CUCM 8.6.2 /common Partition on read-only mode

Hi Guys.
We have installed a CUCM 8.6.2 on a UCS C210 and everything was looking fine for the last two weeks.
I´ve noticed that "CDR Repository Manager" and "Cisco CAR DB" was not running, so I´ve accessed the CLI to start the "Cisco CAR DB" service.
For my surprise, after logging in, I received the following message:
============================
Command Line Interface is starting up, please wait ...
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only file system)
        at java.io.RandomAccessFile.open(Native Method)
        at java.io.RandomAccessFile.<init>(RandomAccessFile.java:216)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(ciscoRollingFileAppender.java:100)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoRollingFileAppender.java:43)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at org.apache.log4j.config.PropertySetter.setProperty(PropertySetter.java:196)
        at org.apache.log4j.config.PropertySetter.setProperty(PropertySetter.java:155)
        at org.apache.log4j.xml.DOMConfigurator.setParameter(DOMConfigurator.java:530)
        at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.java:182)
        at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurator.java:140)
        at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfigurator.java:153)
        at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOMConfigurator.java:415)
        at org.apache.log4j.xml.DOMConfigurator.parseRoot(DOMConfigurator.java:384)
        at org.apache.log4j.xml.DOMConfigurator.parse(DOMConfigurator.java:783)
        at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:666)
        at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:616)
        at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:584)
        at org.apache.log4j.xml.DOMConfigurator.configure(DOMConfigurator.java:687)
        at sdMain.initialize(sdMain.java:479)
        at sdMain.main(sdMain.java:646)
java.lang.NullPointerException
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.updateIndex(ciscoRollingFileAppender.java:117)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.nextFileName(ciscoRollingFileAppender.java:92)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.append(ciscoRollingFileAppender.java:74)
        at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:221)
        at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:57)
        at org.apache.log4j.Category.callAppenders(Category.java:187)
        at org.apache.log4j.Category.forcedLog(Category.java:372)
        at org.apache.log4j.Category.debug(Category.java:241)
        at com.cisco.iptplatform.cli.CliSettings.getInstance(CliSettings.java:112)
        at sdMain.initialize(sdMain.java:491)
        at sdMain.main(sdMain.java:646)
log4j:ERROR No output stream or file set for the appender named [CLI_LOG].
   Welcome to the Platform Command Line Interface
VMware Installation:
        1 vCPU: Intel(R) Xeon(R) CPU           E5649 @ 2.53GHz
        Disk 1: 80GB
        4096 Mbytes RAM
    WARNING:
        The /common file system is mounted read only.
        Please use Recovery Disk to check the file system using fsck.
============================
In past months, we´ve noticed this error on MCS7800 servers, nothing about UCS servers.
Here is the link for the correction on MCS:
https://supportforums.cisco.com/docs/DOC-12955
My doubt is how could be possible to have the same error on my CUCM virtual machine, since his Hard Drive is a vDisk?
Did you already have this same problem?
Any help would be appreciated.
Thanks!

Hi
You get this type of corruption if the VM is powered off rather than being shut down, or if power is lost to the host for example (or it crashes for whatever reason).
You just need to run the file check on the recovery CD, but at least you don't have to walk to the server to do it (you can just mount the ISO from vSphere).
Aaron

Similar Messages

My windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

my windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

All Office applications will also try to open a temporary work file in the same location as the source file. This implies the source file directory also needs to be writable for this temporary file. Since the default HFS+ driver provides only read-only access, such temporary files will fail to open, and will cause the application to fail.
As a test copy the file you want to edit, say an Excel spreadsheet from the OSX file system to the C: drive on the Windows side and try to open it. If you look in this directory, you should see two files, the source and a temporary file. You may have to force the temporary file to be opened on a read-write file system, by manipulating the folder for temporary files.

Can I change some partitions of the partitioned table read-only?

