CUCM 8.6 - Unified CM Rhosts error message
Hi Guys,
My Customer verified in CUCM reports a message error about the Rhosts. "The rhost file on x.x.x.x does not match the publisher". I verified that the restart about the A Cisco DB will be solve the problem. Is correct my analysis? If yes, what is the impact in restart this service? I believe that is more recommendad to do in window maitenance.
Thanks,
Wilson
Hi Wilson,
Your analysis is correct. You should restart the A Cisco DB service in off hours if possible, although i have seen that it does not cause any issues even during production hours most of the times. If the issue persists after restart then you should contact TAC, as in a few cases they require root access to change the rhosts , so that they are the same on all the servers.
HTH
Manish
Similar Messages
-
CTSMan 1.9.1 and CUCM 8.6.2 sync problems Error 502407
Hi,
I ran into recent problem synchronizing CUCM 8.6.2(b) into CTSman 1.9.1
CTSMan is getting an Error message: 502407
Details
ID:
502407
Severity:
critical
Module:
DiscoveryMgr
SubModule:
CTIAdapter
Summary:
Communication to Unified CM failure
Recommendation:
Verify CCM App User credentials. Verify CTIManager service is activated on the primary application server.
Message:
Unable to create CTI adapter to Unified CM 'CUCM-xxx' because Provider is null.
I researched this earlier in CTSman admin guides, and this error points to CUCM CTI Manager service to be restarted. I did restart this as well as other services, including CUCM hardware itself and, but in vain.
Among other things, i followed the CUCM/CTSman guides when bringing CUCM into CTSman to: created an application user account within CUCM and allocate a proper permissions/user groups etc... it was done.
Among other things there are other servers like Exchange being synchronized with it ( had problems with it earlier that dealt with certificates, it was corrected.).
Can anyone help with this issue.
Responses will be greatly appreciated.
Thank you.Thanks Manish again for this.
I did get few MediaReosurceListExhausted events from RTMT alerts but was not paying much attention to them. Location bandwidth settings have been checked and increased a bit for sites which were repeatedly getting these events. I will monitor to see if that reduces these alerts. Could you please advise how I can verify it is hitting the maximum limit?
I have also raised this with Cisco TAC and some cores were found on the CUC subscriber server. We seemed to have run into a bug according to Cisco TAC as in here https://tools.cisco.com/bugsearch/bug/CSCug61581/?reffering_site=dumpcr and both CUC servers have been upgraded to 8_6_2_24901_1. It has fixed cores and we are now monitoring the voicemail service for few days to see if it will reoccur.
Regards, -
Getting error on UCM SUB every minute
And the thread count on the tomcat service is over 2000
The IPMA service is running, I've restarted the tomcat and IPMA service but still seeing error
This is only happening on 1 of the SUB in cluster, the PUB and other SUB are fine. The only recent change is we are testing CUPS and have recently activated a handful of CSF devices for users using Jabber, but that seems to be ok.Looks like it might be this issue:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801829e9.shtml#
Unable to connect to IPMA service with the http 503 error
You are unable to connect to IPMA service from assistant console and the http 503 error appears. The HTTP 503 error indicates a web issue that is related to tomcat service.
When you attempt to restart the Tomcat service, this error message appears that indicated an issue with CTI Manager:
Message from syslogd@FAURDEFRA01VS02 at Wed Jun 29 20:52:23 2011 ...
FAURDEFRA01VS02 local7 0 : 4: Jun 29 18:52:23.20 UTC :
%CCM_TOMCAT_APPS-JAVAAPPLICATIONS-0-IPMANotStarted: IPMA Application not
started Servlet Name:Cisco IP Manager Assistant Reason:Service failed to
go active. Provider is not a super provider App ID:Cisco Tomcat Cluster
ID: Node ID:FAURDEFRA01VS02
Solution
This issue occurs because the CTIManager is not configured on the IPMA service parameter. Choose Cisco Unified Serviceability > Tools > Control Center - Feature Services on CUCM and restart the Cisco CTIManager in order to resolve this issue. -
Error Message when Installing Itunes 9.0.1
When Installing Itunes 9.0.1 I received the following error message
"The systetm extension "/System/Library/Extensions/CDSDAudioCaptureSupport.Kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product'svendor for an update.
