CUCM restore to new installation

Hi,
We have CUCM 10.5 cluster
I need to ask if there is a disaster and we need to use the backup
So I'll re-install and restore this backup
Only do I need to care for anything for license to be ok ? as you know we got the license from the generated file from PLM. So could this file be changed after the new installation. or the restore process won't check for this point ?
Thanks
Haitham

Hi Ali,
I was just checking the administration guide of PCD which says
Important Notes on DRS Backup and Restore
When restoring your Cisco Prime Collaboration Deployment data, ensure that the Cisco Prime Collaboration
Deployment software version that is installed on your server matches the version of the backup file that
you want to restore.
Note
When you perform a DRS restore to migrate data to a new server, you must assign the new server the
identical IP address and hostname that the old server used. Additionally, if DNS was configured when the
backup was taken, then the same DNS configuration must be present prior to performing a restore.
Note
Cisco recommends that you perform a fresh installation of Cisco Prime Collaboration Deployment on
your VM prior to restoring the data.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/pcdadmin/10_5_1/CUCM_BK_U35347D2_00_pcd-administration-guide-1051/CUCM_BK_U35347D2_00_ucmap-administration-guide-1051_chapter_0101.html#CUCM_TP_I04F3324_00
I do not think u need licenses again.
regds,
aman

Similar Messages

Why cant I restore a new installation of iTunes from an iCloud backup to my iPad

I recently had a virus and had to reinstall a new copy of Windows, in doing this I also had to reinstall iTunes, I always thought the idea of iCloud was that if you ended up with the situation that I was in then you could restore your equipment to the state of the last backup that you did, I have looked everywhere for a link that would allow me to obtain my last backup and there isn't one available this obviously tells me that the Apple iCloud qppearsto be a total waste of time and effort, I have also just downloaded and installed a fresh copy of iCloud manager logged in with my original iTunes ID and clicked on Sync nothing absolutely nothing came back from iCloud so perhaps someone out there can either tell me if I am doing something wrong, or is iCloud the waste of time I think it is.
Regards
Clive
Using iPad with iOS 6.2

So why were the files moved this way?
Simply copy the ENTIRE iTunes folder from the old computer to the new computer. Then launch iTunes and everything will be there.

Updated as new installation 613 to 616 iphone 3GS, the 613 backup is nolonger listed, and all data gone. Anyway to restore 613 with data and update keeping data?

I chose new installation instead of update from 613 to 616. The new installation is missing all the data, and app data, notes, etc. The previous backup is nolonger listed, only new one for 616, anyway to restore 613 with data?

A backup was listed for earlier today, I did a backup before new installation. Once new installation, it did an auto backup of new installation, and only this one is listed.
This matches documentation, it says cannot restore to earlier version from itunes. Do I have to do a restore factory settings to see previous version backup, and restore this earlier version?

Problem to restore itunes data (win7 itunes) after new installation

I made due to performance issues a completely new installation of Win 7 and itunes on my computer (formatting harddisk, new Win7 and itunes installation as well other applications.
I installed new itunes and wanted to import my old data (Files preference list, music, mobil applikation) I saved before on a externad harddisk.
After itunes was installed, I copied the files described into the folderC:\Users\Fred\Music\iTunes\iTunes Media
After starting itunes, I cant see my created playlists, and just some but not all music is available and non of the apps.
Any idea?

The best way is to use the backup copy of your data that you keep on a second drive somewhere.
The application you can download from Apple.
Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list (e.g., ringtones), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.

Should I "restore" a new macbook pro retina from a time machine backup of old mackbook pro?

I'm considering buying a new Macbook Pro Retina. 15".
Now I'm using a 2007 2.4 GHz Core 2 Duo MBP 15" running Lion. It works fine most of the time. Occasionally an application will freeze and I need to force quit.
It seems like the most convenient option would be to restore the new machine from the last Time Machine backup of the old. The benefit is that I'd feel confident that all of my stuff is on the new machine. The downside is that maybe glitches that had developed in the current system over the ~5 years would be transferred over to the new machine.
Or I could make a fresh start with the new machine and invest the time needed to transfer over the iPhoto, iTunes libraries and Documents folder and reinstall all the third party applications. I have an external optical drive to use the installation disks where necessary. The benefit would seem to be that any glitches that had developed in the old system might be avoided. The downside is that this would take a very long time.
What's the recommened method of migrating from an old machine to a new one?

Instead of a restore from Time Machine, I would suggest that you use Setup Assitant that comes up the first time you start the new Mac.
Connect the TM drive to the new Mac before you power it up
Then when the new Mac asks if you wish to recover from an older Mac say yes
Then select from Time Machine
This will keep everything in the system for the new hardware and bring over everything else.
Allan

Oracle 10.2.0.3 Databases - Restore to New Server

We will soon be replacing an old server with a new server and I need to restore all Oracle 10.2.0.3 databases to the new server
and ensure Oracle functionality/connectivity with all databases.
I am in the process of testing and need advice and hopefully a 'Step by Step' process I can follow.
I am a systems admin - not an Oracle db admin - so please explain details of any commands I may have to run.
I have already tested once:
ran command prompt: sqplus / as sysdba
SQL>shutdown immediate;
Stopped all Oracle services:
Oracle Database
Oracle Listener
Oracle DBConsole
Installed Oracle 10.2.0.3 on new server
Ensured that the SID and all other Oracle services information matched the old server during installation on the new server.
Stopped all Oracle services on the new server (used the steps above).
Backed-up and test restored to new server.
Enterprise Manager shows: Listener Up Database Instance Down Agent Down
Any help would be appreciated

It would be good to know your operation system. I hope both new and old match or similar.
You can use RMAN to dumplicate you DB so you can follow [Creating a Duplicate Database on a New Host. Doc ID: 388431.1|https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=388431.1]
but a simple file system copy based manual duplication is also possible if new and old OS system is similar...