I have a table partitioned by range( partitioned hourly).
I want to keep the history data online for query (the history data is rarely accessd). But in this way the table is too large. The performance may be a big problem. So some problems may be raised:
How can I change the aged partition read-only?
How to decrease the workload on this table and improve the performance?
Oracle 10g (10.2.0.3)+Solaris 10

How can I change the aged partition read-only?In 10.2.x.x I think only tablespaces can be made read only.
In 11g you can place tables in read only mode, but I don't know about specific partitions.

TG4MSQL ora-28500 error on RECOVER login in READ-ONLY mode

We're connecting from a 10.2 dbase to SqlServer2000 via TG4MSQL. No upfront problem connecting but the Oracle .trc file shows below error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'RECOVER'. (SQL State: 00000; SQL Code: 18456)
Below is the content of .ora file:
HS_FDS_CONNECT_INFO=INETSQL3.ComPro
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_TRANSACTION_MODEL=READ_ONLY
We are using READ-ONLY mode so the RECOVER login was not defined on SqlServer.
Anyone know why TG4MSQL is trying to open a connection as RECOVER? And is there a way to stop it?

Pending transactions turned out to be the culprit. Below is info from our TAR that
provides some detail on what RECOVER is doing.
Oracle handles all transactions as if they were distributed transactions. He takes a very conservative approach on the assumption that you may want to update
or insert later. This has been like this since Oracle version 6 and will never
change. Hence all transactions get handled as a distributed transactions even though there are no simultaneous updates. A common remote transaction would involve reading from SQL Server and then taking that data an inserting into an Oracle database. In the event a transaction gets aborted for some reason RECO must rollback the transaction. SQL Server requires a valid username/password and hence uses the recovery username/password specified in the gateway init file. The default parameters for both are RECOVER , if they are omitted in the init.ora file for the gateway. Obviously these do not exist on SQL Server. Note that this recovery process is detected and processed by the Oracle kernel. READONLY mode only prevents inserts, updates or deletes to be issued to SQL Server and nothing else. The gateway has nothing to do with handling and monitoring transactions to SQLServer. In all likelyhood you have several in doubt transactions in the dba_2pc_pending view. As long as those entries remain RECO will continue to try and rollback these in doubt transactions and fail each time due to an invalid username/password. This will go on until you either manually remove them or give RECO a valid SQL Server username/password to use.
OPTION 1
==========
Code the follwing in your gateway init.ora file
HS_FDS_RECOVERY_ACCOUNT=use the username specified in your db_link
HS_FDS_RECOVERY_PWD=use the password specified in your db_link
OPTION 2
==========
Define a username with password RECOVER on the SQL Server database you are connecting to
OPTION 3 (Manually removing in doubt transactions)
================
Use dbms_transaction.purge_lost_db_entry(local_tran_id)
STATUS should be in collecting
Please see Metalink
Note.126069.1 Ext/Pub Manually Resolving In-Doubt Transactions Different Scenarios
for detailed information

How to provide a LINK on normal TEXT field in read only mode

Hi,
I have a TEXT item and that is used for only url purpose.
so a user can enter something like http://www.abc.com in that field.
So when I am in read only mode for that item, I want a link also on that text..
how can I do that.
thanks,
Deepak

You could create a pl/sql expression computation on the TEXT item which will convert the value shown for the field to be a HTML link
'<a href="http:// ' || :PXX_TEXT || '">' || :pXX_TEXT || '</A>';Make the computation conditional using the same condition as is used to render the item as read-only
varad

