CUCM 8.6 Personal Address Book entry limitation?

Hi Experts,
Can one of you tell me what is the limitation of Personal Address Book entries?
Done a quick search
https://supportforums.cisco.com/thread/2153123
according to this on 8.5 is 1000.
- Is this still the case on 8.6,
- is it per phone or this is the system limitation (per ?server?) ? if having two CUCMs, will this be 2x 1000 (if 1000 is still the case for 8.6)?
Thanks in advance!
Kind regards,
Tibor

Nelson:
The URL that is working for us is:
http://10.2.5.234:8080/ccmpd/pdCheckLogin.do?name=#DEVICENAME#&service=pab
then use your own IP address for the Call Manager node.
Our Call Manager configuration is shown below.
To access the feature, we hit the Services Button, are prompted with a Personal Address Book option, select it, then are promoted for a UserID/PIN (shown further below), at which point I enter my LDAP ID and a PIN. The PIN is created in Call Manager under User Management ==> End User ==> PIN.
Good luck with your process.
Dan

Similar Messages

How can I copy contact entries from the "Personal Address Book" to a subsidiary list without typing 500 individual entries?

There is about to be a death in the family. I need to establish a mailing list of all immediate family members, but it should not contain *EVERY* entry in either my Personal Address Book or my Collected Addresses. Is there something like a drag-and-drop or copy-and-paste facility to accomplish this task?

Check this article for more information on how to create a mailing list.
When sending a message to 500 recipients you may hit a limit imposed by your email provider.
http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Create_Mailing_List
http://kb.mozillazine.org/Limits_-_Thunderbird#E-mail_addresses

Personal Address Book in clients other than Outlook ( e.g. Thunderbird )

Does anybody know what the latest is on PAB integration in Thunderbird. This is a big turn-off for using JES. I am looking at the JCS for two reasons 1.) as an alternative to Ms proprietary lock-in and 2.) for an more open platform to integrate a some of our own software. It's quite frustrating that Sun are supporting Outlook almost exclusively. Convergence is great, but not a replacement for a thick email client. I really like Thunderbird but I can't access personal address books.
Any links for how to add a shared address book in Thunderbird? I'm sure I managed to sync at least the corporate address book when I reviewed JCS 5, but i can't remember and can't find a how to.
I have even considered writing a Thunderbird addon myself to access Address Books using ldap but it seems the PAB entries are locked by Directory Manager access and not available to the PAB user. Is there anywhere else to locate the PAB entries other than at "dn=piPStoreOwner=euan,o=potensol.com,o=PiServerDb" ?

shane_hjorth wrote:
ethoms wrote:
Does anybody know what the latest is on PAB integration in Thunderbird.There is no integration that I am aware of or any planned on the horizon. A major limitation to any development of LDAP PAB integration is the lack of LDAP write support in Thunderbird. Any future movement will be more towards CardDAV as per:
http://wikis.sun.com/display/CommSuite/Project+Aries
It's quite frustrating that Sun are supporting Outlook almost exclusively.Sun is expending a large amount of resources (staff) into the Lightning project which is providing calendar functionality into Thunderbird. That is why there has been so much progress on this front over the past 12 - 18 months. Sun has also rolled Lightning out internally giving it even higher visibility.
http://weblogs.mozillazine.org/calendar/
I'm sure this group would appreciate any feedback, testing etc. that you could provide.
Convergence is great, but not a replacement for a thick email client. I really like Thunderbird but I can't access personal address books.I agree it is definitely a limitation but at this time priorities are elsewhere.
I'm sure I managed to sync at least the corporate address book when I reviewed JCS 5, but i can't remember and can't find a how to.Accessing the read-only corporate address-book should be relatively straight-forward. A quick google shows up a number of examples e.g.
http://www.cam.ac.uk/cs/email/ldapsettings/mozilla.html
I have even considered writing a Thunderbird addon myself to access Address Books using ldap but it seems the PAB entries are locked by Directory Manager access and not available to the PAB user. Is there anywhere else to locate the PAB entries other than at "dn=piPStoreOwner=euan,o=potensol.com,o=PiServerDb" ?The other way would be to access the data using the WAPB protocol to the Convergence/UWC installation which is what Outlook Connector uses to access the address-book information. Unfortunately this protocol isn't yet publicly available. Feel free to push this with your Sun Account Manager.Regards,
Shane.Thank's Shane, your responses are always thorough and very helpful.Thanks for the link for LDAP shared address books in Thunderbird, I think that was the very article I used last time, should have bookmarked it.
I think it was harsh to say "It's quite frustrating that Sun are supporting Outlook almost exclusively.", I didn't realise they had involvement on the lightning project. Since my orignal post I have managed to install the plugin (v 0.8) and connect to my calendars. For feedback, so far it looks awesome, I was so impressed to see my tasks I added in convergence, in Thunderbird. I do recommend a 'how to' guide on Sun's website explaining exactly how to connect to it (couldn't find one myself from google). The 'how to' on mozilla's site forgets to mention that port must be specified (if it's not port 80, I use single-host deployment). Yet to try the experimental caching feature, will give feedback on that another time.
Will check out CardDAV shortly, thanks for link.
Overall, I am really happy with the JCS. If PAB and shared address book read/write/cache are implemented in Thunderbird/Evolution/Outlook then it would be the perfect comms suite. Servers seems to run really well although I have not put any real load on them yet. :-)

