will see create new libary

How to add second A/P Down Payment or A/P Reserve Invocie

Hi
A/P with following terms:
- 30% Down Payment after issuing PO
- 70% Payment before shipping
For the 30% DPM an A/P Down Payment Invoice is posted, and later paid - no issues so far.
Now, before scheduled shipping the rest of 70% is due. The correct thing would be to post a A/P Reserve Invoice.
However, the Total Down Payment selection dialog available in A/P Invoice is missing in the A/P Reserve Invoice.
As a workaround, direct posting of an A/P Invoice is possible, but this already does post all the items to stock which is not correct.
Creating another A/P Down Payment Invoice seems not to be the correct solution either.
How does SAP suggest to handle this?
Thanks and best regards,
Franz

Kerstin,
I'd like to pick this up again and add some questions:
First, what is the purpose of posting the Final Invoice at the end (7.) - except for closing the GRPO?
Second, I have some issues with Freight cost.
If I already know freight cost when I create the PO and add it there, it is not shown in the DPM Request nor in the DPM Invoice. Since I am really paying it in step 5, I need to add it somehow - I did as 'divers-item' what I feel is somehow nor really correct - to the DPM invoice, otherwise I can not post the correct outgoing payment.
Is the final invoice the place to add the freight at its correct position? I'd like these freight cost to add to the item cost as well, as they do with any other usual PO.
Any suggestion on how to handle the freight cost, that usually is not known before the 2nd (70%) payment?
Thanks and best regards,
Franz

Help: How to add serial number data into Delivery Order document

Dear Gurus,
I am creating an interface program and I have problem in attaching the serial number data to the corresponding material code for a certain delivery order document in R/3 4.6C SP22 system.
The serial number can be attached either during the creation of the Delivery Order itself or in the subsequent step after creating the Delivery Order (i.e.: create the D/O document first, and then update the D/O data).
The BAPI_OUTB_DELIVERY_CONFIRM_DEC FM does not provide any input parameter to let me put the serial number in this R/3 version.
By tracing in SE30 the standard program VL02N --> Menu --> Extras --> Serial Number --> Continue (Enter) --> Save (Ctrl+S), I found out that the serial attachment 'might' be done during sub-routine SERIAL_LISTE_POST_LS in program SAPLIPW1. It will in turn executes FM SERIAL_LISTE_POST_LS. The commit to database table will be done in update task by FM OBJK_POST_UPDATE_N and SERIAL_POST_UPDATE_LS.
<b>My question:</b>
============
1. Is FM SERNR_ADD_TO_LS can be used to attach the serial number to D/O?
If yes, how to do it please because I already tried it I can not see the serial information in VL02N after that. There is no any insert or update to database in this function module. Should I call other FM after this? I want to try to call FM OBJK_POST_UPDATE_N and SERIAL_POST_UPDATE_LS but I do not know how I can retrieve the global object such as XOBJK_ALL that is necessary for the input parameter.
2. If SERNR_ADD_TO_LS can not be used, what other FM can I use? Can I call SERIAL_LISTE_POST_LS instead? Is there any reliable way to generate the import parameter for this FM, such as XSER00, XSER01, XOBJK_ALL and XEQUI?
Thank you in advanced for your kind assistance.
Best Regards,
Hiroshi

