CUCM Upgradation - DMA Error

Hi all,
Am trying to upgrade from CUCM 4.3(2)SR1B to 7.1.3. For this i downloaded DMA for 7.1.3 and installed on the Publisher server.
After rebooting, i tried to export the data after completing the Pre-Export tasks. But its not getting successful and i again tried after uninstalling and installing the DMA again.
The error shown is,
[01:17:26 AM] Validating exported Cisco CallManager database and directory data.
[01:17:26 AM] [Warning] This can take a long time, depending on the size of the database and directory. Be patient.
[01:17:26 AM] Estimated time to complete data validation is about 59 minutes.
[01:17:26 AM] Accessing database...
[01:20:07 AM] [Error] modExportDatabase=Failure
[01:20:07 AM] [Error] Failed to complete database processing successfully.
[01:20:07 AM] [Error] License file (licupgrade.lic)is not generated as expected due to unsuccessful initialization or DMA validation.
[01:20:07 AM] [Error] Failed to validate Cisco CallManager database and directory exported data.
[01:20:07 AM] [Error] The exported data cannot be used for upgrade.
[01:20:07 AM] [Error] Correct the database and/or directory data and run DMA again.
[01:20:07 AM] [Error] Verification of DB in IDS failed. Retaining the TAR file as it is.
[01:20:07 AM] Building archive F:\DMABackup 04122010\DMAExportFailed12-04-10#1-15.tar.
[01:20:09 AM] [Warning] Archive built successfully.
[01:20:09 AM]
[01:20:09 AM] Appending DMAResult.txt to archive F:\DMABackup 04122010\DMAExportFailed12-04-10#1-15.tar.
If someone have faced the same issue, please help me out. The entire DMA logs are attached along the post.
Regards,
TT

Hi Christos,
Thanks for the reply. Actually i contacted TAC and they are also suggesting the same.
But here am facing a challenge because the customers IPCCX 4.1.1 is running on the same publisher. So we want to confirm if the OS patch update will have some adverse effect on the IPCCX. TAC is not confirming on this, because as per the documentations IPCCX 4.1.1 is not supported on OS patch 2003.1(4a)_SR16, so currently we are in dilemma on how to move ahead. Without this OS update we cant take a good DMA backup and if we are doing this OS update, we dont know how it will affect the IPCCX.
Please advice, also please someone please respond, if you have done 4.x to 7.x migration using BAT to export the configurations.
Waiting for valuable reply.
Regards
TT

Similar Messages

CUCM upgrade from 7.1.5 to 10.5.1.10000-7

Is it possible to do the migration from 7.1.5 to 10.5.1.10000-7 which we are doing for jump upgrade from 7.1.5 to 9.1.2.
The reason why I preferred because this jump upgrade we can achieve in isolated network.
In that case can anybody please help to get specific document for that. Kindly have a look on this case.
Regards,
Abi

You can use prime collaboration deployment. PCD will do your upgrade and migration without doing any jump upgrade or intermediate upgrade..
Please refer to the vide below.
https://www.youtube.com/watch?v=JzG4kz1_hL4
All upgrade documentation are available on cisco. Take some time and look at the CUCM 10.5 upgrade document
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.html

CUCM Upgrade from 8.6(2a) / 8.6.2.20000-2 to 8.6.(2a)SU2 (8.6.2.22900-9)

I'm getting ready to upgrade a client's CUCM cluster from 8.6(2a) / 8.6.2.20000-2 to
8.6.(2a)SU2 (8.6.2.22900-9). They use extension mobilty with UCCX version 8.5.1.11003-32.
Does anyone know of any issues with ugprading this cluster vis a vis their UCCX version ?
The current CUCM Version 8.6(2a) / 8.6.2.20000-2 shows a JTAPI shows the following JTAPI version:
admin:show packages active cm-jtapi-
Active Side Package(s): for cm-jtapi- package(s)
cm-jtapi-plugin-8.6.2.10000-2
From the ReadMe For Cisco Unified Communications Manager Release 8.6(2a)SU2
http://www.cisco.com/web/software/282074295/93949/cucm-readme-862asu2.pdf
I see that it shows:
cm-jtapi-plugin-8.6.2.10000-10.i386.rpm
Once I have performed the CUCM upgrade - do I need to upgrade the JTAPI plugin on the UCCX Platform?
TIA

Mohamed,
I have not actually peformed the upgrade yet. If you have done so - please reply with any lessons learned that you have.
I would upload the file to all the servers in your cluster prior to your upgrade maintenance window. This should not be service impacting.
Then during your upgrade maintenance window -
Step 15 Once the Publisher and the subscribers have been upgraded, a version switch must be completed so the servers reboot to the new upgraded partition as follows;
Web Browse to the Publisher’s OS Administration GUI
To restart the system and activate the upgrade, choose Settings > Version; then, click Switch Version.
The system restarts and should be running the upgraded software. Once the Publisher is accessible, proceed with the subscribers.
Good Luck,
Amir

