Cucm 7.1.3 cisco DB down on Publisher

Dear Experts,
Database communication error while login into Publisher admin.and from subscriber i can see in unified reporting CM Cluster overview active services status A cisco DB down on Publisher cucm version 7.1.3 1 publisher and 1 subscriber on MCS 7816I4 below are the cli dbrelication status
I have resarted the publisher from OS Admin but no luck.any other workaround highly appreciated.
admin:utils dbreplication status
-------------------- utils dbreplication status --------------------
Traceback (most recent call last):
File "/usr/local/cm/bin/DbReplStatus.py", line 98, in ?
fout = open(tmpOutputFile, 'w');
IOError: [Errno 30] Read-only file system: '/tmp/ReplicationStatus.2012_12_26_08_44_59.out'
admin:utils service list
Requesting service status, please wait...
System SSH [STARTED]
Cluster Manager [STARTED]
Service Manager is running
Getting list of all services
>> Return code = 0
A Cisco DB[STOPPED] Component is not running
A Cisco DB Replicator[STARTED]
Cisco AMC Service[STARTED]
Cisco AXL Web Service[STARTED]
Cisco Audit Event Service[STARTED]
Cisco Bulk Provisioning Service[STARTED]
Cisco CAR Scheduler[STARTED]
Cisco CAR Web Service[STARTED]
Cisco CDP[STARTED]
Cisco CDP Agent[STARTED]
Cisco CDR Agent[STARTED]
Cisco CDR Repository Manager[STARTED]
Cisco CTIManager[STARTED]
Cisco CTL Provider[STARTED]
Cisco CallManager[STARTED]
Cisco CallManager Admin[STARTED]
Cisco CallManager Attendant Console Server[STARTED]
Cisco CallManager Cisco IP Phone Services[STARTED]
Cisco CallManager Personal Directory[STARTED]
Cisco CallManager SNMP Service[STARTED]
Cisco CallManager Serviceability[STARTED]
Cisco CallManager Serviceability RTMT[STARTED]
Cisco Certificate Authority Proxy Function[STARTED]
Cisco Certificate Expiry Monitor[STARTED]
Cisco DHCP Monitor Service[STARTED]
Cisco DRF Local[STARTED]
Cisco DRF Master[STARTED]
Cisco Database Layer Monitor[STARTED]
Cisco Dialed Number Analyzer[STARTED]
Cisco DirSync[STARTED]
Cisco Extended Functions[STARTED]
Cisco Extension Mobility[STARTED]
Cisco Extension Mobility Application[STARTED]
Cisco IP Manager Assistant[STARTED]
Cisco IP Voice Media Streaming App[STARTED]
Cisco License Manager[STARTED]
Cisco Log Partition Monitoring Tool[STARTED]
Cisco Messaging Interface[STOPPED] Component is not running
Cisco RIS Data Collector[STARTED]
Cisco RTMT Reporter Servlet[STARTED]
Cisco SOAP - CDRonDemand Service[STARTED]
Cisco Serviceability Reporter[STARTED]
Cisco Syslog Agent[STARTED]
Cisco TAPS Service[STARTED]
Cisco Tftp[STARTED]
Cisco Tomcat[STARTED]
Cisco Tomcat Stats Servlet[STARTED]
Cisco Trace Collection Service[STARTED]
Cisco Trace Collection Servlet[STARTED]
Cisco UXL Web Service[STARTED]
Cisco Unified Mobile Voice Access Service[STARTED]
Cisco WebDialer Web Service[STARTED]
Host Resources Agent[STARTED]
MIB2 Agent[STARTED]
Native Agent Adapter[STARTED]
SNMP Master Agent[STARTED]
SOAP -Log Collection APIs[STARTED]
SOAP -Performance Monitoring APIs[STARTED]
SOAP -Real-Time Service APIs[STARTED]
System Application Agent[STARTED]
Primary Node =true

Hi John,
Were there any changes made recently?
Can you send the outputs for the following:
From the Pub:
show status
utils diagnose test
utils ntp status
show network eth0 detail
show tech network hosts
utils network ping
utils network host
utils network host
From the Sub:
show status
utils diagnose test
utils ntp status
show network eth0 detail
show tech network hosts
utils network ping
utils network host
utils network host
utils network connectivity
Regards,
Harmit.

