CUCM 8.6.2.20000 Pub & Sub DRF Local never starts when servers started

Anyone ever seen this? I'm running CUCM 8.6.2.20000 in my lab on Esxi5 VM's. Every time I gracefully shutdown the Pub and Sub, and turn them back on (this is a lab, hence the multiple on/offs) both Pub and Sub DRF local services never start. Never. DRF master starts, but not the two locals. I have to manually start them each and every time. Once they are started, no problems.

Hi,
Can you check whether you have any expired CAPF certificates in CUCM OS Admin page --> Security -- > Certificate management. If you do have you can delete the expired certs after confirming that there are valid certs available on the same page. Restart CAPF service after that.
We could also find the exact cause from the DRF local logs
Thanks,
Shenbagarajan

Similar Messages

CUCM 9.1.2 SUB DRF LOCAL IS DOWN

Hello,
I am having a problem backup my cluster .
When enter the disaster recovery system everything is slow (most of the time )
Some times I get this message
"Unable to process request, master agent is busy"
In addition the service DRF local in the sub is "down"
after restart the service is up only for few minutes .
I found this post
https://supportforums.cisco.com/discussion/12070896/drf-local-service-stops-subscriber
but I am no sure this is same problem and didn't understand completely.
Any ideas ?
Thank you ,

Current time in UTC is : Wed May 21 10:14:55 UTC 2014
Current time in Asia/Jerusalem is : Wed May 21 13:14:55 IDT 2014
admin:utils ntp status
ntpd (pid 6235) is running...
     remote           refid      st t when poll reach   delay   offset jitter
==============================================================================
*10.100.99.254   LOCAL(1)         8 u    6   64   37    0.814    5.778   0.799
10.100.10.16    10.100.10.15     4 u   56   64   37    0.475 141274.   6.427
10.100.10.15    212.199.182.150 3 u   28   64   37    0.625 141268.   6.839
synchronised to NTP server (10.100.99.254) at stratum 9
   time correct to within 946 ms
   polling server every 64 s
ok now the clock is synchronised
I still get the message Local Agent is not responding

Cisco call manager pub & sub definitions

I'm just beginning to learn Cisco VOIP. Can someone explain to me in a simple way what SUB & PUB mean in relation to Cisco Unity & call manager mean, and how it's used in the real world. My supervisor wants me to do a unity & UCM backup, and I'm not really sure what I'm doing
Thank You very much.

PUB = Publisher
SUB = Subscriber.
In simple terms, think of the Publisher as the manager of the CUCM cluster. Configuration changes are typically done on the Publisher, and it distributes those changes to the Subscribers. Subscribers perform call processing, phone registration, software conference bridge, music on hold, etc., and in some setups the Publisher will as well (depends on size and design, as Jaime mentioned).
The Pub-Sub relation for Unity is a little different... which one handles voicemail traffic depends completely on how the connectivity with CUCM is configured. In some setups, they will be distributed voicemail traffic evenly, while in other setups the Pub may get all traffic until its ports are full, and then overflow to the Sub as a backup.

Pub/Sub Upgrade question

I'm in the process of upgrading a 4.x CUCM Pub/Sub to 8.5.
The new hardware I have doesn't support anything below 8.5 so I used a "swing server" for the DMA export/import, etc.
To upgrade the swing server I used an upgrade ISO I had previously downloaded to 8.5.1.13900-5.
Then, I installed 8.5 from disk, upgraded it to 8.5.1.13900-5 and did a backup on the swing server and a restore on the new server.
So far, everything is fine and dandy.
Now, for the sub...
At first it wouldn't install because the disk version of CUCM I have isn't the same as the active one. So I rebooted the Pub into the inactive (downgraded) partion and then I got the sub to install since it recogized that the Pub was on the same version.
So now I need to get these both on the 8.5.1.13900-5 where the data import is located. I tried upgrading the sub first (to the inactive partion) figuring once that is done I'll just reboot the Pub into the correct version and then the Sub.
However, the Sub failed twice on the upgrade with an error saying it failed reading from the source file. So, I rebooted the Pub into the correct version and I'm trying again to upgrade the Sub. Hopefully this will work.
So, where did I go wrong and what should I do differently?
All criticism accepted!
Thanks!