I don't know anything about this extension and would like some help finding out if I even need it.Sean,
Yes, this is a known defect: CSCue69477 - CTI Route Port Synch Issue with CUCM. As per the bug:
"This issue will occur if the "SUBSCRIBE Calling Search Space" under Protocol Specific Information in the Template for the CTI Route Ports is configured. To work around this, the "Owner User ID" under Device Information for the Template needs to be configured."
Regards,
Jason -
Error message when opening image or Preferences
I use an HP computer with 2 MB RAM and XP SP 3.
I have downloaded the trial version of CS4 twice, but in both cases I get an error message and the programme shuts down when I open an image (any type) or Preferences. My graphics card is Nvidea GeForce FX5700.
Any suggestions?Ok, I have trying with the drivers.
First i have uninstalled all the drivers and sofware of ATI. Without anything installed, photoshop works without problems with OpenGL power OF, and if you go to the performance preferences the application have to be close.
After installing Driver 8.11, photoshop works perfecly with OpenGL power ON.
After installing Catalyst Control Center 8.11 works with OpenGL power ON.
After rebooting the system works good but with the openGL power OF and if you go to performance preferences you have to close the application (the same message "the application doesn´t work, you have to close it...").
After installing driver and Catalyst Control Center 8.12 the same, works without OpenGL.
If I install ATI T200 Unified AVStream Driver photoshop doesn´t work good.
At the moment I have the program working properly but with OpenGL power OF. And i would like to activate it because i think my graphics card is very good and i would like the photoshop use it.
I hope my experience will help someone. -
Hello, i've been working with this issue for more than a week now. Have tried all the solutions on the net without any success.
Windows 7 home premium x64 is installed on the machine.
When trying to use any application using camera shows up a message, that webcam is used by another application. This pops up on Skype and Dell Webcamcentral. Ms Silverlight shows black screen, no message. The device is present under imaging devices in device manager. The driver installed is Microsoft 6/21/2006 ver. 6.1.7601.18208, status "device is working properly". Driver files: ksthunk.sys, usbvideo.sys and ctclsflt.sys after installing webcam central.
Here is what i tried:
1. Installing drivers from Dell.com in the correct order
2. Uninstalling webcam driver and letting windows install the driver from windows update.
3. Uninstalling windows driver and installing Quanta webcam driver before restart. Note, that in all 3 steps quanta driver never showed up in driver details in device manager.
4. Uninstalled skype.
4.Uninstalled all "usb root" in device manager, restarted, windows installed it's drivers, installed Dell_SX2210-Monitor_Webcam SW RC1.1_ R230103.
5. Uninstalled Webcamcentral, downloaded and installed ver 6.1 Skype.
6. Started windows in a clean boot state.
7. Installed process observer. Webcam is used only by skype, but skype gives "camera used by another app" error message.
8. Turned off laptop, removed ac power and battery, pressed power on button for 30 secs.
9. Tried to update driver through device manager - driver is up to date.
10. Reinstalled windows and installed chipset drivers + wireless drivers and let the windows update. Then installed all Dells drivers in the correct order.
11. Restored to the point before windows update and installed Dell drivers in the correct order.
12. Restored to the point after windows update again. Installed ms Silverlight, camera shows black screen. Room is light, tried a sheet of white paper close to the camera.
13. Tried different skype versions again, uninstalled skype.
14. Process observer shows that nothing uses webcam. Supportassist shows failure in webcam at all checkup stages. Supportassist suggests to turn of programs that might be using camera.
15. Tried all the steps before windows reinstall.
16. I gave up and ask for your help.
Here is Supportassist diagnostics log:
SupportAssist Log File
Sunday, April 12, 2015 6:42:12 PM
Overall Test Result: Failed
WEBCAM
Driver Provider:
Microsoft
Driver Version:
6.1.7601.18208, 6/21/2006
Capture To Screen Test
Test Started
4/12/2015 6:26:18 PM
Error Message:
Error creating the filter graph for rendering video.
