CUCM Line Group 2 Not Ringing Phone
Good morning,
I have encountered a weird issue and was wonder if anyone here could provide some insight before I send it up to TAC.
I have a Hunt Pilot (HP)/ Hunt List (HL) and the HL has 3 Line Groups (LG) associated to it. Example LG configuration is below.
LG1: 1001, 1002, 1003
LG2: 1001, 1002, 1003, 1004
LG3: 1001, 1002, 1003, 1004, 1005
All LGs are set to RNA of 15s and broadcast.
Call comes in and hits LG1. 1001, and 1002 are on the phone so they do not receive a notification and 1003 just doesn't answer call even though 1003 is the only one ringing. Call rolls to LG2 and 1001, and 1002 are still on phone, but 1003 and 1004 don't answer even though those two phones are only ringing. Before the call rolls to LG3, 1001 hangs up the phone. Now when the call rolls to LG3, 1001 doesn't ring. The only phones that ring are now 1003, 1004, and 1005. 1002 is still on the phone from the beginning and this is expected of course but why doesn't 1001 ring even though the phone is on hook and was put on hook before the call went to LG3?
Phone Types: 6921, 7821, 7942, 7962
Phone FW: 6921 - SCCP 9.4.1.3, 7942 - SCCP 9.3.1ES13, 7962 - SCCP 9.3.1ES13, 7821 - 10.1.1ES6
CM Version: 9.1.2.10000-28
Thanks,
Anyone?
Similar Messages
-
Shared line sometimes does not ring on some phones
I'm having a strange issue that appeared a couple of weeks ago. I have not made any upgrades since October so I don't think that's the issue. I'm running CUCM 8.5.1.15900-4.
The issue is that one of my phone's shared line appearance does not ring while the others are ringing. It seems like that phone is omitted from the broadcast sometimes. This doesn't happen all the time. Most of the time, all the phones with the shared line appearance will ring. I'm not sure if it is only happening on this phone. It is very hard to reproduce.
Has anyone had this issue? What are some debugs I can collect to show what physical phones CUCM is ringing when the calls are coming in. I want to confirm that it is omitting that particular phone.
VinceHi Jeff,
I never went as far as to open a TAC case.
Most things I tried have corrected the issue temporarily (resetting the DN in CUCM, resetting the phones, upgrading firmware). I acutally upgraded CUCM from 8.6 to 9.1.2 just under a year ago and haven't had the "ringing" issue on the shared line since then. Not entirely sure if that was the reason though.
Since that upgrade I have other issues with this same shared line, most notably held calls not showing up on all the phones at intermittent times. 9 times out of 10 resetting the DN corrects this for about 6 months. That other 1 time, a reset via CUCM doesn't actually reset the phone and I either have to physically unplug power from the phone or do a shut/no shut on the switchport (effectively power cycling the phone).
I've created a job under bulk administration that resets the phones once a week (during closed hours). My thinking was these phones are like computers and need to be rebooted every now and again.... -
Extension not ringing in hunt group
Callmanager 8 environment (2 subs, 1 pub). There are four extensions in a hunt group and one of them stopped ringing today when you dial the hunt pilot. No recent changes to CUCM were made prior to this occurring.
I have tried the following:
1) Removed the extension from line group, reset hunt list, added it back to the hunt list and reset hunt list again.
2) Had the user unplug his phone and plug it back in to force a restart.
3) Remote-reset the phone from CUCM
4) Deleted the hunt pilot, list, and line group and rebuilt them then reset the hunt list
5) Deleted the phone from CUCM and reprogrammed it then reset the hunt list
6) Replaced the phone with a brand new phone and reset the hunt list
I can direct dial the phone extension and if someone forwards their phone to this extension it rings as well. Any ideas would be appreciated.
Thanks
MattAll,
I just got confirmation that the hunt group is now working. Although I cannot say for sure which changes actually fixed the problem it was some combination of the following:
1) Removed unassociated Line 5 instance of the extension (found in Route Plan Report)
2) Restarted all 3 CUCM servers (per recommendation from a Cisco contractor we worked with last night)
3) Changed RNA settings from 25 to 10 seconds
4) Disabled forwarding of 2 other extensions in the line group
5) Unchecked the "logged into hunt group" box, reset the phone, applied the setting again, reset the phone again
Thank you for everyone's help, much appreciated.
