CUCM full configuration in text format

Dear All,
Can we pull out the CUCM full configuration in text format ?
Actually one of My customer wants CUCM' confiuration in text format to check feasibility to add CUCM to "Device Expert" like switches, router etc.
Below is the overview of Device Expert, FYI:
DeviceExpert is a web–based, multi vendor network change, configuration and compliance management (NCCCM) solution for switches, routers, firewalls and other network devices. Trusted by thousands of network administrators around the world, DeviceExpert helps automate and take total control of the entire life cycle of device configuration management.
Best Regards,
Suresh

I'm sorry, I don't know. You'll have to ask a Device Expert expert ;-)
From your description (and a 1 second glance at their website), it looks like Device Expert expects something like an IOS command interface where you can configure the device and do something like a "sh run" to get it's configuration. Standard stuff for switches and routers. Not so standard for voice.
NOTE: If you're using CUCM Express, then yes, you can, as CUCME is IOS based, so all its config is there within the IOS "sh run" output. But the full blown CUCM is a very different beast, has a rather large database schema behind it and is usually configured via a web UI.
GTG
Please rate all helpful posts.

Similar Messages

Force email download in HTML or text format on iPhone/iPad with ActiveSync (Exchange 2010 SP3)

Hi,
When an HTML email with attachment is received on iPhone/iPad (iOS 8.2),
it can be downloaded in three cases of
intermittents ways :
- The full message is downloaded in HTML format
- The message is download in text format and a
"Download full message" link is displayed
at the bottom of the message
- The message is displayed in text format,
but continues to download the rest of the message.
When the download is complete, the message is displayed
in HTML format.
This behavior is intermittent. The Apple's support
says it is a particular configuration on Exchange server
that causes this behavior.
I want to know if there is a way to fix
this problem and force download email
either in text or HTML format ?
This problem occurs on iPhones/iPad
(iOS8.2) with ActiveSync account (Exchange 2010
SP3). It occurs also with Outlook.com account.
On the Exchange 2010 SP3 server, The MaxEmailBodyTruncationSize
and MaxEmailHTMLBodyTruncationSize settings are
unlimited in ActiveSync policies.
Thank you for your help.

Hi,
We can configure Exchange ActiveSync Mailbox Policy Properties to force device download HTML or text format email.
Use the EMC to view or configure Exchange ActiveSync Mailbox Policy by the following steps:
In the console tree, navigate to Organization Configuration >
Client Access.
In the result pane, click the Exchange ActiveSync Mailbox Policies tab, and then select the policy you want to view or configure.
In the action pane, click Properties.
Under the Sync Settings tab, check or uncheck the box
Allow HTML-formatted e-mail. Select this check box to enable e-mail messages that are formatted in HTML to be synchronized to the mobile phone. If this check box isn't selected, all e-mail messages will be converted to plain text before synchronization.
And use this command to configure whether allow text messaging on the mobile phone. The Exchange Enterprise Client Access License is required to change the values of this setting.
Set-ActiveSyncMailboxPolicy -Identity PolicyName –AllowTextMessaging $True
For more information, please refer to this document.
https://technet.microsoft.com/en-us/library/bb123484(v=exchg.141).aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Reading Word attachments (with Rich Text Format) in Mail

I have difficulty opening "Word email attachments" that contain "Rich Text Format" using my ipod touch under the MAIL function. For normal Word documents, I have no issue at all. Can anyone help here? Thank you.

RTF contains alot of extra formatting junk that you need to be aware of, depends what you want to do with the files afte reading them in but JAVA has its own RTF parser standard. Be warned its not full proof.....
import java.io.*;
import java.util.StringTokenizer;
import javax.swing.text.rtf.RTFEditorKit;
import javax.swing.text.Document;
try {
      FileInputStream stream = new FileInputStream("C:/Document.rtf");
      RTFEditorKit kit = new RTFEditorKit();
      Document doc = kit.createDefaultDocument();
      kit.read(stream, doc, 0);
      String plainText = doc.getText(0, doc.getLength());
      BufferedReader br = new BufferedReader(new StringReader(plainText));
      String line = br.readLine();
      while (line != null) {
        StringTokenizer tok = new StringTokenizer(line, " ");
        while (tok.hasMoreTokens()) {
          System.out.print(tok.nextToken() + " ");
        System.out.println();
        line = br.readLine();
    } catch (Exception ex) {}

