CUCM starting connection with unknown media server.

Hi.
Lets say you have a SIP server. A CUCM is connected to this SIP server via a SIP trunk. A call is established from the external sip server to the CUCM. The calling phone press "on hold " function(the phone registered in the external SIP server). The external SIP server, sends an INVITE to the CUCM asking to initiate an RTP stream with an external media server(so the CUCM phone can receive music on hold). The CUCM has no knowing of this external media server.
It's possible to tell the CUCM to accept this session with the external media server?
I think the external SIP server, who knows about the media server existence, should proxy the connection between the media server and the CUCM(like an CUCM MTP).
SIP server---------------------------------------------------------------CUCM
                                  |
                                  |
                         Media server
Thanks.

The phone on CUCM that is being put on hold will be asked to connect to this "media server" and in theory as long as the phone has ip connectivity to the "media server", this should work fine.

Similar Messages

Fixed Broken iTunes Connection with Firefly Media Server

Hello, Everyone:
I figured out the way to fixed this. The problem is not with your Firefly Media Server the problem is with iTunes.
Leave your Firefly Media Server alone and edit your iTunes. Please follow instruction on the link I provided below to make iTunes work with Firefly Media Server again. Since, I searched the forum and found no solution for this so I would appreciated anyone who repost this please leave the credit to me. Thanks.
http://sysxtreme.com/portal/index.php/archives/8382

I've found a new firefly/mt-daapd rewrite here that is current:
http://github.com/jasonmc/forked-daapd
http://blog.technologeek.org/2010/08/29/338
I am going to see if I can get it compiled and installed on my FreeBSD system tomorrow. If I do, i'll report back if it works with iTunes 10.

Slow connection to flash media server 2 (with HTTP Tunneling)

Hello,
I use a FMS2 for a big project which include Instant
Messenger and
streaming video.
On my development platform. I have no problem. But in the
final
configuration, the connection to Flash Media Server takes a
lot of
time (about 2 or 3 minutes) and i can't find why.
FMS2 was installed on Windows 2003 Server behind a proxy and
a
firewall which only let the hostport 80 oppened.
The server does not run a web server (or anyother
application) which
use this hostport.
The connection are established by HTTP Tunneling.
Does someone already have the same problem?
Thanks for your answers and sorry for my poor english level.
Guillaume

I forgot to mention:
Flash Media server is running fine. I can log into the Admin
application no probs.
I created a folder called "test". Inside that folder I
created another one called streams and inside that folder I created
a folder called _definst_.
I placed an flv file called: test.flv in to the _definst_
folder.
In Dreamweaver CS3 I inserted a Flash Video File:
Chose Streaming as the option and for the RTMP path I put:
rtmp://ipaddressofserver/test/_definst_/test.flv
Called the stream....test.
When i run the page it loads, but the page is blank.
In the Flash Media Server, in the "View Applicationd" tab
I get the record of test and underneath it in the same link
it says test.flv with 1 client
The Streams tab shows a random name and Netstream.
This tells me its recognising the connection and link, but
the movie is not on the page
any help would be appreciated
cheers

How to test streaming bandwidth on localhost with Flash Media Server ?

Hello,
I'm trying to debbug my code on Client side (Action Script 3) that works with Flash Media Server 4 on localhost. Everything seems fine up to that point.
However, when I'm trying to test my player with other remote streaming servers, I notice bugs because of lower bandwith transmission between the server and the player.
Is there a simple way to simulate lower bandwith with FMS4 on localhost (by config, application.xml, programmation...) ?
Thanks
Seb Ethier