Try something similar to this below...
Afterwards you should do a call transaction to VL02N and immediately SAVE. This is sufficient to ensure the status on the serial numbers is updated correctly.
FUNCTION z_mob_serialnr_update_ls.
""Local interface:
*" IMPORTING
*" VALUE(VBELN_I) LIKE LIKP-VBELN
*" TABLES
*" SERNO_TAB STRUCTURE RISERLS
*" YSER00 STRUCTURE SER00 OPTIONAL
*" YSER01 STRUCTURE RSERXX OPTIONAL
*" YOBJK_ALL STRUCTURE RIPW0 OPTIONAL
*" YEQUI STRUCTURE RIEQUI OPTIONAL
*" YMASE STRUCTURE MASE OPTIONAL
*" EXCEPTIONS
*" NO_EQUIPMENT_FOUND
The modified/confirmed table of serial numbers is supplied in
SERNO_TAB.
These are updated in the SAP tables
YSER00 - General Header Table for Serial Number Management
YSER01 - Document Header for Serial Numbers for Delivery
YOBJK_ALL - Internal Table for Object List Editing/Serial Numbers
YEQUI - Internal Structure for IEQUI
local data
DATA: BEGIN OF del_wa,
vbeln LIKE likp-vbeln,
posnr LIKE lips-posnr,
matnr LIKE lips-matnr,
lfimg LIKE lips-lfimg.
DATA: END OF del_wa.
DATA: del_tab LIKE del_wa OCCURS 0.
DATA: _ct TYPE i.
DATA: lastobknr LIKE objk-obknr.
DATA: _debug.
CLEAR: yser00, yser01, yobjk_all, yequi, ymase.
REFRESH: yser00, yser01, yobjk_all, yequi, ymase.
GET PARAMETER ID 'ZEDI_DEBUG' FIELD _debug.
OBJECT KEYS
read the delivery items with serial numbers to be processed
SELECT * INTO CORRESPONDING FIELDS OF TABLE del_tab
FROM lips
WHERE vbeln = vbeln_i
AND serail NE space.
if nothing is relevant for serial numbers bailout
DESCRIBE TABLE del_tab LINES _ct.
IF _ct IS INITIAL.
EXIT.
ENDIF.
==== read the existing object keys for delivery items
SELECT * INTO CORRESPONDING FIELDS OF TABLE yser01
FROM ser01
WHERE lief_nr = vbeln_i.
IF sy-subrc = 0.
yser01-dbknz = 'X'. "entry exists in db
MODIFY yser01 TRANSPORTING dbknz WHERE dbknz = space.
ENDIF.
== check if there is a header entry for the delivery item
LOOP AT del_tab INTO del_wa.
READ TABLE yser01 WITH KEY lief_nr = del_wa-vbeln
posnr = del_wa-posnr.
IF sy-subrc NE 0.
create one
CALL FUNCTION 'OBJECTLIST_NUMBER'
IMPORTING
obknr = yser01-obknr.
yser00-mandt = sy-mandt.
yser00-obknr = yser01-obknr.
APPEND yser00.
SELECT SINGLE kunnr INTO (yser01-kunde)
FROM likp
WHERE vbeln = vbeln_i.
yser01-mandt = sy-mandt.
yser01-lief_nr = del_wa-vbeln.
yser01-posnr = del_wa-posnr.
yser01-vorgang = 'SDLS'.
yser01-vbtyp = 'J'.
yser01-bwart = '601'.
yser01-dbknz = space. "not in db
yser01-loknz = space. "do not delete
APPEND yser01.
ENDIF.
ENDLOOP.
check if any entries should be deleted
LOOP AT yser01.
READ TABLE serno_tab WITH KEY vbeln = yser01-lief_nr
posnr = yser01-posnr.
IF sy-subrc NE 0.
yser01-loknz = 'X'. "mark for delete
MODIFY yser01.
ENDIF.
ENDLOOP.
collect all the object keys for the delivery item with s/n's
LOOP AT yser01.
READ TABLE serno_tab WITH KEY vbeln = yser01-lief_nr
posnr = yser01-posnr.
IF sy-subrc = 0.
READ TABLE yser00 WITH KEY obknr = yser01-obknr.
IF sy-subrc NE 0.
yser00-mandt = yser01-mandt.
yser00-obknr = yser01-obknr.
APPEND yser00.
ENDIF.
ENDIF.
ENDLOOP.
IF NOT _debug IS INITIAL. BREAK-POINT. ENDIF.
SERIAL NO OBJECTS
==== read the existing serial numbers from the database
via object number into YOBJK_ALL
LOOP AT yser00.
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE yobjk_all
FROM objk
WHERE obknr = yser00-obknr.
ENDLOOP.
yobjk_all-dbknz = 'X'.
MODIFY yobjk_all TRANSPORTING dbknz WHERE dbknz = space.
=== add any new serial numbers
LOOP AT serno_tab.
READ TABLE yser01 WITH KEY lief_nr = serno_tab-vbeln
posnr = serno_tab-posnr.
READ TABLE yobjk_all WITH KEY sernr = serno_tab-sernr
matnr = del_wa-matnr.
IF sy-subrc NE 0.
this is a new serial number
yobjk_all-mandt = sy-mandt.
yobjk_all-obknr = yser01-obknr.
yobjk_all-obzae = 0.
yobjk_all-equnr = yequi-equnr.
yobjk_all-objvw = 'S'.
yobjk_all-sernr = serno_tab-sernr.
yobjk_all-matnr = del_wa-matnr.
yobjk_all-datum = sy-datum.
yobjk_all-taser = 'SER01'.
yobjk_all-equpd = 'X'.
yobjk_all-objnr = yequi-objnr.