Relationships in Address Book entries

Are there any applications which make use of the relationships within the OS X address book entries? I'm talking about the ability to specify one's brother, spouse, parents etc...
Does this field actually serve a practical purpose for anything?
I'm just curious
Terence

Address Book imports & exports data in "vCard" format, a standard that is widely used & understood by many applications. This more or less defines how the data fields are structured & provides for such things as an open ended method for defining fields beyond the obvious ones like name, address, phone number, etc.
In Address Book, if you click & hold on a field like spouse, you get a popup menu with a few options, like going to that person's card or doing a spotlight search on their name. Since this is open ended, you can create any 'relationship' field you want & use it with these popup options. What's more, Apple provides the ability to define new options for the menu & a way to pass field data to them, which allows developers (including everyday users with some knowledge of AppleScript) to add plugins to increase the functionality of the application.
I'm not aware of any plugin that extends the functionality of relationship fields ("related names" in AppleScript terminology), but it should be possible to create them in much the same way other plugins are created. If you are interested, you might want to check out the structure of the script plugins Apple offers (see Apple - Software - AppleScript - iCal) or of third party ones (see burger locator for a silly but educational example).

Batch edit Address Book entries

Does anyone know of a way to change a number of address book entries at the same time?
Say, for example, You move offices. Now you need to change the work address for 150 people... how would you go about doing that?

Applescript.
Here for example is one that changes a load of email addresses. You would use something similar for changing postal addresses.
AK
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "Address Book"
(* Change Domain Name of emails in Address Book *)
(* AK Aug 2005 *)
set OldPart to "xyz" --<<<<< change here
set NewPart to "tuv" --<<<<< change here
set {OldDelim, text item delimiters} to {text item delimiters, "@" & OldPart & "."}
set TheList to every person
repeat with One in TheList
set MailList to every email of One
repeat with OneMail in MailList
set Bits to text items of ((value of OneMail) as text)
if (count of Bits) > 1 then
set NewValue to item 1 of Bits & "@" & NewPart & "." & item 2 of Bits
display dialog ((value of OneMail) as text) & return & NewValue
-- set value of OneMail to NewValue
end if
end repeat
end repeat
set text item delimiters to OldDelim
end tell</pre>

Address Book Entries gone!!

