CUCM Subscriber Lockout - Not able to log in to the server.

I presently having issues with Subscriber Server - I Can Not login to the server using known good passwords.
Is there a password reset procedure?
Is there a software boot method I can use to reset the password?
I am working with CUCM Version 7.1.5.20000-6 / Cisco MCS 7800 Series Media Convergence Server.
Help.....

Hello Gareth, thank you for your response to my call for help, however I was able to reset the Subscriber Server Admin and Security passwords by using the following Cisco documentation,.
Now the server is still unreachable within my network, can't even ping the Node, however I can ping my Pub Server.
I noticed the physical Network Ethernet connections are plugged into a different VLAN, but I thinking that should not matter beause I using Static IP addressing.
The phones communicate with the SUB Server, because when I unplug its Ethernet connection some phones Error out and or revert to old past cUser Configurations.
I have done all the usual steps - and the services are running - but it is NOT validating to the Network - I even reset the gateway from the CLI Command interface of the SUB Server.
If you have any ideas I will be happy to hear them...
Step 1 Log in to the system with the following username and password:
• Username: pwrecovery
• Password: pwreset
The Welcome to admin password reset window displays.
Step 2 Press any key to continue.
Step 3 If you have a CD or DVD in the disk drive, remove it now.
Step 4 Press any key to continue.
The system tests to ensure that you have removed the CD or DVD from the disk drive.
Step 5 Insert a valid CD or DVD into the disk drive.
The system tests to ensure that you have inserted the disk.
Step 6 After the system verifies that you have inserted the disk, you get prompted to enter a new Administrator
password.
Note The system resets the Administrator username to admin. If you want to set up a different
Administrator username and password, use the CLI command set password. For more
information, see Appendix A, “Command Line Interface.”
Step 7 Reenter the new password.
The system checks the new password for strength. If the password does not contain enough different
characters, you get prompted to enter a new password.
Step 8 After the system verifies the strength of the new password, the password gets reset, and you get prompted
to press any key to exit the password reset utility.

Similar Messages

Please can anyone help me to download some apps for my iphone .. i am simply not able to log in to the itunes store , when i enter my apple id it says that it has not yet been used with the itunes store

please can anyone help me to download some apps for my iphone .. i am simply not able to log in to the itunes store , when i enter my apple id it says that it has not yet been used with the itunes store

Ok, you should generally only get this when you are converting your ID to an iTS account for the first time.
Sign into iTunes with your Apple ID and you should get this.... IRC once you agree or accept it's now an iTS account and you wont get that again.

NSS3000 Not able to log in to the NAS management

Hi,
Somehow I am not able to login as admin on the NAS management interface.
I tried all my possible admin passwords but no one is letting me in. This is odd!
I tried to reset the network settings to default, but then the hostname changed to default and as a result I lost all the filesharing. My files are trapped inside the box.
So what can I do about this without loosing files?
Thanks for any advice!

The backup builds up a file to about 260 GB and then it starts to build up the file again and again. This process is taking many days! Finally it stops when the file is about 30-60 GB. So it seems that there is a problem with the scheduled backup as well.
When I open the backup the ".config" folder is present. Inside the folder there are 4 files:
- exports
- ftp_shares
- smb.conf
- version
I assume this is my original configuration.
If I look at a one year old backup these files are completly the same. No changes.
Today I removed all 4 discs from the box and then I tried a network reset and a box reset. I am still not able to log in to the web admin interface. I am trying to log in with the default username "admin" and the default password "admin". But the browser is not letting me to log in. I have tried to log in via the Internet Explorer, Google Chrome and with the Mozilla Firefox. All with the same results. Internet Explorer let me try to log in only 3 times before it throws me a log in fault message. The two other browsers let me try to log in as many times as I want.
Then I tried to FTP the box with success. The default admin username and password has been reset for the FTP service. This is really strange! But of course no files available.
Is there a jumper inside the box or a procedure that can do a complete reset of the box?
Or is it someone that would like to sell me a used box that is working so I can recover my files?
I tried to call the CISCO small business support phone but they just telling me that this product is end of life and they refuse to help me. I asked them if I can buy a service agreement for this box but CISCO is refusing to offer like this support. I am really dissappointed of the support that CISCO is giving in this case!
Any suggestion or help is very appreciated!

Not able to log on to the system

Hi,
I have just added an systen to central monitoring in SOLMAN, but am not able able to log on to the monitored system on double clicking in rz20.
RFC's are working fine, alerst are being generated, CCMS agent is working, everything else also seems to be fine.
Please suggest.

