CUCM 8.6.1.2000 - Call History not logging, and no ring tone access.

Hello,
A little background:
Recently, I setup a UCS C-210 M2 with CUCM 8.6.1 and restored our Pub and Sub to it. Also migrated to from physical Unity to Virtual CUC, same with Presence.
I've also setup a 2nd CUCM Sub, as well as new CUC and CUP subs on a second UCS C210. I also upgraded CUP to 8.6.4. before adding the Sub CUP node.
I'm thinking my problems began when I added the 2nd Subscriber CUCM node on our 2nd C210. Here is a description of what's going on.
- I cannot change ring tones on an IP phone. I get "Ring List Unavailable" when I try to change a ring tone. I noticed that my phone had changed over to the CTU ring tone around the time I brought up the VM environment. The CTU ring tone was a custom one I had loaded at one time.
- I cannot access any call history on my IP phone. My Jabber client logs call history just fine.
Seems to be a TFTP issue, but I restarted the Cisco TFTP service yesterday, and it did not help. I also reset the Device Pool, which didn't seem to do anything.
Also, I'm still a bit unclear on which services I should be running on my new Subscriber node.
Any help is very much appreciated. Thanks again, guys!!
-Jonathan

I had this issue and resolved it. The problem was that we had changed DHCP servers over to a different platform and the new DHCP server didn't have Option 66 defined to point the phones to a TFTP server. Once we re-specified the TFTP server IP's for option 66 in DHCP and reboot the phones the issue was resolved.

Similar Messages

In Lync, if a call is not answered, and does not go to voice mail, is anything recorded in the Lync database ?

We are using Lync 2010. This question relates to the LCSCDR database.
In Lync, if a call is not answered, and does not go to voice mail, is anything recorded in the Lync database ? Are there any options to make Lync store a record of unanswered calls ?
Is there a way to tell from the LYnc database if a call was answered by a person or went to voice mail ?
I cannot see anything in the sessiondetails table to indicate any of the above.
Any help much appreciated.

Hello,
You shouldn't install Shockwave Player unless you know for a fact that you need it.
# From the following page, save the uninstaller, the full installer for Netscape, and the full installer for Internet Explorer if you also need it in that browser.
#* http://www.adobe.com/shockwave/download/alternates/#sp
# Exit all applications.
# Run the uninstaller.
# Restart your computer.
# Run the installer for Netscape.
# Run the installer for Internet Explorer if you downloaded it.
This forum doesn't support BBCode like <nowiki>[IMG]</nowiki> tags. You can simply post the plain links to the images. In replies to the thread, you have the option to attach images to your post.
* https://support.mozilla.org/kb/markup-chart

Can any person tell me in very very very simplitic way how to use one of the downloaded tunes as a ring tone? The one I wanted to use does not come as a ring tone but I want to use it as a person ringing tune.

Please can any one tell me how to use a downloaded tune as a ring tone as, I want to use one that is not available as a ring tone. I would like to use it as a person ringing ID tone. Please can you tell me in very very simplitic way with an idiots guide for a two year old as I am not good with difficult intructions. Thanks for any help .

Google will find several free ways to create ringtones.
I am sure you can find instructions that you can understand.

Droid Turbo missing calls, delivering texts late, not capturing call history, not updating e-mails

My wife got the Droid Turbo Ballistic Nylon just before Christmas as a replacement for her iPhone. She has been complaining that she is not getting calls, e-mails, text messages, voice mail messages. Last night, my son called her twice from California and there was no answer. Checking her phone there is no voice mail from him and her call history shows no attempts. I re-booted the phone and she suddenly got a flood of e-mails, call history, texts messages. She uses this for business and this is negatively impacting her buisness.
This morning I did a test. I forwarded an e-mail from her phone to me and then I replied to that e-mail, which is set up as IMAP on all devices. I could see my reply on her PC but nothing her phone minutes later. This test is being done in my home with all devices on the same Wi-Fi network. I re-booted the phone into Safe Mode and the e-mail came through. I don't know if it was just the additional length of time or putting it into Safe Mode. Based on the number of issues with multiple applications (she also says she is losing contact information) I am beginning to think that this is a hardware or OS problem. Anybody have any ideas?

I know that IMAP is sometimes set to auto-sync only every 15 min or more, according to default or user set amount of time. When you rebooted, the phone auto-synced with the email server. As far as missed calls and those not showing in logs, I'm not sure. I can say this though, I was missing calls and voicemails and came to find out that the Advanced Calling HD Voice VoLTE updates had negatively impacted my phone's service. I have since disabled and service is better. Perhaps the Turbo also has HD calling enabled and is experiencing similar issues because of that.