4/12/2015 6:30:55 PM
Test Finished:
Failed (Error code: WWC02-7TM)
4/12/2015 6:30:55 PM
Capture To File Test
Test Started
4/12/2015 6:30:55 PM
Error Message:
Error creating the filter graph for rendering video.
4/12/2015 6:36:27 PM
Test Finished:
Failed (Error code: WWC01-XEI)
4/12/2015 6:36:27 PM
Edge Detection Test
Test Started
4/12/2015 6:36:28 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:36:58 PM
Test Finished:
Failed (Error code: WWC09-VFH)
4/12/2015 6:36:58 PM
Luminance Depth Test
Test Started
4/12/2015 6:36:58 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:37:28 PM
Test Finished:
Failed (Error code: WWC08-5TS)
4/12/2015 6:37:28 PM
RGB Channel Test
Test Started
4/12/2015 6:37:28 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:37:59 PM
Test Finished:
Failed (Error code: WWC05-OKO)
4/12/2015 6:37:59 PM
RGB Color Depth Test
Test Started
4/12/2015 6:37:59 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:38:29 PM
Test Finished:
Failed (Error code: WWC07-WLL)
4/12/2015 6:38:29 PM
RGB Line Amplifier Test
Test Started
4/12/2015 6:38:29 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:39:00 PM
Test Finished:
Failed (Error code: WWC06-IV1)
4/12/2015 6:39:00 PM
RGB Line Driver Test
Test Started
4/12/2015 6:39:00 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:39:30 PM
Test Finished:
Failed (Error code: WWC04-YMZ)
4/12/2015 6:39:30 PM
RGB Pixel Test
Test Started
4/12/2015 6:39:30 PM
Error Message:
Unable to capture video frames.
4/12/2015 6:40:00 PM
Test Finished:
Failed (Error code: WWC03-1VT)
4/12/2015 6:40:01 PM
System Summary
Product
Dell System XPS L502X
Service Tag
JQNQCT1
Express Service Code
429-708-457-81
Operating System
Operating System
Name
Microsoft Windows 7 Home Premium Edition (64-bit)
Service Pack
Service Pack 1
Build Number
7601
DirectX Version
11
Windows Directory
c:\windows
System Directory
c:\windows\system32
Maximum OS Memory
16.00 GB
System Name
INDRE-PC
User Name
Indre
Windows Experience Index
Base Score
5.9
Processor Subscore
7.5
Memory (RAM) Subscore
7.6
Graphics (Aero) Subscore
6.2
Gaming Graphics Subscore
6.2
Primary Disk Subscore
5.9
Assessment State
Valid Scores
Assessment Date
4/9/2015 7:23:35 AM
Windows Update
Automatic Updates
Automatic download and install
Last checked
2015-04-11 22:25:37
Security
Windows Update
Automatic Updates
Automatic download and install
Last checked
2015-04-11 22:25:37
Firewall - Windows Firewall
Windows Firewall Enabled
Yes
Motherboard
Manufacturer
Dell Inc.
Product
0NJT03
Chipset
Intel PCH HM67
ePPID
CN0NJT034864324S0399
BIOS
Vendor
Dell Inc.