HT201250 I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was?

I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was? I want to make sure I will still have various important files on my new computer, like my songs in iTunes, my photos in iPhoto, etc, etc. Thanks so much in advance!

Welcome to the Apple Support Communities
When you turn on the new iMac for the first time, Setup Assistant will ask you to restore a backup, so connect the external disk and follow steps to restore all your files to your new iMac. Your new Mac will have the same settings and programs as your old computer.
In other cases, I would recommend to restore the whole backup without using Migration Assistant or Setup Assistant, but a Late 2012 iMac uses a special OS X build, so the OS X version that you're using on your old Mac won't work on the new one. For more information, see > http://pondini.org/OSX/Home.html

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
tt2

HT1766 I am trying to restore a new replacement phone from an icloud backup but it is telling me there is a problem with backup data. The backup was done under 7.1 and I think the new phone still just has 7.04. My itunes backup was lost last week...sugges

I am trying to restore from icloud but it appears the 7.1 it was backed up in and the 7.04 on the new phone won't allow it. My itunes library was lost last week due to computer crashing and having to be restored. I have a clean very current icloud back up done on March 21st but I cant seem to get it there. Suggestions please?

You will have to update the iPhone to iOS 7.1 if that is the iOS the backup was done in. You cannot restore a newer iOS update to a phone with older iOS. Once you update the phone, you will be able to restore the backup.

When I clicked on Firefox, the update bar started but when it stopped Firfox would not open. The blue screen of death popped up and said something about a new installation. We restarted the computer and now Firefox will not open. Help!

When I clicked to open Firefox the update bar appeared and an update loaded. Usually when this happens Firefox will open up when the update is finished. This time it did not open. when I clicked on the icon again the blue screen opened and said something about a new installation and if this was the first time you have seen this screen restart your computer and try again. I restarted the computer and when I clicked on the Firefox icon the "hour glass" would appear like it was trying to open but it never would open. I don't know what else to do.

See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

If I restored my new iPhone from iCloud backup, and I delete the old iPhone backup to make room on iCloud to back up my new phone, will it delete everything on the new phone?

If I restored my new iPhone from iCloud backup, and I delete the old iPhone backup to make room on iCloud to back up my new phone, will it delete everything on the new phone?

I have this exact same issue. Replaced my iPhone 4s with the new iPhone 5s, setting up my new iPhone 5s to restore from iCloud. This completed and now I am unable to delete my old iPhone 4s iCloud backup (consuming 15.1 GB of my 20GB allocation). How can I delete it, so that I get my 15 GB back? I am not going to invest in additional iCloud storage, because I will be 15 GB down from the off.

HT1766 If I restore my new iphone from my last backup will it delete all of the new things that i have on my phone

If i restore my new iphone from my last backup will it delete all of the new content that I currently have on my phone? would it be better off to set it up as a new iphone? and if i set it up as a new iphone what will that do?

If you restore from your last backup, it will replace what you now have on your phone. If you set it up as new, you will have a phone just out of the box without any of your data on it. You can download any apps again. You can sync your music through iTunes.

Network card not found after new installation [SOLVED]

I broke my filesystem on my Asus UL80V series laptop in trying to solve problems related to the latest glibc update, so decided to do a clean re-install. I had an installation disk at hand: 2009.08 with kernel 2.6.30.4-1 (which is supposed to have the module for my ath9k network device). However after a successful installation (including all the files from base-dev), my network device is not recognised:
dhcpcd: eth0: interface not found or invalid
although network connectivity (wired and wireless) worked perfectly before the installation attempt.
This happened yesterday (17th) and I have been scouring the web since trying to find out what the cause of this problem is, without luck.
I also burned a new installation CD with the latest stable version, but no luck there, either! Got a message at the beginning informing me that the install requires 64 Mb memory, although my laptop has 4 Gb.
I should say, the device is there and working:
lspci | grep Net
gives
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
I also did
modprobe ath9k
just to make sure. No luck.
Any help will be appreciated.
thanks
thea
Last edited by thea (2012-07-23 23:59:16)

Argh, ip may not be around in the 2009 image really ;-) .. Use "ifconfig" instead..
But: I meanwhile cross-checked your ath9k: http://wireless.kernel.org/en/users/Dri … h9k_driver
and it does not sound encouraging for the kernel you have there.
The image is far too old anyway, if you ask me (would be a darn hazzle to get that uptodate I am sure). Pity you get that memory error with the 2011 one. Maybe check forums on that. Sounds very strange, I am not aware of any post I read.
If you can burn another CD, you can try the recent ISOs as well: http://releng.archlinux.org/isos/
Beware that the ones from July dont have the AIF setup anymore.

How can i restore my new macbook pro. Lion is installed from the beginning, but I have no cd. What am I suposed to do?

How can i restore my new macbook pro. Lion is installed from the beginning, but I have no cd. What am I suposed to do?

Boot your computer while pressing Command-R. You can reinstall Lion from here. Covered here:
http://support.apple.com/kb/HT4718

How can I restore my new Macbook pro to Factory setting?

How can I restore my new Macbook pro to Factory setting?

Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: Be sure you have an active internet connection.

CUCM restore to new installation

Similar Messages

Maybe you are looking for