The upgrade failed again and I noticed that all the services on the Sub were deactivated and they would not start due to a database error.
I then rebooted the Pub into the inactive partition which is the downgraded version matching the current Sub version. This allowed me to activate the services on the Sub.
Then, I ran the upgrade on the Sub and it seemed to take. I then rebooted the Pub into the correct (upgraded) version. I went to switch versions on the Sub but it only show the active version being the lower (incorrect) version. I rebooted anyway thinking it may boot into the upgraded version but it didn't.
When both servers came up, the Pub into the correct (upgraded) version and the Sub into the wrong version I checked the services on the Sub and they're activated and running. I'm trying to run the upgrade again and I selected to reboot into the inactive partition automatically this time.
Thoughts? I feel like I'm chasing my tail...

CUCMv8 install pub sub validation error

I am doing a fresh install of a CUCM pub sub. The version is 8. Cisco sent a DVD with 8.0.1 version of CUCM installation software. The cisco servers probably had a pre loaded installation software with version 8.0.2. Somehow after I started installing the Pub, it installed the 8.0.2.40000-1 version, totally ignoring the 8.0.1.10000-26 on the DVD. Once I finished with the Pub and started installing the Sub, after the first node access configuration there was an error which said the version on Pub does not match the one on Sub. I guess the DVD erased the partition on the Sub which had the 8.0.2.40000-1 on it and went ahead with installing 8.0.1.10000-26
How do I rectify this? Should I reinstall the Pub with 8.0.1.10000-26 and follow suit on the Sub? Or should I download 8.0.2.40000-1 from the Cisco support and try installing 8.0.2 on the Sub? My question is since the Sub is a blank server with nothing on it, how would I be able to tftp into it from the Pub's CLI and push the 8.0.2 iso? Cisco does not upload bootable iso files and at the same time does not recommend converting non bootable to bootable files. Hence the solution of downloading non bootable 8.0.2 iso files and converting into a bootable DVD and installing is out of question.
Cisco rep suggested I install 8.0.3. Can I just download 8.0.3, burn a DVD (he said its bootable file) and pop it into the server and commence installation?
Thanks, appreciate your help.

Hi
Basically the download images from Cisco are not bootable (primarily to make life difficult for engineers, but also to discourage piracy I suspect). This leaves you two main choices:
1) Yes, you can boot the publisher from 8.0.1 media you have, install 8.0.1, and then continue your subscriber build. If you like you can then download any 8.0(x) image from Cisco and upgrade using the normal documented procedures.
2) Alternatively, if your sub is running 8.0.1, partway through the install it will say 'do you wish to install a patch as part of this installation'... if you pick yes, you can then point the server at a downloaded version (e.g. the same version as your pub is running) and it will apply that version. You would be using your existing media to boot the server, and then applying the latest downloaded version.
If you intend to go to 8.0.3 you may just upgrade your pub, and then do step two above on your sub (boot from your media, and then apply an 8.0.3 download). You can apply the downlaoded file from an SFTP server or from a burned DVD.
Regards
Aaron
Please rate helpful posts...

Please advise regarding implementing pub/sub in a BPEL process.

Hi guys,
Requirement
The customer information comes as HTTP/SOAP message and is sent to the BPEL process as input. BPEL uses ESB and database adapters to create the customer in Oracle apps. Now, we need to send the same customer information with the Oracle apps customer number to some other systems. The number of systems is not know at this time, so we need a pub/sub mechanism where we can publish the customer creation event with the required parameters (customer name, number, etc.). Then we just create subscriptions to that event as an when required. This gives us the flexibility to add subscriptions withougt changing the initial BPEL process.
My questions
I can think of three ways to do this, please advise.
1. Use Oracle workflow business events and subscriptions. At the end of the BPEL process, raise the wf event and the subscriptions to that will be processed by workflow engine. My doubt here is that most of the times the subscriptions is another BPEL process, so does it make sense to go from BPEL to WF and then WF to PL/SQL to invoke a new BPEL?
2. Use Advanced Queues (Oracle AQ). This is similar to using Oracle WF and to me the issues are also the same.
3. Use routing rules in ESB -- I am not really sure if this can be done to replicate a pub/sub scenario, please advise and elaborate.
As a summary, we want the ability to have pub/sub within BPEL and/or ESB. Any other suggestions are also welcome.
Thanks!

I have the same question , but could not find the releveant post in ESB forum.. is the response posted ? pls post the link to that thread...

How to Create web service using JMS with PUB/SUB pattern.

Hi All,
I need to expose web service using JMS with PUB/SUB pattern.
if you have any source for this.
I tried to use @WLJmsTransport annotation but unable to get it done.
I have configured all JMS server, topic, and connection factory.
Thanks.

Hi, I am having web sample web service program which is simple one.
But I need to Modify this to JMS enable.
Can any one help me?
Thanks.