Release Date
09/07/2012
BIOS Version String
A12
ROM Size
2.50 MB
SMBIOS
Version
2.6
ACPI Thermal Zones
TZ00
Current Temperature
65 C
TZ01
Current Temperature
65 C
Intel(R) Mobile Express Chipset SATA AHCI Controller
Interface
PCI
Location
PCI bus 0, device 31, function 2
Type
SATA Controller
Class
01h:06h:01h
PCI Identification
Vendor Name
Intel Corporation
Vendor ID
8086h
Device ID
1C03h
Revision
05h
Driver Provider
Intel
Driver Version
10.1.2.1004, 1-12-2011
Driver
c:\windows\system32\drivers\iastor.sys
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D
Interface
PCI
Location
PCI bus 0, device 26, function 0
Type
USB EHCI Controller (USB 2.0)
Class
0Ch:03h:20h
PCI Identification
Vendor Name
Intel Corporation
Vendor ID
8086h
Device ID
1C2Dh
Revision
05h
Driver Provider
Intel
Driver Version
9.2.0.1013, 9-16-2010
Driver
c:\windows\system32\drivers\usbehci.sys
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26
Interface
PCI
Location
PCI bus 0, device 29, function 0
Type
USB EHCI Controller (USB 2.0)
Class
0Ch:03h:20h
PCI Identification
Vendor Name
Intel Corporation
Vendor ID
8086h
Device ID
1C26h
Revision
05h
Driver Provider
Intel
Driver Version
9.2.0.1013, 9-16-2010
Driver
c:\windows\system32\drivers\usbehci.sys
Renesas Electronics USB 3.0 Host Controller
Interface
PCI Express x1
Location
PCI bus 4, device 0, function 0
Type
USB xHCI Controller (USB 3.0)
Class
0Ch:03h:30h
PCI Identification
Vendor Name
NEC Corporation
Vendor ID
1033h
Device ID
0194h
Revision
04h
Driver Provider
Renesas Electronics
Driver Version
2.1.27.0, 9-13-2011
Driver
c:\windows\system32\drivers\nusb3xhc.sys
Processors
Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz (CPU:0)
Name
Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
Cores
4
Threads
8
Signature
206A7h
Family
6h
Model
2Ah
Technology
32 nm
Temperature
66 C
Performance
Max Qualified Speed
2.20 GHz
Max Turbo Boost Speed
3.09 GHz
Current Speed
2.79 GHz
Multiplier
x 28.0 (8 - 22)
Max Turbo Boost Ratio
x 31
Bus Speed
99.78 MHz
Features
MMX, PSE36, EM64T, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AVX, AES, XD, VMX, IDA
Cache Summary
L1 Data Cache
4 x 32.00 kB
L1 Instruction Cache
4 x 32.00 kB
L2 Cache
4 x 256.00 kB
L3 Cache
6.00 MB
Core : 0
Temperature
65 C
Threads
2
Core : 1
Temperature
69 C
Threads
2
Core : 2
Temperature
67 C
Threads
2
Core : 3
Temperature
66 C
Threads
2
L1 Data Cache
Quantity
4
Level
L1
Type
Data
Size
32.00 kB
Associativity
8-Way Set-Associative
Line Size
64 bytes
L1 Instruction Cache
Quantity
4
Level
L1
Type
Instruction
Size
32.00 kB
Associativity
8-Way Set-Associative
Line Size
64 bytes
L2 Cache
Quantity
4
Level
L2
Type
Unified
Size
256.00 kB
Associativity
8-Way Set-Associative
Line Size
64 bytes
L3 Cache
Quantity
1
Level
L3
Type
Unified
Size
6.00 MB
Associativity
12-Way Set-Associative
Line Size
64 bytes
Memory
System Memory
Total Physical Memory
8.00 GB
Maximum Supported Memory
8.00 GB
Page Files
Total Size
7.90 GB
Page File c:\pagefile.sys
Location
c:\pagefile.sys
Size
7.90 GB
4096 MB DDR3 (1333 MHz)
Source
SMBIOS
Memory Size
4.00 GB
Memory Type
DDR3 (1333 MHz)
Memory Manufacturer
Hynix/Hyundai
Memory Part Number
HMT351S6CFR8C-H9
Memory Serial Number
3280B845
4096 MB DDR3 (1333 MHz)
Source
SMBIOS
Memory Size
4.00 GB
Memory Type
DDR3 (1333 MHz)
Memory Manufacturer
Kingston
Memory Part Number
9905428-045.A00LF
Memory Serial Number
3A2D9D10
Batteries
Main Battery
Battery Name
Dell
Manufacturer Name
SIMPLO
Type
LION - Lithium Ion
Battery Serial Number
1130
Designed Capacity Percentage
13
Current Charge Percentage
100
Current Charge
7.23 Wh
Full Charged Capacity
7.23 Wh
Designed Capacity
57.72 Wh
Voltage
12.41 V
Communications
Network Card - Intel(R) Centrino(R) Wireless-N 1030
Vendor Name
Intel Corporation
Serial Number
4C-EB-42-82-35-6B
Interface
PCI Express x1
MAC Address
4c:eb:42:82:35:6b
Adapter Connected
Yes
Current Speed
117.00 Mbps
IP Address
192.168.0.129
IP Mask
255.255.255.0
Gateway IP Address
192.168.0.1
DHCP Server
192.168.0.1
Adapter DHCP Enabled
Yes
Driver Provider
Intel
Driver VIqb,
Make a system restore point.