Thank you zarihs Rawna
Indeed, i have been with Server-Side ActionScript (SSAS) way. it's more simple, i think.
Well, here the step what i did :
Step 1 :
Make a file "main.asc" et copy & paste the code below.
- more info : http://www.peachpit.com/articles/article.aspx?p=31217
      *main.asc*
    var bandwidth;
    application.allowDebug = true;
    // Application callback functions
    application.onConnect = function(client, user) {
        //12800 = 100 Kbps
        //64000 = 500 Kbps
        //131072 = 1Mbps
        //327680 = 2.5 Mbps
        //983040 = 7.5 Mbps
        //1966080 = 15 Mbps
        //3932160 = 30 Mbps
        //6553600 = 50 Mbps
        //15728640 = 120 Mbps
        bandwidth = 64000;
        client.setBandwidthLimit(bandwidth, bandwidth);
        trace("clientToServer = " + client.getBandwidthLimit(0) + " serverToClient="+ client.getBandwidthLimit(1));
        application.acceptConnection(client);
        trace("TEST");
Step 2 : Save the file under the folder underneath FMS's applications directory
Example : FMS\application\dyn
More info : http://www.flashcomguru.com/articles/fms2_basics.cfm
Step 3: Start the FMS server. If there is a problem, check the log file
Example : FMS\logs\_defaultVHost_\dyn\_definst_\application.00.log
Step 4 : (optional) Change the value of the variable bandwidth for your test. I put in comment some common internet connection speed converted in bytes.
That's all,
regards,
sethier

The MOF Compiler could not connect with the WMI server

I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.

Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

SQL 2012 installation Error-The MOF compiler could not connect with the WMI server

Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.

Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil

MS SQL Server 2008 not getting installed properly - MOF compiler could not connect with the WMI server

I am trying to install SQL Server 2008 in my local machine. However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?

"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?
can you check below two links.Make sure previous failed installation is removed completely.
http://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server#
Solution given by Connect MS is:
Possibly the issue was caused by uninstalling from add-remove programs - at any rate, using aaron bertrand's suggestion below fixed the issue. Also of note - I used the local admin for the install.
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/02/20/the-xp-sp3-msxml6-sp2-sql-server-debacle.aspx
yes - remove msxml6 and any other half installed portion of sql 2008 and REBOOT and install sql
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Archival services with Flash Media Server

I work for a broadcasting company and we do live telecast of
various events, mostly related to professional sports. We currently
have a Windows Media Encoder 9 setup with Windows Media Server,
etc. I have a custom written application that archives all of our
broadcasts. This was accomplished with the M$ media SDKs. Archival
means we record each one of our daily live feeds for review and
archival purposes (game footage for coaches, stuff like that).
We are currently looking at h.264 capable setups, or
something equivalent. We have been playing around with Adobe's
encoders, media server, and all that. We are impressed with the
quality. Switching to this right now has some logistical
complications, mostly related to an operational requirement based
on our current business model. Simply switching to h.264 overnight
isn't going to be possible; we will need to prepare.
So, with that in mind, I have a question relative to SDKs and
Flash. My current application (the archiver) can archive up to 120
events simultaneously on a single, reasonably fast machine on a
fast network. I have to be able to record at least 60 on a given
night, the 120 was discovered during testing and its faltering is
relative to network collisions and getting ethernet up to 40%
utilization more than not having enough CPU to process the streams.
I would need something similar for Adobe. I have the spec (at least
the public domain version) for the tunnelling protocol so reverse
engineering this isn't going to be a big deal. What I'm mosly
interested in is an SDK with functionality that allows me to record
a lot of streams in software for archival purposes. This SDK has to
be smart enough to deal with Disk I/O VERY intelligently because
clearly anything more than 8-12 realtime stream records to a disk
in a linear fashion is going to overload the hard drive.
Before anyone starts spouting off about DRM and piracy, we
are recording the broadcasts we own. This is for archival and this
archival process has to be automated (the app isn't JUST a
recorder, there's a whole process shielded from the operators of
this thing for defining stream locations, where to save the files,
and all that). I realize all this code that automates this process
for our company would still need to be written. What I'm interested
in specifically are readers and writers for flash streams,
especially relative to network reading and disk writing
(intelligent disk writing; I've written custom implementations of
MMS, HTTP, etc that mash the hard drive).
In a nutshell, is there an equivalent SDK for Adobe's
technology as the Windows Media Format SDK is for WMV files? This
is currently the only hurdle in implementing Adobe's h264
technology in lieu of our current setup (which is 100's of encoders
and locations at the current time, all over North America.
Thank you for your time.