Issue regarding open word file and read only mode using c# & MS-word interop

i am programmatically open a word file for search and highlight keyword. my routine is working fine. the problem is when i am opening the file programmatically then a dialog come and ask me to open file in read only mode. the dialog look like below one
actually i do not want to open the file in read only mode because people can open and like to change and save. so guide me what i can do to not to open the file in read only mode.
here is my full code. just have a look and tell me what is wrong in my code or tell me any trick as a result i can open the file not in read only mode. here is my code.
private void button1_Click(object sender, EventArgs e)
            object fileName = "";
            string filePath = "";
            string strSaveasPath = "";
            DialogResult result = openFileDialog1.ShowDialog();
            if (result == DialogResult.OK)
                fileName = openFileDialog1.FileName;
                //strSaveasPath = Path.GetDirectoryName(path.ToString());
            //fileName = "Z:\\C0000000003.doc";
            List<string> _list = new List<string>();
            _list.Add("tridip");
            _list.Add("arijit");
            //object fileName = "D:\\CVArchievePath\\C0000000001.doc";
            object textToFind = "test";
            object readOnly = false;
            Word.Application word = new Word.Application();
            Word.Document doc = new Word.Document();
            object missing = Type.Missing;
            try
                doc = word.Documents.Open(ref fileName, ref missing, ref readOnly,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing,
ref missing, ref missing,
                                          ref missing);
                doc.Activate();
                object matchPhrase = false;
                object matchCase = false;
                object matchPrefix = false;
                object matchSuffix = false;
                object matchWholeWord = false;
                object matchWildcards = false;
                object matchSoundsLike = false;
                object matchAllWordForms = false;
                object matchByte = false;
                object ignoreSpace = false;
                object ignorePunct = false;
                object highlightedColor = Word.WdColor.wdColorGreen;
                object textColor = Word.WdColor.wdColorLightOrange;
                object missingp = false;
                Word.Range range = doc.Range();
                foreach (string line in _list)
                    textToFind = line;
                    bool highlighted = range.Find.HitHighlight(ref textToFind,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing);
                System.Diagnostics.Process.Start(fileName.ToString());
            catch (Exception ex)
                Console.WriteLine("Error : " + ex.Message);
                //Console.ReadKey(true);
            finally
                //doc.Close(missing, missing, missing);
                if(doc!=null)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(doc);
                if (word != null)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(word);
                word = null;
                doc = null;
                GC.Collect();
                GC.WaitForPendingFinalizers();

I know it's a very old issue and I reached to this page looking for a solution. Finally, I have found a fix to this problem.
The problem is that we create an instance of Word and do not close it correctly. This makes program believe that the file is already open and hence you're getting the respective message of file being locked by you.
Set the visibility of your application to true and then when you close it both file and instance should close and you will not get the problem again.

I am not able to use Firefox with Sharepoint - I can only open a file in read-only mode and cannot checkout the document and edit.

I would like to use Firefox with Sharepoint.
However, I am only able to open a file in "read only" mode whch means I cannot edit the document and save it. I am also not able to "check-out" a document in Sharepoint and edit it at the same time.

This may not work for everyone, but I solved this problem by clicking on the file name in sharepoint, not the document icon to the left of the name. This then brought up the various options, including checking out, editing, version history etc. It seems obvious but I have only just realised this!

ALV: columns in read-only mode look like editable columns in edit mode

Hi,
My application contains an ALV table which should be toggled between display and edit mode like the rest of the fields.
The evident solution was to use
if_salv_wd_table_settings~set_read_only( abap_true or abap_false)
However, unlike the rest of the fields, when the application changes into display mode and the fields get grey like in any SAP application, the columns in the table which were editable remain white, and those which were not editable and thus grey, get now white, too, instead of the other way round. So it will look to the normal user, as if now all columns would be editable!
Of course, he would realize that they are not when he tries to edit them, but this is irritating.
See following link with screenshots (only active for 3 weeks from now on):
[Link to my webmail space/SDN: .|https://businesswebmail.telekom.at/filestorage/MzYxMTk1OTMx/]
I have looked
through my books ("Einstieg in Web Dynpro for ABAP", "Praxisbuch Webdynpro for ABAP", ...)
through the wiki for Webdynpro for ABAP here in SDN as well as through this forum (by searching with "ALV edit")
through the notes in BC-WD-CMP-ALV
but could not find any solution. Most tables in those PDF articles found here in the WD4A wiki also show white cells although they are probabliy in read-only mode (e.g. the imitation of the SE16N browser article).
The attributes to the LO_CELL_EDITOR for both Inputfields and textview columns contain exactly the same values when toggling between display and edit mode (read-only in table settings), so also no chance to change here anything.
Also changing the cell design is not a solution as there is no design that looks like grey for not editable according to WDUI_TABLE_CELL_DESIGN ([SAP Help - WDUI_TABLE_CELL_DESIGN|http://help.sap.com/saphelp_nw2004s/helpdata/en/56/5e9041d3c72e7be10000000a1550b0/frameset.htm].
I do not know if I have made an error, as this is my 3rd Web Dynpro (after the first 2 of the introduction book), or SAP is really inconsistent in User interface between "normal" fields and ALV table fields.
Can you please help me?
Thanks in advance,
Erlend