Matt -
HT4515 phone does not ring during incomming call
phone does not ring during incomming call
Is the phone silenced? Check the button on the side of the phone above the volume buttons if you see an orange line it is silienced, slide it to the front of the phone and it should correct this. Also ensure the volume is up. If you've checked these and still nothing are you able to call people? do you have service?
-
HT1688 phone makes no noise, will not ring and cannot turn ringer up
phone makes no noise, will not ring and cannot turn ringer up
Did you check the silence/mute switch on the side of the phone above the vollume buttons? If you can see an orange line then it wont make any noise. You should flip it and it should work.
-
Phone does not ring on incoming calls
Hi,
I hope someone can help or advise on my issue - see points 3 and 4.
1. Tested with 2 analogue phones - 1 phone definetley known to be working at a separate location - and a mobile phone.
2. All tests conducted twice - at master socket and internal test socket/ ALL other extensions& broadband line connections removed during testing.
3. Incoming calls do not ring on the analogue phones, but calls can be answered if analogue phone is picked up.
4. When hanging up on an incoming call, the analogue phones do not kill the open line. I have to terminate the call on the mobile as well.
5. Outgoing calls can be made and picked up by mobile with no issues.
6. Online BT Line Check reports no faults on the line.
7. Both analogue phones were checked to make sure they are not in silent mode.
Anyone have any ideas or suggestions?
Thanks
BenI had this problem recently - caused by a fault in the BT line box just outside the house.
3. If you ring your number from a mobile do you hear the phone ringing in the mobile? I my case there was just a short ring heard in the mobile and then silence - picking up analogue phone you could then talk to mobile.
3. This is normal. Reverse cleardown takes some time - I think it is about 10 mins. I often use this feature when I pick up a call on one phone and want to move to another extension. I just replace the first phone, so no phones are connected, then go to the other extension and pick up the call.
Peter -
Have an iPhone 5. Phone does not ring when calls come in and texts sent from non-iPhones are delayed by 4-5 hours before receiving.
This morning I woke up thinking that I should turn off my iPhone and then call it from a land line. If the problem is the network then there would be a delay before I heard ringing.
I turned my iPhone off and called it. Right away I heard my message.
I turned my iPhone back on and called it. It rang right away!
So, did Virgin Mobile fix the problem or did turning my iPhone off fix the problem?
I don't know, but I'll take either. I do know that Virgin Mobile said it would be four days to check the problem. Did the problem get fixed yesterday when the four business days were up. I do know that I've had my iPhone on for a long, long time. Did upgrading to 6.1.1 or 6.1.2 cause the problem and turning my iPhone off reset my iPhone?
If you have delayed ringing problem and turning your iPhone off and on again resolved it, please post a note here.
P.S. I did call Virgin Mobile and its records show the investigation is still open. I hope my points get passed on to the investigators.
P.P.S. Reading my notes, I had turned my iPhone off and on last week. Maybe it's all the phase of the moon. -
The correct purchasing group is not being determined in the SC line item
Dear all,
I have a problem in that for some reason, when a shopping text line item is added to the shopping cart, the wrong purchasing group is determined. Further more when you look in the basic data section they is a drop down against the purchasing group field listing all pruchasing groups setup in the org plan via PPOMA_BBP.
This means that the requisitioner can change the purchasing group to any one even the one that is not relevant to his or her Purchasing Organisation. This of cause is not right because if the requisitioner is allowed to change the P/Grp, the wrong buyer may end up recieving the buyer completion work item.
What is causing this?
We have uniquely assigned P/Orgs to P/Grps and assigned resposiibility of P/GRPS to one unique ORg unit (company).
for example, a suppose product Category 1234567 is assigned to P/GRP 100 & P/GRP 100 is assigned to P/ORG 1000 and the P/GRP responsibility is set to Org unit(company) 1000, The requisition "sits" under an orgunit linked to company 1000.