yobjk_all-dbknz = space.
yobjk_all-loknz = space.
APPEND yobjk_all.
ENDIF.
ENDLOOP.
=== mark any which are no longer confirmed as deleted
LOOP AT yobjk_all.
READ TABLE yser01 WITH KEY obknr = yobjk_all-obknr.
READ TABLE serno_tab WITH KEY vbeln = yser01-lief_nr
posnr = yser01-posnr
sernr = yobjk_all-sernr.
IF sy-subrc NE 0.
yobjk_all-loknz = 'X'.
MODIFY yobjk_all TRANSPORTING loknz.
ENDIF.
ENDLOOP.
EQUIPMENT RECORDS
== get the equipment records
LOOP AT yobjk_all.
SELECT SINGLE * INTO CORRESPONDING FIELDS OF yequi
FROM equi
WHERE sernr = yobjk_all-sernr
AND matnr = yobjk_all-matnr.
IF sy-subrc NE 0.
CONTINUE.
ENDIF.
IF yobjk_all-dbknz = space AND
yobjk_all-loknz = space.
yequi-dbknz = 'X'.
yequi-obknr = yobjk_all-obknr.
yequi-j_vorgang = 'PMS3'. "add to delivery
yequi-matnr_old = yequi-matnr.
APPEND yequi.
yobjk_all-equnr = yequi-equnr.
MODIFY yobjk_all TRANSPORTING equnr.
CONTINUE.
ENDIF.
IF yobjk_all-dbknz = 'X' AND
yobjk_all-loknz = 'X'.
yequi-dbknz = 'X'.
yequi-j_vorgang = 'PMSA'. "delete from delivery
yequi-matnr_old = yequi-matnr.
APPEND yequi.
CONTINUE.
ENDIF.
ENDLOOP.
remove any Equipment records that do not need to be processed
DELETE yequi WHERE j_vorgang IS initial.
IF NOT _debug IS INITIAL. BREAK-POINT. ENDIF.
fill the object counter
LOOP AT del_tab INTO del_wa.
READ TABLE yser01 WITH KEY lief_nr = del_wa-vbeln
posnr = del_wa-posnr.
DO del_wa-lfimg TIMES.
READ TABLE yobjk_all WITH KEY obknr = yser01-obknr
obzae = sy-index.
IF sy-subrc NE 0.
READ TABLE yobjk_all WITH KEY obknr = yser01-obknr
obzae = 0.
IF sy-subrc = 0.
yobjk_all-obzae = sy-index.
MODIFY yobjk_all INDEX sy-tabix TRANSPORTING obzae.
ENDIF.
ENDIF.
ENDDO.
ENDLOOP.
IF NOT _debug IS INITIAL. BREAK-POINT. ENDIF.
===========================================
update the delivery
===========================================
CALL FUNCTION 'SERIAL_LISTE_POST_LS'
TABLES
xser00 = yser00
xser01 = yser01
xobjk_all = yobjk_all
xequi = yequi
xmase = ymase.
TAB_CUOBJ =
XSER03 =
CALL FUNCTION 'STATUS_BUFFER_EXPORT_TO_MEMORY'
EXPORTING
i_memory_id = memid_status.
COMMIT WORK AND WAIT.
CALL FUNCTION 'Z_MOB_SERIALNR_REFRESH_LS'
EXPORTING
ctu = 'X'
mode = 'N'
UPDATE = 'L'
GROUP =
USER =
KEEP =
HOLDDATE =
NODATA = '/'
vbeln_i = vbeln_i.
IMPORTING
SUBRC =
TABLES
MESSTAB =
ENDFUNCTION.
FUNCTION z_mob_serialnr_refresh_ls.
""Local interface:
*" IMPORTING
*" VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*" VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*" VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*" VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*" VALUE(USER) LIKE APQI-USERID OPTIONAL
*" VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*" VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*" VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*" VALUE(VBELN_I) LIKE LIKP-VBELN
*" EXPORTING
*" VALUE(SUBRC) LIKE SYST-SUBRC
*" TABLES
*" MESSTAB STRUCTURE BDCMSGCOLL OPTIONAL
DATA: vbeln_001 LIKE bdcdata-fval.
vbeln_001 = vbeln_i.
subrc = 0.
PERFORM bdc_nodata USING nodata.
PERFORM open_group USING group user keep holddate ctu.
PERFORM bdc_dynpro USING 'SAPMV50A' '4004'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LIKP-VBELN'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LIKP-VBELN'
vbeln_001.
PERFORM bdc_dynpro USING 'SAPMV50A' '1000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=PSER_T'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LIPS-POSNR(01)'.
PERFORM bdc_dynpro USING 'SAPLIPW1' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RIPW0-SERNR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=RWS'.
PERFORM bdc_dynpro USING 'SAPMV50A' '1000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH_T'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LIPS-MATNR(02)'.
PERFORM bdc_transaction TABLES messtab
USING 'VL02N'
ctu
mode
update.
IF sy-subrc <> 0.
subrc = sy-subrc.
EXIT.
ENDIF.
PERFORM close_group USING ctu.
ENDFUNCTION.
INCLUDE bdcrecxy.