CUCM upgrade 8.6 to 10.5 7500 user OVA

Hello,
I'm planning a CUCM upgrade from version 8.6 to 10.5 (both virtualized) This was deployed using the 7500 user OVA. In 10.5, the HDD requirement has changed from 2x80 to 1x110. According to the upgrade guide, I can resize my drives using disk expansion COP file. My question is, what should the end result be of my drive changes? Do I change both drives so I end up with 2x110 or do I only change one leaving me with 1x110 and 1x80?
I don't have enough CPU resources to create new VMs and migrate using PCD.
Thanks,
Glenn

Hi Glenn,
My understanding is that the COP file is used to regain used space within the VM in the sense that you do not have enough space to proceed with the upgrade to 10.5. The COP file essentially removes your inactive partition in order to gain that needed space. As long as there is enough free space to complete the upgrade I wouldn't modify the drive structure of the VM in question.
Hope this helps
Tony
Please rate helpful posts

MAIL: The upgrade failed - error occurred during upgrade. launching Mail Import assistant to repair damaged index did not work

After installing Yosemite, the Mail required an upgrade. the upgrade was completed but resulted in a message: The upgrade failed. error occurred during the upgrade, check continue to launch Mail Import Assistant.
This resulted in an instruction: Your mail index has been damaged. To repair it quit mail. Mail will repair index next time you open mail.
Following this instruction resulted in the same failure message being repeated continuously.
How do I proceed to upgrade the Mail app.?

If doing as the alert directs (relaunching Mail) has no effect, see below.
The new version of Mail stores its database in a different format than the old one, so the database has to be converted before Mail can use it. Sometimes the conversion fails because the old database is corrupt. The easy way to recover is to discard the old database and start afresh. You can do that without losing any messages, provided that:
☞ All your incoming mail accounts are on an IMAP or Exchange server
☞ You store sent messages on the server
☞ You don't have any "On My Mac" mailboxes
Most well-known independent mail services such as iCloud and Gmail are based on IMAP. On the other hand, ISP-hosted mail services almost always use POP. If your ISP is one of your mail service providers (or the only one), you probably can't use this procedure. Ask for further instructions in that case.
If you know that the conditions above are satisfied, continue as follows.
Quit Mail if it's running. Back up all data.
Open the Library folder in your home folder by holding down the option key and selecting
Go ▹ Library
from the Finder menu bar. Inside it is a subfolder named "Mail." Move that folder to the Desktop. You're not moving the Mail application; you're moving a folder named "Mail."
Open the Internet Accounts pane in System Preferences and recreate your mail accounts other than iCloud with the same settings as before. To recreate an iCloud mail account, all you have to do is open the iCloud preference pane and check the box marked Mail.
Launch Mail. If all goes well, your mailboxes should be restored automatically. The messages will be downloaded from the servers, so it may take a long time if you have very large mailboxes. Some people have mailboxes in the gigabyte range, and that may be a problem if your bandwidth usage is metered.
If the mailboxes are created successfully, you can delete the folder you moved to the Desktop. You may have to recreate your Mail rules, signatures, and custom stationery. If it's very important to you not to have to do all that, ask for instructions before deleting the folder.

I just upgraded to Yosemite. Iphoto is now broken. Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

I just upgraded to Yosemite. Iphoto is now broken. Upon upgrade receiving error "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."

Perform the following, stopping with the first one which works:
1. Open the Mac App Store's Purchases tab. If you're prompted to accept iPhoto into your Apple ID, do so.
2. Move it out of the Applications folder(it may need to be put into the Trash temporarily), and then see if you can download it for free from its individual product page.
3. Click here and contact Apple.
(116137)

Unable to install photoshop cs4 upgrade. getting error message

unable to install photoshop cs4 upgrade. getting error message

but the error message says that Apple Power PC apps no longer supported.
You still need to contact the manufacturer. You need to determine from them if they have drivers that support the OS that is currently installed on your comp or read the following KB Articles:
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
A scanner driver you may wish to consider: VueScan Scanner Software

UCCX After CUCM Upgrade

Hi All
I am running UCCX 8.5.1.11004-25 and upgrading to CUCM 8.6.2.23900. I have completed several CUCM upgrades with various dependencies but never with UCCX as a dependency. I have checked the compatibility matrix and this all seems fine however i cant find any information on if anything needs to be done to UCCX once i switch versions on CUCM.
Im suspecting that i will need to run a JTAPI re-sync which will download a new JTAPI if it finds a different version ? Is this correct and also is there anything else i need to be watching out for ?
Thanks, Carl Ratcliffe

Thanks Tanner, quick reply and confirmed what i thought, just didnt want to get caught out at 2 in the morning with something i have missed.
Thanks, Carl

For some reason I cannot uptade Modern Combat 4, every time I try upgrading an error message appears saying you cannot uptade since you do not own the major version of this software. I need to uptade to play online, any help would be appreciated.

For some reason I cannot uptade Modern Combat 4, every time I try upgrading an error message appears saying you cannot uptade since you do not own the major version of this software. I need to uptade to play online, any help would be appreciated.

