CUCM security password recover on a UCS c220

Hello i'm trying to recover my security password on my cucm v10
but there a step saying that i have to insert a CD ,
i have a C220 where the hell i will insert this CD so i can recover it???? its confusing there is no disk drive on C220!!!!
Thanks & Best Regrads,

Yes you will need to reboot the CUCM cluster(if you have more than one servers) after changing the security password.
Version 10 specific ref:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/cucos/10_0_1/CUCM_BK_C2F2626C_00_cucm-os-admin-guide-100/CUCM_BK_C2F2626C_00_cucm-os-admin-guide-100_chapter_010.html#CUCM_TK_R280FDB4_00
n
You must reset each node in a cluster after you change its security password. Failure to reboot the nodes causes system service problems and problems with the Cisco Unified Communications Manager Administration windows on the subscriber nodes.
-Terry

Similar Messages

UCS C220 with raid v6 problem(not support any CUCM versions)

pease help me in the below problem
after installing UCS C220 with raid 6, i tried to make new v-machine for CUCM but it gives me the below message:
The hardware you are using is not supported for this product. installation will now halt.

Are you using the CUCM OVA?
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Reset UCS C220 Root Password

Is there a way to reset the root password on a UCS C220 VMware ESXi Hypervisor? The instructions I found online apply to a C200 and they dont appear to work for this.
For those wondering we acquired the hardware through an acquisition and our server team had no use for it so I am going to try to create a lab for our group.
Thanks

Alex,
If what you want to do is to change the password of CIMC, then you need to restart the server, press F8 when you see the Cisco logo and then configure a new password (reason why you need to keep your servers away from ppl that can reboot your server and have access to it).
If by any chance you are looking to have the ESXi password changed, then you need to re-install the OS:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1317898
"Reinstalling the ESXi host is the only supported way to reset a password on ESXi. Any other method may lead to a host failure or an unsupported configuration due to the complex nature of the ESXi architecture. ESXi does not have a service console and as such traditional Linux methods of resetting a password, such as single-user mode do not apply. "
HTH,
-Kenny

Reset Security Password Call Manager 7.x

Hello,
I need insert a Subscriber Call Manager in a node with a Publisher, but I don´t know the Security Password in the node Publisher.
How can I reset or recover this password?
Tks
Manoel Dias

Resetting Administrator and Security Passwords
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/7_1_2/cucos/iptpch2.html#wp1044244
EDIT: Brandon you beat me while i was looking for the link. =)
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Problem with the new server UCS C220 for set IP to CIMC

Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regards

You may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help

Linux + KVM on UCS C220

Hello!
     I am trying to use a UCS C220 M3L that we just purchased as a host for Virtual Machines. Here are the hardware specs of the server:
UCSC-C220-M3L
UCS C220 M3 LFF w/o CPU mem   HDD PCIe PSU   w/ rail kit
UCSC-PSU-650W
650W power supply for C-series   rack servers
UCS-CPU-E5-2665
2.40 GHz E5-2665/115W 8C/20MB   Cache/DDR3 1600MHz
UCS-MR-1X162RY-A
16GB DDR3-1600-MHz   RDIMM/PC3-12800/dual rank/1.35v
UCS-HDD500GI1F211
500GB SATA 7.2K RPM 3.5 inch   HDD/hot plug/drive sled mounted
CAB-9K12A-NA
Power Cord 125VAC 13A NEMA 5-15   Plug North America
UCSC-PCIE-CSC-02
Cisco VIC 1225 Dual Port 10Gb   SFP+ CNA
UCSC-BBLKD-L
3.5-inch HDD Blanking Panel
UCSC-HS-C220M3
Heat Sink for UCS C220 M3 Rack   Server
UCSC-PCIF-01H
Half height PCIe filler for UCS
UCSC-RAIL1
Rail Kit for C220 C22 C24 rack   servers
SFP-10G-SR=
10GBASE-SR SFP Module
I had orignally thought of using Ubuntu 12.0.4 LTS as the OS and KVM for virtualization. As I read through the supplied docs and attempt to do just that I have some concerns. First is the Embedded RAID controller. According the quick start guide:
"VMware ESX/ESXi or any other virtualized environments are not supported for use with the embedded MegaRAID controller. Hypervisors such as Hyper-V, Xen, or KVM are also not supported for use with the embedded MegaRAID controller. "
I went into BIOS and checked the settings for the Embedded RAID controller and saw that there were two options: MegaRAID and Intel RSTe. I could not find any thing in the documentation about the difference between these two settings and what would happen if I selected one over the other. I tried both controllers with the two installed drives as a RAID 1 pair and as non-RAID disks with the same results.
The second issue I ran into was that the Ubuntu installer did not recognize either of these two controllers and failed to install. Based on the published documentation, I saw that RHEL 6.4 was supported, so I downloaded and installed CENTOS 6.4 . The installer did detect the Intel RSTe controller as a "Firmware RAID" and installed what I believe is OS level RAID configuration. I say that because when I check the Intel RSTe bios, is still shows two non-raid disks.
So with this background, I am re-grouping to see what is the best way to proceed and have the following questions:
1) Will I be able to run a virtualized environment at all with my current hardware config?
2) What is the difference between the embedded RAID options: MegaRAID and Intel RSTe?
3) Can I just ran both my drives as bare drives without any RAID? Will that deal with the virtualization issue of not being supported with the embedded MegaRAID controller?
4) Do I have to order hardware RAID controller?
5) I have read about the Flexi-Flash disks having the ability to slip-stream Linux drivers during the install but no procedures on how to do that. Where can I find them?
6) Has anyone had any luck installing Ubuntu with this hardware configuration? Is it supported? Or should I just press on with CENTOS?
7) Related to CENTOS, I installed the basic server option and added GNOME desktop with X-Windows to get some GUI Admin tools. When I trying using startx to initiate a session, it appears that the X-Windows server attempts to start, the screen goes black into Graphical mode and drops back to the CLI with a message that server terminated successfully. Anyone know what is going on here?
Sorry for the long message and I appreciate any help that you can provide!
Thanks!
Dave

