CUCM demo license question

Hello.
We use  two nodes of CUCM 7.1 and we have permanent device license. Now we'd like to increase amount of phones for a short time. I downloaded 3-monthes demo license for 500 units (the file in attachment). So my question is - how I should add this license correctly? Should I edit this file in some way before uplouding to a server? What will be with our permanent license? What will happen after 3 months? We just lose additional 500 units or it could affect the permanent license?
I would very thankful for any answers.
Ruslan               

Ruslan,              
All licenses on CUCM are cumulative and they do not overwrite previous licenses. So, simply upload this licenses (assuming it is for the correct MAC) on the publisher. There is no limit as to how many licenses you can have AFAIK.
HTH,
Chris

Similar Messages

  • CUCM Demo License Renewal

         i believe my demo license may have expired.  i can access all the cucm node servers in the cluster but not the activity buttons within each service(admin,serviceability,etc) . i get this msg on the admin page:
    Licensing Warnings:
    System is operating on Demo licenses. Please upload relevant license files
      what's the process/steps to renew the demo license?           

    Its called buy licensing at this point.   The demo license does not run more than 1 or two nodes.  So not sure how many nodes you have or trying to activate. Usually you can only activate a single node (Publisher) on the Demo license in 8.6

  • CUCM Demo License

    Hello,
    I running CUCM with demo license is there a time limit to use this demo licenses?
    Regards
    Leonardo Santana           

    This is no longer true starting with ELM on CUCM 9.0. There are no licenses installed by default and ELM will shutdown the products after a grace period.
    A 60 day grace period allows administrators to add users even if insufficient licenses exist within the ELM license pool. If sufficient licenses are not available once the 60 day grace period expires, then the Unified Communications application(s) will no longer allow any further changes; however, the application(s) will continue to function with no loss of service.
    Unity Connection will outright halt services when the grace period expires.
    Your only path for a permanent lab/demo would be to purchase an NFR kit.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • CUCM 10.x Demo licenses

    Hello, it may be bug or something like that, but the fact is that when I try to get demo licenses for CUCM 10.0 via cisco.com/go/license and choose licenses for 10.x I get licenses for 9.x versions.
    Where can I get demo licenses for CUCM 10.x or may be convert demos for 9.x?

    We installed CUCM 10 more than a month ago, made integration with CUCM 9 and Avaya and then there were many holidays in Russia and nothing was done for testing purposes, but Cisco Licensing Team ([email protected]) helped me a lot and i got some demo licenses

  • CUCM Licensing/ordering and demo licenses

    Hello,
    I am trying to setup a lab with CUCM and trying to figure out the process to place an order for CUCM. I know that you need DLU licneses for each phone, however do I need to buy a base license in addition to that? How does it work?
    Also, does CUCM come with a demo license which I can use for my lab without ordering any additional licenses??
    What are my options?
    I alos tried to search the part/product numbers for CUCM ordering but was not able to find them on Cisco site. I am interested in buying CUCM 7.x.
    Thank you.

    Hi there,
    The Part# you would be looking for is;
    CM7.1-K9-LAB
    SW Unified CM 7.1 Appliance, 100 DLUs, Lab System Only
    This comes with licensing for 2 Nodes, Software (DVD's) and 100 DLU's which
    is good for approx. 20 phones I believe the End of Sale for this is June of this year.
    Cheers!
    Rob
    "Everything is broken" - Bob Dylan

  • Demo license in CUCM 9.1

    Does anybody knows in a CUCM 9.1 with a demo license, how many devices i can install? in cucm 8.X for example in system > licenses i can see how many DLUs i have and how many devices can install, in cucm as work with CUWL does not show anything, all is 0 as show
    In ELM i can not see anything.
    Thanks!