Start, control panel, device manager, Go to the USB Controller section and click the + sign. Go to each USB Root Hub. right click on it, left click uninstall.
Restart your computer. When you login, the new hardware wizard will reinstall everything. Please be patient, it could take up to 2 minutes.
Try the webcam and see if it works.
If no, then the webcam became detached from the motherboard, usually near the webcam
Rick -
Estreamer generates error messages for "Failed to deserialize RUA Event"
Estreamer service on 3D System generates the following error messages for user activity data:
EventStreamer child(qradar.as.local):ConnectionHandler [ERROR] Failed to deserialize RUA Event 1004:1This is a known issue. This issue is fixed on software version 5.2.0.3. Upgrading your 3D System to latest software version will fix this issue.
Note: Once the 5.2.0.3 patch is installed, you may still receive the RUA Deserialize error if the Defense Center contains older unified files prior to the 5.2.0.3 patch. Contact Technical Support for assistance in removing the older unified files. -
Imac spontaneously turns off and restarts with error message
Any help would be appreciated. Started yesterday. Already booted in safe mode and reinstalled using time machine to before it started to happen. This is the error message:
Interval Since Last Panic Report: 223748 sec
Panics Since Last Report: 1
Anonymous UUID: 4BFE30DA-BB47-97F2-BCA7-E31FAAE8DF9A
Wed Oct 2 17:35:28 2013
panic(cpu 2 caller 0xffffff802b2fa591): "hfs_UNswap_BTNode: invalid backward link (0x00013ad5 == 0x00013ad5)\n"@/SourceCache/xnu/xnu-2050.48.11/bsd/hfs/hfs_endian.c:297
Backtrace (CPU 2), Frame : Return Address
0xffffff811ce532b0 : 0xffffff802b01d636
0xffffff811ce53320 : 0xffffff802b2fa591
0xffffff811ce53370 : 0xffffff802b2ef474
0xffffff811ce533b0 : 0xffffff802b12160a
0xffffff811ce534a0 : 0xffffff802b11e5b3
0xffffff811ce53550 : 0xffffff802b120c7f
0xffffff811ce535a0 : 0xffffff802b31909f
0xffffff811ce535d0 : 0xffffff802b31d1e6
0xffffff811ce53640 : 0xffffff802b304138
0xffffff811ce536e0 : 0xffffff802b1190e4
0xffffff811ce53750 : 0xffffff802b351c19
0xffffff811ce53f50 : 0xffffff802b3e97ba
0xffffff811ce53fb0 : 0xffffff802b0cf453
BSD process name corresponding to current thread: mds
Mac OS version:
12F37
Kernel version:
Darwin Kernel Version 12.5.0: Mon Jul 29 16:33:49 PDT 2013; root:xnu-2050.48.11~1/RELEASE_X86_64
Kernel UUID: B1B58405-A2B2-3C44-B25D-495053D52AB5
Kernel slide: 0x000000002ae00000
Kernel text base: 0xffffff802b000000
System model name: iMac13,2 (Mac-FC02E91DDD3FA6A4)
System uptime in nanoseconds: 755668164542
last loaded kext at 293671024990: com.apple.filesystems.afpfs 10.0 (addr 0xffffff7fad27b000, size 348160)
last unloaded kext at 422819023524: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7fac8f5000, size 57344)
loaded kexts:
com.Logitech.Unifying.HID Driver 1.2.0
com.Logitech.Control Center.HID Driver 3.6.0
com.apple.filesystems.afpfs 10.0
com.apple.nke.asp_tcp 7.1.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AGPM 100.13.12
com.apple.driver.ApplePlatformEnabler 2.0.7d2
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.12
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.iokit.IOBluetoothSerialManager 4.1.7f2
com.apple.GeForce 8.1.6
com.apple.driver.AppleIntelHD4000Graphics 8.1.6
com.apple.driver.AppleHDA 2.4.7fc2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.4.7fc2
com.apple.driver.AppleBacklight 170.3.5
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.1.7f2
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AirPort.Brcm4331 615.20.17
com.apple.driver.AppleSMBusPCI 1.0.11d1
com.apple.driver.AppleLPC 1.6.3
