CUCM 8.6 update to CUCM 10.5
Hii,
I have 2 UCS from Cisco with 3 virtual machine ( 1 PUB - 1 SUB - 1 VoiceMail)
I will write the steps in order to make the upgrade, pls write if I miss something or I am wrong.
1. I will update on cucm8.6 all the device to firmware supported in cucm 10.5
2. Prepare the Cluster for downgrade ( true)
3. Make a back-up of the database
4. Write the Service activation in Pub/Sub
5. Update the Pub ( no restart) then update Sub ( no restart). After i go to PUB ( restart) then Pub (restart)
My question is where can I find some information (steps/checklist) in order to be prepared for worst case scenarios and if my steps are ok for migration.
Or to make a clone of my Pub and moved to another Vlan and Power on and do the upgrade and add some device to see if everything works fin???
Thanks a lot for REPLAY
Mark (+5)
Two things to comment on in the steps highlighted above..
3.If it says there is not enough room on the common partition then apply
ciscocm.free_common_space_v1.1.cop.sgn then back to step 2.
+++++
This should not be the first option if you get a not enough space error. This is because this COP file wipes out your previous CUCM version. Hence you will not be able to switch back to your old version of CUCM. For me in a production environment, that is a HUGE risk.
There are other measures that can be taken to free up more space in the common partition. One of such is deleting log files and the other is reducing the amount of traces on the system by lowering the low and high watermarks in the Cisco Log Partition Monitoring Tool.
+++++
6.If not backup,create new vm using cucm_10.5_vmv8_v1.8.ova and restore
+++++
It looks like there is a need to build a new VM using 10.5 ova even if partition is aligned. This is because the requirement for CUCM10.5 is " 1 (110GB)vdisk" whereas 8.6 runs on 2 (80GB) vdisk"
Since there is no way to re-size the disk size, it looks like the only way to achive the vdisk requirement is to rebuild the VM. I am not sure Cisco will support a 10.5 VM running with two 80GB vdisk.
+++++
Similar Messages
-
Upgrade CUCM 7.1.2 to CUCM 7.1.3
Hi I have thinking about upgrading my CUCM 7.1.2 to CUCM version 7.1.3.
Are there any inconvenient of make it? I will obtain some benefits with this upgrade or I will obtain some inconvenients?
Is it a good idea upgrading this version?
Thanks,
FranHi,
If you going for the upgrade u will get some benefits, for that u can go through SRND, release notes etc... there u can see the what is the additional features added in the 7.1.3.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/docguide/7_1_3/dg713.html
Cisco Unified Communications Manager Software Compatibility Matrix
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html
Cisco Unified Communications Manager Documentation Guide for Release 7.1(3)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/docguide/7_1_3/dg713.html -
CUCM 6.1 DirSync and CUCM trash collector program
If I turn on DirSync and CUCM syncs LDAP data to CUCM but I then turn off DirSync before the trash collector program runs will my original user data be there in the CUCM corp directory?
Peter,
Right on.
So what you are saying is that if I enable DirSync and allow the sync to happen and I don't like the results I can disable DirSync before the garbage collector program runs and my original CUCM User database data will be available again?
The main thing I was trying to determine is if DirSync is enabled and the actual sync process happens does it permanently alter my CUCM User database at that point even before the garbage collector program runs.
Somebody pointed me to the correct documentation for "Cisco Unified Communications Solution Reference Network Design (SRND)
Based on Cisco Unified Communications Manager Release 6.x"
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/uc6_0.html
It includes some really thorough information on LDAP Directory Integration.
I am currently reading through the details.
Man I wish I had found this from the start it would have saved me a lot of time and questions! :) -
Problem in upgrading from CUCM 8.5.1 to CUCM 8.6.2
Unable to upgarde cucm 8.5 to 8.6 ,
installed referesh upgrade cop file . tried on SFTP and using local DVD same below error displayed . Any one have any solution please share .
Installation Status
File
UCSInstall_UCOS_8.6.2.21900-5.sgn.iso
Start Time
Mon Dec 10 14:31:47 GST 2013
Status
Error encountered: An unknown error occurred while accessing the upgrade file.
12/10/2013 13:44:37 file_list.sh|Starting file_list.sh|<LVL::Info>
12/10/2013 13:44:37 file_list.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument dest_file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:37 file_list.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:44:37 file_list.sh|Calling SFTP command with metering off|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|SFTP command complete (0)|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|List file (pre-filtered):|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|(CAPTURE) UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|(CAPTURE) ciscocm.refresh_upgrade_v1.1.cop.sgn|<LVL::Debug>
12/10/2013 13:44:38 file_list.sh|/opt/cisco/install/bin/filter file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:38 filter|Parse argument file=/var/log/install/downloaded_versions|<LVL::Debug>
12/10/2013 13:44:38 filter|No patch type specified. Optional.|<LVL::Debug>
12/10/2013 13:44:38 filter|No upgrade mode specifed. Optional.|<LVL::Debug>
12/10/2013 13:44:43 filter|Processing filter candidate names|<LVL::Debug>
12/10/2013 13:44:43 filter|Process "UCSInstall_UCOS_8.6.2.21900-5.sgn.iso"|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter|INorOUT=IN UCSInstall_UCOS_8.6.2.21900-5.sgn.iso: Filter passed.|<LVL::Debug>
12/10/2013 13:44:43 filter|Process "ciscocm.refresh_upgrade_v1.1.cop.sgn"|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern Signed Standard upgrade patch file (UCSInstall_UCOS_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:43 filter| Match against patch pattern (UCSInstall_UCOS_UNRST_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_UNRST_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against es pattern (UCSInstall_UCOS_UNRST_ES[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_UNRST_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against su pattern (UCSInstall_UCOS_UNRST_SU[0-9]*_[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.sgn.iso)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (dp-ffr.[1-9]-[0-9]-[0-9]+.*.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (dp-ffr.[1-9]-[0-9]-[0-9]+.*.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cm-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cm-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (po-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (po-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-devicepack[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-devicepack[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-.*\.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (cmterm-.*\.cop\.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (uc-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (uc-locale-.*_.*-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:44 filter| Match against cop pattern (uc-friendly-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop)|<LVL::Debug>
12/10/2013 13:44:45 filter| Match against cop pattern (uc-friendly-[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+-[0-9]+.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:45 filter| Match against cop pattern (ciscocm..*.cop)|<LVL::Debug>
12/10/2013 13:44:45 filter| Match against cop pattern (ciscocm..*.cop.sgn)|<LVL::Debug>
12/10/2013 13:44:45 filter|INorOUT=IN ciscocm.refresh_upgrade_v1.1.cop.sgn: Filter passed.|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|List file (post-filtered):|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <?xml version="1.0" encoding="UTF-8"?>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallList>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallItem type="patch" secure-file="UCSInstall_UCOS_8.6.2.21900-5.sgn.iso" version="8.6.2.21900-5" file="UCSInstall_UCOS_8.6.2.21900-5.sgn.iso" reboot="no" signed="yes"/>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) <InstallItem type="cop" secure-file="ciscocm.refresh_upgrade_v1.1.cop.sgn" version="0.0.0.0-0" file="ciscocm.refresh_upgrade_v1.1.cop" reboot="no" signed="yes"/>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|(CAPTURE) </InstallList>|<LVL::Debug>
12/10/2013 13:44:45 file_list.sh|success|<LVL::Info>
12/10/2013 13:44:45 file_list.sh|file_list.sh complete (rc=0)|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Starting upgrade_validate_file.sh|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_type=patch|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Parse argument file_signed=yes|<LVL::Debug>
12/10/2013 13:44:53 upgrade_validate_file.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:44:53 upgrade_validate_file.sh|Get //UCSInstall_UCOS_8.6.2.21900-5.sgn.iso size via sftp|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Size of file obtained from sftp is 4793341952|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Total space needed is 9586683904|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Check free space|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|There is enough space on device to proceed.|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|(CAPTURE) Free space : 25916985344|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|(CAPTURE) Space needed : 19827077120|<LVL::Debug>