I have purchased actual ring tones, not songs or MP3s, RING TONES. They used to be on my Iphone but when I got a new laptop and downloaded new ITunes, they are showing up in Itunes in RINGTONES, but will not transfer to my iphone. They are checked. Help?

I have purchased actual ringtones from the ITunes store. They were working fine on my Iphone 3 before, but I got a new laptop and the new version of ITunes, and now even though they are listed as ring tones on my ITunes, they will not transfer to my Iphone. (Please do not tell me they are songs and not ring tones, they are definitely RING TONES!) Can anyone help me with this? Thanks.

Use the Transfer Purchases command in the File menu of iTunes.
(60931)

My phone has just up graded the new updates and the ring tone i purchased from itune will not go back on my phone any help please

my iphone has just updated the lastest upgrade and i have lost my purchased ring tones they are still in my itunes but will not sync with my phone any help please

I also have this problem.
I downloaded all my purchased items from my phone to itunes.
I then upgraded my phone to the latest ios.
The ring tone appears in itunes and is showing on my phone when selected in itunes under devices BUT I cant find it anywhere on the iphone 4.
My son got an ipod for Christmas and it shows up on his!?
Anyone able to help with how I find the tone on my phone?

CAN NOT log and capture final cut pro

I have written 3 weeks ago... I NEED HELP...
I have Mac G5, Mac os X, 10.4.11 dual 2 ghz power 2 gb ddr sdram
I have external lacies plugged in, have NEVER had a problem log and capturing
until the most recent update with quick time...
Im very upset and need this resolved asap... please help...
I have repaired disks, gone to library / receipts, re downloaded quicktime 7 still nothing
when I try to log and capture, I see my dv playing as soon as I click on capture now
it stops and says... FILE ERROR: UNKNOWN FILE..
PLEASE PLEASE HELP.. too many jobs are due
thanks
Cindy Lambrakis

Rebuilding your startup disk involves erasing it and then reinstalling your software from scratch. If you've not done this in a while, I'd suggest you do it. Back it up first, then go for it.
In the mean time, you might try resetting your PMU button on your mac's motherboard. It's underneath the fan you can remove to install RAM. Unplug your Mac from power completely, then open it, remove the fan, and press the little round button there labled PMU. I've seen this fix up firewire problems.
Jerry

FCE4 will not log and capture long clips.

FCE4 will not capture clips 3 min. or longer from a Canon HF100. It just gives an error mark at the end of the process with no explanation. The capture process freezes on long clips with the Canon HV 30. I can capture short clips with both but nothing over 3 min. Help is greatly appreciated. Thanks

Yes, I use the log and transfer for the HF100 AVCHD. I have transfered and edited several 1-2 min. clips but I am trying to transfer a 9 min. clip and at the end of the transfer process FCE4 displays a error mark next to the clip with no explanation as to why there was an error in the transfer. I use the capture mode for the HV30 and I have also captured and edited 1-2 min. clips but the 9 min. clip freezes after a few minutes of capturing. I am using a Western Digital external drive with USB connection for the scratch disc. I have no problems with short clips just the 9 min. one. Any ideas. Thanks

Does not log and transfer

Hi,
I'm using MacBook Pro, FCE, Canon HF10 and a QWC external as scratch disk. When I select video clips under Log and Transfer and add them to queue, there is a red exclamation mark under "status" and I cannot transfer them. I deleted the FCE preferences and cache, which did not solve my problem. Any suggestions?
Thanks

I spotted another comment on the forum with regards to transfer and log where the user was having a problem. They commented that they worked around the issue by selecting the clip in transfer and log and then set the In and Out times on the preview to the right and then selected the Add Clip to Queue.
I just tried this on all the video that would not transfer and it worked. By cutting down each video to segments of 5 mins I was able to transfer all the video from my HG10.
Hope that helps.

Windows 2008- Account Lock not working and getting Domain Policy access denied

Hi
Windows 2008 Root Domain we tried to Edit the policy and we were getting the error "Access Denied on the Domain Policy template" we resolved by giving Write permission for authenticated user on the Template. later we applied account lock out policy.
but it is not applying and automatically reset to 0 in account lockout tool.
Error:"Access Denied:\\sysvol\Domain.com\policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Windows NT\SecEdit\GPTmpl.inf.Make sure that you have the right permission to this object.

