CUCM upgrade 8.6 to 10.5 7500 user OVA

Hello,
I'm planning a CUCM upgrade from version 8.6 to 10.5 (both virtualized)   This was deployed using the 7500 user OVA.   In 10.5, the HDD requirement has changed from 2x80 to 1x110.   According to the upgrade guide, I can resize my drives using disk expansion COP file.   My question is, what should the end result be of my drive changes?   Do I change both drives so I end up with 2x110 or do I only change one leaving me with 1x110 and 1x80?
I don't have enough CPU resources to create new VMs and migrate using PCD.
Thanks,
Glenn

Hi Glenn,
My understanding is that the COP file is used to regain used space within the VM in the sense that you do not have enough space to proceed with the upgrade to 10.5.  The COP file essentially removes your inactive partition in order to gain that needed space.  As long as there is enough free space to complete the upgrade I wouldn't modify the drive structure of the VM in question.
Hope this helps
Tony
Please rate helpful posts

Similar Messages

  • CUCM upgrade from 7.1.5 to 10.5.1.10000-7

    Is it possible to do the migration from 7.1.5 to 10.5.1.10000-7 which we are doing for jump upgrade from 7.1.5 to 9.1.2. 
    The reason why I preferred because this jump upgrade we can achieve in isolated network.
    In that case can anybody please help to get specific document for that. Kindly have a look on this case.
    Regards,
    Abi

    You can use prime collaboration deployment. PCD will do your upgrade and migration without doing any jump upgrade or intermediate upgrade..
    Please refer to the vide below.
    https://www.youtube.com/watch?v=JzG4kz1_hL4
    All upgrade documentation are available on cisco. Take some time and look at the CUCM 10.5 upgrade document
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/10_0_1/CUCM_BK_U4214F9D_00_upgrade-guide-cucm-100.html

  • CUCM Upgrade from 8.6(2a) / 8.6.2.20000-2 to 8.6.(2a)SU2 (8.6.2.22900-9)

    I'm getting ready to upgrade a client's CUCM cluster from 8.6(2a) / 8.6.2.20000-2 to 
    8.6.(2a)SU2 (8.6.2.22900-9).  They use extension mobilty with UCCX version 8.5.1.11003-32.
    Does anyone know of any issues with ugprading this cluster vis a vis their UCCX version ?
    The current CUCM Version 8.6(2a) / 8.6.2.20000-2 shows a JTAPI shows the following JTAPI version:
    admin:show packages active cm-jtapi-
    Active Side Package(s): for cm-jtapi- package(s)
    cm-jtapi-plugin-8.6.2.10000-2
    From the ReadMe For Cisco Unified Communications Manager Release 8.6(2a)SU2
    http://www.cisco.com/web/software/282074295/93949/cucm-readme-862asu2.pdf
    I see that it shows:
    cm-jtapi-plugin-8.6.2.10000-10.i386.rpm
    Once I have performed the CUCM upgrade - do I need to upgrade the JTAPI plugin on the UCCX Platform?
    TIA

    Mohamed,
    I have not actually peformed the upgrade yet.  If you have done so - please reply with any lessons learned that you have.
    I would upload the file to all the servers in your cluster prior to your upgrade maintenance window.  This should not be service impacting.
    Then during your upgrade maintenance window -
    Step 15 Once the Publisher and the subscribers have been upgraded, a version switch must be completed so                  the servers reboot to the new upgraded partition as follows;
    Web Browse to the Publisher’s OS Administration GUI
    To restart the system and activate the upgrade, choose Settings > Version; then, click Switch Version.
    The system restarts and should be running the upgraded software. Once the Publisher is accessible, proceed with the subscribers.
    Good Luck,
    Amir

  • UCCX After CUCM Upgrade

    Hi All
    I am running UCCX 8.5.1.11004-25 and upgrading to CUCM 8.6.2.23900. I have completed several CUCM upgrades with various dependencies but never with UCCX as a dependency. I have checked the compatibility matrix and this all seems fine however i cant find any information on if anything needs to be done to UCCX once i switch versions on CUCM.
    Im suspecting that i will need to run a JTAPI re-sync which will download a new JTAPI if it finds a different version ? Is this correct and also is there anything else i need to be watching out for ?
    Thanks, Carl Ratcliffe

    Thanks Tanner, quick reply and confirmed what i thought, just didnt want to get caught out at 2 in the morning with something i have missed.
    Thanks, Carl