12/10/2013 13:44:54 upgrade_validate_file.sh|Remote SFTP request complete (0)|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|success|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|upgrade_validate_file.sh complete (rc=0)|<LVL::Info>
12/10/2013 13:44:54 upgrade_validate_file.sh|Unmount DVD|<LVL::Info>
12/10/2013 13:44:57 upgrade_get_file.sh|Starting upgrade_get_file.sh|<LVL::Info>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument method=remote_sftp|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument source_dir=/|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument dest_dir=/common/download/|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument remote_host=10.2.102.68|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument user_name=cisco|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument version=8.6.2.21900-5|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_type=patch|<LVL::Debug>
12/10/2013 13:44:57 upgrade_get_file.sh|Parse argument file_signed=yes|<LVL::Debug>
12/10/2013 13:45:08 upgrade_get_file.sh|Process remote SFTP request|<LVL::Info>
12/10/2013 13:45:08 upgrade_get_file.sh|source_dir=/, dest_file=/common/download//UCSInstall_UCOS_8.6.2.21900-5.sgn.iso, file_name=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 13:45:08 upgrade_get_file.sh|Starting SFTP|<LVL::Debug>
12/10/2013 14:29:34 upgrade_get_file.sh|Mount /common/download//UCSInstall_UCOS_8.6.2.21900-5.sgn.iso on /mnt/source|<LVL::Info>
12/10/2013 14:29:34 upgrade_get_file.sh|Download of iso file RTMTStart|<LVL::Notice>
12/10/2013 14:29:34 upgrade_get_file.sh|Create md5 "/common/download/UCSInstall_UCOS_8.6.2.21900-5.sgn.iso.md5"|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|MD5(/common/download/UCSInstall_UCOS_8.6.2.21900-5.sgn.iso)= e8:da:df:9a:3a:61:ee:27:4d:c5:4f:7b:77:78:bc:f1|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Create md5 complete|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|Authenticate file "/common/download/8.6.2.21900-5/checksum_file.sgn"|<LVL::Info>
12/10/2013 14:30:49 upgrade_get_file.sh|File authentication complete|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|authenticating ISO name, filename=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso, isoname=UCSInstall_UCOS_8.6.2.21900-5.sgn.iso|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Download of iso file RTMTFinish|<LVL::Notice>
12/10/2013 14:30:49 upgrade_get_file.sh|Checking for preflight script|<LVL::Debug>
12/10/2013 14:30:49 upgrade_get_file.sh|Executing preflight script: /mnt/source/Cisco/install/bin/preflight isolocation=/mnt/source|<LVL::Info>
12/10/2013 14:30:49 preflight|Starting preflight|<LVL::Info>
12/10/2013 14:30:49 preflight|Validate preflight data|<LVL::Info>
12/10/2013 14:30:49 preflight|Preflight data validation complete|<LVL::Info>
12/10/2013 14:30:49 preflight|Determine upgrade type|<LVL::Info>
12/10/2013 14:30:50 preflight|Active RH version = 4AS|<LVL::Debug>
12/10/2013 14:30:50 preflight|New os version(xml) = 5Server|<LVL::Debug>
12/10/2013 14:30:50 preflight|HW model = VMware|<LVL::Debug>
12/10/2013 14:30:50 preflight|Upgrade type = RU|<LVL::Debug>
12/10/2013 14:30:50 preflight|Obtain product type|<LVL::Info>
12/10/2013 14:30:53 preflight|Obtained product type CallManager|<LVL::Info>
12/10/2013 14:30:53 preflight|Processing preflight install mode|<LVL::Info>
12/10/2013 14:30:53 preflight|Set preflight cancel utility|<LVL::Info>
12/10/2013 14:30:53 preflight|Execute install preflight commands for CallManager:RU from /mnt/source/Cisco/install/preflight.xml|<LVL::Info>
12/10/2013 14:30:53 preflight|Found 10 preflight commands to execute|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (1/10): mkdir -p /common/preflight/CM/RU|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (2/10): cp -f /usr/local/platform/conf/dynamicConfig.xml /common/preflight/CM/RU/dynamicConfig.xml|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 1|<LVL::Debug>
12/10/2013 14:30:53 preflight|(CAPTURE) cp: cannot stat `/usr/local/platform/conf/dynamicConfig.xml': No such file or directory|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command did not complete (1). Continuing command processing...|<LVL::Warn>
12/10/2013 14:30:53 preflight|Execute preflight command (3/10): cp -f /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp /common/preflight/CM/RU/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 1|<LVL::Debug>
12/10/2013 14:30:53 preflight|(CAPTURE) cp: cannot stat `/usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp': No such file or directory|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command did not complete (1). Continuing command processing...|<LVL::Warn>
12/10/2013 14:30:53 preflight|Execute preflight command (4/10): cp -f /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/install-confirm-content.jsp /common/preflight/CM/RU/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (5/10): cp -f /mnt/source/Cisco/install/dynamicConfig_RU.xml /usr/local/platform/conf/dynamicConfig.xml|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (6/10): mkdir -p /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (7/10): cp -f /mnt/source/Cisco/install/dynamic_RU.jsp /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (8/10): cp -f /mnt/source/Cisco/install/install-confirm-content_RU.jsp /usr/local/thirdparty/jakarta-tomcat/webapps/cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:53 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:53 preflight|Execute preflight command (9/10): /mnt/source/Cisco/install/bin/tempDynamic.preflight /mnt/source/Cisco/install/dynamic_RU.jsp dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 starting tempDynamic.preflight...|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 Source dir/file = /mnt/source/Cisco/install/dynamic_RU.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:53 Destination file name = dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/dynamic_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/dynamic.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/dynamic.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 ... tempDynamic.preflight completed|<LVL::Debug>
12/10/2013 14:30:54 preflight|Execute preflight command (10/10): /mnt/source/Cisco/install/bin/tempDynamic.preflight /mnt/source/Cisco/install/install-confirm-content_RU.jsp install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|Preflight command returns 0|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 starting tempDynamic.preflight...|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Source dir/file = /mnt/source/Cisco/install/install-confirm-content_RU.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Destination file name = install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/1-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/2-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 Copying /mnt/source/Cisco/install/install-confirm-content_RU.jsp to /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 added/replaced /usr/local/thirdparty/jakarta-tomcat/temp/4-cmplatform/WEB-INF/pages/install/install-confirm-content.jsp successfully|<LVL::Debug>
12/10/2013 14:30:54 preflight|(CAPTURE) 12/10/2013 14:30:54 ... tempDynamic.preflight completed|<LVL::Debug>
12/10/2013 14:30:54 preflight|Exiting with result 0|<LVL::Info>
12/10/2013 14:30:54 upgrade_get_file.sh|preflight rc=0|<LVL::Debug>
12/10/2013 14:30:54 upgrade_get_file.sh|Preflight completed successfully|<LVL::Info>
12/10/2013 14:30:56 upgrade_get_file.sh|success|<LVL::Info>
12/10/2013 14:30:56 upgrade_get_file.sh|upgrade_get_file.sh complete (rc=0)|<LVL::Info>
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling active side processes
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling active side processes done
12/30/2014 14:31:49 sd_cancelInstall.sh|Canceling inactive side processes
12/30/2014 14:31:50 sd_cancelInstall.sh|Canceling inactive side processes done
12/10/2013 14:31:55 upgrade_install.sh|Starting Upgrade -- upgrade_install.sh|<LVL::Info>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument version=8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument dest_dir=/common/download/|<LVL::Debug>
12/10/2013 14:31:55 upgrade_install.sh|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|/usr/local/platform/bin/startcsa status|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|CSA Status = 0|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|(CAPTURE) Cisco Security Agent is running with pid 23124|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|CSA Status = 0|<LVL::Debug>
12/10/2013 14:31:59 upgrade_install.sh|/etc/init.d/ciscosec stop|<LVL::Debug>
12/10/2013 14:32:14 upgrade_install.sh|(CAPTURE) Stopping ciscosec: [ OK ]|<LVL::Debug>
12/10/2013 14:32:14 upgrade_install.sh|Upgrade the system|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Copy /mnt/source/Cisco/base_scripts/upgrade_manager.sh to /common/download/8.6.2.21900-5/upgrade_manager.sh|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Copy /mnt/source/Cisco/base_scripts/upgrade_manager.sh to /common/download/8.6.2.21900-5/upgrade_manager.sh complete|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|Start upgrade manager|<LVL::Info>
