CUCM 8.6, UnityCon 8.6 and Presence 8.6 on ESXi 5 C200 web interface lag
When trying to bring up any web interfaces or even vSphere it is so slow as to also not be usable.. Brand new install on 2 C200 UCS servers.
Before you ask. Yes LRO is disabled according to Cisco's instructions and confirmed. I have CUCM and Presence on one NIC and Unity Con by itself on the other NIC.
Restarting Tomcat does nothing to help..
Even restarting the entire cluster does nothing to help..
All 6 machine Pubs and Subs of each application type were created in ESXi 5 with .ova files and unchanged.
Sent from Cisco Technical Support iPad App
Update!!!!
All lag stops if I turn off the presence subscriber!?!?!?!?!?
What the heck..
Hi mate,
What does RTMT or CLI show about CPU memory and process usage?
Probably should not affect GUI but is correct VMware tools installed as well?
Once you verify apps check what VMware says about performance.
What size ovas did you use? Are you over subscribed?
How long have you waited? Is it just cups performing sync and hogging resources for example
Cheers,
Tim
Sent from Cisco Technical Support iPad App
Similar Messages
-
Install and configure AIR-SAP1602E-A-K9 via web interface
While setting up the AIR-SAP1602E-A-K9 using a web browser, the AP managed to take the IP address of another device.
You will need some type of software to find out what is on your network or be able to get into your router and access the DHCP list and see what is new. Once you know the IP you can access the AP.Please check the below link which can helpful:
http://www.cisco.com/en/US/docs/wireless/access_point/1600/quick/guide/ap1600getstart.pdf -
Hi community,
I am trying to integrate Cisco Unified Presence 8.6.1.10000-34 with IBM Lotus Notes 8.5.2 with the integrated Sametime Client version 8.0.2 via the Cisco Plugins 8.6.1.1185.
Phone control is working fine, whereas the presence status is not shown (= no handset symbol next to the Sametime user). When I look in the preferences of the plugin, I can see that the plugin has connected successfully to the CUCM (8.6.2.20000-2),whereas the connection to the CUPS has not been established.
The user id as well as the password are all the same on all systems. Here is a description of what I have configured via the ciscocfg.exe tool:
Feature Control:
- Enable Phone Status -> checked
- Enable Dial Using Cisco IP Communicator -> unchecked (not required)
- Enable Control Desk Phone -> checked
- Default Mode -> Control Desk Phone
Control Desk Phone Settings:
- Voicemail Pilot Number -> left blank (no voicemail)
- Cisco Unified Communications Manager
- Servers -> IP address of CUCM
- Read Only -> unchecked
- Use as Default CUCM -> checked
- Synchronize Credentials -> checked
- Use Sametime Credentials -> checked
Use Secure Connection: -> not required
LDAP Phone Attributes: -> not required
Phone Status Settings:
- Cisco Unified Presence Servers -> IP address of CUPS
- Read Only -> unchecked
- Synchronize Credentials -> checked
- Use Sametime Credentials -> checked
- Sametime User ID Mapping
- Use Business Card Attribute -> MailAddress
- Remove Domain -> checked
- Display Off-Hook Status Only -> unchecked
At the moment I don't see an error in the configuration, but maybe I am wrong. Could anyone please tell me what the error could be?
Thanks a lot in advance!
Kind regards,
IgorHi all,
here are some additions to my above post:
Servers and clients used:
1x CUCM 8.6.2.20000-2
1x CUPS 8.6.1.10000-34
1x IBM Lotus Domino Messaging Express Server 8.5.2
1x Sametime Entry Server 8.5.2 (on top of the Domino server)
2x IBM Lotus Notes 8.5.2 with integrated Sametime 8.0.2
2x Cisco Phone Control and Presence with Lotus Sametime (PCAP) 8.6.1.1185
2x Cisco Unified Personal Communicator 8.5.5.19839
Setup:
- CUCM, CUPS and CUPC are working fine, i.e. Desk Phone control via CUPC, as well as availability and presence status are working without issues
- IBM Lotus Domino server is the LDAP Directory, the Sametime Entry Server is installed on top of the Domino server and uses the Domino Directory
- User ID and password on CUCM/CUPS match the ShortName field and password in Domino
- The PCAP plug-in has been manually deployed to both Notes clients with the following configuration:
- Enable Phone Status -> active
- Desk Phone Control -> active
- no credential synchronization for CUCM and CUPS, i.e. every user must fill the user details himself
- Sametime User ID Mapping is implemented via the LDAP Attribute uid (which is equal to the user id in CUCM)
- LDAP configuration filled in with details of the Domino server
Phone Control is working fine, also the connection to the LDAP server (Domino) is fine. However, when I type in the credentials for the CUPS server login, I can see (in Troubleshooting pane) that the user (pparker) is connected to the CUPS server for a short period of time and then gets disconnected. After that no connection is possible to the CUPS server, i.e. status is always disconnected.
