CUCM 7.x, auto registration not assign the correct auto extensions

Hello,
I have a site that that when I plug an IP phone I get an extension in the range of 2400 instead 4100 range. Any IP phone I plug in any site should be in the 4100 range don't know why only this site auto registers phones in the 2400 range. Also one phone register with an extension of 2428 but did not show up in call manager. Any suggestions why this is happening.
Thanks.
Horacio

Hi Horacio,
If you have a phone that's registered, but not in your callmanager, my first step would be to see where it is registered to. Check on the phone to see what the tftp server is. It honestly sounds like you've got the dhcp scope at that building poined at a different CUCM cluster.
hth
Rick

Similar Messages

COPA Derivation Rules are not assigning the correct values

COPA Derivation Rules are not assigning the correct values when we process billing documents in batch. We currently have derivation rules defined to take the ship to country and refer to custom tables were we identify custom geographic groups (INT/DOM and EAM, AP, etc.). The derivation rules work accurately when the billing documents are created individually, and more than 75% of them are accurate when generated in batch, but in some circumstances, it populates the derived values with the wrong field and we can not identify where or why that's happening. It looks like it may have something to do when the ship to customer number account group is different, but that's not consistent.. Does anyone know how or where these values get populated, or have any ideas why incorrect values are appearing sporadically throughout the billing run? Thanks!!!

Leigh,
Apparently the function module is changing the values for some billing docs. Check one of the following user exits, if it gets triggered and the values are changed:
COPA0001 Enhancement for derivation in Profitability Analysis (CO-PA)
Function Module: EXIT_SAPLKEDRCOPA_001
COPA0002 Enhancement for valuation in Profitability Analysis (CO-PA)
Function Module: EXIT_SAPLKEAB_001
COPA0003 Enhancement for assignment to profitability segment (CO-PA)
Function Module: EXIT_SAPLKEAK_001
COPA0005 Enhancement for actual data update (CO-PA)
Function Module: EXIT_SAPLKEII_001
Function Module: EXIT_SAPLKEII_002
Award suitable points if the above helps. You can also reach me at [email protected]
Thanks
Ajay

In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.

I have checked with ISP, there response is like below:
Those are the NNI to GBNET IPs for Dominican Republic. They are Network IPs. You should be able to ping them-that means they are working.
WANRT01#show ip route | include 192.168.20.20
B        192.168.20.200/30 [20/0] via 192.168.20.226, 02:18:29
B        192.168.20.204/30 [20/0] via 192.168.20.226, 02:18:29
Here its shows from any of our MPLS site we are able to trace the IP and it seems like, 192.168.20.204/30 is one more site but in actual its not.
INMUMWANRT01#ping 192.168.20.205
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.205, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/232/260 ms
INMUMWANRT01#trace
INMUMWANRT01#traceroute 192.168.20.205
Type escape sequence to abort.
Tracing the route to 192.168.20.205
VRF info: (vrf in name/id, vrf out name/id)
1 192.168.20.226 24 msec 24 msec 24 msec
2 192.168.20.206 [AS 8035] 232 msec 232 msec 252 msec
3 192.168.20.205 [AS 8035] 224 msec 224 msec *

HT2240 I purchased a QT Pro Reg. Code Key. When I install it in the QT Preferences Panel, I get an: "Invalid Registration" note at the bottom, next to the "Buy QuickTime Pro" button to the right. Both on a desk top and a laptop. Win 7, QT version 7.7.1. N

I purchased a QT Pro Reg. Code Key. When I install it in the QT Preferences Panel, I get an: "Invalid Registration" note at the bottom, next to the "Buy QuickTime Pro" button to the right. Both on a desk top and a laptop. Win 7, QT version 7.7.1. No joy! I've been on the phone with Apple for a little more than an hour, so far. They have my money. anyone have any Ideas? Just kiss the thirty bucks goodbye?

You,Sir, are "The Man"! I followed the instructions and - viola - Joy in Mudville. Thank you, keep up the great work. Even the "Apple" people don't seem to know this. I was on the phone with them, passed from one to another, for over an hour. While waiting I stumbled on your advise and I was made free! If they ask you, charge them a mint for the information. You Sir have gone where no Apple has gone before.

'You Are Not Using The Correct Type of Phone Cord' Error

Having a issue with my fax on my HP Officejet Pro 8500 wireless. Tried to send a fax, it received a send error. I ran fax test and it came back with "You are not using the correct type of phone cord". Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok. Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone. I use a dedicated phone # and the Officejet is set to auto answer. I can call out and receive calls on the phone connect to the Officejet. My assumption is that since I can use the phone without issue there is nothing wrong with the phone line. Any ideas?
This question was solved.
View Solution.