Hi,
In my application aslo, i have 30 columns out of which 10 are input fields. But, i'm showing the table as ABAP_TRUE incase of Non-editable otherwise to abap_false. Now i'm getting everything as in WHITE cells.
Do you want to show it is Grey mode with Non-editable feature. Is that so.
How many columns are there which has Input fields.
Get the column references.
Now, based on the mode of display create the object as Input or Textview field.
For that column -
If mode eq 'D'.
Create an object for Textview(cl_salv_wd_uie_text_view)
else.
Create an Object for Inputfield(cl_salv_wd_uie_input_field)
endif.
The Append row is a standard button or custom one on ALV toolbar.
Do you want to hide the toolbar or just disable these buttons.
If you want to hide the toolbar then refer my wiki -
http://wiki.sdn.sap.com/wiki/display/WDABAP/NullreferenceforUPDATETOOLBARerrorsofALVinthewebdynpro+ABAP
Regards,
Lekha.
Edited by: Lekha on Sep 30, 2009 8:06 PM

How to display the "display values" in READ Only mode for a SHUTTLE

Hi,
I have a form item of type *'Shuttle'* and using the following LOV.
   select DEPTNAME d, DEPTNO r
    from DEPTIn normal mode..it displays the department name and internally store the Deptno..
Now I converted this item to Read Only mode using Read Only Condition Type
the problem is as soon as it becomes read only...it displays the deptno....not the department name
            Department-   10:20:30How can I display the "display values" i.e the actual department name in read only mode..
            Department-   Department1:Department2:Department3Thanks,
Deepak

Hi,
It seems feature. Shuttle is span tag when it is read only.
Work around could be that
you compute display as text item with LOV display value according shuttle session state and show shuttle and this item conditionally depend case
Br, JAri

Querying up AR Customer OA page in read-only mode for a Single Customer

We are building a Custom Form in which associated Customer <defined in AR> would be queried up.
Now we want to give an option to the User to view the complete details of the Customer. We would be giving a menu option in Tools 'View Customer' thru which he would see the Full Customer Details. <AR Customer OA page>
We have two requirements
1> The Full Customer Details should show up in Standard OA Customer Page the moment page comes up. The user should not be required to query the details.
2> It should be read-only and user should not be able to update any field.
How can we achieve this requirement? I did some RnD but did not see any place in EBS where we display the Customer Page in read-only mode and that too quried up for one particular customer.
Thanks
Arun

Hi Arun,
Please let me know if find any solution for this. We have a similar scenario in which we need to call the customer Page with all the inforamtion populated, related to one customer.
Thanks in advance,
Mannuru

Remove Standby/Read only mode for a database in sql server 2005

Hi,
I have a problem in sql sever . my database is showing standby/read-only mode. i want to remove that mode.please help me for the issue.

HI
Did you assign any DB read only user?
check the administrator guide in your SAP Business one->Documntation->system setup->Administrator guide...
but removing DB read only user is impossible.....

Read-Only mode for a Essbase DB

Is the a way to put my Essbase Db with Historical values in read-only?, I found that the Maxl Archieve option will do but I don't know if this is only for backup.
Regards,
Antonio

If you want to put the entire database into read-only mode, SoL (love that name) gave you the right direction.
If you only want to put part of the database into read-only mode, e.g., 2007 through 2009 data, you can use READ filters to do this.
Have a read here on the theory: http://download.oracle.com/docs/cd/E12825_01/epm.111/esb_dbag/dsefilt.htm
Have a look here on how to do it: http://download.oracle.com/docs/cd/E12825_01/epm.111/eashelp/crtfilt.htm
Regards,
Cameron Lackpour

