CUCM Licensing/ordering and demo licenses

Hello,
I am trying to setup a lab with CUCM and trying to figure out the process to place an order for CUCM. I know that you need DLU licneses for each phone, however do I need to buy a base license in addition to that? How does it work?
Also, does CUCM come with a demo license which I can use for my lab without ordering any additional licenses??
What are my options?
I alos tried to search the part/product numbers for CUCM ordering but was not able to find them on Cisco site. I am interested in buying CUCM 7.x.
Thank you.

Hi there,
The Part# you would be looking for is;
CM7.1-K9-LAB
SW Unified CM 7.1 Appliance, 100 DLUs, Lab System Only
This comes with licensing for 2 Nodes, Software (DVD's) and 100 DLU's which
is good for approx. 20 phones I believe the End of Sale for this is June of this year.
Cheers!
Rob
"Everything is broken" - Bob Dylan

Similar Messages

In-house test and demo license

Some integration tests such as CA-DMI, BC-XOM, BC-SNC,etc. can not be performed via remote-access DPA systems. To overcome this problem, vendors can install SAP software on thier own sites, by purchasing a Test&Demo license.
Here is the information for Test&Demo license:
IDES Test & Demo License
It has never been easier to discover and demonstrate the world of mySAP Business Suite e-business solutions than with the Internet Demonstration and Evaluation System (IDES) with its preconfigured installation of mySAP Business Suite components, populated with the data and business processes of a fictional enterprise. This model corporation consists of several companies located around the globe with clearly defined and independent business tasks.
Interfaces, suitable for testing: AC-CCI, BC-CTS, BC-SNC, BC-SSF, BC-LDAP-USR, CA-DMI, CA-EDI, EP-IVW, FI-EDI, HR-OCI, IS-ADP, IS-B-DCH, IS-ITA, IS-T-EBC, IS-TAS, IS-TPS, IS-U-WM
Requirements: PC with moderate power and server operating system together with trained administrator to install and run SAP system.
How to obtain: In EMEAyou can order the Test & Demo License from the Software Partner Program (mailto:[email protected]). In the Americas, please contact SAP America at mailto:[email protected]

Hello Veeren,
Hope this helps:
Q. How to obtain access ?
Just contact the ICC guys <a href="http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc">http://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/sdnservices/icc</a> and they will help you out with this. We had a lovely experience with the consultants for our XI Content Certification.
Q. How long does this process take ?
In our case, it was less than a week.
Q. What's the cost ?
We were fortunate to do it during the promotional period and did not have to pay anything. The ICC consultant would help you with the details.
Q. How well does the system work ?
The system was quite fast and the access is via ITS / SAP GUI for HTML.
Q. Do you get access to only the built-in data or you can create your own ?
Besides the XI Server, it was an IDES system in our case and we were also able to create data.
All the best for your certification.
Regards,
Parag.

"lh license status" and "lh license set" result in ClassNotFoundException

Hi,
I have a problem with my completely clean installation of IDM 7.0.
Whenever I want to check or set the license using the commands "lh license status" and "lh license set" I get the error message "Problem during execution: java.lang.ClassNotFoundException: license".
The WSHOME environment variable is correctly set to the IDM root installation directory (C:\apache-tomcat-5.5.26\webapps\idm in my case).
Other commands such as "lh console" work correctly.
Any idea what is wrong here?
Thanks in advance,
David
Edited by: mistadub on Oct 27, 2008 10:15 AM

I have similar problem. I found even i DB entry with that license, but it seems oke for me. My difference is, that i am using IDM55 and trying to migrate to 6. Both need licence, but sometimes it happened even after some customization steps.
Is here somebody, who knows the princip, how is license key verified?

Lab Setup and Demo Licenses

I just set up a Call Manager on a VmWare server for a lab. My license server is started, and all services are activated and look great. My only issue is when I try to add a Cisco IP phone, it will not actually add the end point device. Do I have to get trial licenses to do this or am I just missing something?