I was having the same problem. I'm using a the 2 wire phone cord provided with the printer and still getting this error. Turns out that it related to have a phone extension plugged into the printer. If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes. I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error.
Run the test without a telephone plugged into the printer's extension jack and you should be fine.
Worked for me!

"You do not have the correct role to perform this function" on New Site

I have created a new site where I added fwadmin to all roles. When I login to Admin for this site I get the "You do not have the correct role to perform this function" error. I've read the manual and retired adding the user to all roles. I also looked at the Asset Types and I get "Error in evaluation;Error in configuration" when trying to enable.
Please point me to where I am going wrong, or where in the manual (and which manual) I can find help.
Regards,
John

Hi John -
When you're provisioning users for sites, you have to
1) enable the app for your site
2) specify the roles that pertain to your app
3) assign a user to the site
4) assign a user roles for the site
If you miss any one of these, you can get this error. When you see "Error in Evaluation; Error in Configuration", however, especially during the out-of-the-box apps, please report a bug to support. That message is basically the XML scripting language equivalent of an uncaught exception, and it should not happen in the UI.
Regards,
Tony

I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphon

I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphone 5. I can get connected to other wifi on these features but not with my jetpack. Please help, I need to use this feature soon. Thank you so much

Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect.

I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put

I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put for my ipod touch and itunes?

Try these previous discusssions:
recover answers to security questions: Apple Support Communities
how do i change apple ID security...: Apple Support Communities

The world clock on my IPOD touch is not telling the correct time

My IPOD touch world clock is not displaying the correct time and the edit feature is not working to change the time

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

My ipod is not playing the correct order of my songs in playlists

my ipod is not playing the correct order of my song order in my playlists. it plays random order of playlist songs

You may have tapped the Shuffle button (looks like two arrows crossing path) in Blue. Tap it once again to turn it off.

TS1702 The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, they post exactly 4 hours earlier than the correct time on my Yahoo Calendar. Does anyone have a "fix" to correct the "time

The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, items post exactly 4 hours earlier than the correct time on my Yahoo Calendar. My i4S is in the correct New York time zone. Help?

I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work. So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.

My wife's iTunes ID will no longer work. Tried to reset password but did not get email, tried to reset by answering personal questions' but will not accept the correct date of birth. Has it been hacked? How can I fix this?

My wife's iTunes used ID will not work. Tried resetting the password, but email was not received. Tried using personal questions method, but would not accept the correct date of birth, so could not go any further. Has her iTunes ID been hacked? How can I fix this?

Thanks for that advice @randers4.
I linked through and submitted my info as a "topic not covered" in the iCloud section. After entering the serial number of my MBP it turns out I wasn't eligible for technical support (though I don't think this is hardware related support) and the final suggestion was to take my computer into an Apple store. I called my local Apple reseller and asked for assistance. The customer service rep was very nice but unable to help, so suggested I call Apple Support on 1300 321 456. I did so and, again, spoke to two very polite and helpful customer service people (I was transferred to security services). I didn't have to be on hold to speak to either rep for more than a few seconds! After trying a few different things, he worked out what was happening...
So, to cut a long story short, to solve the problem in my OP, all I had to do was log out of iCloud in my System Preferences and log back in using my current Apple ID. [Edited to add that I had to sign out of everything I was currently signed in to with my Apple ID before logging out and in again.]
Problem solved!
Message was edited by: NotBaconBits

TABLE(CAST()) function not returning the correct results in few scenarios.

I am using TABLE(CAST()) operation in PL/SQL and it is returning me no data.
Here is what I have done:
1.     Created Record type
CREATE OR REPLACE TYPE target_rec AS OBJECT
target__id          NUMBER(10),
target_entity_id NUMBER(10),
dd           CHAR(3),
fd           CHAR(3),
code      NUMBER(10),
target_pct      NUMBER,
template_nm VARCHAR2(50),
p_symbol      VARCHAR2(10),
pm_init          VARCHAR2(3),
target_name     VARCHAR2(20),
targe_type     VARCHAR2(30),
target_caption     VARCHAR2(30),
sort_order      NUMBER (4)
2.     Created Table type
CREATE OR REPLACE TYPE target_arr AS TABLE OF target_rec
3.     Created Stored procedure which accepts parameter of type target_arr and runs the Table(Cast()) function on it.
     Following is the simplified form of my procedure.
     PROCEDURE get_target_weights
     p_in_template_target IN target_arr,
     p_out_count          OUT NUMBER,
     IS
     BEGIN
          SELECT count(*) into p_out_count
     FROM TABLE(CAST(p_in_template_target AS                     target_arr)) arr;
     END;
I am calling get_target_weights from my java code and passing p_in_template_target with 10140 records.
Scenario 1: If target_pct in the last record is 0, p_out_count returned from the procedure is 0.
Scenario 2: If target_pct in the last record is any other value(say 0.01), p_out_count returned from the procedure is 10140.
Please help me understand why the Table(Cast()) is not returning the correct results in Scenario 1. Also adding or deleting any record from the test data returns the correct results (i.e. if keep target_pct in the last record as 0 but add or delete any record).
Let me know how can I attach the test data I am using to help you debugging as I don’t see any Attach file button on Post Message screen on the forum.

