CUCM 9.0 and SX20 video call - inter region

Hi Guys,
I am having an issue establishing a inter region video call between 2 SX-20 endpoints.
Call works fine when I move them to same region
I have made the CAC to unlimited for video on the Locations
I have played with the Video Bandwidth in the regions.
I have changed the defaults under the Service Parameters for Inter and Intra Region
I have tried to adjust MAX and MIN under Conference 1 on the SX20s
I have tried changing the default video call bandwidth to both 384 and 768
In every case, Call works fine when both endpoints are in same region and just and audio call when interregion (G711Ulaw) .
For some reason its not presenting the right codec.
Also in CUCM 9.0, I am not able to collect the SDI traces on the endpoints. it says "Trace not found for Service Call Manager, trace type 'sdi' " which is a reported bug in older releases but was fixed. I guess it has returned too ...
Any suggestions ?

Hello Varungulati,
I'm having the same issue, did you manage to solve this problem ?
Thanks,
Nadjia

Similar Messages

CUCM, VCS-Core and Edge, B2B Calling

I have CUCM ver 9.1(2) and VCS 8.1.1 in my environment, the VCS-C and VCS-E are currently setup to do MRA which is working fine for the vpn-less Jabber.
We also have a number of SX series Telepresence codecs dotted about which are registered to the CUCM and used for internal video conferencing, now the company is wanting the ability for outside video conferencing so need to setup the B2B capability (licencing has been sorted out already for Rich Media Sessions)
I've been ploughing through a number of docs on this, I have not found one yet specifically for CUCM registered devices and VCS doing nothing but firewall traversal, so the guides I've been working from are for enabling CUCM registered devices to talk to VCS registered devices and just taking relevant bits such as Neighbour zones and SIP trunks from it.
Does anyone know of a guide specifically for the direction Cisco appear to want us to go, which is Telepresence devices registered to CUCM and the VCS just doing firewall traversal.
Or a guide on the firewall traversal part only and I can tack it on to my notes from the other adapted guides.
My current notes have the following tasks I think I need to do to get this working
- setup partition and CSS on the CUCM for Telepresence calls
- setup SIP trunk on CUCM pointing to Expressway-C (have subnotes on requirments for SIP Trunk Security profile and the SIP Profile)
- SIP route pattern(s) on the CUCM pointing to the SIP trunk
- Enterprise parameters on the CUCM such as Cluster FQDN, Organization Top Level Domain and URI Lookup Policy
- On the VCS-C a neighbour zone pointing to the CUCM
- Search rule to route inbound calls to CUCM neighbour zone
Is this looking correct so far? If so then what else will I need to in relation to traversal zones and VCS-E call routing to get calls in and out the business?
thanks in advance
Tigre

Was checking the logs on the SX10 itself, appears to be reporting the same thing about 503 Service Unavailable, I had the logging on it set to "Extended Logging"
(NB - the address 10.1.99.198 in this case is not the SX10, it is my laptop as I was using the SX10's webgui to remotely control the device and make the call)
Currently discussing this issue with Cisco TAC, will update as and when more info comes
Line 1113: Sep 10 15:24:56.367 a9 appl[1529]: 6097.58 CuilApp   User admin(1001) about to execute command '/Phonebook/Search ContactType: any Limit: 100 Offset: 0 PhonebookType: local SearchString: [email protected]' from 10.1.99.198.
Line 1114: Sep 10 15:24:56.375 a9 appl[1529]: 6097.58 CuilApp   User admin(1001) about to execute command '/CallHistory/Recents DetailLevel: Full Limit: 100 Offset: 0 SearchString: [email protected]' from 10.1.99.198.
Line 1115: Sep 10 15:24:56.384 a9 appl[1529]: 6097.59 CuilApp   User admin(1001) about to execute command '/Phonebook/Search ContactType: any Limit: 100 Offset: 0 PhonebookType: corporate SearchString: [email protected]' from 10.1.99.198.
Line 1117: Sep 10 15:24:58.634 a9 appl[1529]: 6099.84 CuilApp   User admin(1001) about to execute command '/Dial callType: Video number: [email protected]' from 10.1.99.198.
Line 1125: Sep 10 15:24:59.154 a9 appl[1529]: 6100.36 MainEvents I: OutgoingCallInvoked(p=3) remoteURI='sip:[email protected]' localURI='sip:[email protected]' bookingID=''
Line 1164: Sep 10 15:24:59.859 a9 appl[1529]: 6101.07 MC I: CallParticipant: calledUri: sip:[email protected]
Line 1190: Sep 10 15:24:59.890 a9 appl[1529]: 6101.10 SipPacket   INVITE sip:[email protected] SIP/2.0
Line 1196: Sep 10 15:24:59.892 a9 appl[1529]: 6101.10 SipPacket   To: <sip:[email protected]>
Line 1295: Sep 10 15:24:59.960 a9 appl[1529]: 6101.17 SipPacket   To: <sip:[email protected]>
Line 1306: Sep 10 15:24:59.967 a9 appl[1529]: 6101.18 SipPacket   To: <sip:[email protected]>;tag=1393374~8642d04e-70cd-49a5-b73c-5ca5fe21b218-48171693
Line 1313: Sep 10 15:24:59.970 a9 appl[1529]: 6101.18 SipPacket   ACK sip:[email protected] SIP/2.0
Line 1318: Sep 10 15:24:59.972 a9 appl[1529]: 6101.18 SipPacket   To: <sip:[email protected]>;tag=1393374~8642d04e-70cd-49a5-b73c-5ca5fe21b218-48171693
Line 1328: Sep 10 15:24:59.979 a9 appl[1529]: 6101.19 MainEvents I: CallDisconnectRequested(p=3) remoteURI='sip:[email protected]' cause=[normal('') 'LocalDisconnect']
Line 1333: Sep 10 15:24:59.986 a9 appl[1529]: 6101.19 MainEvents I: CallDisconnected(p=3) remoteURI='sip:[email protected]' causeToLocal=[disconnected('Service Unavailable') 'RemoteDisconnect'] causeToRemote=[normal('') 'LocalDisconnect']