Hello David,
If you're going to load ESXi on these servers, there are a few things you need to consider when ordering them. For instance, you cannot boot from ESXi using a software RAID controller. So, even if you have some local/internal hard drives and even if you can install the ESXi OS on those hard drives, you will not be able to boot from them if you have the software RAID controller. "VMware ESX/ESXi or any other virtualized environments are not supported for use with the embedded MegaRAID controller. Hypervisors such as Hyper-V, Xen, or KVM are also not supported for use with the embedded MegaRAID controller" (source: Cisco USC C220 Server Installation and Service Guide). If you're going to use a SAN and you don't even need the internal hard drives, I recommend using what Cisco calls the Flexible Flash Card. This card is basically an SD card that comes pre-configured with four virtual drives. The first drive is the Cisco UCS Server Configuration Utility, the second is the HV or Hypervisor, the third contains the Cisco Drivers, and the fourth is the Cisco Host Upgrade Utility. The HV drive is where you can install your ESXi server and can be made bootable from within the CIMC. This is much easier than worrying about which kind of RAID controller to get, and I believe it is a little less expensive than getting local drives with a hardware RAID controller.
Here is a high level overview of the steps to follow from racking to booting ESXi.
To configure the CIMC:
Install the Flexible Flash Card in the server.
Rack the UCS server and plug a network cable into the management port.
Power it on.
Press F8 to configure the CIMC information (IP address, password, etc.).
From a computer on the same network, open a browser and connect to the CIMC using the IP address assigned in step 3.
Go to Servers | Inventor | Storage to see the Flex Flash Storage Adapters.
Click Configure Operational Profile and then put a check next to the virtual drives you'd like to enable (i.e., the HV drive).
To install ESXi:
Click Launch The KVM from the CIMC.
In the KVM window, click Virtual Media.
Click Add and browse to where you've downloaded your Cisco Custom ESXi .iso file and then put a checkmark next to it so it's mapped as the Virtual CD/DVD.
Click back to the Monitor tab and then click Macros. Select the Ctrl-Alt-Del macro to reboot the server.
Press F6 as the server is rebooting to change the boot device to the Virtual CD/DVD.
Install ESXi as you normally would, but make sure to install it to the HV drive (not to the local drives).
When the install is complete, unmap the Virtual CD/DVD and reboot the server using the macro again.
Press F6 to change the boot device to the HV drive, and it should now boot to the familiar yellow and gray ESXi screen.
Regards,
Shahzad

VMware ESXi on UCS C220 M3

Hello,
I have two UCS C220 M3 servers that host CUCM, UCCX etc.
The servers were built with the standard VMware 5.1 U2 ISO (VMware-VMvisor-Installer-5.1.0.update02-1483097.x86_64.iso) rather than the Cisco custom ISO (ESXi-5.1.0-1483097-custom-Cisco-5.1.2.2.iso)
VMware ESXi seems to be working ok but I cannot install VMware tools on the virtual machines and guess that this might be because they were built with the standard ISO file.
When I run utils vmtools status on the CUCM VM I get a message stating:
The VMware Tools ISO is not mounted in the CD/DVD drive
Please ensure that you have selected Guest -> Install\Upgrade VMware tools -> Interactive Tools Upgrade by right-clicking on the VM from your VI client
I guess the standard VMware image does not contain the tools ISO - is there any way to get around this short of trashing everything and starting again?
thanks

Hi James,
You still have to make VMware tools available to the guest.
ie. Using the VI Client, right click your CUCM VM, then select Guest -> Install\Upgrade VMware tools -> Interactive Tools Upgrade
Then in the CUCM CLI, enter "utils vmtools upgrade"
[It will reboot your node!]