Similar Messages

Captivate shuts down after publishing

Has anyone experienced Captivate shutting down after
publishing? This keeps happening to an instructor, and I'm not sure
of the solution. Is there a preference that I'm not aware of?
Christine

Hi Christine
If mattturley's advice fails to help, you may also want to
examine the path you are publishing to. I seem to recall that this
issue can also appear if your output path is too long.
For example, if your current path is:
C:\Documents and Settings\Rick Stone\My Documents\My Adobe
Captivate
Projects\Cap2InstructorRollovers\Captions\Assets\WonderfulProjects\ThisWonderfulProject
Try moving it closer to the root, as in:
C:\CaptivateProjects\MyProject
Cheers... Rick

CUCM 8.6.2 Subscriber is down!!!!

Hi,
Can anyone please help me in this I have got 2 clusters of CUCM 8.6.2 one is Pub and another one is Sub. In the cluster there are 4 nodes
1. CUCM - Pub
2. CUPC
3. UCCX
4. UCXN
1. CUCM - Sub
2. CUPC
3. UCCX
4. UCXN
This complete structure is in VMware. Today my Sub went down completely and all the phones are now registered to PUB. When I went to see in VSphare client to see what is going on I saw that in the CUCM node --> console it is rebooting automatically and is then giving error and asking to insert Recovery disk. When I tried to ping other nodes in the cluster they were completely fine no problems in it. Please see the attached error file. I will really thankful if any one able to help me out in this.
Thank You,
Kind Regards
Rohit Mangotra.

Hi Rohit,
Download the recovery iso from this location and boot up the subscriber from this iso.
http://software.cisco.com/download/release.html?mdfid=283782839&flowid=26422&softwareid=282074294&release=8.6%282a%29&relind=AVAILABLE&rellifecycle=&reltype=latest
Once there it will give you the option to run an automatic or manual file system check. Try the automatic one first and if it does not work then try manual file system check. Thes kind of issues can occur because of improper shutdowns and may lead to reinstallation of sub in case the recovery disk does not fix the issue.
HTH
Manish

Running CUCM 8x/9x on Cisco UCS - Design

Hi,
I have a design question popping in my mind regarding running CUCM 8.X/9X on UCS.
Let us say that I have initially configured a CUCM Publisher and Subscriber to run on a Cisco UCS server using the VMware OVA Template that allows for 2500 IP Phones.
Both CUCM servers have been installed and setup using the specs from an OVA that allows 2500 IP Phones. Later, I decide to increase the capacity of the same hosts from 2500 IP Phones to support 7500 IP Phones.
Do I need to build up new CUCM servers using an OVA Template that allows 7500 IP Phones per server or do I modify the existing CUCM VMware host settings such as increase the RAM, HDD, etc.
Warm regards,
JK.

Check out the resize support:
http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements#Resize_Virtual_Machine
Since the 2500 OVA have different storage requirements from the 7500 OVA you will need to rebuild the VM for full support.
http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_Unified_Communications_Manager_(CUCM)#Version_9.1.28x.29
HTH,
Chris

Cisco Show and Share Publish

Hello Everyone
Regarding to Cisco show and share , I have a question regarding to the URL which will be accessed by Cisco Show and Share users , is this URL same as the URL which is used for Administration?. I have two Show and share on for internal and other for External users , each one have URL. MY question regarding to end users access after i will pubblesh videos , they will access the same URL which is used to access administration page?. Your help is so highly apperciated for me.
Thanks

hello kamel,
i am not quite sure that i have understood your question but most probably is related with the following:
1) the SNS url either for end users or even for the admin is the same. For example, the "sns.video.com" url will be used both from admins and end users. Though, the admin, has some more privileges against end users and thus can access more pages on the same URL.
2)as for the internal and external sns servers, i believe that you have to deploy your videos twice if you want to have the same videos on both servers.
ifthe above doesnt answer to your questions please let me know.
thank you

Cisco ASA - Web Server Publishing

My requirement is I need to publish 2 Web Servers to internet behind Cisco ASA.
The users will be using secure https acccess to the Web Server.
I have only 1 Public IP Address assigned to access both the Web Servers.
Wanted to know what are the things required in the Cisco ASA firewall.
1. What type of licenses ?
2. What type of certificates ?
3. How can i use a single Public IP to access to both the Web servers. Does the Cisco ASA supports this.
I dont want any client software on the end users PC.....