CUCM registered SX10s and adhoc video conferencing

Hi All,
We have a customer with CUCM 10.5 looking to do some very basic video conferencing (multi party but only need loudest talker switching). Simplicity is key here, they are used to adhoc conferencing including MeetMe in CUCM using traditional IP phones. They are looking at installing SX10s in a few meeting rooms, registered to CUCM 10.5. The questions I have are:
i) Is it possible to use a G2 ISR (2911 etc.) with a homogeneous conference bridge configured for h264 / HD 720p and have the SX10s be part of a conference? The data sheet indicates the SX10s support 720p30 (http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/telepresence-quick-set-series/datasheet-c78-731274.html). I understand there would be some serious limitations here like no transcoding (all parties in the conference have to support the 720p stream), this shouldn't be an issue as all devices will be SX10s.
ii) Is it possible to initiate a MeetMe conference from an SX10, either from the remote or a touch 10?
ii) Is it possible to dial into a MeetMe conference from an SX10, either from the remote or a touch 10?
iii) Is it possible to escalate a point to point call to an adhoc conference from an SX10, either from the remote or a touch 10?
The Cisco TelePresence Endpoints and Cisco Unified Communications Manager document (http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/administering-endpoints-running-tc72-on-ucm1051.pdf) has a few lines on adhoc conferencing (page 54) which says "To enable ad hoc conferencing the CUCM must be set up with a Conference Bridge (media resources), and the conference bridge must be added as a Cisco Telepresence MCU in CUCM." Which makes me doubt the PVDM3 video conference bridge would be supported.
Are there any other solutions to a simple video conference requirement, or would it have to be a MCU registered to CUCM?
Thanks,
Jonathan

With the SX10's registered to CUCM there is several options here. One is that if they own a good amount of CUWL then there is the ability to get free TelePresence Server licenses. I believe it is for every 30 CUWL pro they get 1 screen license and the ability to install conductor. In order to install this you need to make sure that you have VMware resources to handle those two installs. Then you can have your ad hoc meeting configured in that.
If they want a physical appliance than a MCU 53xx can be used as well. License it based on how many people you want in one bridge.
In either case you will need to configure the Media Resource Group option in UCM to point to those SIP trunks to allow for the 3 way video call to happen and it will be automatic to the end user. They will see a call coming in and then the option to accept and merge.
I remember reading about using a GSR but it has to have the DSP 3 module in it for the video encoding.

Logitech C920 and Skype Video Calls

So, the Logitech C920 I have worked before with Skype video calls with no problems. But after this new update, it doesn't detect the web cam anymore. I've googled, searched this forum, searched reddit and every possible form of help to only still not detect the web cam.
I've used 6.22, 6.18, and right now I'm on 6.14 and it still won't be detected. I've tried every USB 2.0 and USB 3.0 port I have on my rig.
Now before someone tells me it's the web cam that's broken, the web cam works on Logitech's program, it works on twitch, it works on Microsoft's program as well. All drivers are up-to-date as well.
Completely frustrated with this problem and I was wondering if posting it would be of any help.
I am on Windows 8.1 Pro 64-bit as well.
Solved!
Go to Solution.