12/10/2013 14:32:14 upgrade_install.sh|/common/download/8.6.2.21900-5/upgrade_manager.sh type=upgrade basepath=/common/download/8.6.2.21900-5 file_name= logfile=/var/log/install/install_log_2013-12-30.13.44.35.log resultfile=/var/log/install/upgrade-results.xml work_dir=/var/log/install intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Cleanup data from a prior upgrade attempt|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any /grub/boot/grub/grub.conf.recovery|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Invalidate upgrade partition|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Clean up rpm any stale __db. files in rpmdb on the to side|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any master RPM from /partB|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Removing any /partB/etc/opt/cisco/install.conf|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Invalidate any product configuration file|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument type=upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument basepath=/common/download/8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument file_name=|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument logfile=/var/log/install/install_log_2013-12-30.13.44.35.log|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument resultfile=/var/log/install/upgrade-results.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Parse argument intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|upgrade_type="upgrade"|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|L2 upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initialize install support functions|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Calling "source /mnt/source/Cisco/install/bin/install_func"|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initialize install support functions complete|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Check for Refresh Upgrade|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Check if /mnt/source/upgradeConfig.xml exists|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Checking RedHat release version (4AS, 5Server)|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Initiate Refresh Upgrade|<LVL::Info>
12/10/2013 14:32:14 upgrade_manager.sh|Copy /mnt/source/Cisco/install/bin/refresh_upgrade to /common/download/8.6.2.21900-5/refresh_upgrade|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Check that /common/download/8.6.2.21900-5/refresh_upgrade exists and is executable|<LVL::Debug>
12/10/2013 14:32:14 upgrade_manager.sh|Calling exec /common/download/8.6.2.21900-5/refresh_upgrade type=upgrade basepath=/common/download/8.6.2.21900-5 file_name= logfile=/var/log/install/install_log_2013-12-30.13.44.35.log resultfile=/var/log/install/upgrade-results.xml work_dir=/var/log/install intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument type=upgrade|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument basepath=/common/download/8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument file_name=|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument logfile=/var/log/install/install_log_2013-12-30.13.44.35.log|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument resultfile=/var/log/install/upgrade-results.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument work_dir=/var/log/install|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Parse argument intf_file=/common/download/8.6.2.21900-5/upgrade_manager.xml|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|No 'to' version specified. Extracting it from base path.|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|NEW_VERSION updated to 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:32:14 refresh_upgrade|Refresh Upgrade Starting|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|IOWAIT monitor starting|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|Checksum the upgrade source on /mnt/source|<LVL::Info>
12/10/2013 14:32:14 refresh_upgrade|Calling sha1sum -c /common/download/8.6.2.21900-5/checksum_file|<LVL::Debug>
12/10/2013 14:34:14 refresh_upgrade|Checksum complete|<LVL::Info>
12/10/2013 14:34:14 refresh_upgrade|Initialize staging area|<LVL::Info>
12/10/2013 14:34:14 refresh_upgrade|Initialize globals for hard drive|<LVL::Debug>
12/10/2013 14:34:14 refresh_upgrade|Calling rm -rf /common/refresh_upgrade /common/component|<LVL::Debug>
12/10/2013 14:34:23 refresh_upgrade|Copy /mnt/source to /common/refresh_upgrade|<LVL::Info>
12/10/2013 14:34:23 refresh_upgrade|Execute find /mnt/source and cpio to /common/refresh_upgrade. This may take several minutes.|<LVL::Debug>
12/10/2013 14:37:31 refresh_upgrade|Copy source files to staging area complete|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Initialize staging area complete|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Prepare Refresh Upgrade support directory|<LVL::Info>
12/10/2013 14:37:31 refresh_upgrade|Make /common/mnt/product_img mount point|<LVL::Info>
12/10/2013 14:37:32 refresh_upgrade|Calling umount /common/mnt/product_img|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Setup support directories|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling rm -rf /common/download/8.6.2.21900-5/Cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling mkdir -p /common/download/8.6.2.21900-5/Cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Create /common/cisco link to /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling rm -rf /common/cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling ln -s /common/download/8.6.2.21900-5/Cisco /common/cisco|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Copy files from /common/refresh_upgrade/images/product.img to /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling mount /common/refresh_upgrade/images/product.img /common/mnt/product_img -o loop|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/iproduct.sh /common/download/8.6.2.21900-5/Cisco/bin/iproduct.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/ihardware.sh /common/download/8.6.2.21900-5/Cisco/bin/ihardware.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/ihistory.sh /common/download/8.6.2.21900-5/Cisco/bin/ihistory.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xproduct.sh /common/download/8.6.2.21900-5/Cisco/bin/xproduct.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xcomponent.sh /common/download/8.6.2.21900-5/Cisco/bin/xcomponent.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/xplatformconfig.sh /common/download/8.6.2.21900-5/Cisco/bin/xplatformconfig.sh|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/install_emailer /common/download/8.6.2.21900-5/Cisco/bin/install_emailer|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling cp -rf /common/mnt/product_img/bin/component_install /common/download/8.6.2.21900-5/Cisco/bin/component_install|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Calling umount /common/mnt/product_img|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|Setup install information in /common/download/8.6.2.21900-5/Cisco|<LVL::Info>
12/10/2013 14:37:33 refresh_upgrade|Calling ln -s /common/refresh_upgrade/Cisco/install /common/download/8.6.2.21900-5/Cisco/install|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) Mail notification cancelled - smtp server address for email not found! [/usr/local/platform/conf/platformConfig.xml]|<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:33 refresh_upgrade|(CAPTURE) |<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Setting up cisco specific enviroment|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|PATH=/common/download/8.6.2.21900-5/Cisco/bin:/usr/local/sbin:/sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/sbin:/home/sftpuser:/root/.security|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|LD_LIBRARY_PATH=/common/download/8.6.2.21900-5/Cisco/lib:/opt/cisco/install/lib:|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|PYTHONPATH=/common/download/8.6.2.21900-5/Cisco/python:/usr/local/cm/lib:/usr/local/cm/lib:/usr/local/cm/lib:|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_CONF_PATH=/common/download/8.6.2.21900-5/Cisco/install/conf|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_BIN_PATH=/common/download/8.6.2.21900-5/Cisco/bin /opt/cisco/install/bin /usr/local/bin/base_scripts|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_PLATFORMCONF_PATH=/common/cisco /usr/local/platform/conf|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|CISCO_INSTALL_LIB_PATH=/usr/local/bin/base_scripts|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Set logging globals for upgrade|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|Before: ILOG_CONTEXT="Upgrade", ILOG_FILE="/var/log/install/install_log_2013-12-30.13.44.35.log", ILOG_RESULTS_FILE="/var/log/install/upgrade-results.xml"|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|After: ILOG_CONTEXT="Upgrade", ILOG_FILE="/common/log/install/install_log_2013-12-30.13.44.35.log", ILOG_RESULTS_FILE="/common/log/install/upgrade-results.xml"|<LVL::Debug>
12/10/2013 14:37:36 refresh_upgrade|Initialize APIs|<LVL::Info>
12/10/2013 14:37:36 refresh_upgrade|Initializing the product API|<LVL::Info>
12/10/2013 14:37:37 refresh_upgrade|Initializing the hardware API|<LVL::Info>