If a requisitioner creates a text item and assigns product category 1234567, when the item is added to the shopping cart , I expect to see that the followig:
1. The Company code(CC)should be 1000 (This is happening)
2. The P/org should be 1000(This is happending)
3. The Plant sssignment is correct
4. The p/grp is worong. It appear that the first P/Grp is assigned plus a drop down listing all p/grps created for all purchasing P/Orgs.
Regards,
GraceYann,
Yes , we have (need to have)set 2 purchasing groups with the responsibility of the same product category. We have to do this because in our organisation, individual company purchasing organisations have same responsibilities to purchase similar products.
Please note that we have a classic scenario implementation. SRM 4, Server 5.
The business requirement and settings in the org plan is for example:
P/Grp 100 has the reponsibility to procure Prod cats LAM001 to LAM010 via its assigned P/org 1000 which is linked to own company 1000 and P/grp 200 also has the reponsibility to procure Prod cats LAM001 to LAM010 via its assigned P/org 2000 which is linked to own company 2000.
Please note that thr buyer responsible for p/grp 100 & 200 are the same and will be the same for similar product cats across the organisation as a whole. Its just the SRM does not allow you in the orgplan to assign the same p/grp to multiple p/orgs, we had to double up on the p/grps.
Also when a requisitioner who sits under company 2000 chooses a product cat 12345 if creating a SC text line, we DO NOT WANT the requisitioner to change the assigned p/grp.We want it defaulted to 200 (based on the org plan setting I have described above) and fixed(greyedout)
when thr line item viewed in the basic data section.
Do you think that because we have set the prod cat range LAM001 to LAM010, which is an alphanumeric product cat range, that could also be the reason for the dropdown listing all orplan p/grps even ones that do not have the product cat LAM001 to LAM010 in its responsubility assignments?
If you are saying that the system does not know which p/grp to pick, why its it displaying all "unrelated" p/rps in the dropdown. I atlest expect to see two p/grps in the dropdown 100 & 200, because only these two p/grps have been set with product cat responsibility for LAM001 to LAM010 in our org plan.
Also if you are saying that is the way SRM was designed to work (which may be the case!!!) how then can we set the org plan to meet our the purchasing org/purchasing grp /prod cat responsibility requirements I have described above?
Regards,
Grace -
My phone is not ringing for a message and a call
Not able to here a tone for a message and a call. names just appear on the banner even my phone is in handy.
Hello all...
I'm on iPhone 4 with iOS 5.0.1 on Australian Vodafone Pre-paid network.
Have a similar issue where I would call my iPhone from a landline, ring tone suggest that phone is ringing, but the actual iPhone device itself is not ringing.
Thought it was the network, so I got myself a new sim - same problem.
Use other (working in other iPhone) sim on the problem iPhone - same problem.
Tried calling out from the problem iPhone - same problem.
The only fix for me was to reset the iPhone by going to: Settings - General - Reset - Reset All Settings.
Hope that helps others...
The question is - what was the root cause of the problem? Hmmmm... -
How to show logged-in Line Group Members in a Hunt Pilot (CUCM V7.1.3)
I have configured a Hunt Pilot with a Hunt List which points to a Line Group with some DNs as Line Group Members. Additionally i gave the affected Users the option to log-in or log-out from the Hunt Pilot by configuring the "Hunt Group Logout" Button in the corresponding Phone Button Template.
Is there a way to find out who is logged-in or logged-out from the Hunt Pilot?Hi Bill,
thanks for your very interesting hint .
I run the query you posted and actually got the following output. But the displayed linegroups are only a subset from my configured 79 linegroups . Is there a possibility to display all linegroups with all corresponding DNs and can i display this information for only one linegroup?
When i know the queery that satisfy my claims, i will write a small web application that uses the AXL-SOAP API.
