CUCM 8.6 call busy between SIP phones and thirdparty phones

Hi Everybody,
I have the following error on my logs:
Invalid Disconnect Cause(cause=47), No Reason Header Appended
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/getXCiscoViPRFallbackIDAndDTMFKey: Device type 8, Pstn Fallback is not enabled|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/getDefCcRegister: Secure status=1, mSrtpPresent=0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/compareAndUpdateMedia: sdpStatus=0, CMEndPointSDP role=1, SIPEndPointSdpRole=2|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/getDefCcRegister: Secure status=1, mSrtpPresent=0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/handleSIPUACSessionExpires: isMidCall[0], response[200], method[102]|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/parseSessionExpires: refresh_interval[1800], refresher[uas]|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/setSIPSessionExpiresTimer: interval[1768] secs|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/handleSecureRec: enforce srtp flag: 0, remote end srtp support: 0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/updateCNToCC: identityCngFlag[0x1f], isConnInfoInd[1], ccContactHeader[]|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/handleSIPConnectInd: Exit with state = outCall_200Rcvd|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/handleSIPConnectInd: Exit with state = outCall_200Rcvd|3,100,63,1.36454459^192.168.0.15^*
14:46:50.091 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/setSIPUpdateFlags: mIsUpdateForSignalingAllowed = 1 mIsUpdateForMediaAllowed = 1 mPendingOutgoingUpdate = 0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/appendReasonHdr: appendReasonHdr - Invalid Disconnect Cause(cause=47), No Reason Header Appended|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/addTransparencyInfo: attaching transparency object|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/appendRPIDHdrForOriginalCalledParty: SIP device does not Support Orig Dialled Phone nego: 0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPCdpc(3,74,281707)/ci=144600614/ccbId=35257792/scbId=0/getDefAe: SIPCdpc=281707, nodeId=3, processNumber=73 ci=144600614, branch=0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |MRM::waiting_MrmDeallocateMtpResourceReq- Deallocate received for CI=53993831 count=0|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |MRM::waiting_DeallocateMtpResourceReq- ERROR Deallocate received for an unknown Call Identifier Ci = 53993831|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_stop_timer: type=SIP_TIMER_DISCONNECT value=500 retries=10|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_start_timer: type=SIP_TIMER_DISCONNECT value=500 retries=10|3,100,63,1.36454459^192.168.0.15^*
14:46:50.098 |//SIP/SIPUdp/wait_SdlSPISignal: Outgoing SIP UDP message to 192.168.0.15:[5060]:
the calling number is 34967850938
the callied number is 19026

Julien,
Please use the link be low to collect cucm traces and use the advanced editor on the forum (located on top right hand corner of the discussion widnow) to attach the trace
https://supportforums.cisco.com/docs/DOC-29901
Ensure you collect the trace from the folowing
1. the server that the phone is registered to
2. If this server is different from the server in the cucm group of the sip trunk, then you need to also collect traces from the server (s) in the cucm group assiged to the sip trunk that connects to the 3rd party cluster...
NB: If you have three servers in the cucm group of the sip trunk, you have to collect the trace from all three servers. This is because calls are dsitributed in a round robin fashion to servers in a sip trunk...
FInally before you send the trace over, please ensure the calling and called numbers are present. Also include the time of the test call
Please rate all useful posts
"opportunity is a haughty goddess who waste no time with those who are unprepared"

Similar Messages

My dad and i use the same apple id, when he recieves a call, hes phone and my phone ring at the same time, why?

my dad and i use the same apple id, when he recieves a call, hes phone and my phone ring at the same time, why? and how do i fix this

Settings > FaceTime > iPhone Cellular Calls > OFF

How do i transfer photos between my macbook and i phone 5s wireless, how do i transfer photos between my macbook and i phone 5s wireless

how do i transfer photos between my macbook and i phone 5s wireless, how do i transfer photos between my macbook and i phone 5s wireless

Place the photos into iPhoto on your Mac. Then when syncing your iPhone using iTunes, clock on the "Photos" tab behind your iPhone's summary tab and make sure the sync instructions are set correctly.

CUBE - DTMF Interworking between SIP INFO and RFC2833

Hi all,
After some testing I noticed that when the cube receives dtmf via SIP INFO it doesn't translate them into rfc2833 on the other side. This happens when the incoming INVITE advertises both SIP INFO and RFC2833.
When the incoming INVITE advertises only SIP INFO then it does the translation to RFC2833 and sends the digits via RTP on the outgoing interface.
CUBE supports both RFC2833 and SIP INFO as it advertises both methods in it's sip messages. Is this the expected behaviour ?
IOS is 15.1(3)T1. CUBE is running on a 3945 router.
I have found bug CSCuh65102 which seems to be a match. Can somebody confirm this ?