ThanksI do have 2 Public IP address for my 2 servers.That is clear.
I thought you said you just have 1 Public IP in your first post. Anyways, if you do have 2 Public IPs for each server, then use Static NAT instead of PAT. Use the same commands but without the port information.
Prior 8.3:
static (inside,outside) public_ip1 web_server1
static (inside,outside) public_ip2 web_server2
8.3 or later:
object network web_server1_real
host web_server1
nat (inside,outside) static public_ip1
object network web_server2_real
host web_server2
nat (inside,outside) static public_ip2
Because Application1 will be published to the web server and the web server will be published to internet, the web server is the one to be published through ASA. I am not sure how you use Application1 and how you will publish it to the web server internally so this is out of the scope of my help.
About Application2's security, the question is, how do you want to achieve security for App2? We have several types of security. Having the ASA infront of Application2, using NAT and using ACLs, this will achieve Access Control. However, if you want to achieve data encryption between internet clients and App2, then you have to consider PKI (or certificates) to achieve this. You also can consider IPsec remote access vpn for the App2 server. It all depends on what security flavor do you like.
Regards,
AM

Flash shuts down on publish

I have flash cs3. It's worked fine for months but now when I
go to publish it shuts down. Any idea why this happens and how to
fix it?
thanks

Will it publish a brand new file with nothing in it?

Cisco show and share publishing to internet

Dear Experts
We have new deployment for Cisco SNS , and we need to publish SNS to internet . I need help to do it and any recommendations , please.
Thanks
Richard

hi
thanks again , still i have the problem . Can you check my below config ?.
1- I have already create two internal records for DMM & SNS to install licenses from DMM to SNS.
10.20.20.3 ,FQDN:test.bnp.med & SNS:10.20.20.5 ,FQDN:vod.bnp.med.
2- I have already nat the internal IP of DMM to public ip and create public record for the public ip
10.20.20.3 to X.X.X.X & test.bnp.med.ca .
3- when i tried to type vod.bnp.med.ca , i got the page cannot displayed , any advise .
thanks

Schedule time to shut down cisco IP phones

Dear All,
i would like to ask if there is any way to schedule time on CUCM 7 allowing us to shut down cisco ip phones during week ends, and which cisco ip phone models that support this feature.
regards

Hassan,
I'm no phone guy but if you want to POWER OFF the phones outside office hours there are serious implications to consider.
If your phones have PCs connected to them, there's a large chance that when the phones go off, the PCs will not be able to reach the network (because VoIP phones do not have bypass functionality).
Another thing is in an emergency, no one can make outgoing/incoming calls.
If this is what you want then you could try EnergyWise if you don't have acess to your CUCM services. Let's say you want to power off your phones at midnight and power up by 5am the next morning (weekdays):
!Globalenergywise domain security shared-secret energywise importance 60! Time Rangetime-range ONabsolute start 05:00 01 March 2013periodic weekday 5:00 to 23:59time-range OFFabsolute start 00:00 01 March 2013periodic weekday 0:0 to 5:00! Interfaceinterface GigabitEthernet0/1energywise level 10 recurrence importance 70 time-range ONenergywise level 0 recurrence importance 70 time-range OFFenergywise importance 60

Cisco CUCM 6.0 service can not start

Hi,
Last week our CUCM 6.0 server service was down, the IP phone can not register and can not used browser to access CUCM server, use ssh client to access was ok. We have tried to restart system several times, but the system still not work.
I execute "utils service list" command, it show :
admin:utils service list
Requesting service status, please wait...
System SSH [STARTED]
Cluster Manager [STOPPED] Service Not Started
Service Manager [Not Running]
Warning: Service Manager need to be running for all Call Processing Applications
Service Manager [Not Running]
Warning: Service Manager need to be running for all Call Processing Applications
Please help to advise how to recovery this system?
Best Regards,

Did you get any error message ( asking for recovery disk ) during server reboot ?
If yes, then you need to download the Recovery software for your CUCM version from CCO ( or look for the Recovery disk in your media set received with CUCM ), here it is
http://www.cisco.com/cisco/software/type.html?mdfid=282421166&catid=278875240&i=rp
Also refer the document http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080b1f305.shtml
Recovery disk should fix any issues caused due to any file corruption etc & start all the important services.
Pls rate the post if it helps.
GP.