Team Calendar in Read-Only Mode in Leave Request Approver Screen

Hi,
After lots of interaction and inputs in my previous thread,
Customization Done for 2 level approval of leave in ESS but Facing Problems
       Our Team had decided to make the Team Calendar in Leave Request Approval Screen in Read-Only Mode (more precisely modus=TeamView)
       My question is, is it possible to achieve the same, because instead of adding custom validations using Custom RFC, If it is possible to make the Team Calendar as Read-Only than it will help us to achieve our goals. Please do let us know that is it possible? and, if Yes, How to achieve it?
      On leave request approval screen, we want Approver to take any action via "Show Worklist" and No User Action allowed on Team Calendar (Disabled but not InVisible).
Thanks,
Regards,
Tushar Shinde.

This is the note 1484853 but as i said you cant see it unless you raise a Message for SAP , We have to add yout company to the note.
these are the steps
Symptom
In LeaveRequestApprover application, a higher level manager can
approve/reject a leave though he/she is not the owner of the approval
workitem (TS12300097). It happens when a higher level manager clicks on
the leave in the TeamCalendar launched from the LeaveRequestApprover
application.
Other terms
LeaveRequestApprover, TS12300097, prepare_select, WorkList,
LPT_ARQ_REQUEST_UIAF07
Reason and Prerequisites
Reason:- This is caused because the approve/reject button were not
restricted based on the logged in user.
Prerequisites:- IT105 entries for the backend PERNRs should be correctly
maintained.
You can check here
Object REPS LPT_ARQ_REQUEST_UIAF07
Object Header FUGR PT_ARQ_REQUEST_UIA
FORM PREPARE_SELECT
the note is meant for few customers only

Error when opening XLSX file with Excel 2003 SP3, file does open but in read only mode with temporary name

I am using Excel 2003 SP3 and have the Office 2007 compatibility pack installed. When I open Office 2007 formatted Excel files (XSLX) directly in Windows Explorer, I receive the following error if I do not have Excel already opened:
"Windows cannot find '<path to file>'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."
Even though I receive the error, the file does open; however, it opens in Read Only mode with a name such as "Xl0000024.xls". The number seems to increment up each time it happens.
Now here is the strange part. If I have Excel already open and try to open the file in Windows Explorer, the file opens fine in Modify mode with no error and with the correct file name.
I Googled the error I was getting and found KB211494. It says I should uncheck the box in Options on the General tab that says "Ignore other applications", but this box is already unchecked in my case. Any other ideas? This is
really frustrating as a small percentage of our company has upgraded to Office 2007 with the rest still on Office 2003.

This may be a file association problem. To solve that:
In Windows 7:
1. Right-click the file,
2. Select "Open With"
select [Your Program Here]
3. Check always use this program.
In Windows XP:
1. Locate the file as you have described above
2. Right click the file
3. Select Open with from the pop-up menu
4. Click Choose default program…
5. Select Excel in the Recommended Programs box
6. Check Always use the selected program to open this kind of file
7. Click on OK.
1. Make Excel not available from Office 2007 listed under Programs and Features in Control Panel.
2. Take a registry backup using the steps given here
3. In the registry editor window expand HKEY_CLASSES_ROOT and navigate to .xls right and delete it.
4. Exit Registry Editor
5. Undo Step 1 to make Excel available.
6. Restart the computer and verify it the issue is fixed.
If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

My external hard drive is in Read Only mode...

My external hard drive, which I have used before, is in "Read Only Mode."
I have put files on this drive and taken files off of it before, so it isn't an NTFS issue.
I am still able to write with a different Mac.
FYI, this is a Late-2011 Macbook Air.

You are about to format your storage device. Be sure to copy and take the back up before formatting. Just select the physical disc you want to reformat in the tree on the left-hand side of Disk Utility. You can select a new file system format from the drop down below, and also name the new volume to be created. Showing the info of the newly formatted drive, you can see the disc is now set to read and write.

CUCM 8.6.2 /common Partition on read-only mode

Similar Messages

Maybe you are looking for