I am not able to reproduce this problem with a small data set. I can only reproduce with the data having 10140 records.
I am not sure if this is the memory issue as adding a new record also solves the problem.
This should not be the error because of wrong way of filling the records in java as for testing purpose I just saved the records which I am sending from java in a table. I updated the stored procedure as well to read the data from the table and then perform TABLE(CAST()) operation. I am still getting 0 as the output for scenario 1 mentioned in my last mail.
Here is what I have updated:
1.     Created the table target_table
CREATE Table target_table
target_id          NUMBER(10),
target_entity_id NUMBER(10),
dd           CHAR(3),
fd           CHAR(3),
code      NUMBER(10),
target_pct      NUMBER,
template_nm VARCHAR2(50),
p_symbol      VARCHAR2(10),
pm_init          VARCHAR2(3),
target_name     VARCHAR2(20),
target_type     VARCHAR2(30),
target_caption     VARCHAR2(30),
sort_order      NUMBER (4)
2.     Inserted data into the table : The script has around 10140 rows. Pls let me know how can I send it to you
3.     Updated procedure to read data from table and stored into variable of type target_arr. Run Table(cast()) operation on target_arr and get the count
PROCEDURE test_target_weights
IS
     v_target_rec target_table%ROWTYPE;
     CURSOR wt_cursor IS
     Select * from target_table;
     v_count NUMBER := 1;
     v_target_arr cws_target_arr:= target_arr ();
     v_target_arr_rec target_rec;
     v_rec_count NUMBER;
     BEGIN
     OPEN wt_cursor;
     loop
          fetch wt_cursor into v_target_rec; -- fetch data from table into local           record.
          exit when wt_cursor%notfound;
          --move data into target_arr
          v_target_arr_rec :=                     cws_curr_pair_entity_wt_rec(v_target_rec target_id,v_target_rec. target_entity_id,
                    v_target_rec.dd,v_target_rec.fd,v_target_rec.code,v_target_rec.target_pct,
     v_target_rec.template_nm,v_target_rec.p_symbol,v_target_rec.pm_init,v_target_rec.template_name,
     v_target_rec.template_type,v_target_rec.template_caption,v_target_rec.sort_order);
          v_target_arr.extend();
          v_target_arr(v_count) := v_target_arr_rec;
          v_count := v_count + 1;
     end loop;
     close wt_cursor;
     -- run table cast on target_arr
     SELECT count(*) into v_rec_count
     FROM TABLE(CAST(v_target_arr AS target_arr)) arr;
     DBMS_OUTPUT.enable;
     DBMS_OUTPUT.PUT_LINE('p_out_count ' || v_rec_count);
     DBMS_OUTPUT.PUT_LINE('v_count ' || v_count);
END;
Output is
p_out_count 0
v_count 10140
Expected output
p_out_count 10140
v_count 10140

I do not have the correct version of the flash player, but when I follow the steps to download it, it still doesn't work in Firefox. (It does work in Internet Explorer)

Every time I click on a video icon, the response I get is that I cannot play the clip because I do not have the correct flashplayer. However, when I click to download it, nothing changes. I even tried disabling my security setting but it still did not work. Unfortunately, the troubleshooting help was too complicated for me to figure out. Is there something basic I can do to make firefox work? It does work on Internet explorer, so obviously the correct program is in my computer - it just won't work on firefox.

IE uses a different version of Flash than other browsers use.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del = Processes tab}
3. Then run the Flash setup file from your Desktop.

I have a 2011 mini with usb connector when I attempt to connect my nano I get the message that I do not have the correct adapter cable. I got the correct adapter cable from the Mini dealer. Any suggestions?

I cannot get my Mini Cooper to sync up with my nano thru the USB port. When I hook up with the cable that came with the Nano, it acknowledges that it is an Ipod however it displays the message that I do not have the correct cable. When I use the audtio adapter cable from BMW it doesn't see the Nano at all. Has anyone else had the issue and what did you do to over come it I tried my nano in another persons car (a Ford) and it worked with no issue.

This can sometimes be the result of a faulty/damaaged USB sync cable. Do you have another cable you could test it out with?
B-rock

CUCM 7.x, auto registration not assign the correct auto extensions

Similar Messages

Maybe you are looking for