  • ELM shows insufficient licenses after CUCM upgrade from 9 to 10.0.1

    Hi All,
    I just finished upgrading cucm 9 to cucm 10.0.1. Upgrade completed successfully, but elm now shows insufficient license message.
    This is a Vmware installation BTW, I doubt that it matters the CUCM 901 worked fine with its ELM.
    The ELM is coresident with CUCM. I though that upgrading CUCM will upgrade ELM too, but the Dashboard says to upgrade to latest version of ELM.
    When I ordered upgrade through UCSS and downloaded all the files that were included in this upgrade order, one of the files was CiscoPrimeLM_64bitLnx_10.0.1.10000-19.sgn.iso.
    I tried to use CUCM OS administration with this file to upgrade ELM, but OS Administration doesn't recognize it as a valid file.
    The file that I used for CUCM upgrade was: UCSInstall_UCOS_10.0.1.10000-24.sgn.iso 
    So at this point I'm not sure whether ELM needs to be upgraded or I need new licenses for CUCM version 10.
    Thanks
    Yury Brodsky
    Telecommunications Specialist
    AudioCodes
    27 Worlds Fair Drive
    Somerset, NJ 08873
    Direct: 732-652-2162
    Fax: 732-469-2298
    Email:     [email protected]
     

    Upgrading co-res CUCM should have upgraded your ELM as well.  It should now show as Prime License Manager when you log in.  I'm guessing you just don't have any CUWL 10.x licenses installed.  Can you attach a screenshot of the License Usage page in PLM?
    You may need to email [email protected] to move your 9.x licensing to 10.x licenses.

  • CUCM upgrade in UCCE environment

    We have a CUCM cluster(v6.1.2) for our UCCE environment (ICM v7.2.5). I need to upgrade the CUCM to version 6.1.3 (due to the DST bug). Can someone tell me which components in UCCE that I will need to upgrade and/or modify for this CUCM upgrade? Or at least point me to a document that outlines this?
    thanks,
    Brian

    You would probably have compatibility without any UCCE change, but the recommended task is to download the updated JTAPI Client plugin from your upgraded CUCM and overwrite what is there on your PGs.
    That is all.
    Regards,
    Geoff

  • CUCM Upgrade 7.1.5 to 10

    Hi All,
    We are planing to do a 4 server CUCM upgrade (physical to  VM) from ver 7.1.5 to ver 10. Below is the plan
    - Upgrade the CUCM on current MCS servers to ver 9 (bridge upgrade) and take a DRS backup
    - Install CUCM ver 9 on VM and perform the backup restoration
    - Then upgrade to CUCM ver 10 
    I have one question on this. After I have done the bridge-upgrade on current MCS servers is it still possible to switch-version the CUCM and get CUCM back to ver 7.1.5?
    Thanks

    When you initiate the upgrade, you can indicate to activate the partition with the new upgrade software or return to using the partition with the previous version of the software at upgrade completion. With the exception of HP 7825H3 and HP7828H3 hardware upgrades, the previous software remains in the inactive partition until the next upgrade. Your configuration information migrates automatically to the upgraded version in the active partition.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/9_1_1/CUCM_BK_UAEC4331_00_upgrade-guide-cucm-91/CUCM_BK_UAEC4331_00_upgrade-guide-cucm-91_chapter_01.html#CUCM_RF_S5
    600AEB_00
    HTH
    Manish

  • Does an CUCM upgrade affect the device defaults?

    Hello
    we intend to do an CUCM upgrade from 9.1(2) to 9.2(2)SU2a.
    However, our phones have the firmware 9-4-2-1S, different from the original firmware (9-3-1-SR2-1)
    After the CUCM upgrade, will the device defaults get back to its original firmware version (9-3-1-SR2-1) or the current version will be kept?
    Thank you
    Marcos

    Hi Marcos,
    Yes, When you upgrade to a newer version of CUCM the phones will upgrade/downgrade to the Firmware version listed in the readme doc for the CUCM upgrade version as I have linked below. So in your case the the CUCM readme for 9.1(2)su2 is shown here;
    http://www.cisco.com/web/software/282074295/116350/cucmreadme912su2a.pdf
    In 9.1(2)su2 it looks like the Device defaults would be 9.3(1SR4.1) but it looks like the Device defaults in CUCM 9.1(2)su3 would be the same as what you are currently running so you would be good to go as they are 9.4(2.1) ;
    http://www.cisco.com/web/software/282074295/122683/cucm-readme-912su3.pdf
    You could also copy the current device defaults into something like notepad and re-enter them after the upgrade, but if it were me, I would go with the later CUCM version 9.1(2)su3.
    Cheers!
    Rob

  • Is it possible upgrade SAP HANA DB without system/root user??