Idoc is recieved as xml format instead of text format

hi i am new to XI , I am right now i am trying with Idoc to file scenario
i am sending idoc from an R/3 system and i am receiving it as file in another R/3 system. In accordance to that i have designed & configured all settings, But when i am sending idoc thru my communication channel i am able view a '" *.txt " file with all my necessary details in xml format instead of text format.
desin details
my source and target fields are
FLCUSTOMER_CREATEFROMDATA idoc to the file which as the only few important fields of idoc.
configuration details
in communication cahnnel :
adapter type : file
message protocol: file
processing parameters:
constructution mode : create
file type : binary
advance mode
row.fieldNames : with its fields seperated buy comma
row.fieldSeparator : ,
row.endSeparator : 'nl'
i stuked up with this level for the past 10 days ur valuble suggestion will help me lot to reach my target
Regards
saravanakumar P.K.

You have selected the wrong message protocol: to get an file not XML you should select File Content converion as message protocol
change it to folowing
configuration details
in communication cahnnel :
adapter type : file
message protocol: file content conversion
processing parameters:
constructution mode : create
file type : binary
advance mode
row.fieldNames : with its fields seperated buy comma dnt use this
row.fieldSeparator : ,
row.endSeparator : 'nl'
specify only field sepratator and endseparator dnt have to specify fielnames for receiver adapter in contant conversion.

How to save TS type palette in a text format?

Hello,
I am currently using Teststand 4.0.1f1.
The problem I currently have is the fact the custom type palettes of teststand (.ini files) are saved in a binary format by default. I also heard that previous versions of TS allowed to save this file in a text format that could be read by any text reader (i.e. notepad, visual studio, notepad++, etc). Is it possible to save the custom type palettes of TS 4.0 in a text format instead of a binary format? And if it's possible, how can it be done?
Thank you in advance.

If you don't find the tab name File, it is most likely Preferences,
Configure>>Station Options>>Preferences>>File Format Options...
Thanks, I was looking for it as well recently
Mathieu

SSRS reports in text format

hi
how can i save a report in text format using ssrs 2008 R2

Hi Gourav,
By default, SQL Server Reporting Services render a report to .CSV File Extension with CSV rendering extension. While device information settings for the CSV rendering extension allow us to change its format from .csv to .txt format, we can modify FileExtension
setting in the RSReportserver.config file as below:
Please navigate to RSReportserver.config file: <drive:>\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\RSReportserver.config.
Backup the RSReportserver.config file before we modify it, open the RSReportserver.config file with Notepad format.
In the <Render> section, modify the code for the CSV extension like this:
<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
   <OverrideNames>
        <Name Language="en-US">TXT (Pipe Delimited Text File)</Name>
    </OverrideNames>
    <Configuration>
        <DeviceInfo>
            <FileExtension>TXT</FileExtension>
        </DeviceInfo>
    </Configuration>
</Extension>
Save the RSReportserver.config file.
For more information about CSV Device Information Settings, please see:
http://msdn.microsoft.com/en-us/library/ms155365(v=sql.105).aspx
If you have any other questions, please feel free to ask.
Thanks,
Katherine xiong
Katherine Xiong
TechNet Community Support

PDF to Text format

Hi All,
Scenario: PDF to Text format
I have to create an interface in which the sender file is in PDF format which has to pass to the recvr system in text format thru PI.
Kindly guie me the adapters to be used at sender side and also tell me if there is any special condition to be followed to configure this scenario.
Thanks in Advance.
Madhvi

Hi ,
Plse see the below thread
PI 7.1 : Taking a input PDF file and mapping it to a hexBinary attribute
It will help you.
You can write custom adapter modules:
Java Mappingh;
SAP Conversion agent:
http://www.riyaz.net/blog/parsing-pdf-files-using-sap-conversion-agent-part-i/technology/sap/628/
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/content.htm