How To Add Serial Number Dynamically

Dear all,
In a dynamic form I require to add cosecutive serial no to the dynamically generated fields.How can I do it?If any body can please help me.
Thanking you
Rakesh

I too need to be able to add a sequence number to each new row that is added to a dynamic form. The fields are being added / deleted as they should be but my JavaScript knowledge is not up to the level where I am able to address individual fields in each new row.
I've tried script along the lines of:
_detail[0].Item_Sequence.rawValue = 1;
_detail[1].Item_Sequence.rawValue = 2;
Where "detail" is the subform that contains the 'dynamic' rows
"Item_Sequence" is a numeric field in each row.
Please help to put an old IBM mainframe developer out of his misery and get to grips with this wonderful world of new fangled Adobe object-oriented technology.

How to add second access point using coax

I have FIOS with the coax line split out of the main fios box. One split goes to room A that has the Actiontec router and a STB. The other line goes into room B where there is just a STB. I have poor wireless signal in room B and I would like to add a second access point. I've read up on the devices that try to amplify your signal and see that they tend to reduce speeds, so this does not seem like a viable option. Because of my building arrangement, I can't do any sort of new wiring.
I'd like to try to minimize how much configuration I have to do and even if it means paying a bit more to do so. From what I can tell, I could split the coax in Room B and plug in an ActionTEC ECB2200. But, this would only give me a ethernet connection. If I plug in a second router via that ethernet connection, would that give me a second access point? Would I need to set up the second router in bridge mode? If this is the case, would it just make sense to plug the second router in without the ActionTEC ECB2200 in bridge mode from the coax input?
Thanks in advance.
BT
Solved!
Go to Solution.

sabretd wrote:
Actually I just came across this link, which I think explains what I need to do as item 2:
http://www.dslreports.com/faq/15984
Yes, this is Section 3.2 in the link I provided earlier.
sabretd wrote:
My only question is, when starting the process and performing the following:
2.1) You will need to reconfigure the remote router, BEFORE you connect it to the coax.
Perform a hard reset on the Actiontec to restore factory defaults.
Connect a PC to a LAN port of the Actiontec.
By default, DHCP server should be enabled on the Actiontec, so no need to set a static IP address on the PC.
Login to the router at 192.168.1.1
How do I connect the primary and secondary actiontec? Do I disconnect the primary and plug the secondary into coax and do all this, and then when finished plug the primary back in? Or, do i Ieave the primary plugged in the whole time?
First you set up the secondary router by connecting it to any computer using an Ethernet cable. Assuming you have reset the device, go to 192.168.1.1 and make the necessary changes in router number two.
Leave the primary router alone (unless you decide on a scheme with a fixed IP for the second router) and it will supply an IP to router two, which will serve as a simple wireless access point. Detailed settings and a step-by-step cookbook procedure are provided in the references given above. Good luck.

How to add increment number to file name properly

Hi, all:
I have a simple question. As shown in the attached code, I need to add an increment number to file name and save the file. The problem is, if you run the code and put something like ".dat" in the extension name, you will see a blank space between the number and the dot in the file name. What should I do to eliminate the blank space? I can't specify the format of the file name since the file name would vary from case to case.
Thanks a lot for any suggestion and correction in advance.
Attachments:
temp.vi ‏11 KB

Hi,
Please take a look to the attached VI. I hope that I understood what you really want.
I've replaced the Vi: Format into string with Number to Decimal String plus a Concatenate String.
Now, this is working for me, I don't get a space anymore. If something is wrong, please let me know.
Regards,
Paul
Attachments:
temp_back.vi ‏11 KB

How to add Serial Number to the batch report name?

How to format the report name for batch model to have <Sequencename>_<batch_SerialNumber>_<DateTime>.xml. Everytime a different sequence is executed the report file name should be formated with that sequence name and batch serial number porvided. I am using TS4.1
Sequential model has a Determine Report File Path, is there something similar for batch model also, if so where?
Thanks.
CLD,CTD

Did hit Post too early, here is the remaining,
For the second part
have the serial number of each individual DUTs included in its file name
The setting in Report Option will also save the UUT report with UUT serial Number included in the following format:
SeqFileName_[UUT][Date][Time].xml where [UUT] will store the UUT serail number.
CLD,CTD
Attachments:
reportOptions.jpg ‏85 KB

Idea Center B520 - how to add second monitor?