Looking for sample code to create my own pub/sub!

I am a new bee in JMS. So I would really appreciate if
some one could give me some hint to start up with my school project. I am looking for a sample Java code that will:
For the Publisher:
1. Connect to a broker [create it, if it does not exist]
2. Create a publisher/destination.
3. Create a pub-sub queue
4. Publish a message
5. Ack or Nak depending on if the subscriber got or did not get the message.
For the Subscriber:
1. Connect to a broker [create it, if it does not exist]
2. Subscribe to the broker
3. Subscribe to the Queue
4. Show an received messages on the console.
Here are the command line params for both the Publisher and subscriber:
runPub 127.0.0.1:7676 myTestBroker myQueue "this is my message"
runSub 127.0.0.1:7676 myTestBroker myQueue
Please tell me if there are similar java code that will do all this and work with ANY JMS compatible client. i.e. I should not have to use the Admin tool of any JMS Server (MQSeries, iPlanet, SonicMQ etc etc). The code should follow the JMS spec and do this programmatically.
Thank you very very much in advance for doing this great favor.
With regards,
Amir.

Thanks a lot for that hint. I think that's a great tutorial for a beginner. I could compile those sample codes from chapter 4 with out any problem, but could not run it. I also installed j2sdkee1.3.1 and updated my classpath according to the spec. But when I tried to run the "j2ee -verbose" command it was giving me the following error message:
ERROR: Set J2EE_HOME before running this script.
Any advise for me that I should follow next. Thanks again.

Need to use JMS in Web service for PUB/SUB pattern

Hi All,
I have JMS configured in my Web logic server 10.3.4.
I have stand alone program for JMS in PUB/SUB pattern.
I have Web service application with Apache CXF framework.
Now, the problem I need to integrate JMS in my web service application for new web service with PUB/SUB pattern.
Can any one guide me to this.
I am trying to use @WLJmsTransport annotation provided by Weblogic. Is this approach is correct?
And It is giving error during deployment that weblogic.jws.WLJmsTransport is not allowed as it is a JAX-WS type web service.
I think It is creating problem with annotation parameters.
I am using annotation like @WLJmsTransport(contextPath="transports", serviceUri="JMSTransport", queue="Queue", portName="JMSTransportServicePort")
and ConnectionFactory with name ConnectionFactory and JNDI jms/ConnectionFactory, Queue with name Queue and JNDI jms/Queue, Topic with name Topic and JNDI jms/Topic.
Thanks
Thanks in advance.
Edited by: HBM on 21 Apr, 2011 1:42 AM

Use this link.
http://webloic-wonders.com/weblogic/2011/04/30/jms-based-webservice-on-weblogic-server/
Thanks.
Harshal

MQJMS2005 - IBM wsad/mq pub/sub sample

Has anyone had problems running the IBM pub-sub sample for wsad and wq.
http://www-106.ibm.com/developerworks/ibm/library/i-jms2/
I am running MQ5.3 and WIN2000.
The P2P example works fine, getting the folowing error when trying to test client access:
Exception: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'localhost:QM1'
Any help will be greatly appreciated.

I am having the exact problem. I have MQ5.3/WSAD5.0/WIN2000. Try putting the directory where mqji.properties has
to be in the operating system CLASSPATH environment variable, or you will get the error message you indicated. This was suggested by Willy Farrell himself. I am stil running into issues :) But try and see if this works for you.

Problem publishing using pub-sub adapter

Hi,
I want to see events from my EPN in the Visualizer. For that I created an adapter that connects to a channel in side the EPN. It is a httppub adapter.
When I am trying to start it for publishing from the visualizer I get in the Eclipse (I run the CEP from the Eclipse):
<18:20:23 IST 08/12/2011> <Error> <EventInspector> <BEA-2060506> <Stage adapter cannot be configured for event tracing because it is not an event source. The stage must implement StreamSource or EventSource to be an event source.>
Isn't the adapter "automatically" publish the event? Do I need to create a bean for that?
Below the adapter config and my EPN file:
Adapter config:
<?xml version="1.0" encoding="UTF-8"?>
<wlevs:config xmlns:wlevs="http://www.bea.com/ns/wlevs/config/application">
<http-pub-sub-adapter>
<name>adapter</name>
<server-context-path>/pubsub</server-context-path>
<channel>/InputChannel</channel>
<user>wlevs</user>
<password>welcome1</password>
</http-pub-sub-adapter>
</wlevs:config>
EPN file:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xmlns:ha="http://www.oracle.com/ns/cep/config/cluster"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
     <wlevs:event-type-repository>
          <wlevs:event-type type-name="StringEvent">
               <wlevs:class>com.oracle.cep.training.events.StringEvent</wlevs:class>
          </wlevs:event-type>
     </wlevs:event-type-repository>
     