12/10/2013 14:37:38 ServerApiManager|INITIALIZE: sam_legacy_mode_init=1|<LVL::Debug>
12/10/2013 14:37:46 ServerApiManager|INITIALIZE: sam_hssi_mode_init=0|<LVL::Debug>
12/10/2013 14:37:46 refresh_upgrade|Initializing the history log API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initializing the xplatformconfig API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initializing the xproduct API|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Initialize setup functions|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Calling "source /common/download/8.6.2.21900-5/Cisco/install/setup/utils.sh"|<LVL::Debug>
12/10/2013 14:37:46 refresh_upgrade|Initialize setup functions complete|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Getting deployment ID from active side|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Copy /usr/local/platform/conf/platformConfig.xml to /common/cisco/platformConfig.xml|<LVL::Info>
12/10/2013 14:37:46 refresh_upgrade|Calling "cp /usr/local/platform/conf/platformConfig.xml /common/cisco/platformConfig.xml"|<LVL::Debug>
12/10/2013 14:37:48 refresh_upgrade|Check if the upgrade is allowed|<LVL::Info>
12/10/2013 14:37:48 refresh_upgrade|Validate hardware for the upgrade|<LVL::Info>
12/10/2013 14:37:48 refresh_upgrade|Hardware is supported for the upgrade|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate hardware for "callmanager" deployment|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Hardware is supported for "callmanager" deployment|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate from version 8.5.1.10000-26|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Upgrade from 8.5.1.10000-26 allowed|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Validate free space for the upgrade|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|(CAPTURE) Free space: 26040668160, Needed space: 15014745300|<LVL::Debug>
12/10/2013 14:37:50 refresh_upgrade|Free space validation complete|<LVL::Info>
12/10/2013 14:37:50 refresh_upgrade|Run component export scripts|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xproduct.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xcomponent.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initializing xplatformconfig.sh API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument export|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument mode=refresh-upgrade|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument install_root=/common/refresh_upgrade/Cisco|<LVL::Debug>
12/10/2013 14:37:50 component_install|Parse argument data_root=/common|<LVL::Debug>
12/10/2013 14:37:50 component_install|Run component export scripts, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize product data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize "to" side product version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initialize "to" side product version complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize "from" side product version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:50 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:50 component_install|Initialize "from" side product version complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize product data complete|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:50 component_install|Initialize ucos "to" side version|<LVL::Info>
12/10/2013 14:37:50 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucos "to" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucos "from" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Component ucos available on active side|<LVL::Debug>
12/10/2013 14:37:51 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucos "from" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Build the command list for ucos|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:51 component_install|Build ucos export phase commands|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucos export element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Building the command list for ucos is complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component RTMTStart|<LVL::Notice>
12/10/2013 14:37:51 component_install|Execute commands in the command list for ucos component|<LVL::Info>
12/10/2013 14:37:51 component_install|No commands to execute for ucos component|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component is complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Command execution for ucos component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:51 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucplatform "to" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucplatform "to" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize ucplatform "from" side version|<LVL::Info>
12/10/2013 14:37:51 component_install|Component ucplatform available on active side|<LVL::Debug>
12/10/2013 14:37:51 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:51 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:51 component_install|Initialize ucplatform "from" side version complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:51 component_install|Build the command list for ucplatform|<LVL::Info>
12/10/2013 14:37:51 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:51 component_install|Build ucplatform export phase commands|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucplatform export element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:51 component_install|Add "security_prepare RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "password_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "ssh_keys_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "installed_options_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "platform_certs_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "servm_export RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "network_files_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Processing ucplatform script element|<LVL::Debug>
12/10/2013 14:37:52 component_install|Add "drf_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:52 component_install|Building the command list for ucplatform is complete|<LVL::Info>
12/10/2013 14:37:52 component_install|Command execution for ucplatform component RTMTStart|<LVL::Notice>
12/10/2013 14:37:52 component_install|Execute commands in the command list for ucplatform component|<LVL::Info>
12/10/2013 14:37:52 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:52 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/security_prepare|<LVL::Debug>
12/10/2013 14:37:52 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/security_prepare RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Parse arguments|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Validate arguments|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Initialize global variables|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Handle Security Information|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export security information|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export /etc/shadow file|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export login warning message|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export SFTP data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export DRF data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export CCM Service Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export IPSec Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|get_fips_status returning partB fips_cnf as 0|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export Racoon Data|<LVL::Debug>
12/10/2013 14:37:52 security_prepare|Export Tomcat Data|<LVL::Debug>
12/10/2013 14:37:53 security_prepare|security information prepare successful|<LVL::Info>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/password_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/password_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:53 password_migrate|Handle password information|<LVL::Debug>
12/10/2013 14:37:53 password_migrate|Export password information|<LVL::Info>
12/10/2013 14:37:53 password_migrate|Calling mkdir -p /common/component/ucplatform/etc/pam.d|<LVL::Info>
12/10/2013 14:37:53 password_migrate|password information migrate successful|<LVL::Info>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/ssh_keys_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/ssh_keys_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:53 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:53 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/installed_options_migrate|<LVL::Debug>
12/10/2013 14:37:53 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/installed_options_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:55 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:55 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/platform_certs_migrate|<LVL::Debug>