Hi,
Im having a similar issue. Logitech c920 no picture in SKYPE. Other apps are OK and SKYPE titles my webcam but it just a blank screen with spinning wheel in setting. Sound is OK.
Im running Windows 7 64bit. I have uninstalled SKYPE and updated the drivers ( AMD Catalyst to 14.2 and also tested beta 15.4 ) with no change.
Any help would be appreciated
IrishTrekkie
peacemak3r wrote:
So, the Logitech C920 I have worked before with Skype video calls with no problems. But after this new update, it doesn't detect the web cam anymore. I've googled, searched this forum, searched reddit and every possible form of help to only still not detect the web cam.
I've used 6.22, 6.18, and right now I'm on 6.14 and it still won't be detected. I've tried every USB 2.0 and USB 3.0 port I have on my rig.
Now before someone tells me it's the web cam that's broken, the web cam works on Logitech's program, it works on twitch, it works on Microsoft's program as well. All drivers are up-to-date as well.
Completely frustrated with this problem and I was wondering if posting it would be of any help.
I am on Windows 8.1 Pro 64-bit as well.

Minor bug: Smart Audio and voice/video call

Hi. There is a slight bug regarding the Smart Audio driver. Here's how to get the problem:
1. As we all know, the speakers for X220 isn't exactly loud. So I overcame this problem by going in Smart Audio and selected the custom preset for EQ, setting all the sliders to maximum.
2. Go have any kind of voice/video call, be it Skype or MSN. As Smart Audio senses a voice call, it sets the audio into VOIP mode.
3. Here's the problem. After you finished the voice call, the EQ settings doesn't go back into my previous setting (the custom preset), rather, it goes back to "Off", the default setting.
Thank you.

hey jamestan,
have you tried uninstalling the Smart Audio driver and then install the latest version which is available on our website?
If not, kindly do so.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Individual messages not sent; Group ones too and cannot video call

Hello so my since yesterday night, my individual messages to one person cannot be sent and I can't even force skype to quit. So this happened, refer to screenshot. Is it because i was in a group video call while messaging her on skype?
So now, the messages are not sent, I cannot send messages to another group chat and i cant even press the call button. I have restarted skype, my computer and re-installed skype, nothing works. What do i do?

Thank you for sharing this with the Creator community

Nokia E90 and Fring video call

how can i do video call by fring on my e90..?? It doesn't show video call option... And if some one do video call to me on fring it doesn't show the video... Plz help...
Moderator's notes: Post moved to it's own thread, subject changed.

First try the Download! app. Might find it lurking in either Internet or Media.
If that fails, try google - search for this: Video_Center_EURO_V_3_1_0_S60_31
Sanjay Mehta
Motorola "Brickphone" circa 1996, Alcatel One Touch, Ericsson R380, Sony Ericsson T220, Sony Ericsson T630, Nokia E50, Nokia E61i, Nokia 9300i, Nokia E71,Nokia X6, Google Nexus S, iPhone 4S

After installing Mavericks Facetime and skype video calls are terrible

Hi,
I just got my GF to buy herself a Macbook air. I myself got a Macbook Pro, and we were talking on facetime no problem what so ever. The stream was flawless, splendid infact! But then it happend, I saw that there was a new OSX available. Right away I said to my GF that there was a new update. And we should upgrade ASAP, to see the new features and what not. Going to be great I said. Never have I been more wrong. We continued facetiming troughout the download fase. And was not having any issues. But when we initiated the installation and after the reboot and the "amazing" mavericks OSX was installed. I called her back to continue the conversation. It was a complete disaster, she could only hear a few words of what I was saying. sometimes I got a hole sentence through without beeing broken off. Never lost the conection, just falling in and out. Tried calling with the new just talk feature without any luck.
How can it be that something that was working perfectly, no is completly broken. I tried using skype instead, even with worse videoquality the conversations were a nightmare. So my final solution was! Relogging with bootcamp, and logged on windows 7. poped up skype, and it ran FLAWLESSLY for HOURS. no interuptions what so ever.
So what I'm asking. I want to go back to facetime, and that lovely video quality that you offer. Has anyone experienced the same issue, and found a fix for this if I may say embarresing problem. This shouldn't be a issue at all. Not when it was working flawlessly before.
Have allready tried rebooting and pressing "cmd" + "r" and doing a reinstall of Mavericks, did not do me any good.
I do appreciate all the help I can get. I'm desperate!
Regards
Desperate facetime user whos been forced to use windows and skype

Hi,
Did you delete the com.apple.imessages.bag.plist and com.apple.imservice.imessages.plist ?
I would also try deleting com.apple.imagent.plist as this is used by both FaceTime and iMessages.
If none of those work I would open Keychain Access in Applications/Utilities and use the Repair Keychain in the App Menu.
10:16 pm Monday; October 28, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

IChat 5.0.1 (SL) and Skype Video call?

