CUCM ALARMS for EPS (EMERGENCY PAGING SYSTEMS)

Our CUCM need to interface HTL to Emergency paging system (EPS).
EPS collects alarm traps from HTL and inform the maintenance in-charge via SMS, voicemail, email.
Now I like to know the list of alarms that HTL sends out as SNMP traps. I couldn’t able to find this in the CISCO website.
I am not sure which SNMP version does CUCM 8.5 use.
Could anyone able to find these info and also confirm how many SNMP hosts can be assigned to send alarm traps.
Thnaks
Riyazdeen.

Great article, there is now a new range of cyberdata singlewire informacast enabled IP Intercoms. I found some here through this UK supplier. www.ipagingsystems.co.uk The Intercoms double as a paging ip speaker that accept SIP and Multicast.

Similar Messages

CUCM mulitiple paging via ATA and third party paging system

We have several campuses in our school district that use an ATA connected to a third party paging system. A couple of the Schools are merging...and they wanted to know if we could in some way "link" the two paging systems so that they only have to call one extension when they page. We are currently using CUCM v 8.6.1
Thanks,
Greg

Yeah, that won't work, plenty of people had already tried that to simulate a paging system, you only get the connection to the device that answers the call.
The only possible way I can think of, assuming they're in the same physical area, is to actually fork the cable from the ATA to the paging system.
If not, they'll have to live with two DNs for paging.

System of alarm for a building

hello,
I am a novice in labview and I need help.
It is intended to construct a system of alarm for a building with some entrances in such way that:
1.    The system will have to protect two doors, 4 windows and door of garage.
2.    The system must not have switch of general cut
3.    To enter in the building without going off the alarm it must: To bind the switch (key) in the out side of the door, and i 30 seconds later, the second door opens (Second key), this after having closed the first door.
4.    Any shunting line to the indicated procedure sets in motion the alarm, to torn off the alarm is necessary to repeat procedure 3
5.    To protect the building, it is necessary that all the doors and windows are closed and to execute the inverse procedure of 3.
Thaks

caco wrote:
Sorry just have answered now but I had to learn a little more.
Yes, this is an académic work, For that i'm only go to use labview, without hardware, simulating the signal of the sensors with buttons on \ off.
I already made a little but I am with problems.
1º Problem
My clock only can start counting when the outside door is closed. To make this I used a Elapsed function that counts until the time target (30segundos) and “gives” the indication to the alarm that the key whose introduced in de inside door before the thirty seconds terminate. The problem is that after arriving at thirty Secs it goes to 0 and continues to count. How i do to make it stop when the alarm is not triget or not.
Do you have AutoReset turned on in that Express VI? Perhaps you want to set that to off.
Also I do not know how I put the system to zero when the alarm dont starts.
I don't know what that means.
2º Problem
Will be necessary to have deep knowledge in logic boolean to obtain the cover of all the logical operations.
I would say so.
3º problem
point five. can you give me a tip about it ?
You should look at a state machine archtitecture. Search the forums. This will allow you to have different paths of code execution based on the current state of your program
Your screenshots embedded in your message don't show up because they point to a location on your harddrive. Don't use firefox's cut and paste routines for embedding screen shots. Use the Insert Image button on the editor's toolbar.
By the way. On the numeric palette, there is a compound arithmetic function. You can set that to boolean operations such as OR, so you can or everything together in one step rather than needing a half dozen like you have now.

Use Call Manager to play media over a paging system.

We have a Bogen overhead paging system and would like to play some music from the Cisco system. It would be for playing Brahms Lullaby when a baby is born. We currently use the phone system to access the paging via a LS port on the back of our 2821 router. We use a PCM2000 w/zones for paging. Have you all ever had to setup anything like this?

One option would be to setup an on hold source with a .wav file of Brahm's Lullaby. You could then assign this MOH to a DN, call the paging system from the DN and press Hold. You could also set this up using an IPCC auto attendant script.
Hope this helps.
Brandon

ChaRM scenario for only one productive system

Hi CHaRM-experts!
I would like to know whether or not is it possible to use the Change Request Management scenarion for only one productive system?
It means we have systems and cases where we should apply the emergency correction only in productive system, without any transport from DEV or QAS system.
Does ChaRM support such case?
Thank you very much!
regards
Thom

Hi Don,
thank you very much for your answer.
No, I do not plan any transport in the productive system.
I would just make any adminstrative changes without transport.
Does ChaRM support such scenarios?
Thank you!
regards
Thom