All my address books entries have disapeared!!
In the corner it says: Updated 28/06/2005 which is of course wrong.
In my .mac account all entries are there, but also when I try to sync it nothing happens.
Thank you for any help!!
Powerbook Mac OS X (10.4.7)

Are you the fourth person who has posted on this issue today? Amazing--and we are all paying $100/year for the opportunity for Apple to [expletive deleted] us.
Dual G5 + 15" MBP 2GHz Mac OS X (10.4.6)

Personal Address Book Empty

We are running GW 7.0.3. BES 4.1.6.23 I don't remember the mr number. The BES is running the GW 6.5.7 client. I have one user out of 40 that is experiencing this. The personal address book that the Blackberry (BB) is supposed to sync to is empty, however, all of the contact entries are on the BB. We tried to track this down the other day and while we were looking at her GW client the entries popped back in. Now they are gone again. We have not done anything that would cause the entries to pop back into the address book. We did notice that her BB had just synced in the last minute.
Thanks,
Bill

Filter on the BB is based on catagory, so I would suspect that it wasn't done on the device; now if the user could have don it on the GW client but I wouldn't expect that to effect the sync to BES? That's a odd one, I may have to try that myself and see if I duplicate it!
But no, if the filter was turned on in the GW address book, only the user could have done it or someone logged into GW as that user.
<[email protected]> wrote in message news:[email protected]...
We found that the view filter in the GW client had been turned on so only groups would show. The problem is the user did not make this change. All of her addresses returned when she turned filtering off. Is there any way this could occur without manual intervention by the user? Thanks.
>>> <[email protected]> 2/4/2010 7:53:AM >>>
SOAP. Also we will be upgrading GW to 8.0.1 on 2/13/10. Are there issues with my system after the upgrade that I should be aware of? I will post back with test results. Thanks.
>>> Michael Rae<[email protected]> 2/3/2010 1:16:PM >>>
Are you running your BES in SOAP mode or OAPI? Soap on 4.1 has major issues.
Regardless, what you might try is in the properties of the user in the PIM sync, turn off address book sync, wait and then enable it. Also once the entries are in on one place such as the BB, select the sync to be one way such as device to desktop only. Remeber too that contact sync is a low priority function, it may take up to 4 hours to see results from any changes made so don't get to rushed with making changes and then not see them take effect so you change them again with no results after a few minutes. Stopping and restarting the BB Sync server can speed this wait up.
Another thing to look for is the devices radio coverage, make sure you have as much coverage on the device as possible as I have seen some really weird contact sync issues when a BlackBerry drops in an out of data coverage.
FYI - Hang in there, you may well see BES 5 for GW by late summer or early fall of 2010, it's moving along very well and it's a major improvement.
<[email protected]> wrote in message news:[email protected]...
We are running GW 7.0.3. BES 4.1.6.23 I don't remember the mr number. The BES is running the GW 6.5.7 client. I have one user out of 40 that is experiencing this. The personal address book that the Blackberry (BB) is supposed to sync to is empty, however, all of the contact entries are on the BB. We tried to track this down the other day and while we were looking at her GW client the entries popped back in. Now they are gone again. We have not done anything that would cause the entries to pop back into the address book. We did notice that her BB had just synced in the last minute.
Thanks,
Bill

Personal Address Book Error !

hi
i have added the ip phone service personal address book,subcribered the service for the phone,and i can see the service from the phone when i press the services button.But when i search the entry in the PAB ,it shows the message "Error:-7ffbc5c2:User(none)was unable to be validated(14910)",what's wrong with it?
thanks

Hi
It sounds like you've subscribed the service but haven't either defined the correct parameters, or set the parameters for the user you are subscribing.
As you create the service in CCMAdmin, you need to defined userid, pin and prefix parameters as defined in this document:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800b2eba.shtml
Then each user has to either use ccmuser to set their password and userid when they subscribe, or you need to do it for them individually from ccmadmin.
Please rate helpful posts...
Aaron

Access to pab (Personal Address Book)

Hi,
I am trying to access the personal address book using the following DN:
ou=testuser,ou=People,o=example.com,dc=example,dc=com,o=pab
I am able to connect to this only when i login as a directory manager. But I need to access using the testuser's credentials. Is there way to handle this, because I may not be able to get the credentials of directory manager in production environment?
Thanks and Regards,
Kamal

Looks like you're missing the ACI that grants a User to read, search for entries under ou=testuser,ou=People,o=example.com,dc=example,dc=com,o=pab
Please refer to the Calendar / Messaging product documentation for this.
Ludovic.