Hi,
Please check the following bug
https://tools.cisco.com/bugsearch/bug/CSCtj93573/?reffering_site=dumpcr
CUBE not processing DTMF SIP INFO to RFC 2833 upstream to Network
You can try an upgrade to 15.1(3)T4 or higher and check if the issue is resolved.
HTH
Manish

Query re dect phone and wired phone on same line

Quite long winded but wonder if someone could help please.
I had a dect phone plugged into the master socket. Due to working from home and need for better functionality than the dect phones could give me I bought a Converse 2300 wired phone and plugged it into the master socket.
I then moved to dect base unit to an extension socket in another room.
The dect phone when plugged into the master socket always showed caller ID.
The Converse which is now plugged into the master socket also shows caller ID.
However, I'm having a couple of problems with the dect phone I've relocated to the extension socket.
Firstly, I get a dial tone on the dect phone but when I try to dial a number I hear the key tones but it then just goes back to the dial tone rather than actually dialling the number.
Secondly, caller ID is not displayed on an incoming call on the relocated dect phone - instead the screen just says 'External'. Called ID is however displayed on the wired Converse phone.
I suspect there's a setting somewhere on one of the phones but I can't for the life of me work it out. Or do dect and wired phones not work together on the same line?
Any advice would be much appreciated!
Thanks in advance.

Hi, it sounds like there could be a wiring fault with the extension socket, there would not he any settingsbon a phone that would solve the problem. Is there broadband on the line? If so try changing the ADSL filter.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

After downloading iOS7 on my work phone, all of my personal iMessages come in on both my personal phone and work phone. How do I turn this off?

I recently updated my work iPhone to iOS7 and now all of my iMessages from my personal phone are also coming in to my work phone. How do I turn this off? I only want my iMessages to come in to my personal phone.

You can either turn off iMessage on your work phone, use a different Apple ID for iMessage on it (by going to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID), or go to Settings>Messages>Send & Receive on your work phone and uncheck your personal phone number under "You can be Reached by iMessage at".

Feature phones and multimeadia phone..new catagory

I read somewhere that Verizon will be doing away with the multimeadia catagory of phone and putting then into the Feature phones catagory...and getting rid of the 9.99 data plan. We should be able to buy a good touch phone without having to pay for ANY data plan.
Anyone know if it's true about this upcoming change?

Zak wrote:
Can someone honestly tell me how long it would actually take to use up the 150MB of usage? I use their little data calculator and it says for each category you try to figure out for “each day”. So does this mean if I go out to 5 web pages per day I will use 58.59MB of data per month, because this is what the total tells me?
Thanks
Unfortunately, there is no way to tell as various web pages are various sizes. As an example, on game day nfl.com has a "Scores" page that automatically refreshes every 5 seconds. (meaning that you are re-downloading the entire contents of the page every 5 seconds, or going through approximately 600KB every 5 seconds (or 1 MB in 10 seconds, 6 MB per minute, just over 1 GB in the course of a 3 hour football game). The site has the ability to alter this setting (and also offers a "Mobile" version of the page which is much smaller), but since the phones have a full HTML web browser, you could easily use the full page intended for the desktop/laptop users. Streaming music sites will also burn through data at a very quick rate as they are constantly downloading data from the internet.
Many sites have "mobile" versions which are more "data conscience" and don't download as many graphics and Java applications and thus won't go through data nearly as quickly as the "Full versions", but there is simply no way to tell for sure how much you'll use until you actually use it. My suggestion would be to get the "Unlimited" plan for the first couple of months and use VZW's site to see how much data you're actually using, and then determine if you can stay under the 150 MB limit of the limited plan. (Especially since going just a single KB over the 150 MB limit will end up costing you as much as the unlimited plan.)

Is there a Calendar App that works with both Blackberry phones and Android phones ?

I just recently got a Blackberry Z30 phone. My husband has an LG Optimus G Android phone. Does anyone know if there is a Calendar App that will work on both phones so that we can send appointments to each other that will load into our respective calendars? Right now, we each have to enter the events into our individual phones. I love the Blackberry Calendar (RIM) that came preloaded on my phone since you can customize recurrences, e.g. every 3 weeks plus you can have day, week and month views. I definitely want a calendar with the customizable recurrences feature, which my husband's Android Calendar App does not have. Thanks.
Solved!
Go to Solution.