Regards, Robert
admin:run sql select lg.name as LineGroup,n.dnorpattern,dhd.hlog from linegroup as lg inner join linegroupnumplanmap as lgmap on lgmap.fklinegroup=lg.pkid inner join numplan as n on lgmap.fknumplan = n.pkid inner join devicenumplanmap as dmap on dmap.fknumplan = n.pkid inner join device as d on dmap.fkdevice=d.pkid inner join devicehlogdynamic as dhd on dhd.fkdevice=d.pkid order by lg.name
linegroup dnorpattern hlog
============================== =============== ====
LG_A-Ulr4_Augsburg_9965077_235 \+498215075234 f
LG_A-Ulr4_Augsburg_9965077_235 \+498215075209 f
LG_A-Ulr4_Augsburg_9965077_235 \+498215075224 f
LG_A-Ulr4_Augsburg_9965077_235 \+498215075226 f
LG_A-Ulr4_Augsburg_9965077_235 \+498215075227 f
LG_A-Ulr4_Augsburg_9965079_300 \+498215075327 f
LG_A-Ulr4_Augsburg_9965079_300 \+498215075306 f
LG_AB-Fried17_9965006 \+496021391713 f
LG_AB-Fried17_9965006 \+496021391714 f
LG_AB-Fried17_9965006 \+496021391721 f
LG_AB-Fried17_9965006 \+496021391727 f
LG_AM-Mar9_9965004 \+499621474921 f
LG_BT-Sch9_9965010 \+4992189423 f
LG_DD-Fet29_9965014 \+493514459055 t
LG_HO-Bah1_9965020 \+4992818194122 f
LG_KE-Moz31_9965024 \+498315215110 f
LG_LA-Dre11_9965025 \+498714308419 f
LG_LA-Dre12_9965026 \+498719239113 f
LG_Mue-Sta41_9965029 \+498631386227 f
LG_N-KOEN11_9965034 \+4991124039112 f
LG_N-KOEN11_9965034 \+4991124039142 f
LG_N-KOEN11_9965034 \+4991124039110 f
LG_N-Ste6_9965057_400 \+499112428403 f
LG_N-Ste6_9965058_450 \+499112428455 f
LG_NES-Sie2_9965008 \+499771610413 f
LG_NES-Sie2_9965008 \+499771610421 f
LG_NM-Bah12_9965030 \+499181293312 f
LG_PA-Kle13_9965035 \+498519594109 f
LG_PA-Kle13_9965035 \+498519594113 f
LG_PAN-Drb12_9965036 \+498561961225 t
LG_PAN-Drb12_9965036 \+498561961224 f
LG_R-Her2_9965068_400 \+499413783414 f
LG_TS-Bah26_9965040 \+498619887312 f
LG_Voicemail 997005 t
LG_Voicemail 997006 t
LG_Voicemail 997007 t
LG_Voicemail 997008 t
LG_Voicemail 997009 t
LG_Voicemail 997010 t
LG_Voicemail 997011 t
LG_Voicemail 997012 t
LG_Voicemail 997013 t
LG_Voicemail 997014 t
LG_Voicemail 997015 t
LG_Voicemail 997016 t
LG_Voicemail 997017 t
LG_Voicemail 997018 t
LG_Voicemail 997019 t
LG_Voicemail 997020 t
LG_Voicemail 997021 t
LG_Voicemail 997022 t
LG_Voicemail 997023 t
LG_Voicemail 997024 t
LG_Voicemail 997025 t
LG_Voicemail 997026 t
LG_Voicemail 997027 t
LG_Voicemail 997028 t
LG_WEN-Buer16_9965041 \+499614820413 t
LG_WEN-Buer16_9965041 \+499614820415 f
LG_WM-Puet35_9965042 \+49881922927 f
admin: -
how the heck do i get more ring tones on my phone i purchase them and they go into my music but not ring tones any one no how i can put more on my ringtones plz n ty
Make sure your own music files are saved in the proper folder (Digital sounds) whether in your memory card or the phone memory, the location should still be:
Sound Clips > Digital Sounds.
If your songs/mp3s are saved anywhere else, it will not show up as a selectable ringing tone.
You can move your songs through File Manager on your phone if they are in the wrong location (Options > Move to folder).