CM 7.1 error when access Personal address book /Corp Directory

We upgraded the CM from 6.1 to 7.1 and when I access personal address book and Corp directory I get the Same error message "Error contact your Administrator". I have checked the URl adn they look correct. This is on most phones. Some are working fine. 7975, 7941

This error message indicates that the c:\CiscoWeb\art\art.ini entry still points to the old Lightweight Directory Access Protocol (LDAP) configuration information. In order to overcome this error message, delete the ART database and reinstall the CAR plugin.

Reading Personal Address Book from Forms 6i.

I need to read entries from outlook personal address book. I am using form 6i. Form should read entries in personal address book and return values back to form.
I can open a new mail message window to access outlook address book but my requirement is to read the entries of the address book.
I am planning to use DLLs (convert dlls into pll and access the functions of address book). But I did not do it yet. If anyone has done this kind before please share.
Please post your suggestions.

Any suggestions ?

How do i remove my photo from my Address Book entry?

two questions: first, how do i remove my photo from my entry in Address Book? i should be able to click "Edit", select my photo and hit the Delete key and be done, but no - hitting the Delete key does nothing except make the photo blink.
second, i just posted a comment on a web page that i've never been to before, on a site that i've never been to before, and my photo appeared on the web page next to my comment. very creepy. anybody know why this is and how i make it stop? does it have something to do with my Address Book entry?
update: i've consulted Address Book's help and it tells me to select the card then go Card -> Clear custom image, but when i do, that menu item is grayed out.
further update: i've worked around the problem by taking a screen shot of a blank white area of a webpage and making that my photo...but i shouldn't have to do that and would still like to know how one actually deletes one's photo from Address Book. Address Book's help indicates that i'll find such photos in Library/Images/People, but there's no such directory in any of my Library folders. Address Book's help is not being very helpful today.
tia...

there is actually no way to completely delete an image for you address book entry. you can only change it to something else as you did.
as for the image on that website, most likely it pulled your photo from your webpage on some site like My Space, Facebook etc. do you have a page like that? some sites will tap directly into your webpage and pull your pic from it.

How can I delete ALL of my Address Book entries and start fresh?

Yes. I know that sounds extreme, but……
I use Outlook on a PC at my office, and I have an sbcglobal/Yahoo mail account. I look upon my office Outlook as my ultimate contacts list (over 1,100 entries) and my calendar.
I use the sbc supplied free Intellisync software to sync all of my calendar and contacts from my office PC into sbc/Yahoo. That way I actually get e-mail reminders of appointments, etc. in addition to my Outlook notifications. It is actually pretty nifty.
I have also successfully signed-on to my Yahoo account at home on my MAC and exported all of my contacts from Yahoo (which had been populated by the PC Outlook listings via Intellisync) onto my desktop and then imported them into Address Book. But I did that some time ago and now my Outlook listings have been updated rather substantially. I would like to able to do a complete re-install of the new and improved contacts from the Yahoo repository.
Again - I certainly do not want to delete the Address Book app itself – I just want to start with a clean slate so there are no conflicts or duplicate entries (which in fact is seemingly a bug in the Yahoo/Intellisync. Is there a way to completely wipe clean all of my Address Book entries?
Thanks
Theo
G4 (FW800) Mirrored doors Mac OS X (10.4.8) Dual 1.42GHz; 1.5GB DDR SDRAM; 20" HD Cinema Display; iSight;

Hello Allan -
Your help on a previous post was great re: my wanting to know how to delete the Address Book contents so I can re-import an updated list form my office Outlook, via my yahho/sbcglobal import.
Well - here is an interesting quandary:
I have successfully exported my yahoo address book/contacts as a .vcf file Yet - once I have expunged the prior Address Book data and want to now import the NEW Yahoo data to rebuild the database it only takes (enters) the phone numbers and does NOT import ANY of the address information. I am positive I did this once since our original exchange and everything transferred just fine, but now….?!
What I cannot determine is where the fault may be: does the export NOT include the addresses (in which case I am doing something fundamentally stupid wit the export) or the vcf cards are complete, but Address Book is not “seeing” anything other than the phone #s and e-mail addresses.
Any thoughts?
Dazed and confused
Theo