    Hi All,
    I am supporting banking client.
    they are expecting to do SAP HANA upgrade(from OS or with HLM) .
    even some time patch Kernels also.
    my question is can we upgrade the SAP HANA system with SYSTEM user and root from OS(create different user which can support this process?)  .
    as per SAP HANA Master Update Guide.
    You have user names and passwords for the following users
    ○<sid>adm user
    ○sapadm user
    ○S-user for the SAP Service Marketplace (SMP)●
    but we need "SYSTEM" use to do upgrade process?.
    with HLM: attaching info
    Thanks
    Ravindar

    Dear Rahul,
    thank you for the response.
    But... if we activate and install a demo license on the customer's server, how can we upgrade its old SAP B1 2007 database?
    Do we have to download a last SBO 8.8 PL (i.e. PL 19) and run the upgrade wizard of this PL to upgrade COMMON db, SAP server, etc... and the old SBO 2007 cusomer db?
    Can we directly upgrade old SBO 2007 db to SBO 8.8 PL 19 or we must before upgrade to an intermediate PL (i.e. PL 14) and later upgrade to PL 19?
    Regards
        Emanuele

  • I am using iPhone 4 : i OS 7. When the phone is in sleep mode i cannot disconnect unwanted incoming call, Is there any upgrade coming for this for iPhone 4 users

    Dears,
    I am using iPhone 4 : i OS 7. When the phone is in sleep mode i cannot disconnect unwanted incoming call, Is there any upgrade coming for this for iPhone 4 users. How this can be sorted

    Hello Bibhore,
    Calls can be declined by hitting the sleep/wake button twice quickly.
    Decline a call and send it directly to voicemail. Do one of the following:
    Press the Sleep/Wake button twice quickly.
    iPad User Guide - When someone calls
    http://help.apple.com/ipad/7/
    Cheers,
    Allen

  • ** Ugrent --CUCM Upgrade 8.6 to 10.5 issue **

    Hello all,
    We have upgraded CUCM from 8.6 to 10.5 (direct upgrade).
    After upgrade we cant make changes into CUCM Publisher. While adding phones or device profile we are facing following error:
    Add failed. The Insert privilege is required for this operation.
    Also, our Cisco Unified Attendant Console Enterprise Addition sync with CUCM is not successful.
    CTI RoutePoint & CTI Ports are not registered gone into unknow state.
    Attached are Attendant console enterprise CUCM sync reports screen shot.
    DB Replication for whole cluster is good with value 2.
    Need urgent help - our system is in production now & we dont have cisco support agreement at the moment.
    Regards,

    Here are the install logs:
    admin:file view install system-history.log
    =======================================
    Product Name -    Cisco Unified Communications Manager
    Product Version - 10.5.1.10000-7
    Kernel Image -    2.6.32-431.3.1.el6.x86_64
    =======================================
    09/12/2014 22:16:31 | root: Install 10.5.1.10000-7 Start
    09/12/2014 15:45:21 | root: Boot 10.5.1.10000-7 Start
    09/13/2014 02:17:53 | root: Install 10.5.1.10000-7 Success
    09/13/2014 02:17:54 | root: Boot 10.5.1.10000-7 Start
    09/13/2014 02:41:59 | root: DRS Restore UCMVersion:10.5.1.10000-7 Start
    09/13/2014 02:55:15 | root: DRS Restore UCMVersion:10.5.1.10000-7 Error
    09/13/2014 03:06:55 | root: Boot 10.5.1.10000-7 Start
    09/13/2014 03:16:24 | root: DRS Restore UCMVersion:10.5.1.10000-7 Start
    09/13/2014 03:55:07 | root: DRS Restore UCMVersion:10.5.1.10000-7 Success
    09/13/2014 03:59:19 | root: Boot 10.5.1.10000-7 Start
    09/13/2014 06:16:40 | root: DRS Restore UCMVersion:10.5.1.10000-7 Start
    09/13/2014 06:21:33 | root: DRS Restore UCMVersion:10.5.1.10000-7 Error
    09/13/2014 09:31:10 | root: DRS Backup UCMVersion:10.5.1.10000-7 Start
    09/13/2014 10:09:25 | root: DRS Backup UCMVersion:10.5.1.10000-7 Success
    09/14/2014 12:38:48 | root: Restart 10.5.1.10000-7 Start
    options: q=quit, n=next, p=prev, b=begin, e=end (lines 1 - 20 of 21) :
    admin:
    admin:

  • CUCM upgrade 8.6 to 10

    Hi
    will update the version 8.5 to version 10
    I have a question I hope you can help me.
    I can directly upgrade from version 8.5 to 10
    Upgrade to version 10 first I have to upgrade to version 9?
    I need licensing for the upgrade? If yes, what kind of licensing need
    if I have a CCX CUCM version 8.6 and version 10, can be operated simultaneously or me creates problems ??
    it is necessary that all virtual machines (CUCM, IM, PRESENCE, CCX) run the same version is ccx CUCM 10 and 10.
    are the procedure for good update.
    Some documentation to recommend me.
    I am at your service.
    Greetings.

    The upgrade guide and compatibility doc for 10.x cover upgrade paths
    Your licenses will be migrated to PLM, you can reach [email protected] if you need further assistance
    The UCCX compatibility matrix covers all the details about UCCX version and CUCM compatible releases, you need to review it.
    CUCM and IM&P need to be in the same major release, at the X.Y level in most releases, except 10.5(2) which is only compatible with 10.5(2). As for UCCX, see above.
    For the upgrade you need to review for every product:
    A) RNs
    B) Upgrade guide
    C) Changed and new info doc, either as standalone or sometimes with the RNs
    ALL the above information is available on cisco.com for you to review.

  • CUCM Upgradation from 8.6 to 9.1

    Hi
    when we upgrade cucm 8.6 to 9.1, can we use the same 9.1 iso file which we wre using for the full installation?
    Thanks in Advance....

    Hi Midhun,
    You need to use an upgrade file, not the bootable file that you use for fresh installation. You can either request it through the PUT tool or you can download it from the following link
    http://software.cisco.com/download/release.html?mdfid=284510097&flowid=45900&softwareid=282074295&release=9.1%282%29SU1&relind=AVAILABLE&rellifecycle=&reltype=latest
    HTH
    Manish

  • CUCM Upgrade to 9.1.2.13900-10

    Dear Team,
    I am planning to upgrade CUCM  from 9.1.2.10000-28   to  UCSInstall_UCOS_9.1.2.13900-10.sgn .
    Please share with me the upgradation steps and documents  ?
    Thanks

    Hi Waqas,
    please follow the steps for doing minor upgrade
    a. You need to take the backup of existing CUCM 9.1.2.10000-28
    b. After u download the patch, do verify the MD5 checksum.
    c.Upload first it in Publisher through OS administration: Software Upgrades--Install/upgrade
    d. Upload now in Subscriber.
    e. Switch over  to 9.1.2.13900-10  from CLI using command utils system  switch version
    f. follow the same for Subscriber as well.
    http://www.cisco.com/web/software/282074295/122683/cucm-readme-912su3.pdf
    regds,
    aman

  • UCCX and CUCM Upgrade

    Hi All - We are planning to go for CUCM direct upgrade from 7.1.3 - 9.1.2
    Also for UCCX from 7.0.1 SR5 ---> 8.5.1 --> 8.5.1 SU3 --> 9.0.2
    During upgarde of UCCX 8.5.1 on UCS Machine it will ask to eneter CUCM AXL user Credentails which is in 9.1.2, So we need to know is that correct way by doing so since UCCX is 8.5.1 and CUCM 9.1.2
    Also i checked few PDF'S where i can get below info.
    These Unified CM versions are supported - 8.0(1), 8.0(2) and all SUs, 8.5(1) and all SUs, and Unified CM 8.6.2.22033 and later.
    Does it mean CUCM 9.1.2 is compatible with UCCX 8.5.1 and 8.5.1 SU3.
    SIVANESAN R       

    Refer to this document for all CCX compatibility details including which version you can upgrade from:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
    CUCM 9.1.2 is compatible with CCX 8.5SU4 for example.
    Also, you can upgrade to CCX 9.0.2 directly from 7.0.2ES3.
    HtH,
    Chris

Maybe you are looking for