Hi,
The error message is Access Denied, so it should be a permission issue.
You mentioned that you tested the account lockout in isolated network, it was working fine without any problem, by which did you mean that you didn’t get the Access Denied error message, or account wasn’t lockout out?
If you are facing account lockout problem, here are some troubleshooting articles below for you:
Troubleshooting Account Lockout
http://technet.microsoft.com/en-us/library/cc773155(v=WS.10).aspx
Troubleshooting account lockout the PSS way
http://blogs.technet.com/b/instan/archive/2009/09/01/troubleshooting-account-lockout-the-pss-way.aspx
Appendix Two: Gathering Information to Troubleshoot Account Lockout Issues
http://technet.microsoft.com/en-us/library/cc778156(v=WS.10).aspx
Best Regards,
Amy

Is there any valid reason why Wifi calling is not enabled and we have to wait until mid 2015?

It seems like it shouldn't have anything to do with the carrier since its completely off their network. It is a feature and function of the device. I've been living in a dead zone for over a year and was excited to hear Wifi calling was coming with the iOS 8 update. After updating today I found out that Verizon has no plans to enable a feature that Apple has made available now until mid 2015. According to the CFO Fran Shammo, "We built our voice platform so extensively [that] there was never a need for us to tell our customers, 'Oh, our network is not good enough so you need to go on Wi-Fi to complete your call." I know I'm not alone here in an area not covered by Verizon and as tempting as it is to buy their $250 network extender I'd much rather use a FREE alternative that is available NOW and has NO BEARING ON VERIZON'S SPOTTY NETWORK that I have the misfortune of living in.

Tidbits wrote:
Would love to have every carrier offer coverage everywhere. Verizon may be the best nationwide, but they don't cover everywhere. When I travel WiFi calling works great in places with little to no coverage no matter what carrier I was using. I end up using my T-Mobile lines when I travel to those locations.
I find places that don't have Verizon coverage tend to be the same areas that don't have broadband internet which renders wi-fi calling moot. Yes there are areas in my county that have poor or no service. As I aid these places do not have broadband internet either. So what good is wi-fi calling to them?
As far as T-Mobile I'd have to drive 70 miles just to get to a 4G area and over 40 miles to even get to an area that provides T-Mobile edge. Now if I'm using wi-fi for both calling and data then what am I paying T-Mobile for?

I updated my iPhone 5 to iOS 8, and my I can't see any of my call history at all, and the recents displays a really large number. Any way to resolve this?

This is is what my call log looks like and it won't display any calls at all.

First I would try to hold down the power and the home button for about 15sec, but at least as long as the iPhone restarts, if it is still stuck or still in recovery mode then I can suggest you the tool "Wondershare Dr. Fone for iOS", it is both a Windows and Mac tool and I just used it today to get my iPad out of the Recovery mode.
Tell me if any of these options worked for you.

E-mail not outgoing, and intermitely E-Mail access

Greetings Apple Discussions:
I have my OSX firewall off, Verizon DSL westell 2200 modem, and a Linksys wired router-that has a firewall. A few days ago I reconfigured the router through an IBM laptop with NetSet software from Linksys.
Regular internet pages open fast. I may be able to log on to Yahoo.com mail, etc. and once I read a message I can no longer get access to my InBox. This also happens when I try to submit forms for services, etc.
When I try to send an email, this is the message I get:
Cannot send message using the server
outgoing.verizon.net
The server response was: 4.4.2 Timeout while waiting for command.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
Message from: Aubrey Muhammad <[email protected]>
Then when I try it again I get this message:
This message could not be delivered and will remain in your Outbox until it can be delivered.
The sender address [email protected] was rejected by the server.
I would appreciate if any one would help me with this issue.
Aubrey

Corrective Measures taken after advice from admins.

Bookmark button not working and spinning ball when accessing Japanese sites

I started getting this problem since I updated to 10.5.2. I even removed all the bookmarks and still Safari won't let me access my bookmarks (spinning ball). I also cannot access many of Japanese urls where Firefox can -- it would start to load the page and half way through I get the spinning ball. I tried repairing permission, trashing cache. I'm not sure what else I can do. Can someone help?
Thank you!

Problem solved! The cause was Linotype FontExplorer X v. 1.2.2 which launched at startup. Update to 1.2.3 fixed my Safari problem.

HT4914 What do you do if you can not log into a computer to access your account? I have 4000+ songs/videos they are backed up on an external hard drive due to a computer that was ready to die, backed all up, new net book doesn't support iTunes? Help!

Can anyone answer the above question?

Not sure what your question is. If you want to sync them to your iPad then you will need to use a computer, you won't be able to connect an external drive to it - there are some wifi-enabled drives that allow you to stream music and videos to an iPad (so you could potentially use your netbook to copy them over to one), but if you want to store them on the iPad then you will need a computer that can run iTunes.
If they are iTunes purchases then you might be able to re-download some of them directly on the iPad via the Purchased tab in the iTunes store app.

CUCM 8.6.1.2000 - Call History not logging, and no ring tone access.

Similar Messages

Maybe you are looking for