    You can get a six month demo license at cisco.com/go/license with the following licensing:
    Cisco Unified Communications Demo License Version 9.x
    - 20 CUWL PRO Unified Communications Manager licenses
    - 20 CUWL PRO Unity Connection licenses
    - 5 TelePresence Room licensesPlease note: The term for this demo license is 6 months

  • CUCM 7 - Activate Demo Licenses

    Hi all,
    I got a CUCM Demo version from my compnay for trial before implementing CUCM 7 company wide.
    As I installed the application I had no problems, however, when I try now to access the GUI / Devices / Phones and add a phone I get this error msg :
    Add failed: [4935] allocated licenses consumed by  used and pending. Please u[pload additional licenses and try again
    How can I activate the Demo license so I can add a Phone for trial purpose?
    Not sure if that is in regards to this, but if I try to start Cisco Call Manager the below error appears (Picture)
    As you can see from the Picture I have 150 licenses, but what am I doing wrong?
    Thanks,
    Chris

    Hello,
    As per the previous recommendation you should be able to restart 'License Manager' service under Network Services in Servicability. That should help clear the issue. If that does not help, you could open a case with Licensing  and they can generate 'temporary licenses' which expire after a certain time period.
    Hope this helps!
    Vajrender

  • CUCM 9.1.2 - add demo licenses to existing

    Hi guys,
    Does anybody know what will happen if I add demo licenses for CUCM 9.1.2 in addition to existing permanent licenses? Is it possible and working solution? The goal is to extend the number of existing licenses for short period of time until additional permanent licenses will be purchased.
    Thanks!
    Kind regards,
    Andrew C.       

    Hi Andrew,
    I doubt you can do it again since you have already exceeded the 60 days period.
    Try deleting them for Call manager and add them, re-synchronise , if it helps .
    you can refer the link
    https://supportforums.cisco.com/message/4152401#4152401
    regds,
    aman

  • Demo License on BE3000

    Hi all
    Kindly need your help. I'm gonna deploy BE3000 with 6921-CBE-K9 handset. The problem is my 6921-CBE-K9 will be late on arrival.
    I have 6921-C-K9 and I know that phone is not bundled with license.
    The Question is how many license I can get if I use demo license for BE3000? Because I need to deploy 50 endpoint using 6921-C-K9 with BE3000 as a call manager. Is it enough?
    As I know, when we request demo license for CUCM 8x it will be give about 300-500 license (CMIIW) and it should be support for about more than 100 endpoint using 6921.
    Best Regards,
    Nanda Nurhadyan       

    I've been trying today to install my demo license that I request from
    https://tools.cisco.com/SWIFT/LicensingUI/loadDemoLicensee?FormId=9036
    But The result message is :
    The File Upload failed for CUCMBE3KEVAL201303220302187100.lic because of a system error.
    The Question is :
    Can I install this demo license without connected to internet. Or it must be connected to internet ?
    Best Regards,
    Nanda Nurhadyan

  • Cisco UCCX 9.0.2.10000-71 - Demo License Issues

    Hello Cisco Support,
    I have installed Cisco Unified Contact Express 9.0.2.10000-71 on a Cisco UCS C220 M3 Server and have used the demo license that comes with the ISO Image on the server. After install, I have used the Premium Demo License. I have integrated UCCX 9.0 with CUCM 8.6(2) SU2. 
    I can say that everything worked fine until I wanted to test the Cisco Agent Desktop (CAD), Cisco Supervisor Desktop (CSD) and Cisco Agent IP Phone Service.
    I am pretty much sure that the configuration on either the CUCM, UCCX is set up correctly but I might miss something.
    When I tried to fire up the CAD or CSD, I am getting the following error message: "A licensing error has occurred. Please try again in five minutes. If the problem persists, please see your log files or System Administrator for details". then followed by License Server is down.
    I have also setup Agent IP Phone Service on the CUCM and each time I select the Service on the IP Phone, an error stating that could not connect to the IP Phone Agent Service.
    Below is the information for my setup:
    admin:show uccx version 
     Active UCCX Version: 9.0.2.10000-71
     Inactive UCCX Version: NA
    admin:show uccx license
    Configured Licenses:
    Package: Cisco Unified CCX Premium
    IVR Port(s): 50
    Cisco Unified CCX Premium Seat(s): 25
    High Availability : Enabled
    Cisco Unified CCX Preview Outbound Dialer: Enabled
    Cisco Unified CCX Quality Manager Seat(s): 25
    Cisco Unified CCX Advanced Quality Manager Seat(s): 25
    Cisco Unified CCX Workforce Manager Seat(s): 25
    Cisco Unified CCX Compliance Recording Seat(s): 50
    Cisco Unified CCX Maximum Agents: 400
    Cisco Unified CCX Licensed Outbound IVR Port(s): 25
    For dynamic content like the Inbound ports in use and Outbound ports available and in use please check using the Cisco Unified CCX Administration.
     Command successful.
    Could you please help me out figure out what could be the cause of me failing to log onto the CAD/CSD and also IP Phone Agent Service?
    Warm regards,
    JK.