I have collected the Tomcat (EPASSoap00010.log and security00010.log) logs via RTMT and compared them to the logs from the PCAP plugin. The relevant time period is from 15:14 to 15:17. In the Tomcat logs I can see that the authentication is successful (see attached files), however in the log of PCAP plugin I can see the following messages:
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
I don't understand why the connection is rejected although the Sametime Internal ID and CUPS User ID match. Does anyone know what the issue could be?
All posts are very much appreciated!
Thanks a lot in advance!
Kind regards,
Igor -
Hello All,
Company A – Using Cisco IM and Presence
Company B – Using Microsoft Lync 2010
We would like to establish federation between Company A and Company B and also looking for the documentation which has the step by step instruction.
Please let us know overall steps or provide us the documentation. Thank you in advance.
ThanksFor Federation between Lync and Cisco IM, you can check below link and this
document
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/9_0_1/CUP0_BK_IAAE17D8_00_integration-guide-interdomain-federation-90/CUP0_BK_IAAE17D8_00_integration-guide-interdomain-federation-90_chapter_01.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Role of Cisco IM and Presence Server
Hey Guys,
I am yet to work on 9.x. On the Cisco site it says all features of CUP has been integrated to CUCM 9.x. Does this mean to deploy Windows Jabber I dont require IM and Presence/CUPS ?
Thanks
Varadarajan.RNo, you still need to deploy the IM&P server, that just means that most of the config has been moved over to CUCMadmin, at least regarding Jabber/CUPC
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk -
UCCX 10.5 finesse desktop + email and presence
Hi all,
We have recently upgraded to UCCX 10.5 and I'm playing around with finesse desktop.
Has anyone setup a widget for email yet? I cant find any documentation that would detail how to do this.
Similarly , in the CAD version - you had chat to other agents, as well integration with CUP server for non-agents presence - has anyone found a widget to get this added?
Thanks
ElenaTry to take a look at the 2Ring Finesse Gadgets. They have all what you are seeking regarding chat and presence
Regards
Ulrik -
Hi,
can anyone please advise what are the implications , if any, of increasing the number of watchers on the IM and Presence server from its default value. We have a few users that have reached the max limit (200) thats been set.
thanks,
JeffJust go to the device config and the load ID will show the version.
-
Click to Call and Presence Options with Sharepoint
Hi everyone,
What options are there for providing click to call (CTC) and presence with Sharepoint? I have the following options (and thoughts) so far.
Deploy CUPC (Not going to happen, we're happily a Lync 2010 house but would provide CTC and unsure about presence for sharepoint)
Deploy CUCILync (Seems overkill, but would provide CTC and presence)
Deploy CUPS and use RCC via Lync (I keep on hearing that RCC was meant to be killed off in Lync 2010 and probably won't exist in future. Would provide CTC, unsure about presence)
Deploy click to call widget (Would be great to avoid another desktop application. Would only provide CTC)
Deploy Quad (Don't expect the Sharepoint guys buying in to that one...)
Use WebDialer API (Sounds like it would provide CTC)
Use existing JTAPI integration (This should be a given... Provides CTC and presence).
We currently have an existing Intranet, which provides click to call abilities/phone presence information using JTAPI. A team is completing a Sharepoint proof of concept and the question has come up how they can complete click-to-call and phone presence.
Thanks,
MarkThe first suggest to fix this error is to make sure that CIPC is running properly and that
a phone is selected to use with the Click to Call application.
This message is often presented unnecessarily when the ser invokes Click to Call but has not
entered their username and password into Click to Call Preferences then the user is
presented with the error "Click to Call cannot find Cisco IP Communicator. Please ensure
it is running or select another phone." rather than "Click to Call is not fully
configured."
If you have configured the user options correctly then you need to check the Click to Call log
files to try and diagnose the problem you're having. They are located at:
* Windows XP - C:\Documents and Settings\[Windows User Account Name]\Application
Data\Cisco\Click to Call\Log
* Windows Vista - C:\Users\[Windows User Account Name]\AppData\Roaming\Cisco\Click
to Call\Log
Please rate all useful posts -
Cisco Unified Connection Manager IM and Presence installation fails
Hello everyone, we are trying to install laboratory uses the Cisco Unified Connection Manager IM and Presence version10.The installation fails after a warning where there is a popup that asks if it is the first node of the configuration.From the installation manual is not clear if this product should be installed in a cluster architecture (publisher-subscriber).What should be the steps to follow?