     <wlevs:adapter id="JMSInboundEventsAdapter" provider="jms-inbound">
          <wlevs:listener ref="HaInputAdapter"/>
          <wlevs:instance-property name="converterBean" ref="CSVInboundMessageConverter"/>
          
     </wlevs:adapter>
     <bean id="CSVInboundMessageConverter" class="com.oracle.cep.training.converter.CSVInboundMessageConverter"> </bean>
     
     <wlevs:adapter id="HaInputAdapter" provider="ha-inbound" >
          
          <wlevs:instance-property name="keyProperties" value="messageText"/>
          <wlevs:instance-property name="timeProperty" value="arrivalTime"/>
     </wlevs:adapter>
     <wlevs:channel id="InputChannel" event-type="StringEvent">
          <wlevs:listener ref="Processor" />
          <wlevs:listener ref="adapter" />
          <wlevs:source ref="HaInputAdapter" />
          <wlevs:application-timestamped>
               <wlevs:expression>arrivalTime</wlevs:expression>
          </wlevs:application-timestamped>
     </wlevs:channel>
     <wlevs:processor id="Processor">
          <wlevs:listener ref="OutputChannel" />
     </wlevs:processor>
     <wlevs:channel id="OutputChannel" event-type="StringEvent">
          <wlevs:listener ref="CSVBean" />
          <wlevs:listener ref="HaCorrelatingAdapter" />
     </wlevs:channel>
     <wlevs:adapter id="HaCorrelatingAdapter" provider="ha-correlating" >
          <wlevs:instance-property name="correlatedSource" ref="clusterCorrelatingOutstream"/>
          <wlevs:listener ref="JMSOutboundAdapter"/>
          <wlevs:instance-property name="failOverDelay" value="2000"/>
          <wlevs:listener ref="CSVBean" />
     </wlevs:adapter>
     <bean id="CSVBean" class="com.oracle.cep.training.listeners.EventListenerCSV">
     </bean>
     <bean id="CSVOutboundJmsMessageConverter" class="com.oracle.cep.training.converter.CSVOutboundJmsMessageConverter">
     </bean>
     <wlevs:adapter id="JMSOutboundAdapter" provider="jms-outbound">
          <wlevs:instance-property name="converterBean" ref="CSVOutboundJmsMessageConverter"/>
     </wlevs:adapter>
     <wlevs:adapter id="JMSInboundEventsAdapter2" provider="jms-inbound">
          <wlevs:instance-property name="converterBean" ref="CSVInboundMessageConverter"/>
     </wlevs:adapter>
     <wlevs:channel id="clusterCorrelatingOutstream" event-type="StringEvent" advertise="true">
          <wlevs:source ref="JMSInboundEventsAdapter2"/>
     </wlevs:channel>
     <wlevs:adapter id="adapter" provider="httppub" />
</beans>

Sorry maybe I should have gave detailed information:
On the visualizer I opened the EPN->right click on the http pub adapter->open panel-> trace event->put the channel name->start->get a message "you are about to start event tracing"->pressOK
nothing happens the status stays OFF.
In the Eclipse (I run the server from the Eclipse) I get:
<20:44:33 IST 08/12/2011> <Error> <EventInspector> <BEA-2060506> <Stage adapter cannot be configured for event tracing because it is not an event source. The stage must implement StreamSource or EventSource to be an event source.>
When going to view strean the channel is not there.
Am I doing something wrong?

Tuxedo calling EJB in pub/sub model

Hello Everyone,
I have a tuxedo application which works on pub/sub architecture. I have an eLink
adapter which publishes the data from the database and an another adapater which
has subscribed for it. So once this gets the data(tuxedo server-c program) how
does this call EJB(java)in my WLE Domain 5.1v . does JOLT/JET help in such scenarios?
Just wondering JOLT enabling of the server (the server which subscribes for the
data) helps here!
Please help. It's urgent.
with regds
siva

Hi,
we have exactly the same problem!! We also use FP14
Please help!
Greetings
Thomas