You Both can Add one email Account on Both Phones and then sync the Calender With Email - This way when one will add a reminder or event it will automatically synced to the other
Regards Eree - Follow me on Twitter - Facebook - Google+
For More visit My Blog

Icloud synced my phone and another phones messages

When i downloaded iOS7 it somehow synced with my sisters phone. Now I get all of her messages on my phone and when I text her I also get a message from "Me". How do I fix this?

This happens when you both use the same Apple ID for iMessage. To fix it, one of you needs to go to Settings>Messages>Send & Receive, tap the ID at the top, sign out, then sign back in with a different ID.

Calls to different SIP proxy and nameserver assignments

How is it possible to call to a user that is registered in different sip proxy? I have tried to use cisco 7905G SIP phone. It does not work only placing the number, because the phone assumes that it uses the same proxy. What nameserver assignments should I place to SIP proxy in order to let other proxys to know that it exists?

if proxy members are registered in different SIP proxyserver the lock of the registry database can become a critical point. This is specially true in a big network. But it is possible to call a user in a different SIP proxy

Switching basic phone and smart phone between members of family plan.

I am considering switching my basic phone with my son's smart phone. He would like to have my phone under his current number and vice versa. I have found the online instructions through My Verizon. He is the only one in the family plan with a smart phone (the rest of us are all basic phones). Do you think Verizon will automatically switch my son's data package to my number? or will I have to contact verizon/go into a verizon store to do so?
This excerpt from the instructions makes me think phone calls and/or visit to the verizon store may be necessary:
"switch devices between two compatible plans on your account. Each person keeps their phone number and plan, but will have the swapped device."
Since I have a basic phone with no data package, are our plans non-compatible?
Thanks!

You can still switch phones. The only problem I see is if he currently has an unlimited plan in which case that may be lost and you'll need to choose the 2, 5 or 10GB plan for your line. Probably best to just call customer service from a different device to make sure everything gets set up correctly.

Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home. Any suggestions on where to look to fix this?

Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home. Any ideas on how to fix this?

That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

Excel activex call changes between Office 2000 and Office XP. How does one manage that?

I have several Active X calls from within a VI. One in particular is
the Excel Cell Value property node in Office 2000. MS has decided to
call it Excel Cell Value2 in Office XP.
I have built and exe on a machine with Office 2000 and can run the code
on a machine with Office XP, but I can not build on the machine with
Office XP. I can also run a VI with that call
on the Office XP box, but if I mass compile the VI I get the broken arrow.
I guess I am confuesed as to why it can run but not compile. If the
ActiveX call is not there for the compile why is it there for the run?
If I can expect this does it work in reverse where I
build on an Office XP box and run on a Office 2000 box?

These problems you are experiencing do stem from the ActiveX changes between Excel versions. When you mass compile LabVIEW checks to see if everything is linked correctly, including ActiveX portions of your code. Since there are slight changes the LabVIEW compiler detects something is wrong, but cannot isolate the problem. You might need to force a recompile of that VI. Check out this link.
http://digital.ni.com/public.nsf/websearch/50D06DEE8B9DC018862565A0006742F2?OpenDocument
Hope this helps!
Andy F.
National Instruments

Difference between Soft Phones and Hard Phones

What is the difference between a frame sent by an IP Communicator (for example) and an IP Phone 7960? What is the difference of the frames sent by these 2 devices. Thank you!

There is no difference, they work exactly in the same way. The softphone sends the same packets than a normal phone. You can take a sniffer trace on both to verify that.
HTH
//Jorge

Can I move a Sim card between phones - and a phone between carriers?

I have a Verizon iPhone 5C and am on the Verizon network. I recently was left (in a will sadly) an AT&T iPhone 6 Plus. I tried just replacing the AT&T sim card with the Verizon one, but a message shows up that it needs to be activated (so I'm moving it back to my iPhone 5C). I'm wondering if I take it to my Verizon store (I can take all the paperwork to prove it is mine) if they can/ will activate the sim card in this iPhone 6 plus or if it really won't work. I figured someone on here would have already tried or have done it already and know the steps to get it working if possible. Thanks!

Verizon will not activate a phone on their network that was not sold specifically for use on their network. If they have not rolled out VoLTE in your area, there would be no way it could physically work anyway.
Your best bet would be to sell the AT&T iPhone 6 and use the proceeds to buy a phone for Verizon if you intend to stick with Verizon.

CUCM 8.6 call busy between SIP phones and thirdparty phones

Similar Messages

Maybe you are looking for