@Javed : RFCs are working fine. Connection, authorisation test evrything is fine.
@Juan : Find below the sm21 output
Time     Type Nr Clt User   TCode Grp N Text
10:19:10 RD          SAPSYS       Q0 I Operating system call connect failed (error no. 239 )
Operating system call connect failed (error no. 239 )
Details
Recording at local and central time........................ 20.05.2011 10:19:10
Task...... Process User...... Terminal Session TCode Program Cl Problem cl         Package
15209      Gateway SAPSYS                                    K SAP Web AS Problem STSK
Further details for this message type
Module nam Line Error text        Caller.... Reason/cal
nixxi.cp   2835        connect239 NiPConn    connect
Documentation for system log message Q0 I :
The specified operating system call was returned with an error.
For communication calls (receive, send, etc) often the cause of errors
are network problems.
It could also be a configuration problem at operating system level.
(file cannot be opened, no space in the file system etc.).
Additional specifications for error number 239
Name for errno number ECONNREFUSED
Interprocess communication (e.g. TCP/IP) connection refused by partner.
This usually means that the necessary receiver program is not running.
Technical details
File Offset RecFm System log type             Grp N variable message data
3536 428220 m     Error (Function,Module,Row) Q0 I        connect239                     NiPConnconnectnixxi.cp2835
Edited by: Chilbul on Jul 5, 2011 3:59 PM

Not able to log in to the portal "cisco prime service catalog" after installing - installation logs has one error.

Hi,
After installing the prerequisites from the document - CiscoPrimeServiceCatalog_10_0_IntegrationGuide.pdf
and image - CPSC_10.0.0R2_unix.gz , on a red hat machine. and oracle version - oracle-xe-11.2.0-1.0.
But the installation logs has an error, as follows -
"Database exception at line: 9972 in file "/opt/CiscoPrimeServiceCatalog/schema/release-12.0.0/schema/CreateIndexes-ORA.sql"
RDBMS message : ORA-01658: unable to create INITIAL extent for segment in tablespace SYSTEM
ORA-06512: at line 7"
Please suggent a work araound

Hi,
I have tried to log in the application
http://bizapp.casa.com:8000/OA_HTML/AppsLogin
but I have got an HTTP 500 Internal server error.
But the server is working because I have got a response on this address:
http://bizapp.casa.com:8000/
Any ideas what is happening?The URL Should be
http:/bizapp.casa.com:8000/OA_HTML/AppsLocalLogin.jsp
not
AppsLogin or AppsLogin.jsp
Thanks

SSRS 2012 some users are not able to edit reports in the server

Hello All,
I am install reporting services SharePoint native mode but some users are not able to edit reports on server error is "Application cannot be started contact your application vendor" but this users edit reports on their client machine
using report builder 3.0.
Please help me

Hi harshad_mule,
Because Report Builder in the Report Manager is a ClickOnce application, the error message means that one or more of the files listed in the application manifest cannot be found on the server, so the application cannot be started. Based on my research, frequently
this means that the application is somehow corrupted, or that the ClickOnce store is corrupted.
To fix this issue, we can try to refer to the following steps:
If Report Builder is corrupted, we can update the Reporting Services to repair this.
Check that the Report Builder application is existing
Open the Report Server folder. By default, the folder is located in: C:\Program Files\Microsoft SQL Server\MSSQL.<X>\Reporting Services\ReportServer\ReportBuilder
Make sure the file "ReportBuilder.application" is existing in the folder mentioned above.
If it is existing, please use the following URL to access the Report Builder directly:
http://<server>/ReportServer/ReportBuilder/ReportBuilder.application
And this issue can also be caused by browser. Because not all report functionality is supported by all browsers in Reporting Services. So please use IE browser to start Report Builder to try it again.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I'm not able to log in to the forum & it's not sending me an email

I already have an account but can't log in...not sure if this question creates a 2nd account for me. I never received an email for password help.
Thanks.

Since you posted a message here as 'Pareshk' you were evidently able to sign in.
You'll receive a notification when someone replies to your post.

How do I tell what version of Foxfire I have? Why am I not able to log in to the NC Tracks Login?

I have been told by NC Medicaid NC Tracks/Liberty that they only support Firefox 10. This is the program where all transactions and processes are conducted. How do I tell what version I have?
I have also tried to log in to NC Track with Firefox, but I get a screen that states I cant access the site?

Hello,
At the top of the Firefox window, click the '''Help menu''' and select '''About Firefox.''' You will get a window like the one in image below.
For Installing older version of Firefox Go through [https://support.mozilla.org/en-US/kb/install-older-version-of-firefox?esab=a&s=checking+version+of+firefox&r=1&as=s Install an older version of Firefox] .
Please let us know if it solved your problem or not.
Thank You.