Cisco CUCM NTP documentation/requirements

Hello all,
Just wondering about the "actual" NTP clock Stratum version requirements when
installing Cisco CUCM. As the three sources below show varying results;
So first we have the install guides;
Note
Cisco recommends that you use an external NTP server to ensure accurate system time on the first node. Ensure the external NTP server is stratum 9 or higher (meaning stratums 1-9). Subsequent nodes in the cluster will get their time from the first node.When you are installing Cisco Unity Connection on a virtual machine, you must specify an external NTP server.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_6_1/install/cmins861.html#wp804989
Then the SRND;
Unified CM automatically synchronizes the NTP time of all subscribers in the cluster to the publisher. During installation, each subscriber is automatically configured to point to an NTP server running on the publisher. The publisher considers itself to be a master server and provides time for the cluster based on its internal hardware clock unless it is configured to synchronize from an external server. Cisco highly recommends configuring the publisher to point to a Stratum-1, Stratum-2, or Stratum-3 NTP server to ensure that the cluster time is synchronized with an external time source.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/netstruc.html#wpxref14097
And finally the NTP White Paper;
For Cisco Unified CallManager Versions 5.0 and later:
– Manual configuration of the ntpd.conf file is not allowed.
– Cisco Unified CallManager prompts the administrator to specify the external NTP server at publisher installation and automatically populates the ntpd.conf file on the publisher server.
– The ntpd.conf files of all other cluster servers are automatically configured to point to the publisher as the NTP source.
• Configure the publisher to point to a traceable stratum 1 clock source.
• Configure network latency between the publisher and the dedicated clock source so that it is within 40 milliseconds round-trip time (RTT).
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps556/prod_white_paper0900aecd8037fdb5.html
Thanks for any light you can shed on this.
Cheers!
Rob
"Spend your life waiting,
for a moment that just don't come,
Well, don't waste your time waiting"
-Springsteen

Leo,
Do you have reference for this.
Still murky waters:
In 9.1 release Stratum 5 no longer enforced.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/9_1_1/CUCM_BK_RD7D4696_00_cucm-release-notes-911a/CUCM_BK_RD7D4696_00_release-notes-for-cisco-unified_chapter_0110.html
External NTP Server Requirements
The procedure "Set up first node" has been updated to remove the requirement that the external NTP server be Stratum 5 or higher. When you configure the first node, Cisco recommends configuring the publisher to point to a Stratum 1, Stratum 2, or Stratum 3 NTP server to ensure that the cluster time is synchronized with an external time source.

Dot1x, .1X and Cisco IP Phones

Hi,
We are busy performing dot1x tests on IP Phones. We chose the LSC approach and have generated CAPF CSRs which we have signed by our PKI infrastructure.
Once all certificates and trust have been uploaded and when we update the CUCM CTL with the Cisco CTL client tool, we received the following error message
“Could not get CAPF certificate(s).CAPF seems to be running on the CUCM Publisher but the certificate file(s) do not exist in the Certifiicate trust path on Server”
We searched Neptro with an explanation on this and found that article:
https://supportforums.cisco.com/thread/2067102
In our setup we one issuing CA in the certification path has n key of 4096 bits. This is imposed by our Security Policy and can’t be workaround from a security policy point of view.
We then had the CAPF CSR regenerated and had a test CA with an encryption key of only 2048 bit sign our certificate and Dot1x authentication. This worked just fine and test Ip Phones can now authenticate..
My question is, is that a known limitation of Cisco Callmanager which is unable to handle certificates signed by a PKI in which one of the CA has a key of more that 2048 bits. Or is this a bug related to our 8.6.2.23900-10 CUCM version.
Is there a way to bypass that limitation or a precise version of callmanager correcting it?
THanks,
Antoine