I want to add a second monitor to my B520, but the only monitors I have connect with a DVI cable. I don't see a DVI plug anywhere on the B520. Is there a way? If not, if I buy a monitor with HDMI connections, can I connect it to my B520 using HDMI? My B520 is 3D and touch screen. Thanks in advance. New to the all-in-one world.

I have my B520 connected to my 42" Monitor via a HDMI cable
Go to Control Panel > Appearance and Personalization > Display > Screen Resolution, and then choose 'Detect'. (It is my understanding, you need to make the B520 your 'main display', or you can not use Touch on the B520)
You will also need to set your Monitor Source to 'HDMI' (My old PC is still connected to my Monitor via Source 'DVI'. It allows me to use my old PC, and new B520, on the same Monitor; by just changing the Source)
As for connecting the B520 to an external Monitor that does not have HDMI Input ... there are cables, and adaptors, that you buy to convert HDMI to DVI (or whatever). Once you have the converter, then choose the applicable Source on you Monitor.
http://www.mcmelectronics.com/product/24-11052

How to add Auto-Number column

I want my PK column to be an Auto-Number field? Preferably like a number(10) col that has a seed of 1 and increments by 1, no cryptic guid #.
Also, how do I insert an explicit value into the Auto-Number field?
e.g. - preserving the ID column value of 1:
insert into mytable (ID, Name)
values (1, 'Chris')
Thanks in advance
Chris

You would have to use a sequence in combination with a before insert trigger.
In that trigger you will get the next value from the sequence and insert it into the correct field.
If you need the generated number in an other insert (e.g. parent-child tables), you can use the returning clause.
Technicly it is possible to insert a explicit value (in the trigger you would check if there is a value given for that field), but it would be bad practice if it concerned an key field.
greetings
Freek D
I want my PK column to be an Auto-Number field? Preferably like a number(10) col that has a seed of 1 and increments by 1, no cryptic guid #.
Also, how do I insert an explicit value into the Auto-Number field?
e.g. - preserving the ID column value of 1:
insert into mytable (ID, Name)
values (1, 'Chris')
Thanks in advance
Chris

SCCM 2012 R2 - How to add second Software Distribution?

I already have a Primary site server setup so I added another site system server so I could add the Distrubution Point to a remote 2012 R2 server (hope that was correct?)
Now I would like to also add the Software Distribution role to that secondary server. I'd like the types (security, optional, etc...), of software updates pulled from my primary site, but want the actually updates pulled from Microsoft. To have that setup
do I install the WSUS role on my secondary site server and then add the Software Update role?

Hi,
WSUS when used in SCCM as a SUP is only used for the clients to download the information about which updates exist, the actual updates are downloaded from the assigned DP. There is no way to configure a client to download security updates from SCCM and the
rest from Internet.
Yes, you did correct, it is not a Secondary site though it is a Site System for your Primary site if that is the same site server you are refereing to later.
The data actually downloaded by the clients from the SUP is not that much so it is normally no ide to install a new SUP.
Regards,
Jölrgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

How to add Serial Number to the report name?

HI,
I'd like to add the option of including the SN to the report name. A good option will be to automatically set the default base name to the SN.
I'm open to suggestions. Either a simple solution where I'll always get the SN as the base name, or
a more complicated solution where I can really make some modifications to the report option dialog page to include that upon user selection.
Thanks
Rafi
TS3.5+CVI8.0
p.s. an example, if exist, will be highly useful (and appreciated of course)

That's okay... I can answer here as well...
Under Configure >> Report Option
UNSELECT "Store UUT Report in Batch Report File" first, then select "New UUT Report File for Each UUT"
New UUT Report File for Each UUT—Appends a string containing the current UUT serial number to the base name of the report file. For example, uut_report.html becomes uut_report[SN000001].html. This setting is not available if you select Store UUT Report in Batch Report File.

How To Add Second Website In Lion Server 10.7.3

I currently have Lion Server Running on a Mac Mini, communicating on a LAN (Intranet) with no Internet access intended at this time. I'd like to host a second website.
Can that be done? And how?
Lion Server 10.7.3
Enabled - File Sharing, Wiki, Website
Computer Name - apollo
Host Network - lunar.local
Server Website - lunar.local
Thank you

I'm in the same boat. No clue why this error keeps popping up but its driving me nuts and appears to be killing my ability to get the OD setup.

CUCM 6.1 - Phone Directory - how to add second number?

Similar Messages

Maybe you are looking for