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleIntelFramebufferCapri 8.1.6
com.apple.iokit.AppleBCM5701Ethernet 3.6.2b4
com.apple.filesystems.autofs 3.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.5
com.apple.driver.AppleUSBHub 623.4.4
com.apple.driver.AppleSDXC 1.4.3
com.apple.driver.AppleAHCIPort 2.6.6
com.apple.driver.AppleUSBEHCI 621.4.6
com.apple.driver.AppleUSBXHCI 630.4.5
com.apple.driver.AppleACPIButtons 1.8
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.8
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
com.apple.security.SecureRemotePassword 1.0
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.nvidia.gk100hal 8.1.6
com.apple.NVDAResman 8.1.6
com.apple.iokit.IOAcceleratorFamily 74.15
com.apple.driver.DspFuncLib 2.4.7fc2
com.apple.iokit.IOAudioFamily 1.9.2fc7
com.apple.kext.OSvKernDSPLib 1.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f2
com.apple.driver.AppleHDAController 2.4.7fc2
com.apple.iokit.IOHDAFamily 2.4.7fc2
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.iokit.IO80211Family 530.5
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.5d4
com.apple.driver.IOPlatformPluginFamily 5.4.1d11
com.apple.driver.AppleThunderboltEDMSink 1.2.0
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
com.apple.driver.AppleThunderboltDPOutAdapter 2.5.0
com.apple.driver.AppleThunderboltDPInAdapter 2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.3.2
com.apple.driver.IOBluetoothHIDDriver 4.1.7f2
com.apple.iokit.IOBluetoothFamily 4.1.7f2
com.apple.iokit.IOUSBHIDDriver 623.4.0
com.apple.driver.AppleUSBMergeNub 621.4.6
com.apple.driver.AppleUSBComposite 621.4.0
com.apple.driver.AppleThunderboltNHI 1.9.2
com.apple.iokit.IOThunderboltFamily 2.7.7
com.apple.iokit.IOUSBUserClient 630.4.4
com.apple.iokit.IOAHCIFamily 2.5.1
com.apple.iokit.IOUSBFamily 630.4.5
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.8
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac13,2, BootROM IM131.010A.B05, 4 processors, Intel Core i5, 3.2 GHz, 8 GB, SMC 2.11f14
Graphics: NVIDIA GeForce GTX 675MX, NVIDIA GeForce GTX 675MX, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455352D474E2D4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455352D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF4), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.7f2 12718, 3 service, 21 devices, 3 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: APPLE HDD WDC WD10EALX-408EA0, 1 TB
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52b, 0x14300000 / 1
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8511, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2412, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x828b, 0x1d181300 / 6Boot into Recovery mode, launch Disk Utility, select the startup volume ("Macintosh HD," unless you gave it a different name), and run Repair Disk (not Repair Permissions.) If any problems are found, repeat. Then reboot as usual.
If you don't already have a current backup, you must back up your data, if possible, before you take the above step. You may be able to back up, even if the system isn't bootable. Ask if you need guidance. -
Dear support,
as we are uing ipcc system Cisco Application Administration - 7.0(1)_Build168 Package: Cisco Unified CCX Enhanced
when user dial service desk number after working hours must be transfer to mobile but its not working
user hearing the pop up welcome message after then user hearing the ringing then user hear the
error message i.e I'm sorry we are currenty experiencing system problems and are unable to process your call.
so please advice ....
regards
syedBefore you perform a reactive debug, I suggest you practice on a non production script.