UCS C220 server power button turns "Amber"

Hi All,
We have a UCS C220 server on which we are running CUCM 9.1 and CUC 9.1 and all of a sudden the server's power button turns amber and everything goes down. We would have to physically turn on the power button and access the VMware and start all the services.
Please advise.
Regards
Bhavna

Hi, I have the same issue, I just install a new clean CUCM 9.1 and CUC 9.1 in UCS C220 with pre-installed esxi 5.1, I leave the clients site the last Friday and today say to me that the servers is down, just turn on the server and everything comes back, in the vmware logs the only error that show is "2014-05-18T15:31:00.802Z [3DAE2B90 error 'SoapAdapter.HTTPService'] HTTP Transaction failed on stream TCP(error:Transport endpoint is not connected) with error N7Vmacore15SystemExceptionE(Connection reset by peer)" but I saw that error in the log before I installed this site the last May 5, anyone have a clue of what I have to look. Of if this error could do a crash or reset in the system.
Thanks in advance.
Cesar

How do I find out my security password so I can reset my iPad??, How do I find out my security password so I can reset my iPad??

I'm trying to completely reset this iPad so I can give it to my mother, however I have forgotten the security password, how do I find it out? Can anyone help?
Thank you

No one has your password.
There is no way to recover it.
If you mean your Apple ID password, you can reset it.
https://iforgot.apple.com/password/verify/appleid

Blackberry data lost or reset after wife tried to guess my security password

Hi,
I was asleep when my wife tried to access my email by trying to guess my security password on my blackberry 8330 series, when I woke up and tried to use my phone, it had been reset to the original default settings and when it asked for my security password but mine is not working. I have no way to enter my phone and it seems my business and personal information on my phone has been deleted. Is there any way to recover my information and to reset the password on my phone?
Message Edited by EJRaven on 05-15-2009 06:41 AM

Hopefully, if you are on a work account, it is a BES and all you important data, messages, contacts etc., are on the BES. Inquire with your BES Admin.
If you have a personal BIS account, it's gone, as it should be, the security on the device is working as intended.
Do you have a recent backup of the device?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to change security password in ipod 5

How to. Change security password in ipod 5

maybe this:
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions
or this
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

PDF Security password in my Photoshop Elements 10?

Where do I get my PDF Security Password? I'm trying to open a file from my computer and a window pops up asking for my security password?

As Mylenium said once a PDF file's been created with a password, it cannot be cracked. You need to check with the creator of the file for its password.
Thanks
Nikhil

TS2446 i am trying to reset my security passwords but it will not let me. I have read alot of articles and i cant seem to find how to reset the passwords, Please Help.

I am trying to reset my security passwords because i have forgotten them. i have read other articles but i still can not seem to figure out how to change these passwords.

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

Bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???

bought a used Mac Mini and can't get past security password Seller refuses to answer emails. is there a keyboard command to take it back to factory settings or do I need to buy a Disc set and OS???

You can bypass the password and wipe the drive and return to the original facory installation if the seller included the orginal install DVDs with the Mac mini. If not you will need a retail version of Mac OS X. To boot from the Install DVD restart the mini, immediately slip in the DVD and press and hold the C key.

T61p - Please wait while Windows configures Client Security Password - Manager

My T61p system is fully updated, however I continue to get "Please with while windows configures Client Security Password - Manager." and then the computer trys to install
css_manager_vista_tpm.exe
over and over again.
What is the problem here and how can I solve?
How can I contact Lenovo-Thinkpad to assist?
The problem has reoccured even after I did a system restore to an earlier date.
It seems to initiate when I first boot up and then open up "Pictures"
Please help.
Thanks

Well, I take everything back. After removing all password entries and re-installing/rebooting, it worked for a while. But now it is doing it all over again. I tried to call techincal support, but they then said I would have to pay for software support and they only support hardware, and to re-install the OS. Great, jeez, I couldn't have tried that myself, and that is so simple and takes no time at all (detecing sarcasm yet?)
I do a lot of work for large corporations that are watching the IBM=>Lenovo takeover very closely to see if they are going to drop Thinkpads altogether and go with another laptop vendor. This type of weak support does not bode well. The person I was on the phone with was rude, hard to understand, and even told me there was no place to escalate the call to.
There is no replacement for customer support. It is sad to see no Lenovo involvement in this forum, and don't make the mistake of thinking this is an isolated problem at this time. It is growing.
Though Thinkpads are great Laptops, Toshiba used to have the market, but their support or should I say lack of it led to their downfall and position of leadership loss.
It will be no different if Lenovo continues to act like a machine churner.

CUCM security password recover on a UCS c220

Similar Messages

Maybe you are looking for