You can configure the MSFT supplicant to send an EAPOL-Logoff:
Software\Microsoft\EAPOL\Parameters\General\Global\AuthMode -- REG_DWORD
0: Machine authentication mode in Windows XP Client RTM. When a user logs in, if the connection has already been authenticated with Machine credentials, the users credentials are not used for authentication.
1: Machine authentication with re-authentication functionality. Whenever a user logs in, 802.1X authentication is performed using the users-credentials.
2: Machine authentication only Whenever a user logs in, it has no effect on the connection. 802.1X authentication is performed using machine credentials only.
In the wired-Ethernet case you should set (SupplicantMode = 3) AND (AuthMode = 0) AND (disable Machine-Authentication OR ensure that there are no machine credentials on the client). This will ensure that when a user logs off, an EAPOL-Logoff will be sent out. So, AFAIK, this is the bad news .. you lose machine-auth.
Actually, stay tuned for the ability for our IP Phones to be able to do this on behalf of a PC very soon. What will happen is when an IP Phone senses EAPOL through it, it will know who the supplicant is, and what port they're on (the phone's PC port). Assuming 2 conditions above, if link to phone's PC port goes down, IP Phone will transmit EAPOL-Logoff to PC immediately (on PCs behalf).
Hope this helps.

CUCME and CUCM Licensing

I would like to know how to register the licenses ordered for IP Phones to be registered and uploaded
in to CUCME and CUCM.
I searched a lot of documents but cant find out a proper answer. Could someone help me out on this issue, as I am having 2 projects, 1 with CUCME and 1 with CUCM. The customer have ordered for Licenses, but i dont know how to register it.
Please help

No, the whole process really is what I've written above. The license file is purchasesd from Cisco, but once you have that file there is no further involvement with Cisco, it's all done on the CUCM.
You license the CUCM to accept a certain number of devices, and then as you add phones to the CUCM the license totals will go down.
The licenses are in units. So say you apply a license file that contains 1000 units. If you look in the License Calculator, it will tell you how many units each type of phone would use up.
Every time you add a phone (or sometimes a feature such as Mobility) it will use up a certain number of units as shown in the Calculator, and if you ever remove that phone later (say because it needs replaced because of a fault or for a newer model), the units are returned. So for example, a Cisco 7945 IP phone takes up 4 units each, whereas a 7975 uses up 5 units each.
Once you run out of units it won't let you add any more phones until you either remove some devices to get the units back, or you apply more units.

Cisco Jabber for Windows Voicemail issue

At this I'm in processing of implementation Cisco Jabber UC solution for big Company.
I use CUCM 9.1.2, Cisco IM and Presence 9.1.2, CUC 9.1.2, Cisco Jabber for Windows 9.6.1.
I have issue in Cisco Jabber with VoiceMail Integration - when I leave voice message for any user,
than this message is arrived only him Cisco IP Phone, but not in him Cisco Jabber.
From Cisco Jabber Connectivity status in help menu I see that VoiceMail service is successfully connected
and I see VoiceMail button in Cisco Jabber.
How can I resolve this issue?

Have you configured the UC Service profile on CUCM with both Voicemail server and mailbox servers?

Jabber 9.6 no voicemail tab for CUC with CUCM 9 and CUC 8.6

Hi guys,
I have Jabber 9.2 and 9.6 clients with CUCM 9.1.2, CUC 8.5.1 and Cisco IM + P 9.1.1.
We've recently updated the CUCM and CUPS to Cisco IM+P. Also we have migrated from CUPC Clients to Jabber clients. The CUC server has remained as is. I was able to get the CUPC clients to get voicemail/visual voicemail but the Jabber client doesn't even display an ico for voicemail.
The service profile for all users is set correctly to point to the CUC server and there's no errors when I go to the jabber client "show connction status".
I haven't been able to find much about this issue. I have noticed that if I set the mail store the voicemail tab appears but we are not using a mail store as the voicemail repositary. Is this now required to check voicemail? If so can someone point me to the configuration guide? We have exchange 2012. Thanks very much!
-Akin

Hi every body,
I have some problems but not with all the users, is only working with 3 users and the rest of them don't work, I attached the errors that I get when I try to log in Telephony Accounts in the Jabber, I used the Jabber of one User, and from here I introduce my credentials (user and password) and I can get the voice mails (only from de 3 users that is woriking fine), but when I introduce the credentials of the other user I get the error and Can't get the voicemails.
The 127.23.0.7 is the IP address of the Cisco Unity Connection.
Please Help Me I'm stuck with this!

Cucm 7.1.3 cisco DB down on Publisher

Similar Messages

Maybe you are looking for