The first thing you will need to do is, open the CRS Script Editor and log in. You cannot Reactive Debug if you're not logged in and connected to the UCCX server.
Next, press CRTL+Shift+R to open the reactive debug dialog.
Select the script name from the list for the script you are troublehsooting.
Select how long you want the system to wait for the next call before cancelling the debugger.
Press OK
Place a call into the script.
At this point a script window should open and the Start step should be highlighted in red.
Press F10 to step through the script, step by step, analyzing what's happening.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches. -
PUG "Temp Fail" Error message....
Hi there guys,
I am having a problem at one of our sites using CUCM 8.5..... there are 2 pick up groups at the site and about 8 users in each group... if a call comes in on a handset, a "temp fail" error message is displayed on any handset that attempts to use the pickup softkey and an engaged tone.
The PUG's did work previously and they are complaining that this has recently just become a problem.. so I am pretty confident that the comnfig on CUCM is all correct and have checked it over and it all seems fine...
What else can I look at to try and get this resolved?Hi,
The Temp Fail message refers to a network or connectivity problem, usually if the call is between 2 IP phones, one phone received an ICMP Unreachable from the other phone. If the call was PSTN/Ip phone, then the gateway lost communication with CallManager, probably the remote endpoint became unregistered.
You can use RTMT and check for the Syslogs in order to determine what is the disconnection reason.
You can also get a CUCM detailed trace to see what device got disconnected.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080094e89.shtml
Regards,
Tere.
If you find this post helpful, please rate! -
Windows Vista: Ipod Error Message, no longer read by PCs
Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com
-
Error message into a Variable.
Dear users,
I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
My requirement is like this:
I have a message class in which I want to define a text 'Employee number & not found'.
I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
lv_text = e0xx(messageclass) USING '1234' which stores the text 'Employee number 1234 not found' in lv_text.
How would I acheive it??
Thanks, V!Try tis way
message e999(00) with i_emp-empno into lv_text.
press f1 in message will provide you more details
a® -
IPod seen by windows, not by iTunes+ weird error message
I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
and why is there no email adress from apple for service qustions? 10xI still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
Did you read the document i linked you to? here's another link to it:
Putting iPod into Disk Mode
whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
... never mind ... i guess you've fixed it anyway ... -
Error message iPod cannot update b/c all of the playlists no longer exist
Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XPhiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b -
Windows Blue Screen Error Message Appears As Soon As IPod Connected
Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.
Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx
Maybe you are looking for
-
Scans using the Printer/Scanner utility in MAC OS 10.9 disappear.
Hello, I am having new issues with scanning documents on my HP Photosmart Premium Series C309 All-in-One printer/scanner. I have been able to successfully scan and save documents, but just recently, something happened. It appears the scanner is suc
-
Receiving Transaction Processor
Hi, I have inserted the data in RCV_headers_interface and RCV_transaction_interface and run the Receiving Transaction Processor program, no error in log file. The PROCESSING_STATUS_CODE column in the rcv_transactions_interface is updated as ' ERROR'.
-
I am having a problem installing the updated version of Itunes 10.3.1.55 on my laptop which uses Windows XP operating system. I have download the software from Apple's website and have successfully installed it. However, when I launch Itunes I get an
-
E-Recruiting - Mass upload of Attachment/Resume of Candidates
Hi, We already developed custom program to upload resumes/attachments of Candidates but still I want to check any standard approach is there to upload attachments. We have transferred Candidates (about 20K) from legacy to E-Recruiting (6.0) i.e. Cand
-
Music and videos stopped showing up
ok so i plugged in my ipt(16gb) today to dl new podcasts, i disconnect it and go to podcasts and nothings there. i go to music and all my music is gone, same with videos. however i plugged it back into my mac and it still says all the music and video