    Hello Aman,
    Thanks for the link.
    How do I go about turning off the the SYN Flood Detection Mode state in Option 2 on the UCCX Server.
    Option 2: Turn off SYN Flood detection mode. Risk: Leaves the server open to SYN Flood.
    I have checked and my Windows XP SP3 computer where Cisco Agent Desktop is installed has Windows Firewall set to off at the moment.
    Warm regards,
    JK.

  • CUCMBE5K - 8.5.1 Node Demo License

    Hi all,
    I have a CUCMBE5K platform that has an issue where the Node License is running as a Demo license. I do not know how long it has been in this state since I have just recently started a new job. According to this article, a demo license that is used in production on 8.5.1 does not have a time limit, but it will limit the system to 50 DLU's.
    On my platform, it appears there are 260 DLU's currently active which have a status of uploaded. What I'm trying to find out is, what are the true limitiations of the node demo license? We are getting ready to open a new office and I am concerned that I will not be able to continue adding DLU's to the system until the node license is resolved. I have had extreme difficulty in trying to get a partner to supply us with a proper node license.
    Thanks in advance,
    Stephen

    Got a question.
    I'm using a HP MCS 7845 server with CME 7.1 in demo license mode. Also I have 5 7960 phones. So, can I use all the features such as SRST to practice for the voice exams with the demo license ?
    Any help is always appreciated.
    Sent from Cisco Technical Support iPhone App

  • Can I use ISE demo license for wireless purposes???

    Hi all.
    We want to try an ISE deployment with one or two WLC and the license twe want to use initially is the demo embedded in the ISE appliance. We don't know whether we can do it because demo license covers base and advanced capabilities but not wireless (at least in administration/licensing this box shows "not installed" leyend) and we don't know whether a demo tape of wireless solution will work with this type of licensing; if not, is it possible to get a demo wireless license for ISE?
    Thanks.
    Best Regards.

    The evaluation license does cover the wireless. Its actaully a full license.
    Thanks,
    Scott
    Help out other by using the rating system and marking answered questions as "Answered"

  • Newbie: Veritas (VxVM 4.1) License question

    Hello fellow Admins,
    This is my first upgrade from using a DEMO license to a Perm. license on Veritas Volume Manager.
    During an upgrade on one of our production systems we used a DEMO license to start and configure all Veritas Volumes on the new sever. Once everything was up and running we shutdown the old server and migrated the old 3.2 license to become a 4.1 license. I have successfully applied it now on my Solaris 10 server.
    Now to my questions:
    When i run 'vxlicrep' the systems displays both the Demo license and the new permanent license. I have ~10days left on the Demo license.
    Can i remove the Demo license under /etc/vx/licenses/lic/*.vxlic or does the system automatically start using the Permanent License once the Demo has expired.
    Is there a reboot needed to activate the perm lic?
    Regards,
    Pierre

    Case closed.
    I was sort of on the right track. After deleting the .vxlic file one has to init the daemon for the new license.
    1, Delete or Move the license key file in /etc/vx/licenses/lic/*.vxlic
    2, Then issue: vxdctl license init [enter]
    vxdctl license init forces vxconfigd to rescan the licenses and make the new licenses available.
    Regards,
    Pierre

  • Demo License UCCX 8.5(1)

    Is there a demo license on the disc?  Can someone upload it possibly?
    Chad

    Got a question.
    I'm using a HP MCS 7845 server with CME 7.1 in demo license mode. Also I have 5 7960 phones. So, can I use all the features such as SRST to practice for the voice exams with the demo license ?
    Any help is always appreciated.
    Sent from Cisco Technical Support iPhone App

  • Cisco Web Security Virtual Appliance Demo license?

    Is there a demo license available to test Cisco Web Security Virtual Appliance?
    Regards.

    Thank you so much Kasper! You are an angel fallen from heaven!
    Just 1 question, when I am ready to get the License appears the next information, do you know if the number 1 in the Qty column means 1 demo for just 1 user? Or do you know if I can get 1 demo for many users?
    Regards!
    NA
    SKU Name
    Qty
    Ordered
    Available
    Quantity Added
    -->License Start Date:
    License End Date:
    1
    WSA-WSP-45D 
    1-->
    1
    -->1
    03/13/2014
    04/27/2014

Maybe you are looking for