12/10/2013 14:37:55 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/platform_certs_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:55 platform_certs_migrate|Source major version: 8|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|Export platform certificates|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|starting refresh upgrade export certs copy|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|starting refresh upgrade export certs copy|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|exporting certmon config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|creating /common/component/ucplatform/config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|copy /usr/local/platform/conf/certMonitorConfig.xml /common/component/ucplatform/conf/|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|Export bulk sftp config|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|sftp config not available|<LVL::Info>
12/10/2013 14:37:55 platform_certs_migrate|platform certificates migrate successful|<LVL::Info>
12/10/2013 14:37:55 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:55 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/servm_export|<LVL::Debug>
12/10/2013 14:37:55 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/servm_export RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:56 servm_export|Start servm Export processing|<LVL::Info>
12/10/2013 14:37:56 servm_export|Copying /usr/local/cm//../platform/conf/activate.conf to /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:56 servm_export|Copying /usr/local/cm//../platform/conf/services.conf to /common/component/ucplatform|<LVL::Info>
12/10/2013 14:37:56 servm_export|SUCCESS: servm Export processing completed|<LVL::Info>
12/10/2013 14:37:56 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:56 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/network_files_migrate|<LVL::Debug>
12/10/2013 14:37:56 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/network_files_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Export network configuration files to /common/component/ucplatform/etc/sysconfig/network-scripts|<LVL::Info>
12/10/2013 14:37:56 network_files_migrate|Calling mkdir -p /common/component/ucplatform/etc/sysconfig/network-scripts|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Calling mkdir -p /common/component/ucplatform/common|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copy network configuration files|<LVL::Info>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/sysconfig/network-scripts/ifcfg-eth0 to /common/component/ucplatform/etc/sysconfig/network-scripts/ifcfg-eth0|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/sysconfig/network to /common/component/ucplatform/etc/sysconfig/network|<LVL::Debug>
12/10/2013 14:37:56 network_files_migrate|Copying /etc/hosts to /common/component/ucplatform/etc/hosts|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copying /etc/resolv.conf to /common/component/ucplatform/etc/resolv.conf|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copying //etc/nsswitch.conf to /common/component/ucplatform/etc/nsswitch.conf|<LVL::Debug>
12/10/2013 14:37:57 network_files_migrate|Copy network configuration files complete|<LVL::Info>
12/10/2013 14:37:57 network_files_migrate|Export network configuration files complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:57 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform/scripts/drf_migrate|<LVL::Debug>
12/10/2013 14:37:57 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform/scripts/drf_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:57 component_install|Command execution for ucplatform component is complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Command execution for ucplatform component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:57 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "to" side version|<LVL::Info>
12/10/2013 14:37:57 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:57 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "to" side version complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "from" side version|<LVL::Info>
12/10/2013 14:37:57 component_install|Component ucplatform_cluster available on active side|<LVL::Debug>
12/10/2013 14:37:57 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:57 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:57 component_install|Initialize ucplatform_cluster "from" side version complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Build the command list for ucplatform_cluster|<LVL::Info>
12/10/2013 14:37:57 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:57 component_install|Build ucplatform_cluster export phase commands|<LVL::Debug>
12/10/2013 14:37:57 component_install|Processing ucplatform_cluster export element|<LVL::Debug>
12/10/2013 14:37:57 component_install|Processing ucplatform_cluster script element|<LVL::Debug>
12/10/2013 14:37:57 component_install|Add "platform_sso_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform_cluster /usr/local/cm/ /common/log/install/capture.txt" to command list|<LVL::Debug>
12/10/2013 14:37:57 component_install|Building the command list for ucplatform_cluster is complete|<LVL::Info>
12/10/2013 14:37:57 component_install|Command execution for ucplatform_cluster component RTMTStart|<LVL::Notice>
12/10/2013 14:37:57 component_install|Execute commands in the command list for ucplatform_cluster component|<LVL::Info>
12/10/2013 14:37:57 component_install|Search path is /common/refresh_upgrade/Cisco/ucplatform_cluster/scripts:/usr/local/cm/script|<LVL::Debug>
12/10/2013 14:37:57 component_install|Checking command /common/refresh_upgrade/Cisco/ucplatform_cluster/scripts/platform_sso_migrate|<LVL::Debug>
12/10/2013 14:37:57 component_install|Execute "/common/refresh_upgrade/Cisco/ucplatform_cluster/scripts/platform_sso_migrate RU Export 8.6.2.21900-5 8.5.1.10000-26 /common/component/ucplatform_cluster /usr/local/cm/ /common/log/install/capture.txt"|<LVL::Debug>
12/10/2013 14:37:58 platform_sso_migrate|Source major version: 8|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for ucplatform_cluster component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for ucplatform_cluster component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize thirdparty "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize thirdparty "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize thirdparty "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component thirdparty available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize thirdparty "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Build the command list for thirdparty|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:58 component_install|Build thirdparty export phase commands|<LVL::Debug>
12/10/2013 14:37:58 component_install|Processing thirdparty export element|<LVL::Debug>
12/10/2013 14:37:58 component_install|Building the command list for thirdparty is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component RTMTStart|<LVL::Notice>
12/10/2013 14:37:58 component_install|Execute commands in the command list for thirdparty component|<LVL::Info>
12/10/2013 14:37:58 component_install|No commands to execute for thirdparty component|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for thirdparty component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component serviceability_core available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize serviceability_core "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Build the command list for serviceability_core|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize command list|<LVL::Debug>
12/10/2013 14:37:58 component_install|Build serviceability_core export phase commands|<LVL::Debug>
12/10/2013 14:37:58 component_install|Processing serviceability_core export element|<LVL::Debug>
12/10/2013 14:37:58 component_install|Building the command list for serviceability_core is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component RTMTStart|<LVL::Notice>
12/10/2013 14:37:58 component_install|Execute commands in the command list for serviceability_core component|<LVL::Info>
12/10/2013 14:37:58 component_install|No commands to execute for serviceability_core component|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component is complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Command execution for serviceability_core component RTMTFinish|<LVL::Notice>
12/10/2013 14:37:58 component_install|Initialize component data, mode refresh-upgrade|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize database "to" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Access "to" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.6.2.21900-5|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize database "to" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize database "from" side version|<LVL::Info>
12/10/2013 14:37:58 component_install|Component database available on active side|<LVL::Debug>
12/10/2013 14:37:58 component_install|Access "from" side API|<LVL::Debug>
12/10/2013 14:37:58 component_install|Got version 8.5.1.10000-26|<LVL::Debug>
12/10/2013 14:37:58 component_install|Initialize database "from" side version complete|<LVL::Info>
12/10/2013 14:37:58 component_install|Initialize global data complete|<LVL::Info>hi gupta ,
admin:run sql car select * from tbl_event_log
Failed to get Connection.Connector(NOT CONNECTED: Driver=com.informix.jdbc.IfxDr iver;)
admin:run sql car select * from tbl_system_preferences
Failed to get Connection.Connector(NOT CONNECTED: Driver=com.informix.jdbc.IfxDriver;)
restarted the below sevices
Cisco CDR Agent
Cisco Database Layer Monitor
Cisco CDR Repository Manager
Cisco CAR Scheduler
Cisco SOAP - CDRonDemand Service
Cisco CAR Web Service
while accessing cdr reporting showing below error .