Until 9.0(1) the system has a built-in 150 DLU/3 node demo license that gets used if you haven't uploaded any licenses. You can check System > Licensing > Report to see what it looks like. Note that the demo license does not include a SW Feature license so you will not be able to upgrade to 8.0 or newer.
If the demo license is intact and shows unallocated DLUs then your inability to add things suggests a database problem. Be sure that Informix is started and healthy.
Please remember to rate helpful responses and identify helpful or correct answers.

CUIC 8.5 License Upgrade (expired demo license)

Customer was using a 90 day evaluation license for CUIC. Product order for Premium license took longer than expected. We now have license in hand, however we cannot login to the system to apply the new license file. Error below...
Server does not have a valid license. Please contact the system administrator.
Is there a way to upload the license via the CLI? Any other method?

Hi,
Please refer the section "License" in the below link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/intelligence_suite/intelligence_suite_853/user/guide/OAMPGuide853.pdf
Thanks,
Anand

Samsung Galaxy S6 pre-order and demo unit?

The pre-orders go up tomorrow for AT&T (and T-Mobile) but none of the stores around me have ANY information. They've also not heard anything about the demo units they are supposed to have tomorrow. According to the Samsung website both of my local stores will be getting a demo unit but neither of them have any idea about it.
I don't care so much about the demo unit but I want to know what pre-order bonus Best Buy will be including? I've heard some talks about the wireless charger being included if you pre-order but T-Mobile is offering up on free year of Netflix if you pre-order through them. Could we get a clarification please?

Hello DextarRogue,
I really like it when a new device comes along that piques my interest. It really adds to the excitement of a new purchase for me. You ask really great questions about the Samsung Galaxy S6!
About the in-store demo: I recommend keeping in touch with your local store about this issue. As for special pre-order offerings, it looks there is an offering. Please visit BestBuy.com for more information.
I hope this helps. If you have more questions, please let me know.
Regards,
John|Social Media Specialist | Best Buy® Corporate
Private Message

For UFT 12.5 trail version, where to put Locking ID in HP License Portal and generate License Key?

I tried installing UFT 12.5 version. While launching UFT, it was asking me to generate License Key file. In the License portal->Activation->Certificates tab, when I put Locking ID and searched, it was throwing "No activation certificates were found for the search criteria you entered. Please search again." error message. Please help.

I am not able to post any queries in this site: http://h30499.www3.hp.com/t5/Functional-Testing-QTP-Support/tkb-p/sws-Fun_TEST_SF%40tkb Please help.

Re: Samsung Galaxy S6 pre-order and demo unit?

Do you know when the 128gb units will be available for pre-order?

Hello amichelle82,
It's great to hear you are interested in pre-ordering the Samsung Galaxy S6 with us! At this time, I would encourage you to keep an eye on BestBuy.com for changes in pre-ordering capabilities if you desire the 128GB model. If you should have any other questions, please let us know!
Cheers,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

CUCM 10.x Demo licenses

Hello, it may be bug or something like that, but the fact is that when I try to get demo licenses for CUCM 10.0 via cisco.com/go/license and choose licenses for 10.x I get licenses for 9.x versions.
Where can I get demo licenses for CUCM 10.x or may be convert demos for 9.x?