Take a look at On2's Flix SDK for Live. That uses the VP6 and
any day now, the h264 codec for FLV.

JMX Connectivity with the Adminstration Server - Weblogic 9.x

When using the java naming provider url in Managed Server startup script, or in server start tab when using node manager, or loading it from properties file (for deployment) we see below JMX Warning message in Managed Server startup log saying JMX connectivity exception with Admin Server. This is BUG in Weblogic 9.x release and there is CR open on this issue.
<May 19, 2009 10:35:25 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.149.181.55:20001
for protocols iiop, t3, ldap, http.>
<May 19, 2009 10:35:25 AM EDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManagedServer1_1
" for domain "wls923_domain1" running in Production Mode>
<May 19, 2009 10:35:25 AM EDT> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster
successfully. Log messages will now be broadcasted to the domain log.>
<May 19, 2009 10:35:25 AM EDT> <Warning> <JMX> <BEA-149509> <Unable to establish JMX Connectivity with the Adminstration
Server AdminServer at service:jmx:t3://AdminServer:20000/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.m
beanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:151)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:326)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnec
tion(RegisterWithDomainRuntimeService.java:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblog
ic.management.mbeanservers'; remaining name 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<May 19, 2009 10:35:26 AM EDT> <Notice> <Cluster> <BEA-000102> <Joining cluster Cluster1 on 239.192.23.2:7001>
- - Tarun

When using the java naming provider url in Managed Server startup script, or in server start tab when using node manager, or loading it from properties file (for deployment) we see below JMX Warning message in Managed Server startup log saying JMX connectivity exception with Admin Server. This is BUG in Weblogic 9.x release and there is CR open on this issue.
<May 19, 2009 10:35:25 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.149.181.55:20001
for protocols iiop, t3, ldap, http.>
<May 19, 2009 10:35:25 AM EDT> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManagedServer1_1
" for domain "wls923_domain1" running in Production Mode>
<May 19, 2009 10:35:25 AM EDT> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster
successfully. Log messages will now be broadcasted to the domain log.>
<May 19, 2009 10:35:25 AM EDT> <Warning> <JMX> <BEA-149509> <Unable to establish JMX Connectivity with the Adminstration
Server AdminServer at service:jmx:t3://AdminServer:20000/jndi/weblogic.management.mbeanservers.domainruntime.
java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic.management.m
beanservers'
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:151)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:326)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at weblogic.management.mbeanservers.runtime.internal.RegisterWithDomainRuntimeService.getDomainMBeanServerConnec
tion(RegisterWithDomainRuntimeService.java:199)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblog
ic.management.mbeanservers'; remaining name 'domainruntime'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:171)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:214)
Truncated. see log file for complete stacktrace
>
<May 19, 2009 10:35:26 AM EDT> <Notice> <Cluster> <BEA-000102> <Joining cluster Cluster1 on 239.192.23.2:7001>
- - Tarun

Live Video streaming with Adobe Media Server

Problem:
I have 10mbit up/down internet connection. I will do video streaming a live meeting to around 350-400 live watchers
So i can't use regular streaming to all watchers. Then each user will have 3kb/sec rate which is a terrible speed.
Solution:
here what I understand about Multicasting.
I have a dedicated server with 1gbit dedicated port.
I will only stream my video to dedicated server and the watchers will be getting data directly from dedicated server which have 1gbit port.
Can I do this with adobe media server?

Hi
You can refer the following documentation around multi point publishing:
http://livedocs.adobe.com/flashmediaserver/3.0/docs/help.html?content=01_overview_basics_3 6.html
http://help.adobe.com/en_US/FlashMediaServer/3.5_Deving/WS5b3ccc516d4fbf351e63e3d11a0773d5 6e-7ffb.html
Let us know if you face any issues.
-Karishma

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

Failed to Establish Connection With SQL Database Server in Essbase studio

I am using Essbase Studio Release 11.1.2.1.00 for developing XOLAP cubes and deploying them on to Essbase server .
I am getting the below Error while deploying the cube onto Essbase server.
error : Failed to deploy Essbase cube.
Caused by: Failed to build Essbase cube dimension: (TimeHierarchy) .
Caused by: Cannot get async process state. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server.
From Essbase Studio -> Datasources tab, I could able to connect to SQL Database server..Please let me know how to resolve this issue.
Thanks,
Swathi

Thanks for the reply.
There was a problem with my Essbase Server..so now i m pointing to other server.
now I am getting the below Error:
Failed to deploy Essbase cube.
Caused by: Cannot end incremental build. Essbase Error(1025008): Join Specification near [[TIMEID]] is invalid. Please verify the Xolap Schema file.
Please let me know how can I validate my cube and what changes might require in my Cube definitions?