------------------------------------------WARNING-----------------------------------------
* Cluster wide parameter 'Call Diagnostics Enabled flag' is set to false. Hence no QoS information will be generated on calls. If required, please configure the same from service parameter page for Call Manager service.
* Problem in determining 2M/HWM breach status. Tbl_System_Preferences table might be corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
* Tbl_System_Preferences table is corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
* Problem in determining Loader Configuration. Tbl_System_Preferences table might be corrupted. Please click on the 'Restore Defaults' button to update the table with default values.
-------------------------------------------NOTICE------------------------------------------
* Problem in determining Billing Tables status. Please check the CAR DB for tables Tbl_Billing_Data and Tbl_Billing_Error.
* Problem in getting the Mail parameters. It might result in mails/alerts/notifications not been sent to CAR Administrators. Please configure this at CAR->System->System Parameters->Mail Parameters.
* Mail id for 'ccmadmin' is not available. CAR Reports/Notifications/Alert Emails might not be able to sent to this user properly. Please configure a mail id in end user configuration page.
if we apllied Restore Defaults ,geting below error
Error Code
Error Description
30029
Direct access to this screen is not allowed.
and try to access system and data base , getting below error
Error Code
Error Description
10012
Database Error. Contact System Administrator.
Does any other way to avoid cdr and do the istallation . -
Upgrade CUCM 9.1 (BE6K) to CUCM 10.5
Hi All,
We are facing the process to update CUCM and I&M on a BE6K platform from 9.1 version to the latest one (CUCM 10.5),
The UCSS is still valid.
Could someone put us on the right direction?
Is Expressway Core and Edge already included if my CUCM upgraded to v10.5?
Thanks in advance.
RegardsRecently I've contact and ask Cisco Licensing Team to Upgrade my CUCM 9.1 to CUCM 10.5,
and they said that my case is an "ordering issue".
Do I need to order some SKUs from CCW before I can upgrade my CUCM?
What SKUs that I need?
Please advise,
Thanks,
Regards,
Ovindo -
How to uninstall cucm subcriber on MCS 7835, CUCM Reloaction
Hi,
Currently we have publisher and subscriber on same location, now the client is thinking to change subscriber location. But the ip scheme on remote site is different. So can we change Subscriber ip address from cli or we need to reinstall cucm with new ip.
Regards,
Humza KhanYou don`t need to reinstall the subscriber, you can change the IP address either from CLI or Operating System Administration page.
You can go through the below link for detailed procedure.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/install/6_1_1/ipchange/ipchg611.pdf
Suresh -
CUCM 6.1.5 and CUCM 9.1 Call Recording CODEC Issue
I have a call recording issue where if the CODEC agreed between an MGCP gateway and the IP phone is G711 call recording fails as it looks for an MTP (there are subs running XCODE in the MRGs for the devices in this scenario). The traces seem to suggest that there is mismatch between the agreed DTMF.
When the call between the phone and the gateway is G729 then call recording works fine and doesn't request MT resource.
SIP traces show that the recorder (Verint Impact 360) responds with a SIP OK which contains options for PCMA, PCMU, and G729.
Call manager traces show that as soon as the INVITE is sent to the call recorder from the CUCM the request for MTP resource begins (i.e. before any media options are presented and even before the 100 TRYING is sent back)
The region setting between the phone and the gateways, in the failure scenario, is set to G711 and link loss type is low loss. On CUCM 9.1 Ive set a CODEC preference list which I have tried g711 as the preference and then also G729.
The region setting between the phone and the gateway regions towards the region the call recording SIP trunk is in allows max. G711.
The question is, why when the call is set up using G729 there is no requirement for an MTP on the call recorded leg whereas when the call is setup with G711 then the CUCM looks for MTP?To answer your question we need to look at the traces , please attach both the traces here.
Thanks
Manish -
Error while updating phone button template in CUCM 8.6
Experts,
I'm getting following error while updating phone button template in CUCM 8.6;
Update failed. java.sql.SQLException: System catalog (sysprocbody) corrupted.
Please check the screen shot attached here with.
What could be the reason?
Thanks
VivekI'm not a Cisco employee, so I can't do anything with your backup.!
You need to take a backup as a precaution (You should have been doing this anyway) Then you need to call Cisco TAC to get the underlying problem fixed. CalManager is a locked-down environment, and only TAC can get the low-level access needed to fix database problems.
GTG -
Jabber 9.6 no voicemail tab for CUC with CUCM 9 and CUC 8.6
Hi guys,
I have Jabber 9.2 and 9.6 clients with CUCM 9.1.2, CUC 8.5.1 and Cisco IM + P 9.1.1.
We've recently updated the CUCM and CUPS to Cisco IM+P. Also we have migrated from CUPC Clients to Jabber clients. The CUC server has remained as is. I was able to get the CUPC clients to get voicemail/visual voicemail but the Jabber client doesn't even display an ico for voicemail.
The service profile for all users is set correctly to point to the CUC server and there's no errors when I go to the jabber client "show connction status".
I haven't been able to find much about this issue. I have noticed that if I set the mail store the voicemail tab appears but we are not using a mail store as the voicemail repositary. Is this now required to check voicemail? If so can someone point me to the configuration guide? We have exchange 2012. Thanks very much!
-AkinHi every body,
I have some problems but not with all the users, is only working with 3 users and the rest of them don't work, I attached the errors that I get when I try to log in Telephony Accounts in the Jabber, I used the Jabber of one User, and from here I introduce my credentials (user and password) and I can get the voice mails (only from de 3 users that is woriking fine), but when I introduce the credentials of the other user I get the error and Can't get the voicemails.
The 127.23.0.7 is the IP address of the Cisco Unity Connection.
Please Help Me I'm stuck with this! -
CUCM 8.6.2 upgrade to CUCM 10.5
Hi,
I have to upgrade a virtualized CUCM cluster (PUB, SUB1, SUB2, TFTP) version 8.6.2 SU3 to version 10.5.
As per documentation this should be a direct refresh upgrade and no need of PCD to do it.
Based on the documentation the main steps of the upgrade are:
-changing the OS to RHEL 6 (64-bit) and the Network Adapter from "Flexible" to "VMXNET 3” for the VM (shut down the VM and perform the changes)
-run ciscocm.version3-keys.cop.sgn.
-run ciscocm.free_common_space_v1.1.cop.sgn
-run the 10.5 ugrade file in following order: PUB, TFTP, SUB1, SUB2
The existing 8.6.2 OVA, 7500 users is using 2 vCPU and 80GB for each vdisk (total of 160GB).
The 10.5 OVA, 7500 users requires 1 vCPU and 110GB for the vdisk.