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Hello, When upgrading Iphone4 error-1.How to remove it? thank you

Hello, When upgrading Iphone4 error-1.How to remove it?
thank you

This is a bad Hardware Error, most often means Baseband Problem. Maybe try to Restore Firmware with SIM Card removed. If you still have Warranty or AppleCare Coverage take iPhone to Apple for resolution.

ELM shows insufficient licenses after CUCM upgrade from 9 to 10.0.1

Hi All,
I just finished upgrading cucm 9 to cucm 10.0.1. Upgrade completed successfully, but elm now shows insufficient license message.
This is a Vmware installation BTW, I doubt that it matters the CUCM 901 worked fine with its ELM.
The ELM is coresident with CUCM. I though that upgrading CUCM will upgrade ELM too, but the Dashboard says to upgrade to latest version of ELM.
When I ordered upgrade through UCSS and downloaded all the files that were included in this upgrade order, one of the files was CiscoPrimeLM_64bitLnx_10.0.1.10000-19.sgn.iso.
I tried to use CUCM OS administration with this file to upgrade ELM, but OS Administration doesn't recognize it as a valid file.
The file that I used for CUCM upgrade was: UCSInstall_UCOS_10.0.1.10000-24.sgn.iso
So at this point I'm not sure whether ELM needs to be upgraded or I need new licenses for CUCM version 10.
Thanks
Yury Brodsky
Telecommunications Specialist
AudioCodes
27 Worlds Fair Drive
Somerset, NJ 08873
Direct: 732-652-2162
Fax: 732-469-2298
Email: [email protected]

Upgrading co-res CUCM should have upgraded your ELM as well. It should now show as Prime License Manager when you log in. I'm guessing you just don't have any CUWL 10.x licenses installed. Can you attach a screenshot of the License Usage page in PLM?
You may need to email [email protected] to move your 9.x licensing to 10.x licenses.

CUCM upgrade in UCCE environment

We have a CUCM cluster(v6.1.2) for our UCCE environment (ICM v7.2.5). I need to upgrade the CUCM to version 6.1.3 (due to the DST bug). Can someone tell me which components in UCCE that I will need to upgrade and/or modify for this CUCM upgrade? Or at least point me to a document that outlines this?
thanks,
Brian

You would probably have compatibility without any UCCE change, but the recommended task is to download the updated JTAPI Client plugin from your upgraded CUCM and overwrite what is there on your PGs.
That is all.
Regards,
Geoff

Upgrading systemd Error getting authority

Hmm, upgrading today got me this
pacman -Syu bind
(12/41) upgrading systemd
upgrading systemd Error getting authority: Error initializing authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: Timeout was reached (g-io-error-quark, 24)
does this mean an install broke, or what..

This post seems to be related to your question.
https://bbs.archlinux.org/viewtopic.php?id=153610

CUCM Upgrade 7.1.5 to 10

Hi All,
We are planing to do a 4 server CUCM upgrade (physical to VM) from ver 7.1.5 to ver 10. Below is the plan
- Upgrade the CUCM on current MCS servers to ver 9 (bridge upgrade) and take a DRS backup
- Install CUCM ver 9 on VM and perform the backup restoration
- Then upgrade to CUCM ver 10
I have one question on this. After I have done the bridge-upgrade on current MCS servers is it still possible to switch-version the CUCM and get CUCM back to ver 7.1.5?
Thanks

When you initiate the upgrade, you can indicate to activate the partition with the new upgrade software or return to using the partition with the previous version of the software at upgrade completion. With the exception of HP 7825H3 and HP7828H3 hardware upgrades, the previous software remains in the inactive partition until the next upgrade. Your configuration information migrates automatically to the upgraded version in the active partition.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/9_1_1/CUCM_BK_UAEC4331_00_upgrade-guide-cucm-91/CUCM_BK_UAEC4331_00_upgrade-guide-cucm-91_chapter_01.html#CUCM_RF_S5
600AEB_00
HTH
Manish

Does an CUCM upgrade affect the device defaults?

Hello
we intend to do an CUCM upgrade from 9.1(2) to 9.2(2)SU2a.
However, our phones have the firmware 9-4-2-1S, different from the original firmware (9-3-1-SR2-1)
After the CUCM upgrade, will the device defaults get back to its original firmware version (9-3-1-SR2-1) or the current version will be kept?
Thank you
Marcos

Hi Marcos,
Yes, When you upgrade to a newer version of CUCM the phones will upgrade/downgrade to the Firmware version listed in the readme doc for the CUCM upgrade version as I have linked below. So in your case the the CUCM readme for 9.1(2)su2 is shown here;
http://www.cisco.com/web/software/282074295/116350/cucmreadme912su2a.pdf
In 9.1(2)su2 it looks like the Device defaults would be 9.3(1SR4.1) but it looks like the Device defaults in CUCM 9.1(2)su3 would be the same as what you are currently running so you would be good to go as they are 9.4(2.1) ;
http://www.cisco.com/web/software/282074295/122683/cucm-readme-912su3.pdf
You could also copy the current device defaults into something like notepad and re-enter them after the upgrade, but if it were me, I would go with the later CUCM version 9.1(2)su3.
Cheers!
Rob

CUCM Upgradation - DMA Error

Similar Messages

Maybe you are looking for