Failed to Establish Connection with SQL Database Server (EAS)

Hi,
We have recently installed version 11.1.2.1 of essbase. Everything is working just peachy. One of my users tried to build a load rule using an Oracle ODBC data connection and gets the error:
Failed to Establish Connection with SQL Database Server. See log for more information.
When I look in the log I see this:
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1013091)
Received Command [SQLListDsn] from user [mressler@EnCanaAD]
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1013091)
Received Command [SQLRetrieve] from user [mressler@EnCanaAD]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021004)
Connection String is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021041)
Connection String is [DSN=Test;UID=...;PWD=...;]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021006)
SELECT Statement [SELECT '1' from dual] is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Warning(1080014)
Transaction [ 0x140002( 0x4f4cfd87.0x7b890 ) ] aborted due to status [1021001].
I have tested that the ODBC connection can connect to the database. The sql query has been dumbed down to select '1' from dual. I have not included the word "select" in the query.
Anyone seen this before? We are in the process of uninstalling the Oracle client completely and re-installing it to see if this solves the issue. We only installed the 64 bit version of the Oracle client. I am running on Windows Enterprise 2008 R2 - 64 bit. EAS, Essbase, EIS are all 64 bit installs. I believe Studio is the only one that is 32bit. However we are not currently using this product.
Thanks,
Mike

Hi Mike,
With Oracle Support's help, we got 3 of the 5 servers working now. We were using the Datadirect drivers but were configuring them wrong! You have to use the Standard Connection portion in the setup, specifying the Host, Port Number (1521) and the SID. We were using the TNSNames Connection which worked in the past, but apparently does not now.
So I am down to 2 servers not working. They are both Windows 2008 R2 Enterprise 64 bit, running Oracle EPM Essbase 11.1.2.1. When I Open SQL in EAS it prompts for database (Essbase Server, App, DB) and when I hit ok it pops up with "Network error: Cannot Locate Connect Information For []". We did not do any of the suggestions in the document you linked to get the other 3 servers working. When you hit ok on that error, you then get another error stating, "There are no Data Sources defined. 'SQL data sources' option will be disabled". We do have datasources defined on the server.
Any ideas?
Thanks,
Mike
Edited by: Mike on Mar 1, 2012 8:38 AM

Error: 1021001 Failed to Establish Connection With SQL Database Server

Hello,
Someone you already MEETS it the following error during an essbase retrieve DLR.
My client oracle essbase on my server is 64bit, Essbase 11.1.2.2 x64
I run the odbc located in% windir% \ system32 \ odbcad32.exe
"Error: 1021001 Failed to ESTABLISH Connection With SQL Database Server. See log for more information"
Here is the log:
Received Command [SQLListDsn] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local / CAS_TEST / / / 8168/Info (1042059)
Connected from [10.100.50.2]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1013091)
Received Command [SQLRetrieve] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021004)
Connection String is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021041)
Connection String is [DSN = TEST_ORACLE; UID = ...; PWD = ...]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021006)
SELECT Statement [SELECT from dual;] is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft] [ODBC Driver Manager] Driver's SQLAllocHandle we failed SQL_HANDLE_ENV]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021014)
ODBC Layer Error: Native Error code [0]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Error (1021001)
Failed to ESTABLISH Connection With SQL Database Server. See log for more information
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Warning (1080014)
Transaction [0x780001 (0x50659d19.0xc9e78)] aborted due to status [1021001].
When I try to go through OCI service name:
dbServerName: port / service_name
I have the following error message:
Solutions2: List of members 1423.CAS_TEST.CAS_TEST September 28, 2012 2:50:15 PM CEST Succeeded
Read SQL record September 28, 2012 2:50:35 PM CEST Failed
thank you in advance
Edited by: 851398 on 28 sept. 2012 06:31