Not able to log into Verizon Cloud on Galaxy Note Pro 12.2

Not able to log into Verizon Cloud getting a message that my phone number has changed and that I should factory data reset the device and then restart to setup my cloud account. I have not changed numbers and don't want to factory data reset.
Any Ideas?
Thanks

That is really odd, ThePathfinder. I too would be a bit weary of doing that, but the factory reset isn't as bad as it used to be. Let's try this step first before even considering that route. If you go to Settings > App Manager > All Verizon Cloud > Can you clear the apps cache and data, and possibly uninstall any updates for it? This may be enough to clear past info stored for the app, and may allow you to sign in with no issues.
NicandroN_VZW
Follow us on twitter @VZWSupport

Very URGENT:am not able to log in to my account on installation of OSX lion...tried to resolve this issue by calling apple support centre ,but was left in vain...am not able to access my documents nor do any work...plz help me resolve this issue asap...

am not able to log in to my user account after installation of OSXLion,have called up the support centre many times,but was left in vain ...i belief its a simple problem ,but why is apple support center not able to help me out ...have given them all the required information with respect to everything...somebody plz help me to log in as am not able to access my docs and do any work...

My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
This is entirely a carrier issue. If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
i feel i need to change my brand
This is a user-to-user tech support forum, not Apple. No one here cares at all about your threats.
NEVER post personal info in this public forum

Not able to log-on workspace/shared services after new inst thru index.jsp

Dear Specialist Team,
I m Kalyan, new to HFM product installation. I have completed successful EPM installation with the help of user guides from Oracle.
Installed on my local machine, able to work on Planning / Essbase Admin server, but not able to log-on to workspace and shared services on the local host link.
Checked many things like Services running properly, Diagnostics report. All are positive. Using IIS 7.
I m able to see this link "*http://localhost:9000/workspace*/", when I click on the Launch Application a blank window gets opened on Popup and nothing is visible it says loading for long time on this link "*localhost:9000/workspace/index.jsp*".
Tried using different browsers, but unlucky. Is there anything I m missing with java or browser or something else?
Please help me to sort this, so that I can log-on and proceed with application usage.
Regards,
Kalyan

John's support document related to the browser settings is the best, however if you do not have access to support document or are using Firefox you can try installing an add on found at -->
https://addons.mozilla.org/en-US/firefox/addon/remote-xul-manager/
and restart Firefox...
Once the browser is restarted..you can find the add on at Firefox --> Web Developer --> Remote XUL Manager
Add the URL, that you are using to access workspace and try to load it. If everything is good, you should be able to see workspace/shared service page.
Thanks.
hyperionEPM
Please mark answers as helpful or correct for others to find them easily

I am not able to log into FaceBook on my macbook pro using my Apple ID

I am not able to log into FaceBook on my macbook pro using my Apple ID

Then, what razmee209 says. It's apparently not a phone issue since other people can get in, so I'd call the facebook app developer and let them know what's going on.

Not able to log into (IR,ID,SLD,RWB) j2EE Engine.

Dear Experts,
We have SAP PI 7.0 installed in our landscape. Clients 110 and 100 are created. User ABCD is created in 110 with all (SAP_XI, SAP_SLD, SAP_BC_AI* and SAP_NEW, SAP_ALL) privileges.
I am able to log into 110 with user ABCD. But, I am not able to log into IR, ID, SLD and RWB. I think PI 7.0 by default will be installed on client 001 and later we need to do some settings to make it point to client 110.
Can you please provide me some notes/blogs/links to solve this issue? Thanks in Advance.

Hi PhaniKumar,
Read below sap note.
for SAP NetWeaver 7.0
Note 940309 - Change PI default client after NW 7.0 Installation
For SAP NetWeaver for PI 7.10
Note 1115280 - Running SAP NW for PI in a different client
Regards
Ashok
Edited by: Ashok Dalai on Nov 4, 2008 7:34 AM

HT1349 I own an Ipad 1. Recently, my imessage does not work as i am not able to log in using my Apple ID and password which before this I had been using to log in. How do i resolve this? Tq

Own an Ipad1. Recently, my imessage does not work and i am not able to log in using my existing name and passwrd. However, this existing username and password can be used to login into my itunes etc.
How do I resolve this? Tq

If the problem persists, you'll probably have to make another apple id, it wont take off any games or music or apps or anything you've bought it will all stay there, i have two apple id's and i don't have a problem with anything.

Help..!!!..administrator not able to log in at this time...!!!!!!!!!

hi...all of a sudden when i try with log in with my administrator account the "not able to log in at this time " message pops out...!!!::(((
1) i can log with my secondary user account.
2) i can change setting using my "usual" administrator password...
HOW CAN I LOG AGAIN ON MY MAIN ACCOUNT...!!!!!!
please help...
federico

That link recommends that you delete the troubled account and recreate it, then restore your files from a backup. If you don't have a backup, then your files are lost.
I'll see if I can get some more knowledgeable people here to help, but you may be out of luck.

CUCM Subscriber Lockout - Not able to log in to the server.

Similar Messages

Maybe you are looking for