We installed CUCM 10 more than a month ago, made integration with CUCM 9 and Avaya and then there were many holidays in Russia and nothing was done for testing purposes, but Cisco Licensing Team ([email protected]) helped me a lot and i got some demo licenses

CUCM demo license question

Hello.
We use two nodes of CUCM 7.1 and we have permanent device license. Now we'd like to increase amount of phones for a short time. I downloaded 3-monthes demo license for 500 units (the file in attachment). So my question is - how I should add this license correctly? Should I edit this file in some way before uplouding to a server? What will be with our permanent license? What will happen after 3 months? We just lose additional 500 units or it could affect the permanent license?
I would very thankful for any answers.
Ruslan

Ruslan,
All licenses on CUCM are cumulative and they do not overwrite previous licenses. So, simply upload this licenses (assuming it is for the correct MAC) on the publisher. There is no limit as to how many licenses you can have AFAIK.
HTH,
Chris

Demo license in CUCM 9.1

Does anybody knows in a CUCM 9.1 with a demo license, how many devices i can install? in cucm 8.X for example in system > licenses i can see how many DLUs i have and how many devices can install, in cucm as work with CUWL does not show anything, all is 0 as show
In ELM i can not see anything.
Thanks!

You can get a six month demo license at cisco.com/go/license with the following licensing:
Cisco Unified Communications Demo License Version 9.x
- 20 CUWL PRO Unified Communications Manager licenses
- 20 CUWL PRO Unity Connection licenses
- 5 TelePresence Room licensesPlease note: The term for this demo license is 6 months

CUCM Demo License

Hello,
I running CUCM with demo license is there a time limit to use this demo licenses?
Regards
Leonardo Santana

This is no longer true starting with ELM on CUCM 9.0. There are no licenses installed by default and ELM will shutdown the products after a grace period.
A 60 day grace period allows administrators to add users even if insufficient licenses exist within the ELM license pool. If sufficient licenses are not available once the 60 day grace period expires, then the Unified Communications application(s) will no longer allow any further changes; however, the application(s) will continue to function with no loss of service.
Unity Connection will outright halt services when the grace period expires.
Your only path for a permanent lab/demo would be to purchase an NFR kit.
Please remember to rate helpful responses and identify helpful or correct answers.

CUCM 7 - Activate Demo Licenses

Hi all,
I got a CUCM Demo version from my compnay for trial before implementing CUCM 7 company wide.
As I installed the application I had no problems, however, when I try now to access the GUI / Devices / Phones and add a phone I get this error msg :
Add failed: [4935] allocated licenses consumed by used and pending. Please u[pload additional licenses and try again
How can I activate the Demo license so I can add a Phone for trial purpose?
Not sure if that is in regards to this, but if I try to start Cisco Call Manager the below error appears (Picture)
As you can see from the Picture I have 150 licenses, but what am I doing wrong?
Thanks,
Chris

Hello,
As per the previous recommendation you should be able to restart 'License Manager' service under Network Services in Servicability. That should help clear the issue. If that does not help, you could open a case with Licensing and they can generate 'temporary licenses' which expire after a certain time period.
Hope this helps!
Vajrender

CUCM 9.1.2 - add demo licenses to existing

Hi guys,
Does anybody know what will happen if I add demo licenses for CUCM 9.1.2 in addition to existing permanent licenses? Is it possible and working solution? The goal is to extend the number of existing licenses for short period of time until additional permanent licenses will be purchased.
Thanks!
Kind regards,
Andrew C.

Hi Andrew,
I doubt you can do it again since you have already exceeded the 60 days period.
Try deleting them for Call manager and add them, re-synchronise , if it helps .
you can refer the link
https://supportforums.cisco.com/message/4152401#4152401
regds,
aman

WebTools Demo License installed and now sap clients can't connect.

Hi,
I have installed a WebTools Demo License on the SAP/SQL Server. Now, SAP Clients from the other computers cann't connect to SAP, the error is:
Connection Failed:
SQL State: 08001
SQL Server Error: 233
Best Regards,
Kafil Shumon.

Hi Bryce,
Thanks very much for the reply. Somehow windows firewall got enabled and that's why we were not able to connect.
Now, I have already installed the "Demo WebTools License" for testing at the customer site. Now, how do I go back to the Initial "License Request" page so that a "test server license" can be requested?
Thanks,
Kafil Shumon.

CUCM Licensing/ordering and demo licenses

Similar Messages

Maybe you are looking for