In essbase logs there is nothing special, same for windows log.
Everything I like is log in log view eas
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database State]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7580/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6720/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6720/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7304/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7304/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7572/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7572/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8116/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8116/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7384/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6592/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6592/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7972/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7972/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///216/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/216/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3104/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3104/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3472/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3472/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8112/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8112/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3840/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3840/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7760/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7760/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7300/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7300/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7904/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7904/Info(1013091)
Received Command [OtlQuerySmartLists] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3612/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3612/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6732/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6732/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7576/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7576/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7268/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7268/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:27 2012]Local/CAS_TEST///7556/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST///8168/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST/CAS_TEST/admin/8168/Info(1013091)
Received Command [SQLListDsn] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST///7564/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1013091)
Received Command [SQLRetrieve] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021004)
Connection String is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021041)
Connection String is [DSN=TEST_ORACLE;UID=...;PWD=...;]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021006)
SELECT Statement [SELECT * from dual ] is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Warning(1080014)
Transaction [ 0xb50001( 0x5065c7d7.0x31ce0 ) ] aborted due to status [1021001].
Have you an idea about the Merant driver to essbase?
Thank

Essbase Studio - Failed to Establish Connection With SQL Database Server

Hi all,
I am new to Hyperion and am having trouble deploying what seems a simple cube in Essbase Studio.
My environment is Windows 2003, EPM 11.1.1.2, SQL Server 2000.
I have the following two issues which may be related.
1. The EPM System Diagnostic tool says that Hyperion Foundation cannot connect to the SQL database.
Error:
Failed: Connection to database
Error: java.net.UnknownHostException: <server name: <server name>
Recommended Action:
Every other EPM application is able to connect to the database. I have tried re-configuring Foundation Services and checking the config files and nothing looks wrong. I would appreciate advice on how to fix this.
2 In Essbase Studio, I was able to connect to the database where the source data is, build the minischema and create dimensions and measures. But when I run the cube deployment wizard I get the error:
Message: Failed to deploy Essbase cube
Caused By: Failed to build Essbase cube dimension: (Time)
Caused By: Cannot incremental build. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
…ODBC Layer Error: [08001] ==> [[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied.]
I have checked the DSN as well as the connections set up within Studio, and they are all able to connect to the database. I am using the admin user for the Essbase server and have created a different user for the databases where the data resides and the shared services database. I tried using the same user all the way through and this didn’t help.
Can you please advise what else I can check or change to resolve this issue.
Also, can you work in EAS with cubes that are created in Studio? I tried looking at it and I got an error that the rule file couldn’t be accessed because it was created in Studio.
After the above failures, I tried creating a cube in EIS, with mixed success. I have been able to load the members and data without errors. But when I try to view the data in the cube, I am seeing field names for the measures instead of the data itself.
...Definitely more questions than answers at this stage of my learning.
Regards
Michelle

Michelle,
I don't know if you found an answer to you question after so many months but I was hoping I could be helpful.
The issue you are experience happens often when the dimension that you are getting an error on, in this case TIME, is built from a snowflake lineage and there is a bad foreign key reference. This dimension is most like high-up in your outline build process for Essbase Studio and this prevents the build from happening usually early on.
Check your logs also. They are in Hyperion > Products > logs > essbase > essbasestudio.
You can also make your logs more verbose by setting a configuration variable in the essbase studio server.properties file but that should only be used for debugging as it really saps performance.
And, yes, you can of course edit an Essbase Studio deployed cube in EAS. However, any changes you make to the cube in EAS are subject to being wiped-out upon the next Essbase Studio deployment of that Applicaion/Database combo.
If you want to provide more detail, screenshots, etc. I would be glad to help where I can.
Cheers,
Christian
http://www.artofbi.com

CUCM starting connection with unknown media server.

Similar Messages

Maybe you are looking for