SAPCAR: can not set permissions for /EPS/in/SIGNATURE.SMF

We are running SUM 1.0 SP10 on IBM i with V7R1 to put EHP6 and SP's on an ERP 6.0 system. Phase PREP_PRE_CHECK/SCANDIR_EPS0 repeatedly ends with multiple errors that SAPCAR: can not set permissions for /EPS/in/SIGNATURE.SMF file. We tried increasing the sidADM and R3GROUP authority to the file, but it changes them back and ends with a different number of errors each time, see example:
SAPup> Starting subprocess with PID 4295601 in phase 'SCANDIR_EPS0' at 20140319101619
    ENV: DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
    ENV: ILE_PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/usr/bin:.
    ENV: LIBPATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64/server:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64:/usr/sap/Y60/SUM/jvm/jre/../lib/ppc64:/usr/sap/Y60/SUM/jvm/jre/lib/ppc64/jli:/usr/sap/Y60/SUM/jvm/jre/../lib/ppc64/jli:/usr/sap/Y60/SYS/exe/run:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/lib/lib64:/sapdb/clients/Y60/lib:/sapdb/programs/lib/lib64:/sapdb/programs/lib
    ENV: PASE_LANG=en_US
    ENV: PASE_LC__FASTMSG=true
    ENV: PASE_LIBPATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/lib/lib64:/sapdb/clients/Y60/lib:/sapdb/programs/lib/lib64:/sapdb/programs/lib
    ENV: PASE_LOCPATH=/usr/lib/nls/loc
    ENV: PASE_NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat:/usr/lib/nls/msg/en_US/%N:/usr/lib/nls/msg/en_US/%N.cat
    ENV: PASE_PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:/usr/bin:.:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/bin:/sapdb/programs/bin
    ENV: PASE_STDIO_ISATTY=N
    ENV: PASE_THREAD_ATTACH=Y
    ENV: PASE_TZ=<EST>5<EDT>,M3.2.0,M11.1.0
    ENV: PASE_USRGRP_LIMITED=
    ENV: PATH=/usr/sap/Y60/SUM/abap/bin:/usr/sap/Y60/SYS/exe/run:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:/usr/bin:.:/usr/sap/Y60/hdbclient:/sapdb/clients/Y60/bin:/sapdb/programs/bin
    ENV: SAPSYSTEMNAME=Y60
    ENV: dbms_type=db4
    ENV: dbs_db4_schema=R3Y60DATA
    ENV: ILE_DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
    ENV: PASE_DIR_LIBRARY=/usr/sap/Y60/SUM/abap/bin
    ENV: DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
    ENV: ILE_DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
    ENV: PASE_DIR_LIBRARY_RMT=/usr/sap/Y60/SUM/abap/bin
    ENV: ILE_LIBPATH=/usr/sap/Y60/SUM/abap/bin
EXECUTING /usr/sap/Y60/SUM/abap/bin/SAPCAR -flat -R /usr/sap/transD60/EPS/in -xvf /tmp/NO_SAVE/ERP_EHP6_Download/K-60609INECCDIMP.SAR
SAPCAR: processing archive /tmp/NO_SAVE/ERP_EHP6_Download/K-60609INECCDIMP.SAR (version 2.01)
x CSR0120031469_0080800.PAT
x SIGNATURE.SMF
SAPCAR: can not set permissions for /usr/sap/transD60/EPS/in/SIGNATURE.SMF (error 13). No such file or directory
SAPup> Process with PID 4295601 terminated with status 13 at 20140319101623!
Has anyone lse exprienced this and can share a fix?
Thank you,
-Margie

Hi,
We had the same issue, and in my opinion it is caused by the parallelisation of sapcar during SUM phase PREP_PRE_CHECK/SCANDIR_EPS0
I did see several parallel SAPCAR jobs running during this phase.
So what happens when one job extracts SIGNATURE.SMF at the same time another job tries to finalize its extraction by setting the permissions for /usr/sap/trans/EPS/in/SIGNATURE.SMF?
It can happen that permissions are being set at the same time another sapcar yust deletes this file to begin extracting.
Since we had 146 SAR archives that needed to be extracted, a retry allways ended up in 4 to 12 conflicts.
What did do the trick was adding
/sapcar/extrcact_parallel = 0
to the file
../SUM/abap/bin/SAPup.par
Just as Christoph Langer suggested.
We had to restart the whole phase, a repeat was not enough to solve the problem.