ReportEntry Text Format

Question No 1.
Is there any documentation available on the ReportEntry Text Format . Lets say for the Numeric tests I see some entry like this
Limits:
Low: 49.25
High: 50.25
~
How would it look like for other type of test steps ?
I want to change them to another format in the ModifyReport Callback and the parsing function(s) needs to know what text will be sent to it by TS.
I am using Testand3.0.
Question No 2.
Also this new format has to be generated along with the existing one. Do I have to write a custom routine that creates a file and appends all these entries to this file and then closes this file some where in the ssequence file?
Like I said I still need the existing report format also as the operators have got used to looking at it . The new extra format is to fecilitate some other automation tool to collect these reports data automatically.I already have the ModifyReport used once, so do I just copy some of the test report generation steps to generate another report - what's the best of doing please sugggest.
Thanks
Sumit

Hi
The TestReport callback in the ProcessModel for your sequence file is where the ResultsList returned from your sequence file is processed into the format that is seen in the results file. You can choose to override this callback in your sequence file or modify it directly in the process model. If you want the same modifications to appear in the test report for multiple different sequence files I suggest you modify the ProcessModel directly.
NOTE. Be sure to copy the NI ProcessModel you are using to your User directory before commencing your edits.
Question 1
One way to get the test report format is create a dummy sequence and run it, this will be useful later when you are testing your modifications.
You can also modify the results format from Configure->Report Options in the sequence editor.
Question 2
If you want to maintain the old report you will have to create new steps to process the ResultsList to create, populate and save your new format. Take a look at how the existing steps manipulate the results data, these will get you thinking about what is required.
Regards
Steve
There are 10 types of people in the world that understand binary, those that do and those that don't.

Mail.app - Moving email with attachment to a subfolder causes the email to convert to text format and lose the attachment

I am Lion on Mac Book pro.
When I move a mail with attachement to a folder, sometimes, it loses its mime-type and becomes a text formatted message. Hence the contents of the attachments are added as text to the mail and I cannot download the attachments then.
This does not happen always, but almost 3/10 times.
Thanks.
Regards,
Viraj

What type of mail account is this (POP, IMAP, .Mac)? If IMAP or .Mac, what are your Preferences > Accounts > Mailbox Behaviors > Drafts settings?
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Turn OFF all the port configurations except the one needed to connect to Internet and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
Open Keychain Access > Keychain First Aid and verify/repair the keychain.
Try also turning OFF the Search For Certificates options in Keychain Access > Preferences if any of them is ON — take a look at the following articles for more information on this particular issue:
http://www.hawkwings.net/2006/07/18/apple-mail-phones-home-too/
http://www.macgeekery.com/tips/mailapp_doesnt_phone_homeeither/

DateValidator, Configuration error: Incorrect formatting string

Hi guys,
I am struggling with a DateValidator issue, I hope someone can help me
Here is the parts of code needed to check what's wrong:
public const DATE_FORMAT:String = "DD/MMMM/YYYY";
<mx:DateFormatter id="dateFormatter" formatString="{DATE_FORMAT}" />
<mx:DateValidator
id="firstDateValidator" inputFormat="{DATE_FORMAT}" required="true"
source="{firstDate}" property="text" />
<mx:DateFiel id="firstDate" labelFunction="doLabel" />
private function doLabel(item:Date):String
     return dateFormatter.format(item);
I need to format and validate the following example: 13/January/2011
When I use DATE_FORMAT = "DD/MM/YYYY", I have no problem to format and validate the Datefield, I have 13/01/2011.
But when I use DATE_FORMAT = "DD/MMMM/YYYY", I have the following error message with the validator (the formatter is working well):
Configuration error: Incorrect formatting string.
Thank you very much for your help.