Hope that clarifies it for you.
"Try not. Do or do not, there is no try."
If you found someone's comments helpful or like what that person has to say, please give some Kudos to the post! -
Agent Phone is not ringing (outbound)
Hi,
I am using ICM 7.5.7. I have configured agent based campaign for outbound dialing. When dialer place any call to agent desktop agent can accept it and the call is also going to the customer. Both of they are able to talk each other.
Here the issue is when the call lands on agent desktop the IP phone is not ringing. Can any one help me on this.
Regards,
AshfaqueSwitch the dialing mode to preview direct. This is by far the superior method for preview.
When you use preview direct, the call is placed from the agent's phone to the customer directly once they press "Accept". This has many advantages, but the main one is that the agent hears all the progress tones at the other end. There is absolutely no point in making the dialer call the customer from a dialer port (VIP30) and then transferring the other end to the reserved agent. When Cisco came out with preview direct, I changed all my customers over to this method and reaped huge benefits.
Try it - you will understand. This is really a must.
We will come back to your other question in a bit.
Regards,
Geoff -
HT201401 my phone only vibrates and will not ring on incoming calls. How do I fix this?
My phone only vibrates and does not ring on incoming calls. How do I get the audible ring? John
on left side of your phone you have volume controll an right above that is a small button an if you see a orange or red dot you are in silent mode flip the switch up an it will remove silent .
-
My iPhone 5 will not ring when my phone number is called.
Despite the "Silent" button on the side of the iPhone 5 being set to off, and the ringer turned on full blast, my iPhone 5 will not ring when any number calls my phone. This is not an issue with the settings, which are all set for the phone to ring. Has anyone else run into this problem, or may have a solution besides taking the phone in for repair? My phone is no longer covered under the one year limited manufacturer's warranty, so any repair is likely going to cost a minimum of almost $300.
Thanks in advance for the help!MJT's iMac wrote:
... This is not an issue with the settings,...
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New... -
Phone does not ring.. intermittent..
I have had this issue since switching to Verizon. Some calls go through, some do not.
The calls that do not go through seem to happen repeatedly, but not always, from certain callers/phone #s. But I get other calls that do not ring or show a missed call as well.
Cable company came out and called to let me know. Since my phone didn't ring on my end, and they didn't leave a message, they left! I've been without internet for a week due to "missing" their call..
I tried calling my cell from my work desk phone, the cell did not ring. I tried *73, and powered off the cell, removed the sim card, put it back in after a minute, started phone back up. I was able to call my cell successfully twice from my office phone after. Then waited 30 minutes or so, tried again and the call wouldn't go through.
My signal is decent, at least 3 bars, 4g. This issue happens in various places, out and about, at home, etc
I have a galaxy s4.
From reading through various threads, this seems to be a common issue for verizon, is there a resolution yet? This is getting old and I am missing important calls and appointments due to calls not going through.Pineapple123,
Thanks for contacting us here. We're happy to take a look at your issue. It definitely sounds like it could be a little frustrating and we want to make sure it no longer affects your work or personal life negatively. This is not a common issue and we'll need to take it case by case. What zip code does this occur in? When did it start occuring? Were there any changes made to the device around that time? Please fill us in with the details so we can take a closer look. Thanks!
TrevorC_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
Where do i get my password for logic pro x?
i bought logic pro x today and am trying to install it but its asking for my password. where can i find this password?
-
Value not displaying in report whereas it returns in plsql developer
HI
-
I have tried to play you tube tonight on my new imac (it played fine last night) and adobe is asking for a flashplayer upgrade, do I go ahead with this and if yes how do I go about it?
-
Can't import ringtone from Garage band 6.0.5 to iTunes 11.0.4
On my Mac I can't import ringtone from Garage band 6.0.5 to iTunes 11.0.4. I can create the ringtone but when I share it vanishes instead of going into the Tones like it used to do.
-
Zen Extra not turning on on batt
My Zen Xtra 30gb is not turning on with battery. It is working fine if I plug in the power cable. Any body has any clue on this? Pls help.