Configuring Paging system to interface with an FXO port

Hello
Wanted to see if there is some good documentation on configuring my fxo port on my gateway to interface with a paging system?
Thank you for your help

Hi Joseph,
It really depends on the type of overhead paging system you're intending to use. The documentation for the paging system being used usually specifies exactly what type of circuit is required.
Kind regards,
Craig

Illustrator CS5 Not the Default for EPS and other Vector Formats

Hey everyone, the issue I'm haveing is not just with Illustrator, but sense I couldnt find a general CS5 forum, and Illustrator was the last CS5 application i noticed this for I'm hoping to find some answers here.
So on to the issue....
I have noticed that on other computers (Macs for sure) that Illustrator, Photoshop, Dreamweaver etc... are set as the default handlers of certain file types that are associated with each application, and as such, give each filetype there own little icons reflecting such.
However on my system (Windows 7 Ultimate x64) this does not seem to be the case. I can go in and set them as default manually, which I have done for the filetypes I use most frequently, but I do not get to enjoy the nice icons that made for each filetype, i just get a bland, default icon that is the same for every filetype.
Is there a way to fix this issue?
Thanks for you help.

Yes, I think i mentioned it before that I knew I could set the default app through Explorer (right clicking, going to "open with" etc..) but this doesn't let you use any of the custom icons that come with the adobe applications, it sets it as the default icon associated witht he particular application. I'll take a look in the properties when I get home but, but I think you may be referring to the "open with" dialogue.
Most applications like Firefox, iTunes etc.. have a button in there preferences menu to "set as default" for all file types they can open, however I don't see such an option in any Adobe applications except for bridge, and that doesn't seem to do anything.
Date: Thu, 8 Jul 2010 00:09:53 -0600
From: [email protected]
To: [email protected]
Subject: Illustrator CS5 Not the Default for EPS and other Vector Formats
I believe in the properties pane for one of those files it will display the default app for opening such files and you can change it there as well and make it apply to all similar files.
>

Never again - Emergency Alert System (EAS)

My daughter was watching TV last night and FIOS interrupted programming with some Emergency Alert System message that was painfully loud and temporarily damaged her hearing. We could not disable it when it happened. If this ever happens again, we're through with FIOS TV.
I can't believe that anyone would do this not knowing the potential damage it can incur.

ibwalkn,
First, I am sorry your daughter's hearing was damaged, I hope it really is or was temporary. Having said that, however:
a) It is required by law to broadcast those alerts, as you have already been informed about and provided with a reference.
b) I think the alert really has to be louder than the normal programming to get the viewer's attention (but obviously not so loud as to damage someone's hearing).
c) I think it also disrupts your viewing to get your attention, just like the sound volume. I don't think there is a program being broacast that you cannot afford to miss a minute or two of. Now, as to having to restart the recording, I agree, that really should not be required. As far as I can tell, the FiOS DVRs record programs based on the program info provided in the Guide; I am guessing that perhaps the emergency broadcast temporarily causes the DVR to lose the program info, and thus it stops recording. That would seem to me to be something Verizon could fix, if that is in fact the reason it stops recording.
d) Although my kids are long, long gone from our house, I fully support the current implementation. It is a good thing, and only a minor irritant, and pretty rare at that.
I don't know how old your daughter is, but if it were her that was missing, I suspect you would have a different outlook on this (again, except for the hearing damage).
There are certainly some problems with FiOS, but this is not one of them, IMO.
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.6.0, Build 06.89
Keller, TX 76248

I have an Iphone 4 iOS 6.1.3 and have read that it is capable to receive the Weather Emergency Alert system. I have also been told that it will not. This is confusing. Can someone at Apple clarify. If it doe not work on this phone is a download available?

I have an Iphone 4 iOS 6.1.3 and have read that it is capable of receiving the Weather Emergency Alert system. I have also been told that it will not. There is no option in Settings / Notifications. This is confusing. Can someone at Apple clarify? If it does not work on this phone is a download available?

Apple usually doesn't participate here, we're just users. Have you done a search for an app for Weather Emergency Alert in the app store? It certainly doesn't come built-in in the iphone.