Standard Flex validator out of the box is very fragile when it comes to validate "non-standard" date formats. You should extend this DateValidator with your own version like I do, that re-implements "format" function call and rewrites private function "validateFormatString" from the the scratch.
Here is the my implementation of this function:
private static function validateFormatString(validator : DateRangeValidator,
                                                     separatorSign : String,
                                                     formatPartsArray : Array,
                                                     baseField : String) : ValidationResult {
            var formatPartsValidationObject : Object = {dayValid : false,
                monthValid : false,
                yearValid : false};
            var formatsLength : int = formatPartsArray.length;
            var mask:String;
            for (var i : int = 0; i < formatsLength; i++) {
                mask = formatPartsArray[i];
                switch (mask) {
                    case "M" :
                    case "MM" :
                    case "MMM" :
                    case "MMMM" :
                        formatPartsValidationObject.monthValid = true;
                        break;
                    case "YY" :
                    case "YYYY" :
                        formatPartsValidationObject.yearValid = true;
                        break;
                    case "D" :
                    case "DD" :
                        formatPartsValidationObject.dayValid = true;
                        break;
            if (formatPartsValidationObject.monthValid &&
                formatPartsValidationObject.dayValid &&
                formatPartsValidationObject.yearValid) {
                return null; // Passes format validation
            } else {
                return new ValidationResult(
                    true, baseField, "format",
                    validator.formatError);
formatPartsArray is calculated as follows:
var formatPartsArray : Array = inputFormat.split("/");

How to provide text formatting options to user from a text field

Hi,
My requirement is - in the interactive form, a comments field needs to be provided where user should be able to enter text with formatting options like
Headers
indentations
bold/italic
bullet points and numbers
Once user enters the formatted texts in a text field, data needs to be displayed/printed in the same format. Could you help me on how to provide these formatting options to the user for a particular text field?
I understand that once I define the text field with format XHTML (with RTF), user formatting can be captured and displayed in the same way. But I am not sure on how to provide the formatting options for the text field.
Thank you,
Madhu

Hi,
if you select a text field for Rich Text and the press Ctrl + E you'll get a bar for all available text formatting options in Acrobat/Reader.

Text formatting options

Hi,
Is there a list somewhere which outlines more text formatting options than what is shown in the FAQ?
In particular I'm wondering how to make text that does not suppress white space other than using the "code" tag.
Also, the insert link option a shown above does not seem to work, or am I just stupid?
Thanks.

Dude wrote:
Also, the insert link option a shown above does not seem to work, or am I just stupid?That one has not been working for a couple of years or so. There should be a thread about it in this forum.
Instead, I'm using [ url=<insert link here> ] text [ /url ] (without the extra spaces in tags). Normal html link tag might work as well.

How can I show only text edits and not text formatting when using print comments summary?

Acrobat 9.3.0 for Mac.
Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
I only want to show text edits, not text formatting changes. So questions are:
1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

How do I enable bold/italic text formatting in blog module on website?

For some reason I can't figure out how to enable more text formatting options on our blog. We used the blog module on a muse template. I customized the module to apply fonts we used on our website. The main text on the blog is Lato.
Link to blog: Coupar Consulting
When we go in to write a post you can use the bold/italics options and it shows up in the edit window as shown in the screenshot below:
The font is not correct, but because I set the font in the module to use Lato it does show as lato when you publish, see preview below (notice no bold or italic text):
What am I missing??
Thanks in advance!!

Use your browsers console and inspect tool. This stuff becomes very easy.
address,caption,cite,code,dfn,em,strong,th,var,optgroup
font-style: inherit;
font-weight: inherit;
Line 34 ish in - http://www.couparconsulting.com/css/site_global.css?3869595648
This overides the font bold style on strong.

Can't select vertical text formatting since Win 7

Please help.
Have recently upgraded to win 7 and now I cannot select any text formatting options in the drop down text menus. I can see them, but the drop down menu buttons don't work.
Has anyone had this happen?
I have spent so much time on the computer and it's so hard to get any work done.
Advice would be much appreciated
I would like to go back to XP but the computer guy says that's not possible.
Thanks
ZeeBud

Thank you so much for responding Peter. I feel one step closer to being able to get my work done.
Your solution means that I can now use the tools in the tools palette, but no luck with being able to use the text selection drop down menus.
It's quizzical. I can select the fonts by clicking through file the file path> type> font. Just not through drop downs.
Any thoughts anyone?
Zj

CUCM full configuration in text format

Similar Messages

Maybe you are looking for