Something has to be done on the server where we have installed theCisco Unified Connection Manager?
In attachement the screenshot with popup.
Thanks in advance
Oronzo LezziHi!
Hello everyone, we are trying to install laboratory uses the Cisco Unified Connection Manager IM and Presence version10.The installation fails after a warning where there is a popup that asks if it is the first node of the configuration .
What should be the steps to follow? vSwitch and ESXi config
1) cisco call manager installed as a publisher.
2) cisco unified connection manager IM & presence add as a subscriber or publisher. -
Restrict IM and presence in CUPS / CUPC
I have three groups of users such as Users1, Users2, and Users 3. I want to restrict who can IM and see the presence status of those user groups. Users1 should see everyone. Users2 should only see other people that are members of Users2 and Users 3 should only see members of users 3. Is it possible to restrict this using CUPC and CUPS version 7.x? Does the subscribe CSS and presence group restrict this ability?
Thank you for the quick response. What about this setup. IF I had three different OU’s in the LDAP that the CUPC users were configured for. Say OU=Users1 , OU=Users2 and OU=Users3 so the full path would be OU=Users1,DC=Company,DC=Local for each OU. Now in CUPS I set each users LDAP profile to only search within their OU. If they cannot see the other users via LDAP they should not be able to IM or see their presence. Would this work? I was going to lab it up next week and test it.
-
Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan FoleyThank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. -
My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fe network. I have reset the network settings and still Safari will not open any web pages. Help!
Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding". I am not able to connect with anything on the Internet. Frustrating since I am able to connect with my laptop. Thanks for the suggestion.
-
I am a innkeeper at a bed and breakfast. we use a third party web reservation site. is there any way i can link this website to my calendar to where all web bookings will be uploaded to my calendar. i have the most recent software on my mac
Hi,
Does the website have a WebDAV feed of their calendar?
John M -
We are evaluating the use of iPod touch devices to record best practice videos on our manufacturing floor and to post to an internal Moodle web site. How can you upload a video from the iPod touch to a site other than YouTube? The Moodle upload interface is expecting a file selection dialog box like windows or OSX. I do not want to have to go through an intermediary step of messing with a pc.
Thanks!It should be around 7 and a half gigs. In iTunes, across the bottom there should be a bar that show how much storage is being used and by what. (music, movies, apps, etc.) To make music take up less room, you can check the box to make it convert the music to 128kbps AAC. This lowers the quality, but with most earbuds and speakers, you can't even tell the difference.
The iPod touch has parental controls built in. You'll find them in Settings. I think they only work for enabling/disabling Safari, Mail, YouTube, and App Store. Here's an app that does more: http://www.mobicip.com/online_safety/ipod_touch -
SharePoint 2013 and IE 11 issue - While creating a Web Part Page and Editing Web Part Properties
I tried to edit a Web Part in SharePoint 2013 using IE 11 but I did not see the Edit Eeb Part dropdown menu at the top-right corner of the web part. Then I tried to create a Web Part page and I get the following error.
Cannot create a Web Part Page with the current browser. Browsers that support the creation of Web Part Pages include Microsoft Internet Explorer 7.0 or later, Mozilla Firefox 3.0 or later, and Apple Safari 3.0 or later
Strange !!! My web browser is IE 11.
I tried the above two tasks in Google Chrome and worked fine.
Solution:
I added the site url to local intranet zone in IE 11 and I am now able to add Web Part Page and Edit Web Part in IE 11.
imd.netHi - One more solution is to add SharePoint site to compatibility group:
http://blog.fpweb.net/sharepoint-internet-explorer-compatibility-issues-with-video/#.VAaZSPmSyy4
-prs
Maybe you are looking for
-
I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, t
-
How to get the actual page cordinate a field
I have 2 content areas CA1, CA2. CA1 is filled with dynamic table..which will flow into multiple page..at the end of the table I want the signature ..The signature has to be upper half of the page..since contents of the table are dynamic..it could be
-
AR aging report--from transaction date
Hi Presently the 7/4 bucket aging report shows current and invoices no of days past due i.e. 31 days due past due date. Is there a report or any way by which this aging report can be generated to show aging from transaction date. Thanks Ninad
-
Dependencies visible in Web UI for Data Cleansing
Hi All, My client is using the functionality Data Cleansing and we are implementing CRM 2007. As of CRM 2007 we now have two variants in BUSWU02 - CLEARING and CLEAR_REP. The dependencies(objects) defined in CLEARING are visible in the web UI. and ob
-
White screen after bootcamp and no further reaction--- HELP
I started bootcamp and used a disk with windows XP professional. i think selected the C partition (it was the only one) and windows started installing. after 20 minutes it ended and said windows wasn't installed and everything went white. can't do an