Does anybody know if I have to run the ciscocm.free_common_space_v1.1.cop.sgn to increase the space to 110GB on each vdisk (even if the total size is 160GB on 2 vdisks which is more then 110GB required on 10.5 OVA)?
Cisco engineer said that this is not possible as well that I can not change the OS to RHEL 6 (64-bit) on the existing server/VM (ESXi 4.1 U3.
He recommends to create a new VM using the new OVA and use the DRS and restore process for performing the upgrade.
Any input/advise will be appreciated!
Thanks.The success to any upgrade is planning. The customer type bank or not doesn't not really matter. What is crucial is your willingness to do due diligence to make this as smooth as possible..
Here are the things you need to do in the order described
1. Read your documentation. Very crucial. CUCM10.5 is a major change on all others.
You need to start by reviewing the upgrade guide, release notes, and new and changed documentation for all the steps and considerations you need to take into account for this upgrade.
NB: The upgrade guide for IM and P is merged with that of CUCM and here is the link for it..
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.html
Release notes found here:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_1/CUCM_BK_CE15D2A0_00_cucm-release-notes-1051.html
2. Plan for your license migration. Usually this involves two steps
a. Use cisco LCU (license count utility tool) to generate license report on your existing cluster. This can be downloaded from cco.filename is LCUZIP-Ver9.1.2.zip
Ensure that you install any unsed DLU and license PAKS on your cluster before you run this..
b. Next email this file obtained from lcu (this is a csv file) tool cisco licensing team [email protected]. This will confirm that your service contracts is in order prior to requesting new licenses for 10.5
c. Login in Prime License Manager after successfully migrated from 8.6 to 10.5
Use the following procedure to generate a license request.
Log in to Cisco Prime License Manager.
From the Licenses > Fulfillment page, select Generate License Request from the drop-down list under
Other Fulfillment Options.
The License Request and Next Steps window appears. Copy the selected text to your clipboard or click save it to a file on your PC and send to [email protected] to get permanent licenses
3. Document the steps you will use for the upgrades. You can send a draft here and I will be happy to review this with you.
Ensure that you write down step by step what you will do on the day. The upgrade guide should be used to write down what you will do on the day. This is a very long upgrade, hence you need to document in detail what you will be doing.
4. Contact the relevant team to get your ESW/UCSS contract numbers. You need this to login to PUT to download your media. I was doing an upgrade recently and realised that the customers ESW contract has expired..So this is crucial.
Upgrade tasks
PCD is your best bet. Install PCD on your Esxi host. Just create a new VM for it. It makes things much easier for you..If you don't have spare capacity to create new VM then do it manually
5. Before you begin..Take a back up of your cluster.
6. VM machine sizing.
Please refer to cucm10.5 ova readme file, found on CCO. Depending on the OVA template you used for your cucm8.6, you may need to change the vm setings prior to upgrade. This is because the disk size and cpu requirements is different for cucm10.5 on some ova templates.
6a. You will need to change the vm adapter settings on your VM. This is documented in the cucm10.5 ova. Your best option is to use esxi powercli. You can download this from VMware website provided you have a valid service contract.
6b. You will need to change your guest operating system to RHEL6. This is also documented in the 10. 5 OVA
7. If your 8.6 cluster is running on VM at the moment, then just do a direct upgrade to 10.5.
NB: before you upgrade you will need to install the ff cop file on all the servers in the cluster
ciscocm.version3-keys.cop.sgn
After this upgrade your cluster starting with cucm. The upgrade guide will tell you the order of the upgrade..
7. Once upgrade is completed, perform the post upgrade tasks.
8. Develop a detailed test plan. Ensure all critical component of your customer is covered in the test plan. Test features that are critical to them
9. Finally, ensure your CV is updated. In case you need to look for another job if everything breaks: (lol)
Answer to your questions:
"As per what I see, an easy option would be to create a new virtual machine and use a DRS? but, would it work if I create the DRS on CUCM 8.6 and use it on 10.5?"
---You may create a new VM or adjust VM settings as I already discussed. If you want to create a new VM, then you will create VM with cucm10.5 ova, install cucm 10.5 on it.
You will then upgrade your current 8.6 to 10.5, take a DRS back up and go and do a DRS restore on the new 10.5 you have installed on the new VM. You cant restore 8.6 to 10.5.
"What happens to presence server? I understand I have to upgrade it too but, will the configuration be transferred to CUCM 10.5 (I mean, services associated with the menus that originally were on presence 8.6)?"
---Yes IM and P needs to match the cucm version. Yes the configuration will be transferred. You don't need to do anything. Please read the upgrade guide carefully.
"If all of the apps are on 8.6, do we need to upgrade everything to 10.5 at the same window?"
---For CUCM and IM and P, yes you have to upgrade them at the same time. The versions must match. It is advisable that you have unity connection on same version too, but not critical. I believe 8.6 unity connection will work with cucm10.5 ( I haven't checked this, so confirm it yourself)
The upgrade is a refresh upgrade. So it does take a long time and there are several reboots. The publisher is the one that takes the longest amount of time. The subscriber is about half the time it takes for the Pub to upgrade. You should be fine with a weekend maintenance widow. Friday evening to Sunday.
"If upgrade fails, can I still go back to 8.6?" Yes as long as you do not use the "free common space cop file" This is discussed in the upgrade guide as well.
It looks daunting, but if you do your home work, you will be fine and we are here to help and assist you all the way
Please refer to this thread for similar discussions:
https://supportforums.cisco.com/discussion/12319616/vm-upgrade-cucm-86-105-question -
Hi,
we are upgrading our CUCM 8.6.1 to 10.5.1 on VMWare Enviroment (vSphere 5.5 running on UCS).
We are running this upgrade in a sandbox, in order to avoid any problem in the production cluster.
We followed the refresh upgrade guide ( http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.pdf)
Pre-configuration steps
Take a clone of the running publisher and put it in the sandbox
Remove DNS servers (they are not available in the sandbox)
Change the NTP Server with a ntp that is recheable from the sandbox
Check that Gateway and NTP connectivity are OK for the CUCM
Pre-upgrade:
Run the cop files to update keys and increase disk space (log partition is 80% full)
Shutdown the CUCM VM and
Increase disk space on the VM configuration
change VM OS from RedHat5 (32bit) to RedHat 6 (64bits)
change VM nic from flexible to VMNIX3
Restart the VM
Upgrade
1. mount the iso
2. connect to OS Administration web interface and perform the Software installation from CD/DVD
3. upgrade process works fine up to the post-installation task
During post-installation tasks (after completing the DB Load and Transforming Copy) the Upgrade process always fails fails with an internal error
IPM|Internal Error, File:ipm.c:2011, Function: ipmReadNormalizedInputLine(), "/usr/local/cm/script/cm-dbl-install RU PostInstall 10.5.1.10000-7 8.6.1.21019-1 /usr/local/cm/ /common/component/database /common/log/install/capture.txt " failed (1)|<LVL::Critical>
IPM| end-of-session "Installing database component": 1109.369 secs.|<LVL::Info>
IPM|Close progress meter "Component Install"|<LVL::Info>
We also tried the intermediate steps:
- upgrade from 8.6.1 to 9.1 : worked
- from 9.1 to 10.5: Failed with the same error
- from 9.1 to 10.1: Failed with the same error
any help will be greatly appreciated, thanks
StefanoIssue was related to Dial Plans, the logs showed
16:45:46.204 | DBUtil::BlockCopyTable ### *ERROR* ###: (diagnosis): Bulk Data Migration for table availdialplan failed due to data constraint issue, (-971).