A question regarding Synchronous, Pub-Sub non-durable model

          Scenario:
          Non-durable, publish-subscribe, syncronous model.
          Publisher1 and Publisher2 both post messages to a Topic at the same time. How to
          design the non durable Subscribers that would be able to obtain both these messages
          in the same thread?
          e.g. if i in my program I create 2 subscribers, with selectors configured for the
          2 different messages...
          program start
          1. create sub1 using selector1 for topic1
          2. create sub2 using selector2 for topic1
          3. sub1.receive(timeout)
          4. sub2.receive(timeout)
          5. further processing using both the obtained messages
          6. program end.
          In the above case, if messages arrive at the same time in the topic, only sub1 will
          be able to get the message, as sub2 won't be active at that time.
          Is there anyway to acheive this considering Synchronous, Pub-Sub non-durable model
          is to be used?
          Many thanks...


          Thanks for the response.
          Is a subscriber active the moment it is created?
          e.g. objSub=tsession.createSubscriber(topic,strMessSelector,true);
          or it is said to be active when we call
          objSub.receive() (in case of synchronous subscriber)
          "Shean-Guang Chang" <[email protected]> wrote:
          >I don't know the details of the design. You can use a single subscriber
          >without a selector and then do two receive to get both message.
          >If you have to use selector so sub1 can only select message from pub1 and
          >sub2 can only select message from pub2 then you need sub3 without a
          >selector and sub3 will do blocking receive first and then once the sub3
          >receives a message you can use sub1 and sub2 to do receiveNoWait.
          >
          >e.g.
          >while (true) {
          > if (sub3.receive() ! = null) { // have message in the topic
          > if (sub1.receiveNoWait() != null) { // got message from pub1
          > do something
          > }
          > if (sub2.receiveNoWait() != null) {// got message from pub2
          > do something
          > }
          > }
          >}
          >
          >"vinay s" <[email protected]> wrote in message
          >news:[email protected]...
          >>
          >> Scenario:
          >> Non-durable, publish-subscribe, syncronous model.
          >> Publisher1 and Publisher2 both post messages to a Topic at the same time.
          >How to
          >> design the non durable Subscribers that would be able to obtain both these
          >messages
          >> in the same thread?
          >> e.g. if i in my program I create 2 subscribers, with selectors configured
          >for the
          >> 2 different messages...
          >>
          >> program start
          >> 1. create sub1 using selector1 for topic1
          >> 2. create sub2 using selector2 for topic1
          >> 3. sub1.receive(timeout)
          >> 4. sub2.receive(timeout)
          >> 5. further processing using both the obtained messages
          >> 6. program end.
          >>
          >> In the above case, if messages arrive at the same time in the topic, only
          >sub1 will
          >> be able to get the message, as sub2 won't be active at that time.
          >>
          >> Is there anyway to acheive this considering Synchronous, Pub-Sub
          >non-durable model
          >> is to be used?
          >>
          >> Many thanks...
          >
          >

Pub.Sub.Agent problem

Hi everybody,
i have an iMac G5 and a Macbook intel 2.5 ghz.
Sometimes i use the wifi network to send file from a computer to another.
Now the iMac and the Macbook have the same probem.
Pub.Sub.Agent use the 70/90 % of cpu.
I don't understand when it started.
How can i stop that? If i close mail and safari seem the problem temporary solved, but when i close (forced) the pub.sub.agent in few mintutes it starts again.
Thank you in advance and sorry for my bad english

One or more of them is probably broken. Remove them one by one and see if the problem goes away.

CUCM 9.1.1.20000-5 is supported by SAP CRM7.0?

My client has CUCM 9.1.1.20000-5, I need to know if it is compatible with SAP CRM 7.0

Hi Guys,
So I have been doing lots of reading and investigating before I decided to reply.
What I find is the following:
The MD5 Checksum on the Cisco CCO and on my PC is exactly the same and I have checked this using a MD5 tool. However, when I run the upgrade, the MD5 seems to be different (Do not see error about that).
I also think I may have insufficient space available and have verified this using RTMT. I tried to locate the LogPartitionLowWaterMarkexceeded and LogPartitionHighWaterMarkexceeded alerts in RTMT to adjust the thresholds but I do not see these alerts either in the logs.
I have adjusted the 9.1 ova template to match 10.5 requirements as discussed in the Cisco document and still get same error. Changed OS, VM Nic adapters, etc.
I have loaded the ciscocm.vmware-disk-size-reallocation-1.0.cop.sgn file as well.
Everything I am referring is in the doc attached. I am out of ideas now.

CUCM 8.6.2.20000 Pub & Sub DRF Local never starts when servers started

Similar Messages

Maybe you are looking for