Excessive "Emergency Broadcast System" Tests

I'm a late night tv watcher in FL and for months now, I've been seeing these "monthly" Emergency Alert System or Emergency Broadcast System messages interrupt programming. It's really a pain with certain VOD programs because they don't allow more than 2x FF, so presuming VOD resumes immediately (not a given) I can still be forced to have to fast forward through 2 hours of a movie to get back to the climactic action sequence or dramatic courtroom shocker or what have you.
These tests are very important. I really, really want this system to work to inform me if a hurricane or other natural disaster is headed my way.
That said, I counted 6 days in a row that they ran this test. Over the last few months it's felt like almost every night.
These are supposed to be monthy tests.
If they ran these tests during prime time, folks would be upset maybe not so much the first time, but certainly if it started to feel like nearly every night during prime time, Verizon was interrupting programming to run these tests.
Which begs the question, are there really so many changes to the system occuring that these tests must be repeated almost nightly?
If not, why aren't they being done on their monthy schedule? It's no fun getting blasted with that Emergency test klaxon and my ceiling is getting worn out....
If someone would please look into that, I'd surely appreciate that.

The tests are not under Verizon's control.
That said it would be great if Verizon fixed the way it effects recordings and VOD, so as to minimize impact after an alert is over.

I want to set the alarm for weekdays/weekend

I want to set the alarm for weekdays/weekend how I can do that on my iphone 3Gs, I Google as well but unable to find and way to do this. I do not want to set the alarm every day. It really very hard that I set it every time.
If any know any other application that I can have for alarm. iphone built-in alarm system is carp.

Yes, but he doesn't say why it is, unsuitable, for his needs. From what he says, it is perfect for his needs - you can set it for just one day, or any subset of weekdays, you can set it once, or repeat any number of times, or indefinately, it does not have to be the active app to work, and it is free and already included on the iPhone.
Simply set a weekday alarm, set it to repeat M/T/W/T/F, set a weekend alarm to repeat every S/S, and that's it - unless I'm completely misreading the first part of the post.
Given what was posted as desired for the app's function, simple saying the built in clock's alarm is "carp" really doesn't add anything, since by all accounts it does actually do everything that the first part of the post wants.
Unless he wants an alarm function that automagically somehow knows which days to chime and which days to not?

License for testing and production systems

Hi Experts
Can any one help me out on implementing license in my B1 System.
According to our contract we have licensed following user types:
User Type
Licensed
AddOn Access License 25
Professional User 5
Software Development Kit - Development Version 20
We have Test/development system in one hardware and Production system on different hardware. Please advice me how to request/allocate license for my test/development system and production system.
We tried creating a Test System in SAP Market place and requested license for test system. While requesting license for production system, it is found that the license is exceeded. In other words, developent system license also counted.
Please advice me on the best practices of B1 license implementation.
Thanks and regards
Ajith G

Hi,
Our customer wants to Keep the production data secure. Developers and consultants should not have the access to it.
Then you have only two options:
1.Either you should maintain a standalone b1 server for the developers and consultants to test their solutions and scenarios.
2.Otherwise you can create users in sql studio for accessing only the test database.
So that as per your requirement
All configurations and sample data will be kept in a test environment where developers and consultants can do their work.Once everything is correct Admin will do the transfer to production.
Note:New users can be created in the sql studio under Databases-><Company Db>->Security->Users, Rt.click new user

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

contact itunes support

LightDM greeter for a single-user system

I'm interested in using lightDM as my display manager. However, there seem to be a lot of greeters that are focused on a good experience for multi-user systems. All I'm have is a single-user system, so I'm looking for your guy's opinions on what the "best" lightDM greeter is for a single-user system. I want it to:
* Be pretty, even if it must be a bit more heavyweight. I consider "pretty" to mean modern/flat
* Be customizeable, hopefully with at LEAST customizeable colors, and preferably background images
* Have either a very modern/flat icon set, if there are icons at all, or customizeable icons
* Not force me to select my account every time I login, it should automatically "select" my account so all I have to do is enter the password. I *might* budge on this one if the design is *really* good
I'm ok if it has support for multiple users (I'm pretty sure every greeter out there will have that), but I don't want it to reserve too much space on the screen for multiple users, and I want it to still be good with one user. For example, I don't want it to be like crowd greeter, where it's nearly useless without many user accounts

Why not just test a number of greeters and evaluate which one most suits your use case? That's the common approach with most things.
You could also try other DMs like LXDM for example, in order to see how they compare.

CUCM ALARMS for EPS (EMERGENCY PAGING SYSTEMS)

Similar Messages

Maybe you are looking for