16:45:46.611 | DBUtil::BlockCopyTable *
16:46:16.555 |*ERROR* Error fetching column information: [Informix][Informix ODBC Driver][Informix]Could not position within a table (informix.systables).
16:46:16.588 | DataConverter_5to6::CopyTables *ERROR* BlockCopyTable failed to process table (availdialplan)
16:47:52.395 | installFull *ERROR* Prior Cancel or Error Processing convert5to6()
Cisco TAC fixed by updating the primary key in the DB.
After the fix we were able to perform the RU as expected. -
DST issue with 7940/7960 on CUCM 8.6.2
Hi Guys,
In the last 19 October, in any city of Brazil started of date summer time (DST), and the IP Phone models 7940/7960 not changed the time automatically. After restart physical or logical the IP Phone stay the correct time.
7940
Firmware de aplicação P00308010200
Firmware de inicialização PC0303010200
Versão 8.1(2.0)
I read any posts in this forum, but, not is clear for me if this problem is related any bug or no. Any have idea about this?
Thank You,
WilsonHi Wilson,
There are a number of DST bugs that affect CUCM 8.6. I would have a look
at the attached bugs . Did you install any of the DST/TZ Timezone updates for CUCM?
Cisco Unified Communications Manager / Cisco Unity Connection
Timezone Update 2013d
Release Notes Version 1
September 19, 2013
Introduction:
These release notes contain important information about installation procedures for the 8.6(2x) Timezone
Update for Cisco Unified Communications Manager or Cisco Unity Connection.
Note
Before you install this Timezone Update, Cisco recommends that you review the
Important Notes section for information about issues that may affect your system.
Updates in This Release
DST updates are cumulative, so installing this patch will provide all of the fixes in the New Updates section plus all of the
fixes in the Previous Updates section
New Updates
CSCui46884
DST/TZ data update with 2013d
Previous Updates
CSCue96910
DST/TZ data update with 2013b
CSCue06553
DST/TZ data update with 2012j
CSCtz20987
DST: Update CM to Olson TZ version 2012c
CSCtn29406
DST: Update CM to Olson TZ version 2011h
CSCtk55066
DST: Update CM for Olson TZ ver 2010o
CSCtj75860
Inconsistent changeover
for DST spring and fall in US, Canada
CSCtg50448
DST: Update CM for Olson TZ ver 2010i
Known Caveats
CSCuj30440
Renaming DST
cop file in logs
CSCuj26553
69xx phones will not display correct time for Chile/Santiago Timezone
CSCue81856
dst
updater.2012j DST cop file does not match Gaza in timeanddate.com
From
http://www.cisco.com/web/software/282074298/106084/dst-862-2013d-cop-readme.pdf
Cheers!
Rob
"Why do the best things always disappear "
- The Band -
Cisco Unity Express (NME-CUE) Compatibility for CUCM 9.1.2
I unable to find latest Compatibility matrix for Cisco Unity Express (NME-CUE) module for integrating with CUCM 9.1.2
The URL: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.html is updated with CUCM 9.0 only.
Request to share Compatibility matrix or suggest Hardware and software for my below requirement.
I am running NME-CUE 7.0.6 on 2951 ISR2 with IOS version 15.2(4)M5 and integrated with CUCM 7.1.5 using SCCP.
I am upgrading my CUCM to 9.1.2 and need suggestion on upgrading the CUE.
Also need details on Licensing for approx 100 Mailbox and 25 Voice Ports (No need of IVR Ports).
Thanks,
ChandanHi Chandan,
CUE 8.6.6 and later are compatible with CUCM 9.1.x;
Support for Cisco Unified Communications Manager 9.1
Cisco Unity Express 8.6.6 provides support for Cisco Unified Communications Manager 9.1.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel8_6/rel_notes/rel_notes86.html#pgfId-411381
Because you are moving from a pre-7.1 CUE version you will need to follow the CSL License migration process;
NoteWhen you upgrade to Cisco Unity Express Release 8.6.x from any release prior to Cisco Unity Express Release 7.1, you must replace your pre-CSL licenses with CSL licenses. You must migrate your licenses for the mailbox features and port features. If you have purchased the optional IVR features, you should also migrate your licenses for the IVR features.
Software Activation for Cisco Unity Express 7.1 and Later Versions
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel7_1/Licensing/CUELicensing_book.html
Cheers!
Rob -
When do the CTI ports between CUCM and UCCX get created
Hi All,
I am trying to work out when the CTI ports between CUCM and UCCX get created.
Do they get created during the post installtion wizzard when you selectthe number of HR licenses or do you need to manually create the CTI ports after the post installation wizzard.
Many thanks for any help
RegardsIn new versions (since 4.x) UCCX creates the CTI route points on Call Manager when a trigger is added on UCCX side.
When you add a Call Control Group on UCCX side, that process creates all the CTI ports in CUCM automatically or updates the existing ones if you change settings for the call control group. -
Upgrade Order - CUCM, CUC, & CUP
Customer has a virtual CUCM, CUC & CUP environment running on 2 hosts in the same chassis. CUC & CUP are misbehaving due to known CPU utilization bugs and will be upgraded to latest SU. Question is what to upgrade first? CUC is the most unstable, so upgrading it first was my initial thought, then CUP and CUCM last. Is there any reason to change this order of updates?
CUCM 8.6(2a)SU2 update to 8.6(2a)SU5
CUC 8.6(2a)SU3 update to 8.6(2a)SU5
CUP 8.6(5) update to 8.6(5)SU3
I appreciate it,
BeauYou can upgrade CUCM or CUC in either order based on the versions you provided. CUP should be upgraded after CUCM has been upgraded.
Maybe you are looking for
-
Help! PB G4 won't boot and Disk Utility can't fix it!
I have an insufficiently backed up PowerBook G4 1.67MHz (1GB RAM) that suddenly nosedived last night. I was surfing the Web and OmniWeb froze up. I couldn't force-quit it because the Finder was also locked up. So I held the power button until it shut
-
I have an app that performs thousands of inserts at a time via prepared statements. A batch of insert statements could contain 100's to 10,000's of insert statements in it. When a batch is completed, an execute batch is performed. Now when our users
-
Problems installing an SSD on new MBP- shows up unformatted with only 8MB
Hi all... hoping you can help.... I just received my new 2.66ghz 15"MBP today as well as an Intel X-25 160GB SSD. I booted the computer with the stock drive to ensure everything was working fine as shipped... perfect. I downloaded and installed all r
-
Hi trying to figure out how to display an HTML file. I am able to display an actual link just fine, but when I try to display an actual file, I get a MalformedURL exception. Any suggestions? Thank You, -Jason Edited by: jfitzpat on Dec 3, 2009 7:52 A
-
Add video clip to an online grant application
I have been asked to help a friend add some video to an online grant application. Just wondering if anyone has done this?