My original computer hard drive crashed. I have a new laptop, but I lost all my address book entries. Is there a way I can transfer my contacts on my ipad to my non-apple laptop? Tom B

My original computer hard drive crashed. I have a new laptop, but I lost all my address book entries. Is there a way I can transfer my contacts on my ipad to my non-apple laptop? Tom B

If you have a Mac, it's pretty easy. But you don't (should I make a pitch for you to get a MacBook Pro in the future)?
This should help you out to sync it back to several non-Apple software:
http://support.apple.com/kb/HT1296

Reply works, but address book entry doesn't

I have an odd problem that's making me a litttle batty. I have an friend I e-mail regularly and--since recently switching to Mail from Eudora--I've been finding that some of my messages are not getting through.
I'm not 100% certain, but it seems that when I send a new message that's addressed from the Address Book entry, the message is never received. But when I REPLY to a message from this same recipient--same address--the message goes through just fine.
I've reviewed the address again and again and it's entered correctly.
When I look at the Long Header, one difference I note between the received and no-received maessages is under Content-Type.
A successful message has:
Content-Type: multipart/alternative; boundary=Apple-Mail-8-603300258
And a failed message:
Content-Type: text/plain; charset=US-ASCII; format=flowed
Another difference is that the failed messages--the ones that originated with me have something called:
Content-Transfer-Encoding: 7bit
While the messages I reply to don't have that line at all.
The recipient--by the way--is at work at a large organization. So I wonder if their mail servers are blocking messages with certain kinds of encoding?
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
OK, OK...this just in. While I was composing this message, I was also franticly corresponding with the adressee in question, trying to troubleshoot this. I may have solved my own problem, but I'm going to post this anyway... In hopes of solving someone else's problem, and possibly getting some responses that will enlighten me further (cuz I just don't get this).
On a wild guess/hunch, I went into PREFERENCES/COMPOSING and changed the Message Format: from Rich Text to Plain Text. The next test message got through! One difference (if it matters??) I found in the Long Header was the
Content-Type changed from:
text/plain; charset=US-ASCII; format=flowed
to
text/plain; charset=US-ASCII; delsp=yes; format=flowed
So anyway...I'm completely flummoxed. Any ideas, clues, answers out there? I'm not going to trust yet that this problem is completely solved. So I'll leave this as an open question for now.
verbosely yours,
Roger
Mac G5 Mac OS X (10.4.5)

Hmmm... there's nothing fancy about the signature (no bolds, itals or other styles or colors). But does that mean that it IS plain text? My setting when I made the signature(s) was Rich Text, I'm sure. So would that apply, even though it's plain for all intents and purposes? And if it's not. How is it changed to Plain Text?
As far as the SMTP settings. I tried one change last night. I changed the Server settings from "smtp.ispname.net:username" to "smtp.ispname.net:[email protected]". When I tested a message to the address/server I've had the most problems with, the message arrived successfully. But I don't think that proves anything as yet. The nature of the problem has been mysteriously intermitent anyway. (that message had my regular signature as well).
AS I'd mentioned, I've been moving stuff out of my Sent Mail folders to keep things organized and for reference (Is doing that OK? is Sent Mail suppposed to be left wher it is for some reason?). But on informal investigation, I would say that all of the messages I've sent--original or reply--HAVE shown up in the Sent Mail folder.
The discussion thread I'd been involved in with you before is:
http://discussions.apple.com/thread.jspa?threadID=347863
However, I haven't added any posts since way back then.
Thanks you for any insights you can give me with this. If you're not on Apple's payroll, you should be.
Roger

CUCM 8.6 Personal Address Book entry limitation?

Similar Messages

Maybe you are looking for