Am new to this interweb calling but am excited by the prospect. If I am running iChat on my iMac - how do I set it up to call my friend in France who is using Skype on a PC? Thx

Of course your friend could get AIM for the PC or Trillian Pro which will Video chat with iChat.
I presumed that from the way you posted your friend was unlikely to do this.
I would seriously suggest you get Little Snitch
This has preset that allow Web Browsing and other regular apps.
It gives you Pop ups when any app calls you or calls out and tells you where and and on what internet ports it is using.
Like this iChat one
iChat in Video Invites calls the SNATMAP Server as in the pic.
After connection to your Buddy's IP on port 16402 the SNATMAP Server drops out leaving you Peer to Peer (You can log out of any AIM or Jabber Server you are in)
Skype does not do things this way as Little Snitch will show you.
Little Snitch comes as a trial for free and will give you enough for you to make a decision.
8:03 PM Thursday; November 19, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

I lost my video recording and Facebook video calling faecelity

i got my macbook pro one year ago evrything was fine untill one mounth ago but now on facebook my partners can see and hear me but i hear them but can't see them. i was tooken picture and recording vidoes on my facebook before but now no camera on my facebook. help plese!!!!!!!

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

Skype screen goes white during calls and video calls

Hi,
I'm using Windows 8.1 and recently after the latest skype upgrade I'm getting a white screen during regular calls and during video call while I can talk and hear the other side and on the video call the other side can see me. Important to mention that I see the contact list on the left side.
What should I do in order to fix it? (tried reinstalling skype)
Thanks a lot in advance!

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

How can i make a video call to non iPhone users like Noika etc in India they dont have Face time software on the devices

hi
i bought new iPhone 4 after long association with Nokia mobiles but one thing is puzzling me how to make a video call from my iPhone to my other friends who use Nokia E 5/6/7 and make video calls easily
I have 3G connection even my iPhone is not recieving or making any video call
can some one already using this facility help me out
sanjay from jaipur

I havn't got it, but have you tried the Skype for iPad app ? - http://itunes.apple.com/us/app/skype-for-ipad/id442012681?mt=8#

HOW TO DO VIDEO CALLING IN LENOVO A536?????

i am not getting the option for video calling in my lenovo a536 black.it is having secondary camera and i was told from lenovo support before purchase that this phone having video call.so where the option for video call.

Check this thread for video calls for E63: http://discussions.nokia.com/t5/Eseries-and-Communicators/video-call-in-E63/td-p/433677
As for Fring, you can download it on the Nokia Store: http://store.ovi.com/content/9356?clickSource=search&pos=2

How to get video calling back on Facebook?

i have download the new mac os x maverick and lost video calling on Facebook. The icon has disappeared. How do i fix this?

Same thing here. After install of os x Maverick I have no Icon nor video chat of any kind on my macbook pro..I spent 1 hr with an Apple agent and he stated it's a FB issue not keeping up with the advance of Maverick . They also said I couldn't go back to Mountian lion because I did the istall .. So at this point nothing that I know of can be done . I have sent in a complaint to fb in which there is site there as well that has many complaints of our same isse.. HOPE SOMEONE CAN GET THIS SORTED SOON!

Screen sharing in group video calling

Is it available screen sharing option for gp video calls ?

I got this e-mail too. I do not think it is scam. But I want to use both desktop and windows apps. What the problem? Please Skype team do not change anything.
Use the best Skype experience on your computer
Hello .......,
It looks like you’ve signed into two Skype for Windows apps ‒ Skype for Windows desktop and Skype for modern Windows ‒ on your Windows 8 device.
We’re simplifying your experience down to one app that you can use either with your mouse and keyboard or with touch. Going forward you’ll only need to use the Skype for Windows desktop app. This app has more features to help you stay connected like screen sharing and group video calling. Also, your chat conversations (from the last 30 days) and all your contacts will appear as normal.
Note: From 7 July, 2015 you’ll no longer be able to sign into the Skype for modern Windows app.

CUCM 9.0 and SX20 video call - inter region

Similar Messages

Maybe you are looking for